Related
View attachment 923053so here's my story;
i rooted my transformer a while back and was messin around with nvflash and got it semi-bricked, so i flashed the nvflash stock rom and it saved my ass. so i stayed on stock unrooted for a while (it's been about a month), but i was on a previous firmware, i think 8.5.6.19, so i headed over to asus's download website, got the .21 firmware and updated my tab to that about a week ago.. so im on 8.6.5.21, US sku tf101 (NOT tf101g). Any thoughts to why i haven't recieved a notification to update to ICS? i rebooted, fully discharged and recharged, and checked the forums... plus Ive been mashing the "check update" button for two days now....... -_- if anyone has a non-root solution, it would be greatly appreciated. Thanks in advance!
View attachment 923053
Sent from my Transformer TF101 using xda premium
There is a prerooted version of ice available in the Dev subforum. I used that to upgrade.
Sent from my NookColor using Tapatalk
jerrykur said:
There is a prerooted version of ice available in the Dev subforum. I used that to upgrade.
Thanks for the reply!
Did that require clockworkmod? Cause i'm on the stock rom with stock recovery...
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Do you have CWM Recovery (or non-stock recovery) installed? This will block OTA updates.
Beyond that, try going to Settings - Apps - Manage - All - DMClient - Force Close then Clear Data. Repeat for CMClient.
Reboot.
Check for updates.
frederuco said:
Do you have CWM Recovery (or non-stock recovery) installed? This will block OTA updates.
Beyond that, try going to Settings - Apps - Manage - All - DMClient - Force Close then Clear Data. Repeat for CMClient.
Reboot.
Check for updates.
Click to expand...
Click to collapse
I'm on completely stock rom, and the recovery is stock as well (i used it to install the update from asus's website.)
I tried your suggestion about clearing Dmclient and Cmclient data after they were force closed. after i rebooted, i waited about 30 seconds then went to check for update and im still getting the "there is no update available for your device currently" message
Anything else i should try?
Sent from my Transformer TF101 using xda premium
Since you can NVflash, suggest you root your device and nvflash CWM. Then install the ICS update floating around through CWM.
zook79 said:
I'm on completely stock rom, and the recovery is stock as well (i used it to install the update from asus's website.)
I tried your suggestion about clearing Dmclient and Cmclient data after they were force closed. after i rebooted, i waited about 30 seconds then went to check for update and im still getting the "there is no update available for your device currently" message
Anything else i should try?
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
You need to do a cold reboot instead of just reboot. You also need to delete the cache for dmclient and cmclient, not just data.
Force stop DMClient, Clear data, Clear cache
Force stop CMClient, Clear data, Clear cache
COLD REBOOT. You do this by powering off your TF(also unplug your power/usb cable) and then starting it up by holding down [volume down] and [power] together. Keep the buttons pressed for at least 6 seconds. Then you will see 2 icons in the center of screen. The right icon is cold reboot and is selected by default. Wait 10 seconds and it will start cold boot automatically.
Check for update.
I think someone mentioned on the forum that ASUS pulled out ICS from the servers - until reboot issue is fixed.
irekz said:
I think someone mentioned on the forum that ASUS pulled out ICS from the servers - until reboot issue is fixed.
Click to expand...
Click to collapse
Stop spreading misinformation.
horndroid said:
Stop spreading misinformation.
Click to expand...
Click to collapse
Only logical to try to stop bugs from spreading further if you're aware of your mistakes???
Thiesen said:
Only logical to try to stop bugs from spreading further if you're aware of your mistakes???
Click to expand...
Click to collapse
The issue isn't whether or not it's "logical," the issue is whether or not it's true. Which it's not.
I have the same problem, .. not OTA ICS love
stock of course
interestingly enough, 2 of my friends got it yesterday, .. but when i tried today, "no update available"
I tried the following
- Cold boot
- C and D clients force close and clear cache + cold boot
- Factory Reset
nothing worked, .. it is as if there is no update what so ever.
guess will have to wait and see, no rush.
if anyone have some suggestions though, throw em at me
cheers
Well no offense but there is a quick and easy method and thats to NVFlash CWM and manually flash it... or sit and wait your turn.
I don't know why people are so afraid to have a "rooted" device. All it does it gives you admin rights to perform tasks typically not allowed to the stock user account. It's like logging on as Administrator to your Windows machine.
The ICS OTA flashable rom running around IS COMPLETELY STOCK with the exception that the user account has admin rights (ie "rooted").
The only MAIN reason to stay completely stock is to get OTA updates first... but as you see this isn't the case. The OTA may not even be available for your area yet. Custom roms only DISABLE the OTA check because it can unroot your phone and cause incompatibilities.
ClockWorkMod also is just a custom recovery which allows for full backup/restoration of your system. CWM is worth nvflashing JUST for that reason alone.
Triplanetary said:
The issue isn't whether or not it's "logical," the issue is whether or not it's true. Which it's not.
Click to expand...
Click to collapse
Maybe its just a rumor, cant verify this, but here is the source:
http://forum.xda-developers.com/showpost.php?p=23024840&postcount=26
i had wiped everything for both clients and had already tried a coldboot and factory reset (from recovery) and still no update.
Of course the easy route would be to root, as i did before, but im actually just wondering why i haven't recieved the update at all... if it isnt resolved in the next 24 hours, ill just root and flash the stock rooted firmware. thanks for the help guys!
Sent from my Transformer TF101 using xda premium.
so i called asus and they said some of the tablets wouldnt get the update yet but that it was definitely on the way. he said that i should wait at least a week...
another thing, he said nothing about asus pulling the update from the server, and was pretty clear that the update was being sent out to the tablets, some were just slower to receive the update
Sent from my Galaxy Nexus using xda premium
Well, in my case i NEVER succeeded to get OTA upgrading, and it is knowing problem in my country (Israel).
You can download the 4.0.3 ICS update from ASUS now...
I just downloaded the .21 update......it did nothing for allowing me to OTA update to ICS. Went back to ASUS and they now had the new ICS update to download. Downloaded and installed.
irekz said:
Maybe its just a rumor, cant verify this, but here is the source:
http://forum.xda-developers.com/showpost.php?p=23024840&postcount=26
Click to expand...
Click to collapse
Well. Well. Well. This is exactly what i read and was referring to yesterday.
tcrews said:
You can download the 4.0.3 ICS update from ASUS now...
I just downloaded the .21 update......it did nothing for allowing me to OTA update to ICS. Went back to ASUS and they now had the new ICS update to download. Downloaded and installed.
Click to expand...
Click to collapse
thanks....
This thread is no longer valid or necessary other than as a guide on how to use Odin. U.S. users that are bone stock should be able to apply the update via OTA or Kies. If anyone's having an issue they can install the U.S. JB ROM by using Odin to manually replace their current U.S. ROM with a completely new copy of the U.S. JB ROM.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Basically what you’re doing is replacing your current PDA (MD5) file with the U.S. 4.1.2 version that's just been released.
To install a ROM it's easiest to use desktop Odin. You can download Odin 1.85 here…
https://www.google.com/search?q=odin+1.85&sourceid=ie7&rls=com.microsoft:en-us:IE-Address&ie=&oe=
Make sure you’ve got Kies installed on your PC because it installs the Windows drivers necessary for Odin to see your device.
Download the full and complete U.S. 4.1.2 JB ROM here…
http://hotfile.com/dl/189276711/f83...GT-N8013-XAR-N8013UEUCMA3-1357740396.zip.html
Unzip the file you downloaded. After it's extracted you should see an MD5 file. That's what you're going to install. Right-click on the Odin EXE file you downloaded and run it as administrator.
Put your device in to “download mode” by turning it off and then restarting it by pressing the power and volume down buttons at the same time. You should see an “are you sure?” message from Samsung. Accept it and your device is now in download mode.
Connect your device to your PC via USB. If the connection’s successful it should look like this…
Next, click on the PDA button and locate the file you extracted and then click start...
You’ll see the update’s progress in the message box in Odin and via a progress bar on your device. When Odin signal’s it’s finished disconnect your device and it will finish installing the new files.
That's it. Your N8013 is now running a fresh install of 4.1.2.
These are the directions I followed - many thanks!!
So, it's confirmed that it won't affect the flash counter for sure? I'm thinking of using the All-Share Cast dongle in the future and it exhibits some strange behavior if the flash counter hasn't been reset...
Will this work on n8000?
Sent from my GT-N8000 using xda app-developers app
Yes it will work the same for all note models but you need to make sure have the firmware for that particular model.
No it will not change your count, you can install stock roms of any regions as many times you want it will not change the count.
Your count will change when you root it or install a custom rom you can easily reset the flash counter
It seemed so simple...followed instructions to the tee. I just got status 7 error. Failed when I tried to flash update.zip from external SD card. Now s note is fc every second. I might have to go return my tablet tomorrow any ideas or help? I am not new to flashing roms but I haven't ever seen this.
Sent from my SPH-L710 using xda app-developers app
Flashing OTA is always tricky, think you were flashing a zip file I would not recomend it.
Also make sure the OTA is for the same version an region as your rom is otherwise it will give you errors
Did you download the N8010XXALI3 version or the N8010XXALGC version as there are two German versions in that list.
Not sure if that would make a difference.
GETCASHMONEY said:
It seemed so simple...followed instructions to the tee. I just got status 7 error. Failed when I tried to flash update.zip from external SD card. Now s note is fc every second. I might have to go return my tablet tomorrow any ideas or help? I am not new to flashing roms but I haven't ever seen this.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
No need to return, go back into recovery and clear the cache. Then reinstall the update. Boot into your tab, it might be a bit laggy at first but let it sit for about 5 minutes DON'T TOUCH IT. Reboot the tab and it should be fine. I had a similar issue, my tab is now flying along. For any fc you get, go into the app and clear all the stored data. IF it continues uninstall and reinstall. Remember, you are going from ICS to Jelly Bean, some apps act differently in Jelly Bean.
Riki
Just to be safe I assume I will be ok if I am rooted and dont have stock recovery. I will just have to reroot. Correct?
After you flash the German stock ICS with Odin you will get back the stock recovery.
Sent from my GT-N8010 using Tapatalk 2
When the official UK one comes out will it be easy to change to that if needed?
Yes. 2 options :
Get back to the stock ics for your region, and wait for samsung ota or
Download jb stock fw for your region from sammobile and flash with odin
Edit: assuming that you are from UK.
Sent from my GT-N8010 using Tapatalk 2
Well I'm currently updating to JB via sd card. However it has been on "Patching remaining system files" for about 15 minutes.
How long should it take?
neonplanet40 said:
Well I'm currently updating to JB via sd card. However it has been on "Patching remaining system files" for about 15 minutes.
How long should it take?
Click to expand...
Click to collapse
Mine seemed to take a few minutrs. After the progress bar on the tablet seemed to stop, I unplugged and held the power button down to reboot. Holding down the power button while holding volume up will eventually boot you into what is called recovery mode. You then select what you want to do by clicking vol up or down to select then push power button to proceed.
Let it finish... even if you have to wait 30 min
Sent from my GT-N8010 using Tapatalk 2
Well, I stopped the fc by clearing s note data. Thanks for the help. I'm still stuck on ics though. When I try to flash update.zip it fails to get build.prop sector 7 or something. I transferred it around a little before installing - it could be corrupted. I am going to re download it directly onto my tablet and try again. Thanks everyone for your help, I really appreciate it.
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 08:33 AM ---------- Previous post was at 08:21 AM ----------
mikemod said:
Did you download the N8010XXALI3 version or the N8010XXALGC version as there are two German versions in that list.
Not sure if that would make a difference.
Click to expand...
Click to collapse
I actually did download the wrong dbt one. I'm downloading the other one to give it a shot.
Sent from my GT-N8010 using xda app-developers app
I got it to work. Thank You for Your help. Jelly Bean is crazy fast I love it!
Sent from my GT-N8010 using xda app-developers app
GETCASHMONEY said:
I got it to work.
Click to expand...
Click to collapse
What do you think happened that made it not work at first and what did you do to fix it? I want to keep the first post updated so people don't brick their devices or have heart attacks during the process.
Will it be possible to download JB update it directly to my tablet without an external SD card?
i received the ota today...when i tried to update. it fail...then it show me the android screen with messege 'no command'...what should i do now?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
minjiet said:
i received the ota today...when i tried to update. it fail...then it show me the android screen with messege 'no command'...what should i do now?
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you are rooted and have StickMount installed or had it installed you might need to replace the \system\bin\debuggerd file before doing the upgrade again.
See also http://forum.xda-developers.com/showthread.php?t=2419468
Search for how to sideload the security update using adb
jalize said:
If you are rooted and have StickMount installed or had it installed you might need to replace the \system\bin\debuggerd file before doing the upgrade again.
See also http://forum.xda-developers.com/showthread.php?t=2419468
Search for how to sideload the security update using adb
Click to expand...
Click to collapse
Ya, i'm rooted, now the n10 cant boot at all....what can i do?
anyone can show me step by step guide?
Or flash the Factory image with a bit editing. This should do: http://forum.xda-developers.com/showthread.php?t=2377307
Sent from my Galaxy Nexus using XDA Premium HD app
I got that as well on my N10. Stock, stock recovery rooted. Booting into recovery didn't help. The next morning it was the same thing, but after a while it shut itself off and when I was ready to flash a stock img, had the USB cable plugged into the laptop, I look at the N10 and it's booting just fine, then starts applying the update.
Not helpful I know, but just wanted to let you know it fixed itself, I did nothing. Good luck.
Same problem on stock rooted. Impossible to boot and to switch off the device. I've wait the nexus shut down by himself and after the update have been automaticaly installed on the boot. I'm always rooted. Strange.
Use http://www.afterdawn.com/software/s...l_devices/nexus_root_toolkit.cfm#all_versions app is the best to fix and very easy
Sent from my Nexus 10 using XDA Premium 4 mobile app
---------- Post added at 06:01 PM ---------- Previous post was at 05:58 PM ----------
A fixed all my problems, i am on stock with the same problem on jelly bean 4.3, now rooted and again with a custom recovery.
Sent from my Nexus 10 using XDA Premium 4 mobile app
thanks for the help...my n10 back to normal automatically after i plug in charger...weird
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Okay, something pretty similar happened to me twice now. I'll share what I saw and did.
Unboxed brand new n10 and immediately went through the process to unlock and root it. I did *not* install a custom recovery.
After a couple of hours playing, it prompted me to install an update. I *think* it was actually on 4.2 before and this was the update to 4.3.
Applied the update and it rebooted and went to the "No Command" screen. As others stated, it felt very stuck.
I eventually gave up and figured it was soft-bricked so I use the Nexus Root Toolkit to download and install a factory fresh 4.3 (v). Lost all my customizations.
Fast forward to this morning. It prompted me for a new update to 4.3. I made a full backup using Nexus Root Toolkit and tried it, but again, it just got stuck on the "No Command" screen.
This time, I tried pressing all three buttons (power, vol down, vol up) quickly, but it did not bring up the stock recovery screen until I actually pressed them in order, (power, vol down [next to power], vol up [farthest from power]). At that point it brought up the recovery menu and I selected the option to wipe cache.
It took a while, but after wiping, I rebooted and it went straight into Android without a problem and it *looked* like it finished the upgrade. Oddly, it still reports it is 4.3 (v) rather than 4.3 , so i don't know if I ended up aborting the upgrade or if it was just trying to re-install (v) for some reason.
DEinspanjer said:
Okay, something pretty similar happened to me twice now. I'll share what I saw and did.
Unboxed brand new n10 and immediately went through the process to unlock and root it. I did *not* install a custom recovery.
After a couple of hours playing, it prompted me to install an update. I *think* it was actually on 4.2 before and this was the update to 4.3.
Applied the update and it rebooted and went to the "No Command" screen. As others stated, it felt very stuck.
I eventually gave up and figured it was soft-bricked so I use the Nexus Root Toolkit to download and install a factory fresh 4.3 (v). Lost all my customizations.
Fast forward to this morning. It prompted me for a new update to 4.3. I made a full backup using Nexus Root Toolkit and tried it, but again, it just got stuck on the "No Command" screen.
This time, I tried pressing all three buttons (power, vol down, vol up) quickly, but it did not bring up the stock recovery screen until I actually pressed them in order, (power, vol down [next to power], vol up [farthest from power]). At that point it brought up the recovery menu and I selected the option to wipe cache.
It took a while, but after wiping, I rebooted and it went straight into Android without a problem and it *looked* like it finished the upgrade. Oddly, it still reports it is 4.3 (v) rather than 4.3 , so i don't know if I ended up aborting the upgrade or if it was just trying to re-install (v) for some reason.
Click to expand...
Click to collapse
When you cleared cache you lost the update package I believe, so it didn't update, when I received my OTA I had TWRP installed and it went through nicely. Maybe you should try it and then installing Stock Recovery again.
"This Story Ends Where It Began" - Octavarium (Dream Theater)
Sent from my GT-I9505
I have a Nexus 10. I just took and installed the OTA that arriced 08/27/2013. I am not rooted or unlocked. It is only a wifi (not a carrier specific).
I have been sick since i took the first Ota several weeks ago. I was constantly having to reboot because it would drop the connection. Firefox was useless. And above all, I was unable to get Grassland Live wallpaper and Wind Turbine 3D to work.
It all works now!
Sent from my Nexus 10 using xda app-developers app
I just read in another thread that the issue as described is caused by apply the OTA when rooted. Just unroot then apply the OTA update and reboot. Assuming you are using SuperSU., it has an unroot option in the settings panel.
Good luck.
Post here if you received the OTA after initially being declined on the first phase.
Sent from my HTC O'ne-xus
Still no OTA .. how long does phase 2 last ?
Izzymane said:
Still no OTA .. how long does phase 2 last ?
Click to expand...
Click to collapse
Until phase 3.
Why not download the zip and flash it like the rest of us?
Because when I tried my phone would boot only into recovery
still waiting here. sideload fails. (check cid failed) and im 100% stock, real GPe purchased new from Google Play store.
nothing yet... uk
Sent from my HTC One using XDA Premium 4 mobile app
Just so you know when you download the OTA it will download the same zip and boot into recovery for you. If you get some sort of errors now you will get them when you try to install the OTA. Best way to install it is to re-install 4.3 stock and than the 4.4 OTA zip.
Seen people mention even with genuine stock gpe's have failures with side loading.
Due to these issues i decided to wait.
Hopefully we can identify when phase 2 starts.
Sent from my HTC O'ne-xus
pr0x2 said:
Just so you know when you download the OTA it will download the same zip and boot into recovery for you. If you get some sort of errors now you will get them when you try to install the OTA. Best way to install it is to re-install 4.3 stock and than the 4.4 OTA zip.
Click to expand...
Click to collapse
i never thought about this. my phone is 100% stock purchased from Google. I got the 4.3 OTA just fine back when it came out.
why the issue now?
If people want it they just need to go stock 4.3 unrooted with stock recovery. Download the zip and push it to the sdcard. Boot into recovery, hold vol h and press power. I got an sdcard mount failure 5 times then a menu. Choose load from phone storage and select the ota zip you pushed.
Sent from my HTC One using Tapatalk
Donjuanal said:
If people want it they just need to go stock 4.3 unrooted with stock recovery. Download the zip and push it to the sdcard. Boot into recovery, hold vol h and press power. I got an sdcard mount failure 5 times then a menu. Choose load from phone storage and select the ota zip you pushed.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
yes yes its so simple. you clearly arent reading the posts where people are stating this isnt working. even on stock real GPe already running stock 4.3 unrooted.
Im on an ATT converted model and it worked just fine for me. I find it hard to believe its not working on legitimate GPe devices.
Sent from my HTC One using Tapatalk
Donjuanal said:
Im on an ATT converted model and it worked just fine for me. I find it hard to believe its not working on legitimate GPe devices.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
you can find it hard to believe...or you can just read around and see that we cannot flash it
CraigP17 said:
you can find it hard to believe...or you can just read around and see that we cannot flash it
Click to expand...
Click to collapse
You need S-OFF to manually flash an OTA file, regardless of the phone being an official GPe or a Sense-based phone. No S-OFF, no manual flash
hTC_102...converted to GPE...unlocked, s-off, rooted...just temporary unrooted and installed the OTA from Stock recovery...works...
I received the OTA, and it soft-bricked my phone. Fortunately, I was able to get into bootloader and just ran the RUU...
Upgraded fine
Mine just updated fine in the uk
marantz69 said:
Mine just updated fine in the uk
Click to expand...
Click to collapse
I've converted my one to GE, s-ff, cid GOOGL001, flashed 4.3 RUU, only received 4.3(JWR66Y.H1) update, no 4.4 yet(
mih3y said:
I've converted my one to GE, s-ff, cid GOOGL001, flashed 4.3 RUU, only received 4.3(JWR66Y.H1) update, no 4.4 yet(
Click to expand...
Click to collapse
if you have s-off, just sideload the OTA
Before downloading the OTA from the below link, please take note:
1. This is an OTA update (not the full firmware). This means that...
2. You should read the whole OP of this thread: http://forum.xda-developers.com/show....php?t=2639102
3. I am not taking responsibility for bricked devices.
4. This ZIP is not flashable via TWRP/CWM/PhilZ...stock recovery is required.
Here is the download link: http://goo.gl/D14Q5X
Thanks to nomad 64 for this.
I went through the update on my device. As it has been noted before, stock recovery is required. However, I did keep root through the process...woot!
Can I flash just stock recovery without flashing anything else, and if yes were can I find it
Sent from my XT1056 using xda app-developers app
nomad64 said:
Ditto. I am putting it on my server now to help mirror.
I went through the update on my device. As it has been noted before, stock recovery is required. However, I did keep root through the process...woot!
Click to expand...
Click to collapse
Just curious... how did you root? unlock your bootloader and use customer recovery and SuperUS? or did you use SlapMyMoto? if Slap... I've seen reports of still having root, but write protection being enabled again so you can't do anything with /system and the like..
I'm on Verizon not Sprint but I still consider this progress, happy and a little jealous of you guys!
Sent from my XT1060 using Tapatalk
charlie-n said:
Can I flash just stock recovery without flashing anything else, and if yes were can I find it
Sent from my XT1056 using xda app-developers app
Click to expand...
Click to collapse
Yes. Reference the "Returning to Stock" section of this thread: http://forum.xda-developers.com/showthread.php?t=2603358. You have to download the whole firmware package for sprint, which sucks because you only need one file. After you have done what you need to do with TWRP/CWM, reboot your phone into the bootloader, then simply run
Code:
fastboot flash recovery recovery.img
fastboot reboot
KidJoe said:
Just curious... how did you root? unlock your bootloader and use customer recovery and SuperUS? or did you use SlapMyMoto? if Slap... I've seen reports of still having root, but write protection being enabled again so you can't do anything with /system and the like..
Click to expand...
Click to collapse
I unlocked my bootloader and flashed SuperSU. I live life on the edge!
At the time of the upgrade, I had flashed stock recovery and unfrozen Sprint Zone. I had also completely removed Xposed (uninstalled modules, disabled Xposed, and flashed Xposed-disaper.zip). I still had other root apps installed when I took the upgrade (TitaniumBackup and ROM Toolbox Pro). I have verified that they still work post-upgrade without additional work on my end.
If someone gets a copy of the ota zip faster than i upload it please message me a copy of your link and i will update the original post with it.
Dang it! Where's the AT&T one! First to get the phone, last to get the update.
jeffgt14 said:
Dang it! Where's the AT&T one! First to get the phone, last to get the update.
Click to expand...
Click to collapse
You won't be the last Verizon will haha
Sent from my XT1060 using Tapatalk
nomad64 said:
I unlocked my bootloader and flashed SuperSU. I live life on the edge! .
Click to expand...
Click to collapse
Cool. That is what I expected, and even if you lost root, you can just redo the custom recovery & SuperSU to get root back.
nomad64 said:
Yes. Reference the "Returning to Stock" section of this thread: http://forum.xda-developers.com/showthread.php?t=2603358. You have to download the whole firmware package for sprint, which sucks because you only need one file. After you have done what you need to do with TWRP/CWM, reboot your phone into the bootloader, then simply run
Code:
fastboot flash recovery recovery.img
fastboot reboot
Click to expand...
Click to collapse
Just to confirm, this won't delete anything from the phone, just go back to stock recovery, correct?
Thanks for posting this just updated my phone
Sent from my XT1056 using Tapatalk
At the risk of sounding like a newbie, what are the steps to perform the update. I am coming from a Galaxy S4 and have only did OTA updates as they came. I just got this Moto X about 3 weeks ago during the $299 off contract price (couldn't resist). I would love to go ahead and do the update. My Moto X is stock, unrooted. Thanks
kbboykin said:
At the risk of sounding like a newbie, what are the steps to perform the update. I am coming from a Galaxy S4 and have only did OTA updates as they came. I just got this Moto X about 3 weeks ago during the $299 off contract price (couldn't resist). I would love to go ahead and do the update. My Moto X is stock, unrooted. Thanks
Click to expand...
Click to collapse
Settings - about phone - software update
MOTO X Slapped
[email protected] said:
Settings - about phone - software update
MOTO X Slapped
Click to expand...
Click to collapse
That, I know. I am asking about this file in the OP initial post, manually updating.
shaya4207 said:
Just to confirm, this won't delete anything from the phone, just go back to stock recovery, correct?
Click to expand...
Click to collapse
Correct. It will put you back on stock recovery and reboot your phone. Nothing in your /system or /sdcard will be touched. This is what I did to get back to stock recovery.
kbboykin said:
That, I know. I am asking about this file in the OP initial post, manually updating.
Click to expand...
Click to collapse
You need to have a completely stock system and the stock recovery installed. I manually flashed with super user still installed just fine but everything has to be completely stock straight out the box. To manually update you just download the zip in the OP.
1 boot into boot loader by holding volume down and power button
2 use volume key to scroll down to recovery press volume key up will put you into stock recovery with the red triangle.
3 to get to the menu screen in stock recovery you must hold volume key up then press power
4 choose to install from SD card and navigate to where the zip downloaded in this screen power button is used to select your choice. I moved the zip to the root of my SD but it usually will be found in downloads.
5 push power button to install ota manually. Be patient it will take a minute
I had it abort on me first try cause I forgot to change my fonts back to stock so be sure you are bone stock no tweaks or even V4A installed with STOCK RECOVERY.
Sent from my XT1056 using Tapatalk
dandan2980 said:
You need to have a completely stock system and the stock recovery installed. I manually flashed with super user still installed just fine but everything has to be completely stock straight out the box. To manually update you just download the zip in the OP.
1 boot into boot loader by holding volume down and power button
2 use volume key to scroll down to recovery press volume key up will put you into stock recovery with the red triangle.
3 to get to the menu screen in stock recovery you must hold volume key up then press power
4 choose to install from SD card and navigate to where the zip downloaded in this screen power button is used to select your choice. I moved the zip to the root of my SD but it usually will be found in downloads.
5 push power button to install ota manually. Be patient it will take a minute
I had it abort on me first try cause I forgot to change my fonts back to stock so be sure you are bone stock no tweaks or even V4A installed with STOCK RECOVERY.
Sent from my XT1056 using Tapatalk
Click to expand...
Click to collapse
Thanks, this is what I was looking for. I am completely stock except for apps dl'd from Play Store and Amazon.
kbboykin said:
Thanks, this is what I was looking for. I am completely stock except for apps dl'd from Play Store and Amazon.
Click to expand...
Click to collapse
That's OK with the apps from the play store and amazon just things like exposed modules and viper 4 android have to be uninstalled basically anything that modifies your system cannot be installed. I did have Super user installed when I applied the ota with no problems though
Sent from my XT1056 using Tapatalk
dandan2980 said:
That's OK with the apps from the play store and amazon just things like exposed modules and viper 4 android have to be uninstalled basically anything that modifies your system cannot be installed. I did have Super user installed when I applied the ota with no problems though
Sent from my XT1056 using Tapatalk
Click to expand...
Click to collapse
SuperSU or Superuser, and what version if SuperSU. Last time I checked, SuperSU installed another system file incase the daemon method needed to be used.