OTA Update with Fido: is it Tango? - Focus General

I received a notification for an update today and installed it with Zune.
OS: 7.10.8773.98
Firmware: 2124.11.9.4
Hardware is 3.1.0.7
Radio software is now 2124.11.9.3
Radio hardware is 0.0.0.3
Bootloader is 5.9.2.2
Chip SOC is 0.36.2.0

tekbrain said:
I received a notification for an update today and installed it with Zune.
OS: 7.10.8773.98
Firmware: 2124.11.9.4
Hardware is 3.1.0.7
Radio software is now 2124.11.9.3
Radio hardware is 0.0.0.3
Bootloader is 5.9.2.2
Chip SOC is 0.36.2.0
Click to expand...
Click to collapse
Yes, it is Tango update.

Pl. help
I have AT&T unlocked phone Samsung Focus using on Fido. I have 7.5 but i still haven't received the update. Please help
---------- Post added at 03:48 PM ---------- Previous post was at 03:42 PM ----------
BigwaveMx said:
Yes, it is Tango update.
Click to expand...
Click to collapse
I have At&t unlocked samsung focus running on 7.10.7720.68. I am on Fido and still not received any updates yet. Any idea?

yetlivin said:
I have AT&T unlocked phone Samsung Focus using on Fido. I have 7.5 but i still haven't received the update. Please help
---------- Post added at 03:48 PM ---------- Previous post was at 03:42 PM ----------
I have At&t unlocked samsung focus running on 7.10.7720.68. I am on Fido and still not received any updates yet. Any idea?
Click to expand...
Click to collapse
That's because the firmware is AT&T, not Fido.
You need to regedit (also read here):
"HKLM\System\Platform\DeviceTargetingInfo\MobileOperator"
Change from "ATT-US" to "ROG-CA" (no quotes)

Thanks but I cannot install any registry editor xap
When i bought from Amazon it said unlock, its an At&t branded phone but I just put my fido sim card and its working.
What should I do? I don't know how to do interop unlock?
EnderPsp said:
That's because the firmware is AT&T, not Fido.
You need to regedit (also read here):
"HKLM\System\Platform\DeviceTargetingInfo\MobileOperator"
Change from "ATT-US" to "ROG-CA" (no quotes)
Click to expand...
Click to collapse

yetlivin said:
When i bought from Amazon it said unlock, its an At&t branded phone but I just put my fido sim card and its working.
What should I do? I don't know how to do interop unlock?
Click to expand...
Click to collapse
The firmware is update is to be released through the carrier that released the phone (in this case AT&T - not the one you're using the phone on).
Just follow the instructions here for interop unlock. If you're a beginner, also read the post in my sig.

Thanks, but now what to do?
EnderPsp said:
The firmware is update is to be released through the carrier that released the phone (in this case AT&T - not the one you're using the phone on).
Just follow the instructions here for interop unlock. If you're a beginner, also read the post in my sig.
Click to expand...
Click to collapse
I did interop unlock, downloaded the samsung registry and under path value I typed in HKLM\System\Platform\DeviceTargetingInfo\MobileOperator
and selected String and tapped Read and changed to ROG-CA
I restarted my phone and again went to samsung registry and under path value I typed in HKLM\System\Platform\DeviceTargetingInfo\MobileOperator
and selected String and tapped Read it says Get String: Get String: ROG-CA
then I connected my phone to computer, opened Zune and clicked on update it says your phone is uptodate 7.10 (7720)

yetlivin said:
I did interop unlock, downloaded the samsung registry and under path value I typed in HKLM\System\Platform\DeviceTargetingInfo\MobileOperator
and selected String and tapped Read and changed to ROG-CA
I restarted my phone and again went to samsung registry and under path value I typed in HKLM\System\Platform\DeviceTargetingInfo\MobileOperator
and selected String and tapped Read it says Get String: Get String: ROG-CA
then I connected my phone to computer, opened Zune and clicked on update it says your phone is uptodate 7.10 (7720)
Click to expand...
Click to collapse
Weird, I just did this yesterday and it worked. You might also want to try the disconnect trick (MS might have tweaked the authentication method), but that takes a lot of patience... You on 8107, right?

Related

Get 2.2 GPO on Branded Phones using Kies 1.5.3.10093.82

For Branded network phones, if you still have the previous version of Kies, you can change the LocalVer of Kies in the registry to make it think it's the latest version. Then change the product code etc to make it think you have a unbranded phone and the update will appear
I have done this on UK O2 branded SGS and has now been updated to JPO 2.2
[HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\4]
"SoftwareRevision"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3"
"ProductCode"="GT-I9000HKDXEU"
"HIDSWVER"=""
"DEVCONINFO"=""
[HKEY_CURRENT_USER\Software\Samsung\Kies\]
"LocalVer"="1.5.3.10103.100"
psp888 said:
For Branded network phones, if you still have the previous version of Kies, you can change the LocalVer of Kies in the registry to make it think it's the latest version. Then change the product code etc to make it think you have a unbranded phone and the update will appear
[HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\4]
"SoftwareRevision"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3"
"ProductCode"="GT-I9000HKDXEU"
"HIDSWVER"=""
"DEVCONINFO"=""
[HKEY_CURRENT_USER\Software\Samsung\Kies\]
"LocalVer"="1.5.3.10103.100"
Click to expand...
Click to collapse
Have you tried this yourself or are you merely reposting the hack?
I've tried it on an Orange product code handset with the old version of Kies and it didn't work. Presumably, you need the new version of Kies in order to upgrade to Froyo: i heard somewhere that newer versions of Kies cannot be hacked.
I can confirm that if you allow Kies to auto update the official Froyo release is not available to you if you have upgraded to the Nortic JP6 via the registry hack.
H!pefully someone will find a way around this soon.
jian said:
Have you tried this yourself or are you merely reposting the hack?
I've tried it on an Orange product code handset with the old version of Kies and it didn't work. Presumably, you need the new version of Kies in order to upgrade to Froyo: i heard somewhere that newer versions of Kies cannot be hacked.
Click to expand...
Click to collapse
Yes I have tried this on a O2 UK phone and the update appears.
I've tried this and it refuses to flash with an message telling me that my device hasn't sufficient charge. However, it is 100% charged! Anyone else seen this?
You can't use the reg hack with the latest KIES. You need the previous one, and then, changing the local ver in the registry to the latest version
Once done that, you can upgrade/downgrade to any firmware version inputing the right values on the registry's "software revision", etc...
I tried it myself, and it works.
everyone is going nuts!!!
Im like walking around the house with my USB Cable...
maesebit said:
You can't use the reg hack with the latest KIES. You need the previous one, and then, changing the local ver in the registry to the latest version
Once done that, you can upgrade/downgrade to any firmware version inputing the right values on the registry's "software revision", etc...
I tried it myself, and it works.
Click to expand...
Click to collapse
what branded phone did you have, can you confirm you updated to 2.2 sucessfully so we can keep a record of what branded phones worked with this method
psp888 said:
what branded phone did you have, can you confirm you updated to 2.2 sucessfully so we can keep a record of what branded phones worked with this method
Click to expand...
Click to collapse
Mine was XEC (Movistar Spain) But I already flashed to the leaked JPP/JPO
1st when connected to KIES 10093.82 I got the message: "your device can't be upgraded"
Then, changing the "Local Ver" on the registry, I got the message: "You already have the latest firmware"
So now, if I change "Software revision" in the registry to JF3, I get the option to flash this firmware.
However I didn't flash since I already have the leaked JPO/JPP and I don't know wether this oficial upgrade introduces any changes.
But well, doing this, I get the option to flash the upgrade.
Why did Samsung have to screw us over yet again, what was the big problem with the reg hack being used by people to get around their bloody crap software?????????????????????????????????????????????????
Just tried this reg change after downgrading from the new kies to this version and as soon as I use the phone reg changes I get an error no connection to server message from the updater software, if I leave the phone reg alone (with the JPM one) then it says no upgrade is available.
Anyone else with this problem as i'm about to throw my phone out of the window
psp888 said:
Yes I have tried this on a O2 UK phone and the update appears.
Click to expand...
Click to collapse
Thanks. I'll give it another go then. Maybe I mistyped something.
miker33 said:
Why did Samsung have to screw us over yet again, what was the big problem with the reg hack being used by people to get around their bloody crap software?????????????????????????????????????????????????
Just tried this reg change after downgrading from the new kies to this version and as soon as I use the phone reg changes I get an error no connection to server message from the updater software, if I leave the phone reg alone (with the JPM one) then it says no upgrade is available.
Anyone else with this problem as i'm about to throw my phone out of the window
Click to expand...
Click to collapse
Exactly the same for me on JP6
yes. just doen this. worked a treat. thanks
rastas69 said:
yes. just doen this. worked a treat. thanks
Click to expand...
Click to collapse
Can you post which branded phone you updated from. Thanks
Managed to upgrade mine, had to edit the HIDSWVER and DEVCONINFO to include the JF6 strings and XEU part.
miker33 said:
Managed to upgrade mine, had to edit the HIDSWVER and DEVCONINFO to include the JF6 strings and XEU part.
Click to expand...
Click to collapse
Post what you entered pal so I can have a go.
Lynchy30 said:
Post what you entered pal so I can have a go.
Click to expand...
Click to collapse
You can leave them two entries blank
psp888 said:
You can leave them two entries blank
Click to expand...
Click to collapse
It doesnt work for me if you heave them blank. I had to populate them.
I had to use the following to get around the unable to connect to server problem.
[HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\4]
"SoftwareRevision"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3"
"ProductCode"="GT-I9000HKDXEU"
"HIDSWVER"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3"
"DEVCONINFO"="MN(GT-I9000);VER(I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3);HIDVER(I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3);PRD(GT-I9000HKDXEU);SN();IMEI(enter your imei here);PN( );CON(AT,MTP,MTP);LOCK(FALSE);SDP(CACHE)#OK#OK"
[HKEY_CURRENT_USER\Software\Samsung\Kies\]
"LocalVer"="1.5.3.10103.100"
miker33 said:
I had to use the following to get around the unable to connect to server problem.
[HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\4]
"SoftwareRevision"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3"
"ProductCode"="GT-I9000HKDXEU"
"HIDSWVER"="I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3"
"DEVCONINFO"="MN(GT-I9000);VER(I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3);HIDVER(I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3);PRD(GT-I9000HKDXEU);SN();IMEI(enter your imei here);PN( );CON(AT,MTP,MTP);LOCK(FALSE);SDP(CACHE)#OK#OK"
[HKEY_CURRENT_USER\Software\Samsung\Kies\]
"LocalVer"="1.5.3.10103.100"
Click to expand...
Click to collapse
Worked a treat, many thanks

I've got I8700XXKK1 in my phone now!!!

Hi everybody,
I just received an official install from Zune. Now I've got:
PDA: i8700XXKK1
Phone: i8700XXKI1
CSC: i8700XECKK1
In numbers:
OS Version: 7.10.7720.68
PDA Firmware: 2424.11.11.1
PDA hardware revision: 3.15.0.4
Phone Firmware: 2424.11.9.1
Phone hardware version: 0.0.0.800
Bootloader: 5.11.0.3
And... yes. I've got Internet Sharing available.
Now waiting for the last Microsoft update to fix exchange troubles. (7740)
Another thing. My phone is unlocked by official ChevronWP7 Labs and interop-unlocked. All these are kept without troubles after update.
Great news!
Hi, any improvements?
Is your device banded or not?
What is your carrier?
Better yet, if you have unlocked your phone, check the value here:
HKLM\System\Platform\DeviceTargetingInfo\MobileOpe rator="Your carrier name should be here"
ballajalla said:
Great news!
Hi, any improvements?
Is your device banded or not?
What is your carrier?
Better yet, if you have unlocked your phone, check the value here:
HKLM\System\Platform\DeviceTargetingInfo\MobileOpe rator="Your carrier name should be here"
Click to expand...
Click to collapse
Well. My phone is from Movistar Spain carrier and it's factory unlocked & unbranded. The original string in MobileOperator is "FON-ES".
Because as Movistar ever has been the last in all updates, from 7004 version, I had "000-88" at the registry to be able receive all updates until Mango. Today I read that Movistar was deploying Mango update, and only for test I tried putting again the original string at the registry and "voilá", I received an update from Samsung with those results.
The last week with 000-88 I received a little update form Samsung putting my firmware from 2424.11.8.5 to 2424.11.8.9, but nothing more. I didnt receive the second part.
It's soon to say something about improvements. In a couple of days, I'll put comments about this. I hope battery had been improved, because with Mango I had to disable a lot of push notifications to save battery.
Thanks for your reply. Yes please report back with your findings regarding battery usage, and reception/wifi problems if you had that.
YES!!! I can confirm that I'm running on latest OS version 7.10.7740.16
and latest firmware / radio / bootloader 2424.11.11.1 / 2424.11.9.1 / 5.11.0.3
I had stucked to the KI3 SFR-FR fw update (via WP7 cab sender) and I could not update via Zune (or WP7 cab sender) to the latest firmwares (via Regedit of OperatorName, KI4 and so on). Even the OS update to 7740.16 failed via Zune.
So those stuck on SFR-FR, flash 7740.16 cab with WP7 cab sender, change your regisrty HKEY_LOCAL_MACHINE/System/Platform/DeviceTargetingInfo/MobileOperator/ to FON-ES and update via Zune.
PubERB thanks for the heads up for this update. If you want you can try WP7 cab sender and get the newest cab for the os to get the 7740.16 os version.
chemeng said:
YES!!! I can confirm that I'm running on latest OS version 7.10.7740.16
and latest firmware / radio / bootloader 2424.11.11.1 / 2424.11.9.1 / 5.11.0.3
I had stucked to the KI3 SFR-FR fw update (via WP7 cab sender) and I could not update via Zune (or WP7 cab sender) to the latest firmwares (via Regedit of OperatorName, KI4 and so on). Even the OS update to 7740.16 failed via Zune.
So those stuck on SFR-FR, flash 7740.16 cab with WP7 cab sender, change your regisrty HKEY_LOCAL_MACHINE/System/Platform/DeviceTargetingInfo/MobileOperator/ to FON-ES and update via Zune.
PubERB thanks for the heads up for this update. If you want you can try WP7 cab sender and get the newest cab for the os to get the 7740.16 os version.
Click to expand...
Click to collapse
Did this firmware update, fix the stupid color banding?
I haven't experienced the 16bit banding issue since NoDo. After the Mango update, throughout the os, e.g. lock-screen wallpaper, I see no banding except for some 3rd party apps. I'm not quite sure though if it is because I carried the registry fix-hack over Mango, I can't recall if I updated with the hack activated. But I don't have any red screens. If you would tell me where to look for banding, I'll let you know (I'll check the registry as well to see if there are edits)
chemeng said:
I haven't experienced the 16bit banding issue since NoDo. After the Mango update, throughout the os, e.g. lock-screen wallpaper, I see no banding except for some 3rd party apps. I'm not quite sure though if it is because I carried the registry fix-hack over Mango, I can't recall if I updated with the hack activated. But I don't have any red screens. If you would tell me where to look for banding, I'll let you know (I'll check the registry as well to see if there are edits)
Click to expand...
Click to collapse
I've had the banding, even before NoDo. The only place where I don't have any banding is in a zoomed picture...
It is really annoying, you can't really watch videos because it looks disorted.
I have my phone Interpop unlocked, and the editing in registry doesn't work..
I don't really care if I have the banding on the lockscreen, or in Internet Explorer, I just can't bear it in Zune..
chemeng said:
YES!!! I can confirm that I'm running on latest OS version 7.10.7740.16
and latest firmware / radio / bootloader 2424.11.11.1 / 2424.11.9.1 / 5.11.0.3
I had stucked to the KI3 SFR-FR fw update (via WP7 cab sender) and I could not update via Zune (or WP7 cab sender) to the latest firmwares (via Regedit of OperatorName, KI4 and so on). Even the OS update to 7740.16 failed via Zune.
So those stuck on SFR-FR, flash 7740.16 cab with WP7 cab sender, change your regisrty HKEY_LOCAL_MACHINE/System/Platform/DeviceTargetingInfo/MobileOperator/ to FON-ES and update via Zune.
PubERB thanks for the heads up for this update. If you want you can try WP7 cab sender and get the newest cab for the os to get the 7740.16 os version.
Click to expand...
Click to collapse
I did exactly the same changed from 000-88 to FON-ES MobileOperator in Registry and now I have firmware / radio / bootloader 2424.11.11.1 / 2424.11.9.1 / 5.11.0.3 and Internet Sharing
Hmm, I've got 7740 and the updates that give me Internet Sharing but my Firmware and Bootloader version numbers are older than that :-S
Mine is a German T-mobile phone.
ballajalla said:
Thanks for your reply. Yes please report back with your findings regarding battery usage, and reception/wifi problems if you had that.
Click to expand...
Click to collapse
Same troubles with BOTH WIFI AND 3G ON. Even the newest FW 2424.11.11.1 for FON-ES doesn´t help. IE9 uploads (3G OFF) became faster but the problem persists.
I also suspected Interop-Unlock from the wifi malfunction and applied the new Heatcliff77´s Samsung Repair 3G.xap afterwards. That worked for my Omnia 7 and is worth of try.
i try it yesterday...very nice firmware and allshare working with it...but i went back to 2424.11.9.2 because everytime when i turn internet sharing on and then off my data connection not work..what helps is to turn wifi off and again on then it works again....but thats a bad solution 4 me....i think wait 4 sausung is now the best think ...hopfully they update the non branded omnia 7 with new firmware...
I have an unlocked Omnia 7 - btw of German origin - and do not experience any problems after sharing the internet. Phone restores its wifi/3G connection smoothly on 2424.11.11.1 firmware. A forced installation of wifi hotspot was made before upgrading to 24.24.11.1, however.
Ok...how do u enable tethering...with diag mode or with the xap from here?
Sent from my OMNIA7 using Board Express
Well. After several days from my update, I had to say that all my troubles are gone now.
-Better battery life.
-AllShare runs ok now.
-Internet sharing works without troubles.
-Compass very accurate.
-Smoother interface.
Nothing to say about 16bits banding. I can't see it. I know is disabled by default due to battery saving, but 32 bits can be activated by the applications when they need it, for example by picture editors.
I'm not hurry with 7740 update. I can wait for it.
PubERB said:
Well. After several days from my update, I had to say that all my troubles are gone now.
-Better battery life.
-AllShare runs ok now.
-Internet sharing works without troubles.
-Compass very accurate.
-Smoother interface.
Nothing to say about 16bits banding. I can't see it. I know is disabled by default due to battery saving, but 32 bits can be activated by the applications when they need it, for example by picture editors.
I'm not hurry with 7740 update. I can wait for it.
Click to expand...
Click to collapse
I also got this update, after changing in registry. The battery charges faster, alot faster. But nothing else has changed.. the banding is still there, I don't care about other apss, I just need the default apps to work in 32 bit, but well..
StefanBN said:
I also got this update, after changing in registry. The battery charges faster, alot faster. But nothing else has changed.. the banding is still there, I don't care about other apss, I just need the default apps to work in 32 bit, but well..
Click to expand...
Click to collapse
I'm not sure, but I think you can activate 32 bits touching the registry. Maybe not with this update, but you could try.
PubERB said:
I'm not sure, but I think you can activate 32 bits touching the registry. Maybe not with this update, but you could try.
Click to expand...
Click to collapse
Already tried it, but you can't force 32 bit on Mango, only worked on NoDo
tooly26 said:
Ok...how do u enable tethering...with diag mode or with the xap from here?
Sent from my OMNIA7 using Board Express
Click to expand...
Click to collapse
Diag... See the tutorial in the following thread: Mango Internet Sharing/Tethering - Omnia 7/Focus Tutorial Added to OP. The opening post.
chemeng said:
So those stuck on SFR-FR, flash 7740.16 cab with WP7 cab sender, change your regisrty HKEY_LOCAL_MACHINE/System/Platform/DeviceTargetingInfo/MobileOperator/ to FON-ES and update via Zune.
PubERB thanks for the heads up for this update. If you want you can try WP7 cab sender and get the newest cab for the os to get the 7740.16 os version.
Click to expand...
Click to collapse
I'm stuck on SFR-FR and the 77.40.16 cab(http://download.windowsupdate.com/m..._2cb1bfdd82133914239b8ee1a78e61e9000d124a.cab) gives me error 80180048
Any suggestion ?

Internet Sharing - HELP

Hello, I need your help
Indeed, I have a Samsung Omnia 7:
OS Version: 7.10.8107.79
Number firmware version: 2424.11.11.2
Version number of the equipment: 3.15.0.4
Number of software radio: 2424.11.9.1
Hardware version of radio: 0.0.0.800
Version of the bootloader: 5.11.1.8
SOC version: 0.36.2.0
I would like activated over the internet connection sharing.
I counted a developer and my phone is in interop-unlock.
So I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1334248
I have read the 8107 version but I'm stuck at step 4:
"4.) After the app starts Diagnosis type * # 9908 # and select 'System Tweaks' press 'Save' then 'Close' and RESTART your phone"
Indeed, I do not see "System Tweaks" in the list.
Can you help me?
Thank you in advance and good day
Please Read Thread:
[XAP] Internet Sharing + Interop Unlock all-in-one for Samsung Phones
IMPORTANT: If you updated to 8107 via Zune you may have also updated your phones firmware. If this is the case you will not be able to use this hack. I would suggest rolling back to 7720/7740 and updating via CAB Sender using the cabs in Heathcliff74's thread.
Hello and thank you for your response.
Actually, I've updated the firmware on my phone after updating 8107.
I'm willing to do a flashback, but is it going to delete my data? (SMS, backup games, setting ...)
Thanking you in advance.
Good day
Osso17 said:
Please Read Thread:
[XAP] Internet Sharing + Interop Unlock all-in-one for Samsung Phones
IMPORTANT: If you updated to 8107 via Zune you may have also updated your phones firmware. If this is the case you will not be able to use this hack. I would suggest rolling back to 7720/7740 and updating via CAB Sender using the cabs in Heathcliff74's thread.
Click to expand...
Click to collapse
How do you transfer cabs ? What mode should your phone be in please ?
teddybox said:
Hello and thank you for your response.
Actually, I've updated the firmware on my phone after updating 8107.
I'm willing to do a flashback, but is it going to delete my data? (SMS, backup games, setting ...)
Thanking you in advance.
Good day
Click to expand...
Click to collapse
It will be much easier for you if you flash a custom rom with internet sharing and a lot of other improvements. Here is the link of the best for omnia 7:
http://forum.xda-developers.com/showthread.php?t=1533229
teddybox said:
Hello and thank you for your response.
Actually, I've updated the firmware on my phone after updating 8107.
I'm willing to do a flashback, but is it going to delete my data? (SMS, backup games, setting ...)
Thanking you in advance.
Good day
Click to expand...
Click to collapse
Yes.....If you restore with back-up your Omnia 7 returning as before upgrading to 8107 (same SMS.....same app.....same setting etc.)
---------- Post added at 11:08 PM ---------- Previous post was at 11:00 PM ----------
Forzahibs said:
How do you transfer cabs ? What mode should your phone be in please ?
Click to expand...
Click to collapse
Please read this post:
[CAB] Official WP7 Updates List: 7.10.8107 + ALL LANGUAGES complete + OEM updates
Already, hello and thank you for your reply (and sorry for the delay in my response).
luckyyyyyy6 said:
It will be much easier for you if you flash a custom rom with internet sharing and a lot of other improvements. Here is the link of the best for omnia 7:
http://forum.xda-developers.com/showthread.php?t=1533229
Click to expand...
Click to collapse
A custom ROM not tempt me too ... is it as stable?
How this will happen during heavy system updates?
And catches of the custom ROM makes me not want too:-S
Osso17 said:
Yes.....If you restore with back-up your Omnia 7 returning as before upgrading to 8107 (same SMS.....same app.....same setting etc.)
Click to expand...
Click to collapse
No, no, I wanted to know if I go back in the version of my phone by the method files. CAB ... do I lose my settings, SMS and so on up dating now?
Basically, I want nothing to lose ... not recover the contained since my last backup.
Thank you very much and good day to you

[Q] Keeping Interop Unlock with last update (post-KK2)

Hello,
After reading a lot of posts, I still can't figure out if the Interop Unlock is kept while updating to the latest updates. I tried to downgrade to an "unlockable" version, unlocked, made the unlock "permanent" (via Registry edit) then update, but this didn't work.
I used the WindowBreak unlock, achieve to use it with older version, but when I updated, it wasn't unlocked anymore.
Did I do something bad ? Or did I misunderstand everything ?
Thank you.
Interop Unlock with WindowBreak stay after the official update KK2 via Zune but if you do a Hard Reset you can't unlock more
Downgrade to 7740 with Back Up..... Unlock using WindowBreak and then Update manually version OS 8107 with CAB
You must also update all languages ​​pack on your Omnia 7
EDIT:This is in Official Post for Update Manually OS 8107 with CAB By Heathcliff74
"WARNING!! The new Samsung Onmia 7 KK2 update will prevent the use of Interop Unlock and WindowBreak! This Samsung Firmware update is accompanied with the 7.10.8107.79 if you update with Zune. Other Samsung devices are probably affected too, but I don't know if the update code for those device is KK2 too. If you are already unlocked, this update will not relock your device. If you want to keep the possibility of Interop Unlock open, then use the method described in this thread to update to 7.10.8107.79 without updating to Samsung KK2!"
no solution yet?
I just want to be sure that I'm not missing something... At this point in time there is no way around the fact that windowbreak does not work with the latest samsung update?
Roll back is the only option?
Blanketnam said:
I just want to be sure that I'm not missing something... At this point in time there is no way around the fact that windowbreak does not work with the latest samsung update?
Roll back is the only option?
Click to expand...
Click to collapse
If you have received Samsung Update KK2 don't unlock Omnia 7 with WindowBreak
If you unlock before Update KK2 unlock stay
If you do a Hard Reset after Update KK2 can't unlock with WindowBreak
Roll back at the moment is the only option
Osso17 said:
If you have received Samsung Update KK2 don't unlock Omnia 7 with WindowBreak
If you unlock before Update KK2 unlock stay
If you do a Hard Reset after Update KK2 can't unlock with WindowBreak
Roll back at the moment is the only option
Click to expand...
Click to collapse
Do you know if anyone is working on creating a new interop unlock? Otherwise I have to restore my phone to 22 Jan... thats a long time and many new apps ago...
Blanketnam said:
Do you know if anyone is working on creating a new interop unlock? Otherwise I have to restore my phone to 22 Jan... thats a long time and many new apps ago...
Click to expand...
Click to collapse
I don't know if anyone is working on creating a new Interop Unlock
Ok I rolled back. Realised that update doesnt do much important anyway.
Some of the homebew/bazaar apps still tell me my phone isnt fully unlocked though, like opera mobile.
What's the difference between interop and fully unlocked?
Sorry for stealing attention, but can anyone provide a link with instructions to how to roll back, or downgrade, manually, via magldr or somethink like that? Basically, that should be the same as putting a custom rom, right?
Also, all the links posted for previous firmwares are dead, is there a source where i could download a mint official 7740 or previous firmware? My Omnia has been bought in croatia. Should i only use the ROM for a specific region, or will any european rom do? I use my phone in english.
I can't do the zune roll back since i have to hard reset and change my liveID..
EDIT:
Is tis it? Is this how i flash an older firmware? If so, now I only need the ROM files..
d.a.v.o.r said:
Sorry for stealing attention, but can anyone provide a link with instructions to how to roll back, or downgrade, manually, via magldr or somethink like that? Basically, that should be the same as putting a custom rom, right?
Also, all the links posted for previous firmwares are dead, is there a source where i could download a mint official 7740 or previous firmware? My Omnia has been bought in croatia. Should i only use the ROM for a specific region, or will any european rom do? I use my phone in english.
I can't do the zune roll back since i have to hard reset and change my liveID..
EDIT:
Is tis it? Is this how i flash an older firmware? If so, now I only need the ROM files..
Click to expand...
Click to collapse
All I did was restore my phone using zune... under options, phone, update, then select restore.
Blanketnam said:
All I did was restore my phone using zune... under options, phone, update, then select restore.
Click to expand...
Click to collapse
So i do a restore via zune, and than hard reset and change liveID? That would work you think?
The reason I'm doing this is because croatia has been given access to marketplace and i need to change liveID, put the croatian one as the main one.
d.a.v.o.r said:
So i do a restore via zune, and than hard reset and change liveID? That would work you think?
The reason I'm doing this is because croatia has been given access to marketplace and i need to change liveID, put the croatian one as the main one.
Click to expand...
Click to collapse
Yeah I suppose. If you change to a live a ID with croatia set as the location it should change your store to the croatian one.
d.a.v.o.r said:
Sorry for stealing attention, but can anyone provide a link with instructions to how to roll back, or downgrade, manually, via magldr or somethink like that? Basically, that should be the same as putting a custom rom, right?
Also, all the links posted for previous firmwares are dead, is there a source where i could download a mint official 7740 or previous firmware? My Omnia has been bought in croatia. Should i only use the ROM for a specific region, or will any european rom do? I use my phone in english.
I can't do the zune roll back since i have to hard reset and change my liveID..
EDIT:
Is tis it? Is this how i flash an older firmware? If so, now I only need the ROM files..
Click to expand...
Click to collapse
Which ROM do you need?
Look here: Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO) and see if you find your
Osso17 said:
Which ROM do you need?
Look here: Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO) and see if you find your
Click to expand...
Click to collapse
that's the thing, I don't know which one do i need!
the phone has been bought in t-mobile, sim locked. I sim unlocked it, and need it sim unlocked.
Samsung-Omnia-7-Firmware-XXJJ6 is meant for the t-mobile croatia, but will that relock SIM?
Also, those links are all dead.
Blanketnam said:
Yeah I suppose. If you change to a live a ID with croatia set as the location it should change your store to the croatian one.
Click to expand...
Click to collapse
I know that.. Thanks anyway!
d.a.v.o.r said:
that's the thing, I don't know which one do i need!
the phone has been bought in t-mobile, sim locked. I sim unlocked it, and need it sim unlocked.
Samsung-Omnia-7-Firmware-XXJJ6 is meant for the t-mobile croatia, but will that relock SIM?
Also, those links are all dead.
I know that.. Thanks anyway!
Click to expand...
Click to collapse
I have all ROM same here:Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO)
But the problem is:after flash SIM is locked?
Sorry i don't know
Osso17 said:
I have all ROM same here:Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO)
But the problem is:after flash SIM is locked?
Sorry i don't know
Click to expand...
Click to collapse
As I said, those links are dead. they don't work.
EDIT: actually, i found XXJK1_JK2_JK3 ALL PROVIDERS. it's Croatia RETAIL. Got confirmation SIM unlock will remain intact, and no magldr is needed. So that's all i needed to know on this subject.
Thanks for the replies though!

new firmware update

hi all
i get an update to my omnia 7 from samsung i8700xxld1 :laugh:
After Tango? Is your phone branded?
ilboy said:
After Tango? Is your phone branded?
Click to expand...
Click to collapse
OS : 7.10.8773.98
YESTERDAY I UPDATED MY PHONE FROM 8107 TO 8773 FROM HERE :
http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929
Today I got the update through ZUNE :
PDA :i8700XXLD1
PHONE : I8700XXKI1
CSC:I8700NEELD1
Now i add the oem for omnia 7 (i8700NEELD1)
http://download.windowsupdate.com/m..._3d7012e7afacdf6121a8013137aa23c7fd8ecc49.cab
enjoy
You didn't capture the URL so we can all download it too?
Please can I ask a big favor of you?
If you could restore your phone (it will rollback to before the firmware update, but still have 8773) and download Wireshack and monitor you internet connection in promiscuous mode. Enter filter: "http.request" (without the double quotes). Start to update your phone. You'll see all the webrequests it makes. You'll also see the cab file for the firmware update. It will look something like this: http://download.windowsupdate.com/m...1/02/oem_update**********.pks.***********.cab
That's the address we all need to know in order to download the firmware update on our phones (like mine) which aren't receiving a notification on Zune.
EDIT: If you're not willing to do the above then please just tell us about your phone (what country, whether it is branded with a mobile phone company or unbranded, etc).
No updates today here! Does anyone have the option to send voice memos through MMS after Tango update? I can't even export contacts to SIM.
mohageer said:
OS : 7.10.8773.98
YESTERDAY I UPDATED MY PHONE FROM 8107 TO 8773 FROM HERE :
http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929
Today I got the update through ZUNE :
PDA :i8700XXLD1
PHONE : I8700XXKI1
CSC:I8700NEELD1
Now i add the oem for omnia 7 (i8700NEELD1)
http://download.windowsupdate.com/m..._3d7012e7afacdf6121a8013137aa23c7fd8ecc49.cab
enjoy
Click to expand...
Click to collapse
Thanks, now the question is: can we flash this OEM update on unbranded phones?
Thanks very much for posting that.
So its the fabled April 2012 update, in this instance its the unbranded Nordic (localized) retail release. It should work on all unbranded handsets. I would expect that it will be coming to all retail phones fairly shortly?
So I guess we should recieve it via Zune after all... sooner or later!
Hi
I've done the update using this http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929, everything went fine but now I have a lot issues, like unable to access SMS, contacts, wifi, updates setting, internet... = Nothing is working anymore ;__;
Any idea on how to fix this ?
ScHaPaH said:
Hi
I've done the update using this "http://forum.xda-developers.com/show...&postcount=929", everything went fine but now I have a lot issues, like unable to access SMS, contacts, wifi, updates setting, internet... = Nothing is working anymore ;__;
Any idea on how to fix this ?
Click to expand...
Click to collapse
Restore in Zune. Note of caution for anyone else looking to use this update..
I've tried but I can't find the restore button..
Any way to get unlock working again with this update?
ScHaPaH said:
I've tried but I can't find the restore button..
Click to expand...
Click to collapse
Did you press B (backup then send) or S when you used the cab sender tool?
I've done : S ·(S)end Cabs to device
I've tried to do the language pack update but it didn't work.
ScHaPaH said:
I've done : S ·(S)end Cabs to device
I've tried to do the language pack update but it doesn't work.
Click to expand...
Click to collapse
Why didn't you do a backup?
Run the cab sender tool and press R.
sab742 said:
Why didn't you do a backup?
Run the cab sender tool and press R.
Click to expand...
Click to collapse
"No restore point found" I really don't know why I haven't done a backup point before trying anything, I thought everything would work fine...
Now, when I try to update the phone through Zune it says my phone is up to date instead of the previous error. Do you think I could try to force the update with the airplane mode + "cutting network connection" trick ?
Btw, how can I restore my phone with Zune ? Settings->Update->Restore ?
Wich is the number of the Firmware after this update?
Osso17 said:
Wich is the number of the Firmware after this update?
Click to expand...
Click to collapse
I used this cab after updating to 8773.
Now FW is 242412.4.1
Bootloader: 6.4.0.9
Radio is unchanged.
thx for posting the Cab!
Thenodo said:
I used this cab after updating to 8773.
Now FW is 242412.4.1
Bootloader: 6.4.0.9
Radio is unchanged.
thx for posting the Cab!
Click to expand...
Click to collapse
**** "Sorry, you are limited to 8 thanks per day"
Thanks for info :good:
EDIT:Now i pressed thanks button
Okay guys, I've tried everything back and it's working now. I've the new Internet Sharing option and stuffs.
Thanks for your help.

Categories

Resources