hello guys i'm from slovenia so and i don't know very well english to apologise
i have a big problem with my huawei i installed the cwm and wiped then i try installed cyanogenmod 9 but there was a problem installation was not successfully i was very confused so i downloaded the original 2.3 firmware from huawei.com and i paste orginal boot.img and recovery.img in pink screen then i try to instaled it but i've have pitcs but why i followed the instructions ( i formated the sc card and paste the rom in it) and then is a warnig whin an triangle update failed
so can anybody help me and tell me what can i do to fix this
Thank you !!!
wowww,wait a little.where did you find a cyanogenmod 9 rom? was it from another phone? if yes,maybe that's why the installation failed.
also,everything else you did was kinda wrong
i bet you can only try installing the official 2.3.5 firmware following the instructions included in huawei package and after that if the phone boots up correctly there are a lot of users here(including me) willing to help you
it was for this phone for the pro version and everything so what are is you'r proposal to do here ? can you give me please an custom (clockword and root images that you use and a rom that actually works i've have the pro version
Thanks !!!
I have the pro version too. I think I can help you.
Well the cwm I use is this one: http://sourceforge.net/projects/genoandroid/files/recovery5.0.2.7_en_u8800pro.img/download
Geno made it so big thanks to him
As for working Custom Roms check the U8800 Pro Android Development Section,try any ROM you want and just stick with the one that suits you better Be sure to try out aurora(from sakura), kalo rom, gkalenis rom(it has tv-out) and if you can my roms
Anyway.Try using the custom recovery.img I gave you with the boot.img from the rom you flashed(if the phone boots you are good to go). If the phone doesn't boot reinstall official firmware
so if i understand you for example i just downloaded you first rom and recovery that you gave me now i replace the recovery and that boot.img that is in MoihackB572GBFinal.zip ?
almost.replace with the boot.img from the cm9 rom you flashed previously(it's inside the zip file)
sorry i didn't make this clear
make sure the phone boots after replacing those files in pink screen. if it boots correctly everything else is pretty easy. the important thing here is to get your phone work again
Moihack you'r a genius it actually works and i lied it wasn't cm9 it was cm7 from geno ''cm-7.2.0-u8800pro-Geno-120604-final'' it's chinese-english but it works. so i have a question now which rom do you advise me and thanks a lot !!!
well glad i was able to help! you are welcome
my 2nd rom is based on the cm7 you tried but is free from all apps(only basic ones left) and is actually a pretty small one(about 60mb).you can try it if u want to
now the roms i like is the aurora ics from sakura(it is pretty stable and fast for ics) and horse absolute (made by gkalenis). horse rom also has tv-out option but you have to downgrade to 2.2,re-root,install cwm and flash it in order to work properly(otherwise camera use will cause reboot of the phone).
anyway.if you like ics,feel free to try aurora (don't try the official ics from huawei yet)
if you want froyo and tv-out go with horse rom
if you like gingerbread,well try my roms
btw i am cooking another 2 roms these days(a mokeeOS and a miui 2.3.30 ) so keep an eye on u8800 pro development section if you want
Related
Hello everybody,
I'm trying to install a custom rom on a phone of a friend, an xperia x10i
I tried several rom, but the only one the seems to work is the MIUI rom, that unfortunately does not have any support for the camera...
I tried all the roms I found here, but except for the MIUI rom, all the other get stuck at the beginning, when the logo "sony ericcson appears.
Does anyone have any idea or suggestion?
Thank you very much
depends what your baseband is
do you follow the instructions?some need wiping before boot
try new miui.it has full working cam and extra swap ram.i just dont want my Android to look like
icrap.try this link
http://www.xperiax10.net/2011/08/12/tripnmiui-now-officially-on-the-miuiandroid-forums/
I want to port it on Lg optimus one, but i am not expert
josephnero said:
do you follow the instructions?some need wiping before boot
try new miui.it has full working cam and extra swap ram.i just dont want my Android to look like
icrap.try this link
http://www.xperiax10.net/2011/08/12/tripnmiui-now-officially-on-the-miuiandroid-forums/
Click to expand...
Click to collapse
that isn't what he's asking...
he's asking why only the miui rom will work.
I assume it is because he is trying gb roms with the wrong baseband and kernel
flash 2.3.3 stock rom via flashtool
then root it
then install xrecovery..
then any rom u like download and flash via
xrecovery.....
flash tool :- http://forum.xda-developers.com/showthread.php?t=920746
(PLZ DOWNLOAD THE LATEST FlashTool version 0.3.0.0)
Rooting and Installing Xrecovery :-
http://forum.xda-developers.com/showthread.php?t=1196808
(thanx to DooMLoRD)
some roms 2.3.3
http://forum.xda-developers.com/showthread.php?t=1192988
(WB-XPERIA TW Gingerbread)
http://forum.xda-developers.com/showthread.php?t=1222919
( FreeXperia Achotjan ARC_2.3.5)
http://forum.xda-developers.com/showthread.php?t=1213843
( CM7-ZMOD| 003 | Cyanogenmod 7 | 2.3.3)
Thank you very much for the help...
I'm running the last MIUI rom, but the camera is still not working :/
When I try to take a picture just crash it....
How do I know which baseband I'm using and which kernel I need?
Thank you in advance
The last Trip's Rom with .71 baseband is fully working (camera too)
http://android.modaco.com/topic/344807-rom-18-08-tripnmiui-iris-103235ub71/
Unfortunatelly I don't have permissions to reply in this topic, so I created this one.
I have Installed CM7.2 (from Quarx) on stable recovery and ICS to latest recovery. I use multiboot for this.
Everything worked good, but one of the newest version of ICS has newer kernel, so after I choose it phone just stucks at Moto logo...
So I have 2 questions:
1) Is it possible to get working new ICS on multiboot?
2) If no, how can I delete ICS from latest recovery and install there other firmware?
Thanks
AstorDev said:
Unfortunatelly I don't have permissions to reply in this topic, so I created this one.
I have Installed CM7.2 (from Quarx) on stable recovery and ICS to latest recovery. I use multiboot for this.
Everything worked good, but one of the newest version of ICS has newer kernel, so after I choose it phone just stucks at Moto logo...
So I have 2 questions:
1) Is it possible to get working new ICS on multiboot?
2) If no, how can I delete ICS from latest recovery and install there other firmware?
Thanks
Click to expand...
Click to collapse
Nope its not possible to have the newer versions including 111207 on multiboot!
to get rid of ICS in the latest boot you can just flash an other .zip over it, like miui or stuff...
hope it helped, greetz Esok
It is possible
Yes, it is possible. The only vital pre-requisite is to upgrade the main CM7 system to 2.3.4 kernel version.
But before, take care of:
1. The 2.3.4 kernel has some issue regarding camera, specially green lens (I think it doesn't work yet). Red lens work great, after a few work around with some overlay libs. (all this stuff very well described on CM7 thread).
2. Once you upgrade the kernel, you could install CM9 latest test builds.
pros:
- both systems running latest GB kernel (remember be sure to use 2.3.4)
- great to have CM7 and CM9.
cons:
- be sure to fix your camera in CM7. (of course, hope you have red lens )
- in my case: CM9 boot, but it doesn't detect the baseband (if I check "About phone" Baseband details show "Unknown"). WiFi work Ok.
I really appreciate any advice in this last comment.
Happy holidays
Hi
im new to android ..
i own a ideos u8150.........and i have rooted it with z4 root
I also have managed to install clock world mod 3.0.2.4 i flashed it through pc (works perfectly)
now i want to change my stock rom ..i' heard ideos HD and droniX are good roms
i'd like to install droniX 0.6 raw ginger ..
but can anyone help me in flashing the rom i need a guide..
also how can i make full backups so i can revert to my stock rom anytime i want..
Does switching to custom roms affect baseband of my mobile ..
because of a picture i saw in a blog that says "baseband version :unknown" in mobile settings .
i have been a apple user and to jailbreak you need to preserve your basebands so is there anything like that in android
i have also read that after flashing dorinX .6 many see a black screen ..how can i prevent that..
i've also installed rom mangaer free version from market but its useless because everytime press any option it tells me to install colckworld mod and when i press install a list of phones comes up but u8150 is not in the list only 7 options.......
Thankyou
You won't get much love here as this is in the wrong forum, but here is a link to my rom:
http://forum.xda-developers.com/showthread.php?t=1375289
You dont need to use my rom, it just has flashing instructions in the first post.
*Good luck with ginger, it is still not stable, so maybe stick with 0.5.4.
*Baseband is not changed by flashing roms in CWM, only by official huawei update software, find a copy of yours before flashing if you can.
*CWM has the option to make a NAND backup under backup and restore.
*Dronix is good, Leandroidmod is ok, Ideos HD seems to be deprecated as I had bugs which I reported and have not been fixed so I switched roms. Has not had an update in months.
Here is the wiki page for u8150, have fun:
http://forum.xda-developers.com/wik...ei_U8150_IDEOS#Actively_Developed_Custom_ROMs
Hey
I just got a brand new Defy and I'm hoping I can get ICS on it. However, in my country there's no T-Mobile, Verizon, Orange or whatever, I bought it in an electronics store, so I have absolutely no idea about what CG version it is. I've already read the beginner's guide from top to bottom, but I still have some doubts:
1. How do I know which CG version do I have? (I need to know so I can know how to get back to stock in case of warranty)
Nevermind, I found the answer >_> CG 4 SBF 3.4.2 (Froyo)
2. I've seen lots of ROMs for this device, but their instructions aren't very clear and I don't want to brick my device (which, from what I've read it is very hard to do) or get stuck in a higher CG version.
3. The beginner's guide is cool, but I haven't seen any tutorials on installing a specific rom (in my case ICS) so, I'd appreciate some pointers here, if possible
Thanks in advance! =)
- DARKGuy
I have a defy+, so i have 2.3.6 on it. But you don't need to flash any new firmware to get ICS or MIUI, since they both have froyo builds. CG version only changes when you flash full SBF, not when installing zips and custom ROMs. So you shouldn't worry about getting stuck on a higher CG.
So what you need of course is a rooted phone , the SndInitDefy_2.0.apk (to install custom recovery and bootmenu because of locked bootloader), install the latest bootmenu (don't mind installing the old one although it might work on froyo). And there you're ready to flash! (to enter custom recovery on your defy, reboot your phone and press the volume down key when you see the blue led) I assume you know how to use the custom recovery, so I won't go into detail on that.
Since I haven't flashed any froyo ICS builds before, I don't dare to tell you how to myself! So just head over to the main CM9 ICS thread You'll find a guide in the first post. Nevermind, i'll just quote it here:
nogoodusername said:
How to flash ICS (Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install Zip from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash CM7 Kernel
7:Clear Cache and Dalvik Cache
First Boot will take some time...
Click to expand...
Click to collapse
You need to flash Google Apps seperately through recovery. You should find the files and links needed in the thread linked above. Know the difference between the Defy+ builds (with gingerbread [gb] kernel), and the Defy builds with froyo kernel.
Please note that ICS for defy is still in it's early stages and you might experience bugs. But most people still think it's worth it! xD Sorry if I made it too detailed for you, but then others can make use of it too! Oh, I hope I haven't said wrong that will soft brick your phone! Flashing the wrong kernel always gives me bootloader error! Anyway bricking really isn't that scary (only the first time i can confirm) It's good to have an SBF with RSDLite and Drivers installed on your PC just in case
Oh! And then If you want MIUI, just do the normal wipes and flash the ROM. Let me recommend MIUI Pikachu edition by TweetyPeety, the best MIUI ROM out there! It even has the touch based AROMA installer in recovery where you can customize the installation!
I was wandering if there is any advantage in flashing a newer kernel (either CM9 kernel or a GB full SBF) on defy if I'm using CM7/CM9/MIUI
Also, I tried CM9 without flashing the kernel, and it works, so I can't figure what difference would that step make. How does changing the default kernel affect the use of custom roms? Any hit in performance/usability? Would I have to use Defy+ roms if I flash CM9 kernel?
Persechini said:
I was wandering if there is any advantage in flashing a newer kernel (either CM9 kernel or a GB full SBF) on defy if I'm using CM7/CM9/MIUI
Also, I tried CM9 without flashing the kernel, and it works, so I can't figure what difference would that step make. How does changing the default kernel affect the use of custom roms? Any hit in performance/usability? Would I have to use Defy+ roms if I flash CM9 kernel?
Click to expand...
Click to collapse
I think you shouldn't flash new kernel for CM9 since it is in alpha
it is better to keep on CM7.1 and wait until a stable version from CM9 (unless you are a real HW or SW developer)
HI ... i did a terrible mistake on my defy ..... It was having some stability issues on cyanogenmod 9 and so I thought lets flash the stick froyo on it and redo everything .... but due to my carelessness by mistake i had flashed defy plus sbf on it .... the build is 4.5.1-134_DFP-1321 with android version 2.3.6 .. now I am having many problems like camera is not working, touch screen sensitivity is not good ...
things I tried ....
I refered to all in one defy beginners guide .... that has two methods to fix this kind of problem .. but both were not useful .the phone does not boot after flashing the provided sbf file .
I am able to install recovery on it and restore to nandroid back up but i think due to kernels mismatch the issues remain same ...
When from recovery i tried to install CM 7 and did flash its kernel too .... the phone will not boot ...
Please help I am not in a budget to buy a new phone and I love my defy very much ... Any help and guidance is truly appreciated.....Thanks
i had a problem not exactly like this, but had solved in this thread
http://forum.xda-developers.com/showthread.php?t=1432100
it's a cm9 rom and is very smooth and stable.
since then it's working fine.
hey ... i tried this .. but still i am having camera and touchscreen problems .... IS there any sbf for defy with 2.3.6 version as only this can my current version on defy ...
thanks
gaushim said:
HI ... i did a terrible mistake on my defy ..... It was having some stability issues on cyanogenmod 9 and so I thought lets flash the stick froyo on it and redo everything .... but due to my carelessness by mistake i had flashed defy plus sbf on it .... the build is 4.5.1-134_DFP-1321 with android version 2.3.6 .. now I am having many problems like camera is not working, touch screen sensitivity is not good ...
things I tried ....
I refered to all in one defy beginners guide .... that has two methods to fix this kind of problem .. but both were not useful .the phone does not boot after flashing the provided sbf file .
I am able to install recovery on it and restore to nandroid back up but i think due to kernels mismatch the issues remain same ...
When from recovery i tried to install CM 7 and did flash its kernel too .... the phone will not boot ...
Please help I am not in a budget to buy a new phone and I love my defy very much ... Any help and guidance is truly appreciated.....Thanks
Click to expand...
Click to collapse
You are on Bootloader version 6 now. You can only be saved by flashing a bl6 rom for the "defy" not defy+. Or any other rom for Defy which has bootloader version 6.
if you are able to enable android debugging and root + install 2ndinit (considering your touch screen works a little bit to your command ) you can directly flash CM9 rom.
Root first, 2ndinit, then install CWM and flash froyo kernal after flashing the CM9 or CMX zip. (According to my little knowledge, Epsylon's build comes with froyo kernel already)
Considering your touchscreen is totally abrupt and non-responsive and you are unable to root using it. You can flash bl6 froyo rom for your green lense defy.
Follow this thread for downgrading the build version + kernel. http://forum.xda-developers.com/showthread.php?t=1486731
DO NOT USE THE FROYO ROM IN THE THREAD AS REGULAR. (DON'T USE THE CAMERA WHEN USING THE ROM IN THE THREAD OR YOU MIGHT GET YOUR CAMERA LED PERMANENTLY BURNT). JUST USE IT TO ROOT + 2NDINIT + CM9
gaushim said:
hey ... i tried this .. but still i am having camera and touchscreen problems .... IS there any sbf for defy with 2.3.6 version as only this can my current version on defy ...
thanks
Click to expand...
Click to collapse
Its not the android version. Its Bootloader version that prevents you from downgrading.