Unfortunatelly I don't have permissions to reply in this topic, so I created this one.
I have Installed CM7.2 (from Quarx) on stable recovery and ICS to latest recovery. I use multiboot for this.
Everything worked good, but one of the newest version of ICS has newer kernel, so after I choose it phone just stucks at Moto logo...
So I have 2 questions:
1) Is it possible to get working new ICS on multiboot?
2) If no, how can I delete ICS from latest recovery and install there other firmware?
Thanks
AstorDev said:
Unfortunatelly I don't have permissions to reply in this topic, so I created this one.
I have Installed CM7.2 (from Quarx) on stable recovery and ICS to latest recovery. I use multiboot for this.
Everything worked good, but one of the newest version of ICS has newer kernel, so after I choose it phone just stucks at Moto logo...
So I have 2 questions:
1) Is it possible to get working new ICS on multiboot?
2) If no, how can I delete ICS from latest recovery and install there other firmware?
Thanks
Click to expand...
Click to collapse
Nope its not possible to have the newer versions including 111207 on multiboot!
to get rid of ICS in the latest boot you can just flash an other .zip over it, like miui or stuff...
hope it helped, greetz Esok
It is possible
Yes, it is possible. The only vital pre-requisite is to upgrade the main CM7 system to 2.3.4 kernel version.
But before, take care of:
1. The 2.3.4 kernel has some issue regarding camera, specially green lens (I think it doesn't work yet). Red lens work great, after a few work around with some overlay libs. (all this stuff very well described on CM7 thread).
2. Once you upgrade the kernel, you could install CM9 latest test builds.
pros:
- both systems running latest GB kernel (remember be sure to use 2.3.4)
- great to have CM7 and CM9.
cons:
- be sure to fix your camera in CM7. (of course, hope you have red lens )
- in my case: CM9 boot, but it doesn't detect the baseband (if I check "About phone" Baseband details show "Unknown"). WiFi work Ok.
I really appreciate any advice in this last comment.
Happy holidays
Related
hi all,
if i flash the 2.3.4. can i flash after any firmware coocked? I have already flashed it to 2.3.4 and when i try to fash any room coocked i have the phone in black screen and doesn't start. there is some problems about the update related to bootloder update ?
Long story short: if you flash the official 2.3.4 rom (kernel), you lose the option (at least at the moment) to downgrade it.
Since most of the current roms for the Milestone 2 (MIUI and CM7 - both "vanilla" by tezet and ICS themed by endless7) use the older kernel, you can't use them anymore.
You could try MS2Ginger by walter79, which is based on the 2.3.4 kernel (the Chinese one).
djlooka said:
Long story short: if you flash the official 2.3.4 rom (kernel), you lose the option (at least at the moment) to downgrade it.
Since most of the current roms for the Milestone 2 (MIUI and CM7 - both "vanilla" by tezet and ICS themed by endless7) use the older kernel, you can't use them anymore.
You could try MS2Ginger by walter79, which is based on the 2.3.4 kernel (the Chinese one).
Click to expand...
Click to collapse
I have just tried to flash MS2Ginger but at startup the phone stays with saver screen. Now, the
rsd motorola doesn't recognize the phone.
DO you have any solution?
thanks
I'm sorry, I have no clue...
djlooka said:
I'm sorry, I have no clue...
Click to expand...
Click to collapse
i'm not able to flash correctly the MD2 version.
I ve succesfull installed MS2 Ginger 2.0.
You have to restore nandroid backup but dont flash the fixed .fsb and do a complete wipe with the stock recovery !
That 's work !!!
Hey
I just got a brand new Defy and I'm hoping I can get ICS on it. However, in my country there's no T-Mobile, Verizon, Orange or whatever, I bought it in an electronics store, so I have absolutely no idea about what CG version it is. I've already read the beginner's guide from top to bottom, but I still have some doubts:
1. How do I know which CG version do I have? (I need to know so I can know how to get back to stock in case of warranty)
Nevermind, I found the answer >_> CG 4 SBF 3.4.2 (Froyo)
2. I've seen lots of ROMs for this device, but their instructions aren't very clear and I don't want to brick my device (which, from what I've read it is very hard to do) or get stuck in a higher CG version.
3. The beginner's guide is cool, but I haven't seen any tutorials on installing a specific rom (in my case ICS) so, I'd appreciate some pointers here, if possible
Thanks in advance! =)
- DARKGuy
I have a defy+, so i have 2.3.6 on it. But you don't need to flash any new firmware to get ICS or MIUI, since they both have froyo builds. CG version only changes when you flash full SBF, not when installing zips and custom ROMs. So you shouldn't worry about getting stuck on a higher CG.
So what you need of course is a rooted phone , the SndInitDefy_2.0.apk (to install custom recovery and bootmenu because of locked bootloader), install the latest bootmenu (don't mind installing the old one although it might work on froyo). And there you're ready to flash! (to enter custom recovery on your defy, reboot your phone and press the volume down key when you see the blue led) I assume you know how to use the custom recovery, so I won't go into detail on that.
Since I haven't flashed any froyo ICS builds before, I don't dare to tell you how to myself! So just head over to the main CM9 ICS thread You'll find a guide in the first post. Nevermind, i'll just quote it here:
nogoodusername said:
How to flash ICS (Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install Zip from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash CM7 Kernel
7:Clear Cache and Dalvik Cache
First Boot will take some time...
Click to expand...
Click to collapse
You need to flash Google Apps seperately through recovery. You should find the files and links needed in the thread linked above. Know the difference between the Defy+ builds (with gingerbread [gb] kernel), and the Defy builds with froyo kernel.
Please note that ICS for defy is still in it's early stages and you might experience bugs. But most people still think it's worth it! xD Sorry if I made it too detailed for you, but then others can make use of it too! Oh, I hope I haven't said wrong that will soft brick your phone! Flashing the wrong kernel always gives me bootloader error! Anyway bricking really isn't that scary (only the first time i can confirm) It's good to have an SBF with RSDLite and Drivers installed on your PC just in case
Oh! And then If you want MIUI, just do the normal wipes and flash the ROM. Let me recommend MIUI Pikachu edition by TweetyPeety, the best MIUI ROM out there! It even has the touch based AROMA installer in recovery where you can customize the installation!
I was wandering if there is any advantage in flashing a newer kernel (either CM9 kernel or a GB full SBF) on defy if I'm using CM7/CM9/MIUI
Also, I tried CM9 without flashing the kernel, and it works, so I can't figure what difference would that step make. How does changing the default kernel affect the use of custom roms? Any hit in performance/usability? Would I have to use Defy+ roms if I flash CM9 kernel?
Persechini said:
I was wandering if there is any advantage in flashing a newer kernel (either CM9 kernel or a GB full SBF) on defy if I'm using CM7/CM9/MIUI
Also, I tried CM9 without flashing the kernel, and it works, so I can't figure what difference would that step make. How does changing the default kernel affect the use of custom roms? Any hit in performance/usability? Would I have to use Defy+ roms if I flash CM9 kernel?
Click to expand...
Click to collapse
I think you shouldn't flash new kernel for CM9 since it is in alpha
it is better to keep on CM7.1 and wait until a stable version from CM9 (unless you are a real HW or SW developer)
Hi,
I recently bought Defy MB525 mobile and it is under warranty till feb'13.
Below are current specs of my mobile-----
System version: Moto_version.34.3601.7.MB525.Retail.en.SEA15
Firmware version:2.2.2
Kernel Version: 2.6.32.9-g0671d13
Build number: JEM3.4.3-36-1.7
Camera Hardware: SOC
--------------------------------------------------
Please share the steps i should follow for 1) backup existing stock version 2.2.2, 2) overclock CPU, 3) upgrade to latest stable ICS version, 4)restore stock version 2.2.2.
Let me know if you need any other details.
Thanks
hi there
well to backup your stock rom first of all you need to root your phone with superoneclick google it.Then install latest 2nd init form here http://forum.xda-developers.com/showthread.php?t=1032212.after that reboot and when your phone blinks blue push vol down button to get into bootmenu.select custom recovery/backup all(to backup you rom)
3)either you download epsy/quarks ics build http://forum.xda-developers.com/showthread.php?t=1432100 or aopk http://forum.xda-developers.com/showthread.php?t=1585425 and the ics gapps.then move those to sd card and enter bootmenu again select wipe data/cache and install zip from sd card:chose one of the 2 above and the gapps after finish reboot and VOILA ics
How is camera in ICSROM?
camera works fine but panorama fc
Thank you, have some questions again
Thank you very much for replying, i am half journey way to start updating to ICS
i have downloaded epsy CM9-NIGHTLY-120406-Defy.zip, is it right one? is there a stable version?
when to overlock the cpu after installing ICS or can be done before?
I'm not sure if there's a stable CM9 release for Defy.
when to overlock the cpu after installing ICS or can be done before?
Click to expand...
Click to collapse
After the update..
I'm using 06.04 by Epsylon3 with Froyo kernel and green lens: I find it stable enough, good for day to day usage. There's no CM9 stable version, not even a RC one.
You can overclock the CPU from the bootmenu, although CM9 comes with 1GHz standard. Maybe undervolt it a bit.
Trimis de pe Defy CM9
Confused on updating android
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.
Rodefy said:
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.
Click to expand...
Click to collapse
We need froyo kernel because we have SOC (green) camera ;-(
So we need to flash CM7 kernel too. If you use CM9 kernel, then your SOC camera will not work
Procedures in this thread in the first post
I also had to flash ICS Gapps zip (somehow ommited in the procedure)
You can use mentioned nightly - works fine
I would propose to use titanium backup from the market to backup all your apps with data - then you can simply restore them back with all data inside (but your apps - do not restore system apps)
Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
AFAIK, MIUI requires Froyo kernel and Defy+ has GB kernel.
Evolution-VII said:
Hi everyone,
I was trying to post this in another thread but I'm unable to post in the Development sector.
I have a Motorola Defy+ running the Android 2.3.5, I've tested the following ROM's:
CM9 by quarx
CM9 by Epsylon
Both runs just fine, but I was thinking this weekend to test another rom's to have new experiences and found out about the MIUI, which seens to be a very good rom.
But the fact is that I'm facing some troubles trying to run this rom.
Everytime I try to apply it, the Recovery says to me that the install went ok, but once I reboot the phone, I got stuck in the Motorola Bootloader screen, and I have to flash a stock SBF again.
I've tried the STABLE (GB) and the BETA (ICS), both got the same problem.
Different versions of 2ndinit (1.4, 2.0, 2.3).
Does anyone know why I'm having this problems?
I would appreciate any help.
Best regards,
Click to expand...
Click to collapse
MIUI is a froyo based ROM.
Downgrade to froyo if you need to flash it..
Sent from my Defy+ using Tapatalk 2
Hi All,
I've done literally weeks of research on this, so hopefully I've not missed any easy posts, but I want to check my approach and ask a final question. This is my daily phone, and while I know the risks and issues with custom roms, I want to get it right. Hope someone can advise.
ROM I want to install is Quarx's JB 4.1.2 CM10.
Phone I have is UK Motorola Defy (Red Lens, original):
System version: Blur_Version_2.21.0.MB525.Retail.en.GB
Model Number: MB525
Firmware version: 2.1-update1
Baseband version: EPU93ST2_U_03.02.00
Kernel version: 2.6.29 [email protected] #1
My plan is:
1. Official upgrade to Froyo - it seems this is not yet done on mine, and custom ROMs require its Kernel, I read
2. Root phone - SuperOneClick
3. Titanium Backup - Needs Root
4. ClockWorkMod Recovery - Needs Root, and gives me Nandroid Backup capability in BootLoader
5. Nandroid Backup - this should provide me a route back to stock (* see question below)
6. Flash ROM - this will give me CM10 based on Jelly Bean 4.2.1
Question is, despite reading many threads, I'm still confused on CG versions and SMG file versions (CG##.smg). I do want to be able to flash back to stock after this, in case I want to sell the phone - if I flash up to Quarx's CM10 JB 4.1.2, what CG version is it and is it higher than I can possibly get back to stock from? Or can I find a Fixed SBF of a Stock ROM that will let me go back? How can I best prepare for this?
Anything else to be aware of or concerned about?
Thanks very much.
Steve.
The easiest approach is to directly flash cm10 first and check off it works(you can flash back your stock sbf if there's any problem) because CM10 WILL NOT INCREASE YOUR CG VERSION
The potential problem you can face(which can not stop you from stock sbf flash) is an incompatibility of 2ndboot with your stock kernel.
If you run into that problem (which I think should not occur) you will have to flash a compatible sbf, with higher cg version and a compatible stock kernel.
Sent from my MB526 using xda premium
Thanks - good to know CM10 has no CG version. I expected the developers to want to get rid of that kind of limitation as soon as they could!
Hmmm, so could someone confirm, that Quarx's CM10 will flash directly over the stock 2.1 Eclair ROM as listed above (with root/CWM), and doesn't need Froyo deployed as a base? That would really help if so - then I have no further considerations and I can just get on with it. I'll take it carefully and I'd rather not be faced with non-booting etc the first time round.
I believe wifi tethering doesn't work on it, though, or there's some problem with restarting regarding wifi tether. That's a shame, but maybe an app like Barnacle or OpenGarden can work instead...?
You could try it yourself by taking a Nandroid backup and if you face the non booting problem then flash stock sbf+ restore. Beware that sometimes first boot hangs or bootloops and in such cases you can fix the problem with a battery pull, or data wipe respectively
Open garden works without issues
Hit thanks!