Related
Does anyone know if usb gamepads work with the Iconia? Would like to use an analoge pad if it can be done to play some PSX games..
Thanks, Sonkey
This has been discussed numerous times since 3.1 was released.
Yes, USB gamepads are supported. Not 100% sure about analog thumbpads for psx playing though. Try it
Sent from my A500 using Tapatalk
i use my usb controller to play snes all the time. not sure on psx just should work. no need for an app just connect and map the keys in the emulator. heres a link on the kind of controller im using
http://www.amazon.com/Logitech-Rumb...?s=electronics&ie=UTF8&qid=1314972216&sr=1-24
I have a wired usb xbox 360 controller. This works with the Iconia.
Sweet,
Does the analouge part work as well. If so that is what I will get
kylepotts said:
I have a wired usb xbox 360 controller. This works with the Iconia.
Click to expand...
Click to collapse
yes so does mine
kylepotts said:
I have a wired usb xbox 360 controller. This works with the Iconia.
Click to expand...
Click to collapse
I use a wireless xbox 360 controller for PC (w/ usb receiver). This works well for nesoid hooked up to the tv via HDMI
why bother using a wired joystick when you can get a wireless joystick at just few bucks more..
i have PS3 wireless joystick and installed sixaxis contoller app... been happy and no problem so far
Those of you using an xbox controller hardwired..
my left analogue stick works but not the right one. also the top L+R buttons work but not the bottom ones..
do you guys have the same issues??
Also..
Those using the PS3 controller.. have you noticed that any buttons arent responding? might invest in a PS3 controller if they all work correctly.
thanks in advance.
I've bought this app on the market
(Damn, cannot post links...)
it's called 'USB/BT Joystick Center'
It's working perfectly to me...
I've tested 3 generic usb joysticks and all of them worked.
You can create the USB driver based on the bits input of the device.
really nice, and no root is needed.
rafinhasantana 'USB/BT Joystick Center
Hey rafinhasantana,
I bought USB/BT JOY center too but i was afraid to install it. check out the permissions on that thing. Says it can record passwords you enter in another application. I know its probably needed to record button actions etc... but i was a little concerned.
Do you have any issues with it thus far? Anyone else use this????
sawamura said:
why bother using a wired joystick when you can get a wireless joystick at just few bucks more..
i have PS3 wireless joystick and installed sixaxis contoller app... been happy and no problem so far
Click to expand...
Click to collapse
I've been looking into this. When you say a "wireless PS3 remote", sdo you mean the stock Sony branded remote, or other?
Goldenknight67 said:
Hey rafinhasantana,
I bought USB/BT JOY center too but i was afraid to install it. check out the permissions on that thing. Says it can record passwords you enter in another application. I know its probably needed to record button actions etc... but i was a little concerned.
Do you have any issues with it thus far? Anyone else use this????
Click to expand...
Click to collapse
Hi!
Well i've had no problems with that.. It works like an alternative input method, like in the Wii controller input, but you're not gonna use to type your passwords around. I've contacted the developer about the deadzone for sticks and he hass implemented that...
It's working fine for me, and since I don't use the tablet for banking I'm not THAT worried about passwords on it at all...
fermunky said:
I've been looking into this. When you say a "wireless PS3 remote", sdo you mean the stock Sony branded remote, or other?
Click to expand...
Click to collapse
Yeah I use one and work very good!!
Sent from my A500 using Tapatalk
Excellent, gonna go grab a Sony remote today. Thanks
I just noticed the Six Axis app requires root... shucks.
Those SixAxis Dual Shock controllers... the ones listed as wireless still have the mini USB connection on the back. Is that ONLY for charging, or can those be hooked up via USB to the tablet for use as well?
fermunky said:
I just noticed the Six Axis app requires root... shucks.
Those SixAxis Dual Shock controllers... the ones listed as wireless still have the mini USB connection on the back. Is that ONLY for charging, or can those be hooked up via USB to the tablet for use as well?
Click to expand...
Click to collapse
Thats right i used it that way to play shadowgun
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Im also thinkimg of getting a set or paiir of ps3 controller. Im kinda leaning towards the bluetooth wireless sixaxis. But before i pull the trigger, can anyone plz confirm that you can connect two wiireless sixaxis controllers simultaneously for 2-player mode in some games? If not, can the wired controllers do it? Tia
Anyone know if PlayStation One (dual shock) controllers can work properly?
I have one hooked up via an OTG cable and a USB conversion hub (to plug the controller into) and can only seen to get the analogue sick to work on FPse. The others buttons (other than the D-pad and right analogue stick) seem to be working in the joycentre but I am not sure how to get them to work outside it, out how to tell the joycentre what physical buttons the presses relate to. Does anyone know if a tutorial video in English?
rafinhasantana said:
I've bought this app on the market
(Damn, cannot post links...)
it's called 'USB/BT Joystick Center'
It's working perfectly to me...
I've tested 3 generic usb joysticks and all of them worked.
You can create the USB driver based on the bits input of the device.
really nice, and no root is needed.
Click to expand...
Click to collapse
are you sure it do sent need root because every freaking video I seen said you need it to use that app( can you make a video of how you do it.) if so can you use a controller to show me how to use it on modern combat 4 when you put it on YouTube
so it was my understanding that an innate ability of 3.1 was that it allowed us to plug in controllers, including PS3 and 360, and play witht hem. I plugged in my PS3 controller, expecting some sort of "input detected" message, but nothing. theredoesn't seem to be anything in the settings to configure or connect a device, either.
how do we do this? I know there are some emulators that have released updates with controller compatibility in the changelog.
As far as i kmow you camt connect a 360 controller. To connect a ps3 controller u need sixaxis controller. Its a paid app in the market.
Sent from my A500 using Tapatalk
Falkner09 said:
so it was my understanding that an innate ability of 3.1 was that it allowed us to plug in controllers, including PS3 and 360, and play witht hem. I plugged in my PS3 controller, expecting some sort of "input detected" message, but nothing. theredoesn't seem to be anything in the settings to configure or connect a device, either.
how do we do this? I know there are some emulators that have released updates with controller compatibility in the changelog.
Click to expand...
Click to collapse
I connected my wireless xbox360 controller using the PC dongle. I never got any message, it just worked. There are videos showing how to do it.
I can also confirm if you plug in a usb xbox 360 controller it works almost instantly
Using the xBox wireless usb adapter for PC to play emulators on my a500 3.1. Works like a charm.
The app to support the PS3 Sixaxis controller is only needed if you use it over bluetooth. It works without that program plugged in by USB. Bluetooth support is cool, but you need a PC as part of the pairing process for the controller.
Doing something with the controllers is something different though ... most emulators allow you to map the controller keys to the game, but you need to set them up in the emulator.
Sent from my A500 using Tapatalk
does anyone have any tips on disabling the home and back keys on the android while using a different input method? I connected s wired xbix 360 controller to my tablet and I can bind some buttons for emukators but other buttons on the controller are bound to home and back so when I try and use those bbuttons in the emulator they either close or worse I can't even bind the buttons because I'm pressing back. I also am unable to use the right thumbstick for input. Any suggestions and/or help?
curse4444 said:
does anyone have any tips on disabling the home and back keys on the android while using a different input method? I connected s wired xbix 360 controller to my tablet and I can bind some buttons for emukators but other buttons on the controller are bound to home and back so when I try and use those bbuttons in the emulator they either close or worse I can't even bind the buttons because I'm pressing back. I also am unable to use the right thumbstick for input. Any suggestions and/or help?
Click to expand...
Click to collapse
Use an app called bt/USB joystick controller (just search "joystick" in market.) Its a paid app but about 60p and well worth it. I use it with my wired and wireless Xbox pad.
It has custom profiles for all different pads and means all ure buttons work. The UI isn't massively clear but once its set up its a doddle You basically tell ur device that input method is not touch screen keyboard, but instead your pad.
Best part is that I use my pad for some proper games (ie not emulators) and its great. Gta is awesome on it.
Awesome app but I'm having troubke configuring my analog sticks would you ir anyone happen to have a driver for a wired 360 controller appsrentky you can export profiles.
I was surprised that a ps3 controller when plugged in with the USB and it just worked
Sent from my Nexus S 4G using Tapatalk
curse4444 said:
Awesome app but I'm having troubke configuring my analog sticks would you ir anyone happen to have a driver for a wired 360 controller appsrentky you can export profiles.
Click to expand...
Click to collapse
I just loaded up the standard control profile for wired 360 pad. Analogue sticks work fine though I think it treats them as digital. Did see there was option for some analogue settings within the program
yeawhatever said:
I just loaded up the standard control profile for wired 360 pad. Analogue sticks work fine though I think it treats them as digital. Did see there was option for some analogue settings within the program
Click to expand...
Click to collapse
I think he os asking you to export your setting for the wired 360 to load up on the ps3 controller. If not idblike to see it to try onlive with it
Sent from my Acer Iconia A500 using Tapatalk
Many games, including Grand Theft Auto III have built-in coding for controllers. I plugged my PS3 controller in and it worked perfectly.
sRDennyCrane said:
Many games, including Grand Theft Auto III have built-in coding for controllers. I plugged my PS3 controller in and it worked perfectly.
Click to expand...
Click to collapse
Yeah but onlive does not, I'd love to throw money at them, but i own three wireless controller s and really don't feel like getting another one
Sent from my Nexus S 4G using Tapatalk
Does it matter if you're on a custom ROM or OC'd? I couldn't get my PS3 controller to work on GTA 3 using the Epiphany ROM.
Simplified said:
Does it matter if you're on a custom ROM or OC'd? I couldn't get my PS3 controller to work on GTA 3 using the Epiphany ROM.
Click to expand...
Click to collapse
I might be wrong but the gamepad support comes from the kernel. Maybe inquire with the Dev, just a question are you plugging the ps3 in with USB?
Sent from my Acer Iconia A500 using Tapatalk
Wireless
Has anybody tried connecting a wireless controller? (in a fashion similar to how you'd connect a wireless controller to a PC)
TheScoby said:
Has anybody tried connecting a wireless controller? (in a fashion similar to how you'd connect a wireless controller to a PC)
Click to expand...
Click to collapse
I can hook the wireless dongle for xbox360 controller up and get some functionality with the controller, but the thumbsticks won't work in gta3.
Sent from my A500 using Tapatalk
Good night. I started this post to share with you all hardware usb devices that i have tested and worked without problem into OUYA.
First, i get an usb host with 5 usb ports , because ouya just have one standard usb port,
Usb .host worked without problem, and connected to it:
Keyboard and wireless mouse: i have tried 3 different models of keyboard + mouse wireless combo and all worked very well. Instant response and now i can navigate trought ouya like in Pc hihi
Usb memory sticks: I tried 1gb capacity, and also 4,8,16 and 32gb and all worked witount problems. Take note that you first need to install any file manager to get into usb contents.
Xbox 360 wireless controller: as its seems not to pair, if you use it into any emulator you can pair and configure buttons with it
I tried to use my Logitech g930s and it actually detected it and it allowed to Moro reduce and increase the system volume. Sadly I couldn't hear anything out of them. I might try again some other time.
Glad to hear that multiple USB Devices are working with Ouya.
OP, the Xbox 360 controller is NOT Bluetooth, though the Wii/WiiU/PS3 controllers are.
Sabrent 32' active USB extender works
Logitech Trackman Wheel works
Logitech unifying receiver and MX515 couch mouse work, but is registered as controller 1 at boot. It locked up the OUYA when first tried hot plugging it in to extender. Works when installed before boot, and had been paired by PC.
Belkin 4 port USB hub works plugged in to active 32' cable with trackball and 2gb USB stick. Hot swapped after wireless mouse was unplugged from ouya. wireless Mouse works connected through hub on reconnect. Pushed it with a 32gb stick, which was not recognized. Rebooted and 32gb stick was recognized but not 2gb. Both mice worked but controller still shows up as 2 even though I turned off the mouse when booting.
So what is a good USB game controller available cheap? It is now the end of two business weeks that I requested a replacement controller and I still haven't received it
Sent from my GT-P3113 using Tapatalk 4 Beta
Toshiba 1tb capacity, in NTFS format and helped by an app called "Paragon NTFS&HFS+" worked witout problem, so ouya also has compatibility with high capacity ntfs formatted hard drives ))
TadeoNYC said:
Sabrent 32' active USB extender works
So hat is a good USB game controller available cheap? It is now the end of two business weeks that I requested a replacement controller and I still haven't received it
Sent from my GT-P3113 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Best USB controller hands down is the wired version of the Xbox 360 controller. In the UK its about £20. Very long cable on them with a breakpoint which is handy for kid sisters running through your room. Functions fine under android and windows, can be gotten to work on other Linux systems and Macs fine too. £20 from other brands seems to get you nothing in comparison. Also makes a good club for hitting people when they beat you although the wireless controller has more heft to it so is a bit better there
Nkte, common mistake I have seen people do. Do not buy the play and charge kit for a regular wireless controller thinking it allows you to use it via USB, it doesn't. Also the proper USB reciever for a wireless 360 controller doesn't work correctly on android systems.
Otherwise, Logitech might be your best bet but I personally swear by the wired 360 controllers. Hopefully when the one is released the 360 controllers will have a price crash, I'll probably stock up on a handful more.
I can confirm the PS3 Sixaxis Controller is working!
EDIT: Bluetooth & Wired-connection works fine.
Cool! We have now xbox360 and ps3 sisaxis fully working!!
I have a ps3 media remote but cant get the ouya to see it. Anyone else try this yet?
Update: I was able to see the remote under bluetooth devices but it asks me for a pin number. didnt see one in the manual
Does the xbox 360 wireless adapter (for PC) work for Ouya ?? I got one queued up in my Amazon cart but trying to get some feedback first. Wired 360 controller works great, acts just like an Ouya controller. Wiimote with Wiimote Controller is hit or miss on my programs. Don't have access to any PS3 controllers, but have lots of 360 controllers lying around.
tommy2p said:
Wiimote with Wiimote Controller is hit or miss on my programs.
Click to expand...
Click to collapse
Can you be more specific? So many threads are filled with poor information or redundant information. It would be great if we could all provide as much information as possible. The point of this thread is to inform others of what does and does not work so that they we don't all have to repeat the same trial and error process.
Sent from my GT-P3113 using Tapatalk 4 Beta
tommy2p said:
Does the xbox 360 wireless adapter (for PC) work for Ouya ?? I got one queued up in my Amazon cart but trying to get some feedback first. Wired 360 controller works great, acts just like an Ouya controller. Wiimote with Wiimote Controller is hit or miss on my programs. Don't have access to any PS3 controllers, but have lots of 360 controllers lying around.
Click to expand...
Click to collapse
Yes it does. I cannot compare with a wired one, but for me it is working. The support on the games is not 100% but I dont think that this is a a receiver fault more than a implementation thing. AFAIK there are different input management APIs on ODK. It seems that some games uses hardcoded keycodes instead of new OUYA API for controller compatibility.
For exmplae, in Stalagfligt, none PS3 nor Xbox works, Ice Rage only works with PS3 controller and SCi-Fi fighters with Xbox one.
asanz00 said:
Toshiba 1tb capacity, in NTFS format and helped by an app called "Paragon NTFS&HFS+" worked witout problem, so ouya also has compatibility with high capacity ntfs formatted hard drives ))
Click to expand...
Click to collapse
Do you have to have root for this?
Edit: Yes
tennisbgc said:
I have a ps3 media remote but cant get the ouya to see it. Anyone else try this yet?
Update: I was able to see the remote under bluetooth devices but it asks me for a pin number. didnt see one in the manual
Click to expand...
Click to collapse
Did you try 1234 or 0000? Those tend to be standards for pairing.
Sent from my Hitchhikers Guide to the Galaxy
Hi guys, does anyone know if there's a way to alter the button functions of a USB mouse? I'm using a standard Dell mouse and left, right and middle click are all set to tap, it'd be nice to map right and middle click to different functions if possible, like back and menu.
Are the button functions baked in to the ROM? Or does it depend on which mouse you're using? I had a quick look for mouse button mapping apps but couldn't find anything, it was all virtual mouse apps for controlling PC etc.
Visegrad said:
Did you try 1234 or 0000? Those tend to be standards for pairing.
Sent from my Hitchhikers Guide to the Galaxy
Click to expand...
Click to collapse
someone posted on another site that I should try this app with it https://play.google.com/store/apps/...ImNvbS5qcG4uZnJvbnRpYS53YWthLkJsdWV0b290aCJd
Anyone knows if HFS+ file system is supported out-of-the box?
Logitech K400 wireless keyboard with built in touchpad is working
Kaos2K said:
Anyone knows if HFS+ file system is supported out-of-the box?
Click to expand...
Click to collapse
I think you want "Paragon exFAT, NTFS & HFS+". Free in the Google Play Store.
Anyone use a hub to simultaneously used a mouse ands keyboard?
Sent from my Amazon Kindle Fire using xda app-developers app
Anybody knows if and how the PS3 controller can pair to nexus player. ?
ghus said:
Anybody knows if and how the PS3 controller can pair to nexus player. ?
Click to expand...
Click to collapse
I believe you can use what they describe here under 'Method 1', essentially use an OTG cable to plug it in, then turn the controller on. I don't think you can unplug the controller from the USB cable though, you have to leave it in. http://www.pockethype.net/pair-ps3-controller-android-devices/
Personally I use a Wii U Pro controller with a wireless USB adapter, you might have luck with this PS3 to usb adapter using the 'xinput' setting from the same company: http://www.amazon.com/Wireless-Controller-Adapter-Mayflash-Personal-Computer/dp/B00DSFW5MA
I have not used this adapter for PS3 controllers but the one they make for the Wii U Pro controller works perfectly.
Awesome.. tx!! gotta order me a cable then and give it a shot.
when we get root ,the app sixaxis controller will work for bluetooth control
Sixaxis is broken in lollipop even with root.
Skickat från min GT-I9505 via Tapatalk
Sixaxis Working with Dualshock3
Sixaxis, after latest update, perfectly working with my Dualshock3.
But as you know the app uses root access to change some bluetooth mode/characteristics the Remote won't be working until Sixaxis is disabled or Nexus Player is restarted.
ariful said:
Sixaxis, after latest update, perfectly working with my Dualshock3.
But as you know the app uses root access to change some bluetooth mode/characteristics the Remote won't be working until Sixaxis is disabled or Nexus Player is restarted.
Click to expand...
Click to collapse
Ah.. so you have to disable sixaxis every time after you have used the gamepad. That sucks. Is that just how it is or can it be fixed you think, to have them working simultaneously?
Konstigt said:
Ah.. so you have to disable sixaxis every time after you have used the gamepad. That sucks. Is that just how it is or can it be fixed you think, to have them working simultaneously?
Click to expand...
Click to collapse
I believe the dualshock controllers use some non standard or proprietary Bluetooth protocols. So to work with them the sixaxis controller app needs to change the nexus player Bluetooth to that non standard mode. So I am afraid that they will ever work simultaneously.
ariful said:
I believe the dualshock controllers use some non standard or proprietary Bluetooth protocols. So to work with them the sixaxis controller app needs to change the nexus player Bluetooth to that non standard mode. So I am afraid that they will ever work simultaneously.
Click to expand...
Click to collapse
I think this is true of DS3 but not DS4. I am able to pair my DS4 w/ my Surface Pro 2 (Win 8), Laptop (Win 7), my Nexus 5 (on CM 11s), my friends OPO (CM 11s again) and my Droid Turbo (unrooted KK) w/ nothing special required.
Munkee915 said:
I think this is true of DS3 but not DS4. I am able to pair my DS4 w/ my Surface Pro 2 (Win 8), Laptop (Win 7), my Nexus 5 (on CM 11s), my friends OPO (CM 11s again) and my Droid Turbo (unrooted KK) w/ nothing special required.
Click to expand...
Click to collapse
Yes, the sixaxis application is only needed for controllers < ds4(ps4).
Thanks
ds4
ariful said:
Yes, the sixaxis application is only needed for controllers < ds4(ps4).
Thanks
Click to expand...
Click to collapse
Hi guys!
i have ds4 and i dnt know how to pair my ds4 with NP.. maybe who knows?
Thanks
chevron4ik said:
Hi guys!
i have ds4 and i dnt know how to pair my ds4 with NP.. maybe who knows?
Thanks
Click to expand...
Click to collapse
As stated before you will need to root your NP and install the Sixaxis app to pair your DS4 with it. The point I was making earlier is that while the DS3 does have a proprietary BT protocol the DS4 seems to use a different protocol that works out of the box with Windows and Cyanogenmod but doesnt work with vanilla Android. Until someone comes out with a custom rom or kernel that builds in support for it, you will have to use the Sixaxis app to use PS controllers.
Well for some reason my ds4 is now connecting to my NP natively but input lag is horrendous. When I try to go back to sixaxis it tells me max clients connected. Now i can't use my ds4.will try to restore the np and try again.
ggrammer said:
Well for some reason my ds4 is now connecting to my NP natively but input lag is horrendous. When I try to go back to sixaxis it tells me max clients connected. Now i can't use my ds4.will try to restore the np and try again.
Click to expand...
Click to collapse
Alright so I took my NP to factory specs, relocked and hen started from scratch again unlocking and updating and rooting. Now my DS4 is connecting properly through sixaxis. If you want to use a DS4 do not try to sync it straight with bluetooth yet it will cause problems, until it is supported properly through kernels or updates to bluetooth it will have some nasty input lag and be unusable.
Tried on day one, no go in my part unfortunately.
got sixaxis working but now my nexus player remote is unpared and I cant find a way to repair it even after putting it in pairing mode and searching for bluetooth devices.. any ideas?
TheGeeZus said:
Tried on day one, no go in my part unfortunately.
Click to expand...
Click to collapse
I had to factory reset but someone said that you can just restart bluetooth with adb. I am not sure what it is, try searching the threads.
Found it
shadrach47 said:
I was thinking it was stuck also. So before I wiped, I figured to try turning Bluetooth off/on from terminal. That seemed to do the trick! Both devices showed back up under Bluetooth.
I used commands:
su
service call bluetooth_manager 8
then
service call bluetooth_manager 6
Click to expand...
Click to collapse
Sleeepy2 said:
I had to factory reset but someone said that you can just restart bluetooth with adb. I am not sure what it is, try searching the threads.
Found it
Click to expand...
Click to collapse
No need to DO factory reset !
Use a usb mouse or keyboard ( connected to otg adapter to nexus player ) and goto sixaxis application and click on stop , this will enable blue-tooth service for your original nexus controller.
mrutyunjay said:
No need to DO factory reset !
Use a usb mouse or keyboard ( connected to otg adapter to nexus player ) and goto sixaxis application and click on stop , this will enable blue-tooth service for your original nexus controller.
Click to expand...
Click to collapse
ummm, thanks but I was responding on how to fix it without reseting it.
If I had an OTG cable at the time I would have used it before reseting it, which I didn't and that is why I was responding how to fix it without an OTG cable
Sleeepy2 said:
ummm, thanks but I was responding on how to fix it without reseting it.
If I had an OTG cable at the time I would have used it before reseting it, which I didn't and that is why I was responding how to fix it without an OTG cable
Click to expand...
Click to collapse
simple power cycle will enable the nexus remote if you Just disable the sixaxis auto start on boot with currently paired DS3 , In sixaxis preferences> general settings > auto start.
I think the the nexus player ON BOOT will start pairing process , if no remote is paired.
or
you could use the pair button on the underside ( this pairing will not work if six-axis driver is running)
:angel:
note : you can also pair any phone as remote for nexus player (but this Phone remote will only work for main launcher and apps , but not the in the games ).
Start the BT pairing from the phone (will find the nexus player in search BT devices )
this pairing will also keep the phone in unlocked state ( Trusted device feature ).
play.google.com/store/apps/details?id=com.google.android.tv.remote
Alright I finally found a way to use the dualshock 4 controller with my shield tablet k1 running Android 6.0.
The problem I faced was that when I wanted to pair the controller and tablet it became stuck on the "pairing with..." part.
And since the sixaxis controller app doesn't work on marshmallow I started trying somethings and searched for a solution online.
So maybe there are people that are facing this issue aswell This is how I got it working.
1. First download and install the Sixaxis Pair Tool from the dev's website :
Sixaxis Pair Tool
2. Connect the DS4 controller with a USB cable to the pc and start the Sixaxis Pair Tool you just installed.
3. In the box "Change Master" you want to type the Bluetooth MAC address of your tablet, you can look this up when you go to Settings > About tablet > Status > Bluetooth address
* if you don't see a mac address make sure Bluetooth is turned on.
4. After you filled in the Tablets MAC in the "Change Master" box you hit apply and double check if the new "Current Master" MAC address is the same as the MAC address from the tablet.
Now that the DS4 knows for what MAC address to look for you want to install the following application on the tablet aswell.
* Look for the following app : Bluetooth Auto Connect
The reason we need this app is that for some reason the controllers input starts to lagg after about 30sec after pairing it with the tablet, the only solution I found was using this application.
5. So now that we have the bluetooth application installed aswell we can open the app.
*If the app asks you to turn on Bluetooth just hit OK.
6. Now scroll down to the bottom and tap on "Advanced Options" in here you want to change the following settings:
Rety Count = 1
Rety After(Sec) = 1
Device Timeout(Sec) = 5
Continuous Connect = 2
7. When you changed these settings you can turn on the DS4 controller by pressing on the PS button.
8. Now press on the "Connect Now" button at the bottom of the Advanced Options page.
After 2-3 seconds you will be asked if it is oke to pair the controller with the tablet, select yes and tadaaaaa you have a working DS4 controller on the Nvidia Shield Tablet
So for everything works for me, even the button mapper that can be accessed by holding the Options button on the DS4.
I hope this helps a couple of people !
*If you want to use the DS4 with the PS4 again you need to plug it in the PS4 with the usb cable to pair it again.
Going to try this right now!
EDIT: It works great, able to play donkey kong 64 again hah.
Question
When doing this, if I have a MacBook as my pc but a shield tab, when going to dl the sixaxis pair tool from the dev website do I dl the one for Mac OS X or the one for Windows? Also if you go to the page there's two links for the Windows now which of those two did you use?
Hi great guide
I don't suppose you know if this would work with the Xbox one controller or maybe the Xbox 360 controller ?
Brilapp said:
When doing this, if I have a MacBook as my pc but a shield tab, when going to dl the sixaxis pair tool from the dev website do I dl the one for Mac OS X or the one for Windows? Also if you go to the page there's two links for the Windows now which of those two did you use?
Click to expand...
Click to collapse
Hi !
If you use a MacBook that means you need to download the Mac OS X version they provide, I don't have a Mac so I have no idea how that works. I did a quick google and found this orikad.com/sixpair_instructions.html I suggest you follow that and it should work.
Let me know when you have it working !
steve.loveday said:
Hi great guide
I don't suppose you know if this would work with the Xbox one controller or maybe the Xbox 360 controller ?
Click to expand...
Click to collapse
I'm afraid this won't work for the xbox controllers since they don't use bluetooth, however you can get a 360 controller working if you connect a usb adapter for windows with a usb otg cable.
There is at the moment no way to use a Xbox One controller with any device other can Windows 7,8(.1) and 10 since the wireless adapter only supports these versions of windows.
Great guide Dusty!! I am expecting my nvidia k1 next week and i try to collect info about anything!
One question i have...if you have root, the way to pair the tablet and the ds4 is easier??
x-nivek said:
Great guide Dusty!! I am expecting my nvidia k1 next week and i try to collect info about anything!
One question i have...if you have root, the way to pair the tablet and the ds4 is easier??
Click to expand...
Click to collapse
If you root the tablet you can use this app play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller and connect the DS4 to your tablet with a usb otg cable so you can pair it on your tablet, this is done with 1 press so you don't have to look up the MAC adress etc. However, the app is having problems with newer versions of android 5.1.1+ so I decided to skip the rooting for now and go with this method
Awesome. Thank you.
Thank you so much! Love you for this
_Dusty_ said:
If you root the tablet you can use this app play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller and connect the DS4 to your tablet with a usb otg cable so you can pair it on your tablet, this is done with 1 press so you don't have to look up the MAC adress etc. However, the app is having problems with newer versions of android 5.1.1+ so I decided to skip the rooting for now and go with this method
Click to expand...
Click to collapse
Thanks a lot!! So you suggest not to update to 6.0???
x-nivek said:
Thanks a lot!! So you suggest not to update to 6.0???
Click to expand...
Click to collapse
No no I love 6.0 ! I suggest to update it's just that sixaxis app that isn't compatible but tbh I don't miss it at all [emoji14]
Sent from my SHIELD Tablet K1 using Tapatalk
_Dusty_ said:
I'm afraid this won't work for the xbox controllers since they don't use bluetooth, however you can get a 360 controller working if you connect a usb adapter for windows with a usb otg cable.
There is at the moment no way to use a Xbox One controller with any device other can Windows 7,8(.1) and 10 since the wireless adapter only supports these versions of windows.
Click to expand...
Click to collapse
Thanks for that
When you say I USB adapter are you on about the wireless adapter ?
I do have a old wired Xbox 360 controller would that just work through the otg cable
Cheers
steve.loveday said:
Thanks for that
When you say I USB adapter are you on about the wireless adapter ?
I do have a old wired Xbox 360 controller would that just work through the otg cable
Cheers
Click to expand...
Click to collapse
Yup ! A wired 360 controllers should work without any hassle with a otg cable
To add some information to the thread, I was able to make this work using these steps on an original Shield tablet running Lollipop. Thanks for the tip!
Hi !
Does someone know if this could works with dualshock 3 too ?
Kiiv said:
Hi !
Does someone know if this could works with dualshock 3 too ?
Click to expand...
Click to collapse
I tried to get the DS3 working without root but I haven't found a way yet So no it doesn't work... sadly
Btw it stucks in pairing to , also in stock 5.1.1 on k1!!
x-nivek said:
Btw it stucks in pairing to , also in stock 5.1.1 on k1!!
Click to expand...
Click to collapse
So it's stuck at pairing after you followed my guide ?
If so verify that the master MAC address is the same as your bluetooths MAC.
_Dusty_ said:
So it's stuck at pairing after you followed my guide ?
If so verify that the master MAC address is the same as your bluetooths MAC.
Click to expand...
Click to collapse
Ooops i mean without your guide
I dont know if i should upgrade to MM or not.. Multirom is the only thing that holds me