Related
well I did the OTA.... and ive rooted it following toasts tut... i got it to boot in recover mode... and im doing a NAND backup... oh just finished actually... i swear im not lying lol..
i finished the NAND backup and did a system reebot within the recovery... now let me get this straight tho... within the recovery is where I would flash a new rom yes? if I were to power off the Evo, root is gone right, this is only like a softspl ?
crap...EDIT:
um crap... nvm apparently i didnt update...
i swear I downloaded, installed, restarted the phone to allow install... but it shows software number 1.32.651.1.
maybe because I did a factory reset? then that would mean that this update is rather a patch (ie like a cab fix)??
or did the update not apply?
Ya, I had to download and install the update twice. There is no way root is worth the SD card bug, so until there is root for the patched ROM, no root for me.
The thing is right now we have ghetto root. The other devs have specifically said the update conflicted with root. Best not to install it if you care about it.
Aridon said:
The thing is right now we have ghetto root. The other devs have specifically said the update conflicted with root. Best not to install it if you care about it.
Click to expand...
Click to collapse
I don't. Not gonna bother rooting until after the official 2.2 ROM releases in August or so.
My phone tells me there is a software update. I accept, it goes through the whole process but then says unable to update. I assume its due to me being rooted via gingerbreak?
Is there a way to update?
Is there a way to un-root my phone?
Thanks in advance.
Flipfoot said:
My phone tells me there is a software update. I accept, it goes through the whole process but then says unable to update. I assume its due to me being rooted via gingerbreak?
Is there a way to update?
Is there a way to un-root my phone?
Thanks in advance.
Click to expand...
Click to collapse
Are you try to update via ota? Are you already on 2.3.3? Have you uninstalled any of the preinstalled apps?
If you are on 2.3.3 already there is no new update out for the phone. If you are still on 2.3.2 and are trying update via ota you will need all the preinstalled apps still on the phone, if you have uninstalled anything you will either need to reinstall the apks from here or redo the process of flashing 2.3.2 (to regain the uninstalled apps) then rooting and then doing the ota to update to 2.3.3.
Rooting will not stop you from getting an ota update as long as the bloat is still present. So it would be better to freeze the apps instead of uninstalling (if you plan to do the ota update in october to 2.3.4). If you want to un-root your phone you can reinstall gingerbreak and when you open gingerbreak click unroot, but it is not required to unroot to update.
Thankyou! I cant remember what bloat I deleted, how do I flash 2.2.3? Im a complete noob at all this, but im trying to learn.
Read these threads for how to:
Flashing with flashtool:
http://forum.xda-developers.com/showthread.php?t=1048422
Updating and keeping root on 2.3.3:
http://forum.xda-developers.com/showthread.php?t=1119074
Regards Dousan...
If you dont want to keep root and you have a locked bootloader you can just use SEUS (google it) and it will install 2.3.3 on your phone even if you have uninstalled something. But as said you will loose root.
Or follow the links in Dousan's post to update while keeping root. Just flash the uk 2.3.2, then root, then do the ota update without removing anything and you will be on 2.3.3 with root. There is another guide here diff poster but the same guide really. http://forum.xda-developers.com/showthread.php?t=1116090
Hi guys, after a 6 months period with HTC Wildfire S, i decided it was time to upgrade my device, so here i am, a newbie Nexus S user.
The first things i did with my new toy were unlocking the bootloader, gaining root permissions and installing CWM.
But i noticed that Market isn't updating, it's stuck to THIS version (i think it's 2.13)
Has this anything to do with root and cwm? Or it's just a matter of time and i'll eventually get the update?
Same thing with firmware: at the moment i'm running 2.3.3: looking for updates, and even using the *#*#checkin#*#* code, provided the same result: no FOTA available. Is this due to the root+cwm or i just need to wait?
I know this has already be discussed in the faq, but i find them quite confusing.
I mean, i know i could do a manual update, but i'd like to know whether if i'll ever receive a fota update or if i've lost this chance after root.
Q: I'm rooted with Clockwork and can't install the OTA! I updated to 2.3.1 and lost root! What gives?
most of the time, official OTAs will not install through custom recoveries because of their tendency to break root or restore things like the stock recovery. Also if you've made any modifications to the system files such as replacing the default Mms.apk(messaging) with the custom Black Mms.apk found in the Themes & Apps section, or deleted any .odex files from the system partition, it will not install. The easiest way to update to 2.3.1 is to flash a custom rom such as one of the custom ROMs or use the 2.3.1 Stock NANDROID backup found in the development section. And yes, 2.3.1 "broke root." To regain it, simply follow the steps in this thread: http://forum.xda-developers.com/showthread.php?t=884499 (All credit goes to the original author(s) of the linked thread!). The aforementioned procedure is only needed on the Stock Nandroid Backup, not any of the custom ROMs.
Click to expand...
Click to collapse
Thanks in advance for the answers!
There is no update due to the root, i advice you to manually update your phone to the latest version 4.0.3 using cwm, after that root again. finally you will have rooted ics on your nexus s.
uhm, you say i won't receive updates.
FAQ says most of the time i won't receive them.
THIS thread says i will receive them.
I am confused.
from what I can make sense of, it sounds like you should be getting updates. The FAQ you posted says that if you try to install one of the official OTA updates through CWM, it will fail most of the time.
i don't know how reliable that "checkin" trick is, and it may depend on your carrier as well.
if you've already rooted your device, then i would just flash one of the custom roms, you won't want to go back to the OTA after...
Root/cwm recovery/unlocked boot loader etc has nothing at all to do with your device receiving the ota update notification
albundy2010 said:
Root/cwm recovery/unlocked boot loader etc has nothing at all to do with your device receiving the ota update notification
Click to expand...
Click to collapse
Thats correct. It has only to do with the install. (It will fail).. if you dont get the notification for an ota i dont know whats wrong...
Sent from my Nexus S using xda premium
Ok, finally tonight something started to move.
I received a message saying "A software update is available. Reboot the device to begin the installation" or something like that.
I rebooted and a CWM screen appeared, saying that the update could not be installed due to problems with the signature, sorry i can't remember word by word.
So... how can i know what the update was? I tried to browse the root folder in search for a .zip, but with no success. Any clue?
SavageButcher said:
Ok, finally tonight something started to move.
I received a message saying "A software update is available. Reboot the device to begin the installation" or something like that.
I rebooted and a CWM screen appeared, saying that the update could not be installed due to problems with the signature, sorry i can't remember word by word.
So... how can i know what the update was? I tried to browse the root folder in search for a .zip, but with no success. Any clue?
Click to expand...
Click to collapse
If you had 2.3.3 the update was probably the 2.3.6 and after that you would have received the 4.0.3 update....anyway from what I remember the version of the ota update is showed in the notification bar...isn't it?!
Sent from my Nexus S using XDA
SavageButcher said:
Ok, finally tonight something started to move.
I received a message saying "A software update is available. Reboot the device to begin the installation" or something like that.
I rebooted and a CWM screen appeared, saying that the update could not be installed due to problems with the signature, sorry i can't remember word by word.
So... how can i know what the update was? I tried to browse the root folder in search for a .zip, but with no success. Any clue?
Click to expand...
Click to collapse
1. I assume it was the a step up from 2.3.3 to a max of 2.3.6 as OTA updates to 4.0.3 are currently on hold due to battery drain issue
2. your OTA install is failing because you have custom recovery (CWM) but the OTA updates require the stock recovery (3e)
if you really really want to install OTA updates, you gonna have to go back to stock recovery (do a nand restore, hope you have one) then flash the OTA updates for your device
Hey guys,
I'm hoping this should be a relatively simple question for you to answer. I rooted my Nexus 7 using Wug's Toolkit (on 4.1.1) quite some time ago and received an OTA notification just the other day for 4.1.2. Without thinking, I allowed it to download and let it reboot to install. That was when it booted into Clockwork and there was a signature verification fail. It gave me the option to disable it, but remembering now that I was rooted, I cancelled the update as I figured an OTA wasn't the most sensible thing to do without checking first. My device rebooted fine and is still running 4.1.1 with full root.
After doing some research, I see now that if I use an app like OTA Runkeeper, I can safely run the OTA (or just run it, lose root and then root again).
The problem is that the OTA won't come up anymore. I've tried manually checking for updates a few times but it thinks my device is up to date. What would you suggest I do?
Is there somewhere I can manually download the update and install via Clockwork etc?
Any assistance would be much appreciated!
jazacoop said:
Hey guys,
I'm hoping this should be a relatively simple question for you to answer. I rooted my Nexus 7 using Wug's Toolkit (on 4.1.1) quite some time ago and received an OTA notification just the other day for 4.1.2. Without thinking, I allowed it to download and let it reboot to install. That was when it booted into Clockwork and there was a signature verification fail. It gave me the option to disable it, but remembering now that I was rooted, I cancelled the update as I figured an OTA wasn't the most sensible thing to do without checking first. My device rebooted fine and is still running 4.1.1 with full root.
After doing some research, I see now that if I use an app like OTA Runkeeper, I can safely run the OTA (or just run it, lose root and then root again).
The problem is that the OTA won't come up anymore. I've tried manually checking for updates a few times but it thinks my device is up to date. What would you suggest I do?
Is there somewhere I can manually download the update and install via Clockwork etc?
Any assistance would be much appreciated!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1764794
wbbigdave said:
http://forum.xda-developers.com/showthread.php?t=1764794
Click to expand...
Click to collapse
I saw that, but it was posted back in July, and seemed smaller than the original OTA.
Nevermind... I didn't see the October update to the post further down.
Cheers!
Hey all. I have a rooted D800 (AT&T variant) with stock recovery and on firmware version D80010q. I am trying to update to the KitKat, but It's giving me an error every time I download and try to update. The error is: Err: 0x1111004. When the phone reboots, it says "This device is suspected in rooting. Software update is not available for rooted device".
I have tried using OTA rootkeeper to temporarily unroot, but it doesn't seem to work. Is there any way for me to get the update without having to flash back to stock?
This is my problem too. Hopefully there is a way.
Sent from my LG-D800 using xda app-developers app
Maybe doing a factory reset from stock recovery?
Sent from my LG-D805 using xda app-developers app
rohan611 said:
Hey all. I have a rooted D800 (AT&T variant) with stock recovery and on firmware version D80010q. I am trying to update to the KitKat, but It's giving me an error every time I download and try to update. The error is: Err: 0x1111004. When the phone reboots, it says "This device is suspected in rooting. Software update is not available for rooted device".
I have tried using OTA rootkeeper to temporarily unroot, but it doesn't seem to work. Is there any way for me to get the update without having to flash back to stock?
Click to expand...
Click to collapse
Its due to the custom recovery you have on it..Go back to stock dont root and update...maybe try root keeper to see if that can help
antawnm26 said:
Its due to the custom recovery you have on it..Go back to stock dont root and update...maybe try root keeper to see if that can help
Click to expand...
Click to collapse
nope. as i said in the OP< i have a stock recovery.
rohan611 said:
nope. as i said in the OP< i have a stock recovery.
Click to expand...
Click to collapse
then try root keeper it will disable root but back up root path and reinstate it once the update is done
antawnm26 said:
then try root keeper it will disable root but back up root path and reinstate it once the update is done
Click to expand...
Click to collapse
as i said in the OP...I tried root keeper to temporarily unroot and it didn't work. I'm going back to stock and going from there.
rohan611 said:
as i said in the OP...I tried root keeper to temporarily unroot and it didn't work. I'm going back to stock and going from there.
Click to expand...
Click to collapse
lol..yeah i read each statement in your OP just wanted to get to that last part of you saying your going back to stock and going from there, because thats your next option....
Let us know if you went back to stock then did the update and it worked.
I've read that some people kept root through their OTA. Why are some people able to update and others aren't. I've been reading up on this for the VZW update whenever that happens. I hope I haven't kept all this bloatware on my phone for no reason!!
Sent from my VS980 4G using Tapatalk
hinduboy74 said:
Let us know if you went back to stock then did the update and it worked.
Click to expand...
Click to collapse
I reverted back to stock using the instructions in the Stickied post. I was then able to update to D80010o. I had to call to request a rep to push out the D80010q update again though. They're calling it a "security update" so you should use that phrase when talking to the rep so that they don't get confused and think that you're just requesting that they push out the KitKat update.
Once I got the D80010q update, the KitKat update was available and I was able to update. Unfortunately, I didn't try to root it prior to updating - though to be honest, I don't really feel the need to root anymore. Only reason I had it rooted before was to get the multitasking button, but I'm okay with using an S3 layout (Menu, Home, Back) since that's the phone I'm coming from.
I have posted this in Other thread too.. may be this helps (Or save some time)
1.What ever the phone came with (never saw the version)
2. Rooted: Then just froze the apps I don't need (DID NOT DELETE) NO Exposed Or anything fancy. PURE STOCK just at&T bloat froze.
3. Then the Silent update came... I guess it was 10q (few weeks back), It was fine... ROOT remained.
4. Kitkat update came..
5. I de-froze all the apps before the update..
6. Tried to installed KITKAT after download... (After 1 of 2) it says Err: 0x111004
Once booted it said this update is not for rooted device. (or something similar)
7. I thought may be it recognized SuperSU/Super USer so I Uninstalled (Removed complete ROOT through the app) Download again the Kitkat.. Same ERROR And SAME message. I went it Recovery (Button combo) to complete wipe (Noticed RED Rooted below on the screen on Recovery) did the complete wipe and Still No Luck.
8. Go back to Complete stock through flash method as I realized ROOTED written on recovery so no wipe will help that...
9. chat with AT&T asked them to push 10q the silent updated.
10. once it was done I asked her if she can push Kitkat too.. she did.
The only thing was lost all the data in the process.. But I kept my pic's Auto backup through g+ so they are safe.. rest everything I lost which I don't care anyway. (Chat etc)
SO the BOTTOM LINE IS... If you see ROOTED on your stock recovery NO matter what you do... It will not update. If you dont see it.. then your are fine I Guess ("I guess" is the keyword)
Edit:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
streetsmart999 said:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
Click to expand...
Click to collapse
I used ioroot to root while on D80010d. I think some people who have had success rooted while on D80010o
rohan611 said:
I used ioroot to root while on D80010d. I think some people who have had success rooted while on D80010o
Click to expand...
Click to collapse
That is correct. I was on D80010o all four times I updated to Kit-kat and kept root everytime.
streetsmart999 said:
1.What ever the phone came with (never saw the version)
2. Rooted: Then just froze the apps I don't need (DID NOT DELETE) NO Exposed Or anything fancy. PURE STOCK just at&T bloat froze.
3. Then the Silent update came... I guess it was 10q (few weeks back), It was fine... ROOT remained.
4. Kitkat update came..
5. I de-froze all the apps before the update..
6. Tried to installed KITKAT after download... (After 1 of 2) it says Err: 0x111004
Once booted it said this update is not for rooted device. (or something similar)
7. I thought may be it recognized SuperSU/Super USer so I Uninstalled (Removed complete ROOT through the app) Download again the Kitkat.. Same ERROR And SAME message. I went it Recovery (Button combo) to complete wipe (Noticed RED Rooted below on the screen on Recovery) did the complete wipe and Still No Luck.
8. Go back to Complete stock through flash method as I realized ROOTED written on recovery so no wipe will help that...
9. chat with AT&T asked them to push 10q the silent updated.
10. once it was done I asked her if she can push Kitkat too.. she did.
The only thing was lost all the data in the process.. But I kept my pic's Auto backup through g+ so they are safe.. rest everything I lost which I don't care anyway. (Chat etc)
SO the BOTTOM LINE IS... If you see ROOTED on your stock recovery NO matter what you do... It will not update. If you dont see it.. then your are fine I Guess ("I guess" is the keyword)
Edit:
Also I'm not sure if there are 2 versions of root methods... So if anyone has Root and was able to update to kitkat.. Can you link which Root method you guys used.. Thanks in advance.
Click to expand...
Click to collapse
Same thing happened to me. I followed your advice in the other thread and did a reset using the LG flash tool, following rootjunky's guide on youtube and using the files from his website. Everything went smoothly except for at the end I got the same check flag error thing, but it completed the reset perfectly.
I then chatted with ATT and had him push the update to my phone which brought me up to d80010o. It finally went through the update and didn't get me the root error. So I think I'm in the green now. He said that he didn't have an option to push the kit kat update to my phone but it told him to have me do it through the software update in the settings. Which I tried and it said it was up to date. But he said that since they roll out in batches my phone might just not be ready for it yet. I will keep trying though and I'm one step further than I was before. At least it let me update. Shout out to ATT though, chat service is on point.