Database Users

[Q] Cannot install non-stock kernels.

Okay, so I got the leaked Acer generic Honeycomb 3.1 "update.zip" and it installed without issue. However, after gaining root access (verified via root check), installing Busybox v1.18.4 (1.9 didnt like my device), and installing clockworkmod rev 1.3.4 via Acer recovery I find that I cannot complete the ROM installation. I have tried numerous kernels supposedly geared towards my device to no avail. I did boot into recovery mode, factory reset/wipe, wipe cache, wipe battery statistics, and clear dalvick cache....but it didnt work. None of the three kernels I've tried actually install. So far I have tried "UNITY_V1_2.6.36.4_OC1600_SLQB_CIFS_TUN_VR", "unity_v3_picasso_acer", and "Virtuous_Picasso_v1.0.8_Acer_based_thor-kernel v1.1-beta" They say installation from sd completed, (even though the progress bar lasts all of 3 seconds and the text doesnt properly populate) but I get the boot hang upon power cycle. I did verify that the kernels werent corrupted, and I have been able to unbrick via the 3.1 update.zip. Any help would be appreciated.
Oh and also of note, is that I have two mico SD cards, one 16GB SDHC which for some reason wont mount, and a 2GB SD that mounts properly. Both sd cards were formatted from the tablet.

Try to format /system and /flexrom in the 'mounts and storage' menu of cwr. Then try to reinstall a ROM
Sent from my HTC Desire using XDA App

sc2k said:
Try to format /system and /flexrom in the 'mounts and storage' menu of cwr. Then try to reinstall a ROM
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I will try that and get back to you. Thank you for the suggestion.
edit...
Okay, I followed your suggestions and it didnt make a difference(custom ROM install from SD card completes in 3 seconds, then hangs on the Acer splash screen upon reboot), also while reinstalling the leaked 3.1 stock ROM it gives me a stop error? "random offset 0x339", but completes the installation of said stock 3.1 ROM.

cq842000 said:
I will try that and get back to you. Thank you for the suggestion.
edit...
Okay, I followed your suggestions and it didnt make a difference(custom ROM install from SD card completes in 3 seconds, then hangs on the Acer splash screen upon reboot, also upon reinstalling the leaked 3.1 stock ROM it gives me a stop error? random offset 0x339, but completes the installation of said stock 3.1 ROM.
Click to expand...
Click to collapse
Strange. Check if all partitions can be mounted (from 'mounts and storage' menu). Also, is there anything interesting in /tmp/recovery.log?

According to recovery, everything but the 16GB SD card can be mounted successfully. As for the second suggestion, where would I find the tmp directory? I dont see it in root so where would it be?

cq842000 said:
According to recovery, everything but the 16GB SD card can be mounted successfully. As for the second suggestion, where would I find the tmp directory? I dont see it in root so where would it be?
Click to expand...
Click to collapse
You need adb for this. If you do not have adb, see this guide how to install it (but skip step 7).
Then boot into recovery and try to install a ROM (which will most likely fail). Next, from the console on your pc (the one where you also typed "adb devices") type:
Code:
adb pull /tmp/recovery.log
This will pull the file from your device and save it in the folder where adb is installed.

Alright, I'll get right on it, and get back with some text.

i see here, after u wipe data, u install kernel only zip file???
then you dont have OS flashed, how can it boot
u sholud flash full rom after wipe data, not kernel only..

interqd said:
i see here, after u wipe data, u install kernel only zip file???
then you dont have OS flashed, how can it boot
u sholud flash full rom after wipe data, not kernel only..
Click to expand...
Click to collapse
Lol, I should read the post better next time
@OP: interqd is right. You have to install a full ROM, not just the kernel.
Sent from my HTC Desire using XDA App

interqd said:
i see here, after u wipe data, u install kernel only zip file???
then you dont have OS flashed, how can it boot
u sholud flash full rom after wipe data, not kernel only..
Click to expand...
Click to collapse
Well it looks like I have some more research to do.
These are the instructions I was following...
Overclock Acer Iconia
To begin, copy the kernel you downloaded from the link above, to the root of your SD card.
Once the file is copied, reboot your device into recovery mode. (Power off the device and hold the Power button and Volume down until text in the upper left corner appears. When it does, release the Volume down button.)
Once in the recovery, make a NANDroid backup.
Now, wipe cache and dalvick cache.
Once done, simply flash the kernel you copied to your SD card and let it install and then simply reboot your device.

My n00bish terminology was incorrect, I am trying to flash a custom kernel.

Everytime I try to flash any of those kernels in the original post now I get the garbled screen. What am I doing wrong with the kernels? I followed the instructions to the letter.

Are you trying to install a custom kernel over stock ROM? If so, that's why it's not working. Try with a full custom ROM image.

FloatingFatMan said:
Are you trying to install a custom kernel over stock ROM? If so, that's why it's not working. Try with a full custom ROM image.
Click to expand...
Click to collapse
I suppose I need to find one then. This one that I am using is 3.1 stock but rooted. At any rate, thanks to everyone who took the time to help me find my roots. I've been overclocking notebooks and desktops for years and I thought I'd jump right into the tablet sector as well. Anyways thank you all for your help and guidance.

cq842000 said:
I suppose I need to find one then. This one that I am using is 3.1 stock but rooted. At any rate, thanks to everyone who took the time to help me find my roots. I've been overclocking notebooks and desktops for years and I thought I'd jump right into the tablet sector as well. Anyways thank you all for your help and guidance.
Click to expand...
Click to collapse
There are several in the dev section.

Okay, I just wanted to come in and update. I got the virtuous picasso rom and unity V3 kernel installed and running flawlessly. I am loving it by the way, so now I can get down to what I intended...overclocking and benchmarking. Thank you all for your help.
My goodness it's so easy to overclock these tabs, no doubt due in magnitude to the hard work of the developers of these custom kernels/ROMs.
@ 1.6ghz on Quadrant Standard
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

POSSIBLE FIX FOR PHONES THAT ARE STUCK AT BOOTLOGO AFTER LQ5/LPM + Wipe

THIS GUIDE IS INTENDED ONLY FOR THE 16GB GALAXY S2 I9100 (but a similar procedure can be applied to some other samsung devices)
BIG THANKS TO USER HG42, ALL CREDITS GO TO HIM AS HE IS THE ONE THAT MADE THIS POSSIBLE. THE ORIGINAL GALAXY NOTE THREAD IS HERE
THERE IS NO GUARANTEE THIS WILL WORK, IT DID FOR ME AND A FEW OTHERS BUT YOUR PROBLEM COULD BE SLIGHTLY DIFFERENT. I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE
AFTER FLASHING THE PIT FILE, YOU SHOULD IMMEDIATLY FLASH A SAMSUNG ROM OR A KERNEL VIA ODIN, ESPECIALLY IF YOU STILL HAVE THE LQ5 KERNEL INSTALLED, IN ANY CASE, DON'T TRY TO WIPE DATA AFTER THE PIT FILE FLASH, FLASH A ROM OR A KERNEL BEFORE DOING ANY WIPE
As you must know by now, some users experienced hard bricks after flashing the leaked LQ5 firmware and doing a factory reset or a data wipe, some others, like me, can still access Odin or recovery but no matter what we try we can't get the phone to actually fully boot.
SYMPTOMS:
-You can go into download mode and maybe in recovery
-When you try to wipe data in recovery the phone gets stuck and reboots eventually
-Flashing a firmware through odin doesn't do any good even when the flash was a success
-During the Flash through odin it may get stuck at data.img or fastoryfs depending on the firmware you're trying to flash
If your symptoms aren't the same as those, i would advise not trying this procedure
THE REASON FOR THE "BRICK"
It seems that during the factory reset or data wipe you made after flashing LQ5, the data partition got badly corrupted somehow, and because of that, neither CWM nor Odin can write or format this faulty data partition. This is why you can't boot into any rom.
What you need to do if you're in the same situtation i was into (make sure of it) is to flash a modified pit file which is gonna create a new data partition on your internal sdcard, leaving the faulty one aside, and thus getting a brand new data partition which is gonna make your phone work again, but at the cost of having a smaller internal SD. Other than that, your phone should work exactly as it did.
WARNING / BACKUP
By doing so, you're also repartitionning the internal sdcard, which will result in the loss of everything you have on it, to backup the content of your internal sdcard, you must follow the steps described in THIS THREAD which is the thread started by the man that found the solution to this problem. The thread is a galaxy note thread, but the backup procedure is the same.
Once you have backed up what you wanted to backup, and made sure you read everything carefully, you can proceed to the flashing of the modified pit file.
AFTER FLASHING THE PIT FILE, YOU SHOULD IMMEDIATLY FLASH A SAMSUNG ROM OR A KERNEL VIA ODIN, ESPECIALLY IF YOU STILL HAVE THE LQ5 KERNEL INSTALLED, IN ANY CASE, DON'T TRY TO WIPE DATA AFTER THE PIT FILE FLASH, FLASH A ROM OR A KERNEL BEFORE DOING ANY WIPE
The zip containing the modified PIT files can be found in THIS THREAD at the end of the first post.
STEP BY STEP
-Put your phone into Download Mode
-Flash the modified pit using odin, NOTHING ELSE
-After pit flash, the phone will try to reboot, and will get stuck. Remove the battery
-Go into Download Mode.
-Flash a clean, unmodified, samsung firmware (like KI4) WITHOUT PUTTING ANY PIT FILE
-Reboot in stock recovery, do a factory reset
-Reboot phone
-Format internal sdcard
-You should be good to go
ALTERNATIVE WAY (NOT RECOMMENDED)
-Put your phone into Download Mode
-Flash the modified pit using odin, NOTHING ELSE
-After pit flash, the phone will try to reboot, and will get stuck. Remove the battery
-Go into Download Mode.
-Flash a custom kernel with Odin.
-Then Boot into recovery and install a rom from a zip which must be on your external SD
I hope this works for you as well as it did for me. Good luck, and congratulations to hg42 for finding a way to get our devices working again

edit: OP entirely changed his post since my response, rendering it incorrect.

Worked for me too
Tried everything was beginning to give up tried this and my phone works again thanks alot

Glad it worked for you mate.
Next time we'll think twice before flashing a leaked firmware.
Sent from my GT-I9100 using xda premium

Doesnt work for me , i can now go to recovery mode but i can't format/wipe data. i tried with flashing Siyah 3.3.2 tar but formatting data is not possible again .
Thanks anyway for your work .

The same thing for me
limpbizkit said:
Doesnt work for me , ican now go to recovery mode but still can't format/wipe data. i tried with flashing Siyah 3.3.2 but formatting data is not possible.
Thanks anyway for your work .
Click to expand...
Click to collapse
Hi, the same thing happend with me. Now I can enter in recovery but I cant wipe data.
I´m thinking of try this http://forum.xda-developers.com/showthread.php?t=1457458
To do that should I flash first the original Pit file???????
Thanks

limpbizkit said:
Doesnt work for me , i can now go to recovery mode but i can't format/wipe data. i tried with flashing Siyah 3.3.2 tar but formatting data is not possible again .
Thanks anyway for your work .
Click to expand...
Click to collapse
Heeyyy!!!! Bro, i found an alternative for us. It worked for me so with you will work to!!!
Im from argentina and my english is not good. So, sorry for that.
Ok, do this:
1/ Download resurrection remix v2.5.3
2/ Flash siyha v3.3.2
3/ Enter to the recovery
4/ Go to "dual-boot options
5/ Select "install zip to second rom from external sd. Automatically siyah will create a second data partition.
6/ select the rom from the external sd and install it. Then restart and enter in recovery again
7/ go to "dual boot options / wipe second rom dalvik-cache.
8/ go to dual boot options / fix second rom permissions
9/ go to dual boot options / wipe second rom data cache
10/ reboot and you will see during boot the next reading: press home o volume button to enter to second rom.... so, press the home buttom and the phone will revive!!!!!!
I must say that every time the phone starts you have to choose to enter the second rom. This solution sucks, but at least your phone will work.
good luck

dejarque88 said:
Hi, the same thing happend with me. Now I can enter in recovery but I cant wipe data.
I´m thinking of try this http://forum.xda-developers.com/showthread.php?t=1457458
To do that should I flash first the original Pit file???????
Thanks
Click to expand...
Click to collapse
any help for this problem

dejarque88 said:
Hi, the same thing happend with me. Now I can enter in recovery but I cant wipe data.
I´m thinking of try this http://forum.xda-developers.com/showthread.php?t=1457458
To do that should I flash first the original Pit file???????
Thanks
Click to expand...
Click to collapse
Have you tried flashing a samsung rom? Are you still on LQ5 kernel?
If this still fails after trying to flash a samsung rom using odin, i think you should indeed flash the original PIT, which will make things back the way they were before, even if it didn't work then

when i use Odin to install original rom , it stuck on data.img
and when I use recovery to wipe factory or cache , it stuck on formatting data
(( I used pit stock and i9100_u1_02_20110310_emmc_EXT4-patched-standard ))

a0007 said:
when i use Odin to install original rom , it stuck on data.img
and when I use recovery to wipe factory or cache , it stuck on formatting data
(( I used pit stock and i9100_u1_02_20110310_emmc_EXT4-patched-standard ))
Click to expand...
Click to collapse
After flashing just the Pit file, did you try to wipe data or did you try to flash a Samsung ROM with odin directly?

d.fx said:
After flashing just the Pit file, did you try to wipe data or did you try to flash a Samsung ROM with odin directly?
Click to expand...
Click to collapse
I tried both ways but i did not work

a0007 said:
I tried both ways but i did not work
Click to expand...
Click to collapse
Were you using the LQ5 kernel when you tried to wipe data after the PIT flash ? I hope you weren't.

d.fx said:
Were you using the LQ5 kernel when you tried to wipe data after the PIT flash ? I hope you weren't.
Click to expand...
Click to collapse
yep :crying:

a0007 said:
yep :crying:
Click to expand...
Click to collapse
arf man, you should have stick to the step by steps and just that. There is still little hope though, send a PM to hg42 explaining that you flashed his modified galaxy s2 pit file but that you did the same mistake again (that i did too, but only once) , which was to wipe data using LQ5 kernel. Basically i think you now have two ****ty data partitions, back to square one.
He might be able to build a new Pit specially for you to flash in which yet another data partition will be created, next to the one you just screwed.
I modified my post to make it even clearer that you shouldn't wipe data while using LQ5 kernel.
Good luck man

is this guide only for people who can access to download mode?
my phone not response to any thing
what the solution for me?

Unfortunately some people were lucky enough to only soft brick their phones when other hard bricked them.
No solution for the hard bricked ones for now.
Sent from my GT-I9100 using xda premium

d.fx said:
Unfortunately some people were lucky enough to only soft brick their phones when other hard bricked them.
No solution for the hard bricked ones for now.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
even using riff box jtag
mobiletechvideos.mybigcommerce.com/

moshxsoft said:
even using riff box jtag
mobiletechvideos.mybigcommerce.com/
Click to expand...
Click to collapse
Looks like not even the JTAG is effective. At least for now
Sent from my GT-I9100 using xda premium

d.fx said:
THIS GUIDE IS INTENDED ONLY FOR THE 16GB GALAXY S2 I9100 (but a similar procedure can be applied to some other samsung devices)
BIG THANKS TO USER HG42, ALL CREDITS GO TO HIM AND HIS BRILLIANT MIND
THERE IS NO GUARANTEE THIS WILL WORK, IT DID FOR ME AND A FEW OTHERS BUT YOUR PROBLEM COULD BE SLIGHTLY DIFFERENT. I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE
AFTER FLASHING THE PIT FILE, YOU SHOULD IMMEDIATLY FLASH A SAMSUNG ROM OR A KERNEL VIA ODIN, ESPECIALLY IF YOU STILL HAVE THE LQ5 KERNEL INSTALLED, IN ANY CASE, DON'T TRY TO WIPE DATA AFTER THE PIT FILE FLASH, FLASH A ROM OR A KERNEL BEFORE DOING ANY WIPE
As you must know by now, some users experienced hard bricks after flashing the leaked LQ5 firmware and doing a factory reset or a data wipe, some others, like me, can still access Odin or recovery but no matter what we try we can't get the phone to actually fully boot.
SYMPTOMS:
-You can go into download mode and maybe in recovery
-When you try to wipe data in recovery the phone gets stuck and reboots eventually
-Flashing a firmware through odin doesn't do any good even when the flash was a success
-During the Flash through odin it may get stuck at data.img or fastoryfs depending on the firmware you're trying to flash
If your symptoms aren't the same as those, i would advise not trying this procedure
THE REASON FOR THE "BRICK"
It seems that during the factory reset or data wipe you made after flashing LQ5, the data partition got badly corrupted somehow, and because of that, neither CWM nor Odin can write or format this faulty data partition. This is why you can't boot into any rom.
What you need to do if you're in the same situtation i was into (make sure of it) is to flash a modified pit file which is gonna create a new data partition on your internal sdcard, leaving the faulty one aside, and thus getting a brand new data partition which is gonna make your phone work again, but at the cost of having a smaller internal SD. Other than that, your phone should work exactly as it did.
WARNING
By doing so, you're also repartitionning the internal sdcard, which will result in the loss of everything you have on it, to backup the content of your internal sdcard, you must follow the steps described in THIS THREAD which is the thread started by the man that found the solution to this problem. The thread is a galaxy note thread, but the backup procedure is the same.
Once you have backed up what you wanted to backup, and made sure you read everything carefully, you can proceed to the flashing of the modified pit file.
AFTER FLASHING THE PIT FILE, YOU SHOULD IMMEDIATLY FLASH A SAMSUNG ROM OR A KERNEL VIA ODIN, ESPECIALLY IF YOU STILL HAVE THE LQ5 KERNEL INSTALLED, IN ANY CASE, DON'T TRY TO WIPE DATA AFTER THE PIT FILE FLASH, FLASH A ROM OR A KERNEL BEFORE DOING ANY WIPE
Here is the zip file containing the modified pit file : http://forum.xda-developers.com/attachment.php?attachmentid=1185385&d=1341775209
The file you need to flash is in the main folder and is called i9100_u1_02_20110310_emmc_EXT4-patched-standard.pit
STEP BY STEP
-Put your phone into Download Mode
-Flash the modified pit using odin, NOTHING ELSE
-After pit flash, the phone will try to reboot, and will get stuck. Remove the battery
-Go into Download Mode.
-Flash a clean, unmodified, samsung firmware (like KI4) WITHOUT PUTTING ANY PIT FILE
-Reboot in stock recovery, do a factory reset
-Reboot phone
-Format internal sdcard
-You should be good to go
ALTERNATIVE WAY (NOT RECOMMENDED)
-Put your phone into Download Mode
-Flash the modified pit using odin, NOTHING ELSE
-After pit flash, the phone will try to reboot, and will get stuck. Remove the battery
-Go into Download Mode.
-Flash a custom kernel with Odin.
-Then Boot into recovery and install a rom from a zip which must be on your external SD
I hope this works for you as well as it did for me. Good luck, and congratulations to hg42 for finding a way to get our devices working again
Click to expand...
Click to collapse
You are my S2 saver! Thank you! Thank you!
Since Thursday, when i lost my S2 because of LQ5, i have been trying to find any possible solution through ODIN, but the same result: S2 stacked on logo screen.
Today i decided to send my S2 to Samsung, but the last minute i saw your thread.
I had nothing to loose so i decide to give it another try and I GOT MY PHONE BACK!
After formatting internal card i got back 9,54 Gb. I remember that i had 11Gb free before LQ5 but right now its not major problem.
Once more
Thank you!!!!!

[Q] Booting Problem

Hey Guys,
i have a problem with flashing custom recovery on my I9505(jfltexx).
When i flash "DBT-I9505XXUBMEA-20130601103235" via Odin and in addition the "CF-Auto-Root-jflte-jfltexx-gti9505" my phone boots up, most of the time but not all the time. Now when i try to flash custom Recovery via Odin, my phone stucks at the Samsung Galaxy Logo and it wont continue. Even if i enter the standard recovery from Goomanager and i select "reboot system now" it stucks on the Logo!
Any Help?
Thanks in Advance

Faschoda said:
Hey Guys,
i have a problem with flashing custom recovery on my I9505(jfltexx).
When i flash "DBT-I9505XXUBMEA-20130601103235" via Odin and in addition the "CF-Auto-Root-jflte-jfltexx-gti9505" my phone boots up, most of the time but not all the time. Now when i try to flash custom Recovery via Odin, my phone stucks at the Samsung Galaxy Logo and it wont continue. Even if i enter the standard recovery from Goomanager and i select "reboot system now" it stucks on the Logo!
Any Help?
Thanks in Advance
Click to expand...
Click to collapse
U can try going to Stock or The recovery u installed which ever u are able to open
Just wipe cache & reboot
It should work well if this does not work
Flash a pre rooted firmware
http://forum.xda-developers.com/showthread.php?t=2255190&highlight=pre+rooted+i9505
And flash PHILZ recovery 100 % there wont be any problem and ya after flashing a firmware do Reset from the device and then flash recovery

123hiten said:
U can try going to Stock or The recovery u installed which ever u are able to open
Just wipe cache & reboot
It should work well if this does not work
Flash a pre rooted firmware
http://forum.xda-developers.com/showthread.php?t=2255190&highlight=pre+rooted+i9505
And flash PHILZ recovery 100 % there wont be any problem and ya after flashing a firmware do Reset from the device and then flash recovery
Click to expand...
Click to collapse
Yeah but thats the problem. I can't enter the recovery mode and when i try to flash a PRE-rooted rom from djembey my device stuck at the BootLogo.
In a nutshell: There is no option performing a wipe!

Faschoda said:
Yeah but thats the problem. I can't enter the recovery mode and when i try to flash a PRE-rooted rom from djembey my device stuck at the BootLogo.
In a nutshell: There is no option performing a wipe!
Click to expand...
Click to collapse
do not enter the recovery from and app
to enter a recovery power off device unplug it
press volume up + home + power all together till samsung logo appear and realease it
U will have a stock recovery or the one u installed
from there u will have factory reset and wipe cache bth option
let me know or some images u get would be more easy for us to help you with

123hiten said:
do not enter the recovery from and app
to enter a recovery power off device unplug it
press volume up + home + power all together till samsung logo appear and realease it
U will have a stock recovery or the one u installed
from there u will have factory reset and wipe cache bth option
let me know or some images u get would be more easy for us to help you with
Click to expand...
Click to collapse
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!

Faschoda said:
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!
Click to expand...
Click to collapse
Ok now i get it as per what i see i can still get your device back to normal but myte take multiple try rest assured it will work
1st flash a stock firmware again (not rooted pure stock) this time using pit file along with firmware
and while flashing the firmware using odin and pit do check re-partition also
Note with out pit file do not check the re-partition box
and once the flashing is done device should boot if its not booting
go to stock recovery like how i told u earlier and do factory reset and wipe cache
and reboot
and tell me the status.. all the best
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware get pit file/ stock firmware from here for ur variant

123hiten said:
Ok now i get it as per what i see i can still get your device back to normal but myte take multiple try rest assured it will work
1st flash a stock firmware again (not rooted pure stock) this time using pit file along with firmware
and while flashing the firmware using odin and pit do check re-partition also
Note with out pit file do not check the re-partition box
and once the flashing is done device should boot if its not booting
go to stock recovery like how i told u earlier and do factory reset and wipe cache
and reboot
and tell me the status.. all the best
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware get pit file/ stock firmware from here for ur variant
Click to expand...
Click to collapse
So let me get this clear. In Odin i should check the stock Rom in PIT instead of PDA? And check the Re-Partion box?

Faschoda said:
So let me get this clear. In Odin i should check the stock Rom in PIT instead of PDA? And check the Re-Partion box?
Click to expand...
Click to collapse
In Odin
PDA - u should select firmware stock one
PIT - select pit file
Re- partition should be check follow the image and flash
If Re-Partition is checked u must have pit file also do not forget that else u myte brick ur device

Faschoda said:
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!
Click to expand...
Click to collapse
Based on what you said, it seem like you still have all the partitions intact. Just that they are empty right now.
Did you do a full backup before all this problem happen? Or did you do a custom backup?
Are your backups stored in external memory and is a full backup? If so, try using custom recovery to restore your backup?

123hiten said:
In Odin
PDA - u should select firmware stock one
PIT - select pit file
Re- partition should be check follow the image and flash
If Re-Partition is checked u must have pit file also do not forget that else u myte brick ur device
Click to expand...
Click to collapse
lzk123 said:
Based on what you said, it seem like you still have all the partitions intact. Just that they are empty right now.
Did you do a full backup before all this problem happen? Or did you do a custom backup?
Are your backups stored in external memory and is a full backup? If so, try using custom recovery to restore your backup?
Click to expand...
Click to collapse
That's Bull****. Nothing worked -.-

Faschoda said:
That's Bull****. Nothing worked -.-
Click to expand...
Click to collapse
Chill. Your phone is definitely not bricked. I encountered your problem before when i was experimenting with something.
- Right now, boot to whatever recovery that you have. Try to wipe cache, dalvik, and any other partition if possible.
- After that, boot to download mode and try to flash STOCK rom using odin. Check that flash was success.
- Try to boot your phone and report here on what happens.
Edit: You might want to consider restarting your computer and changing usb port. "Faulty" Usb port will affect the flashing part.

lzk123 said:
Chill. Your phone is definitely not bricked. I encountered your problem before when i was experimenting with something.
- Right now, boot to whatever recovery that you have. Try to wipe cache, dalvik, and any other partition if possible.
- After that, boot to download mode and try to flash STOCK rom using odin. Check that flash was success.
- Try to boot your phone and report here on what happens.
Click to expand...
Click to collapse
Again thanks for your effort! Much appreciated!
HOOOOOOOOOOOOOOOOOOOOOOOOLLLYYY C*****************************************************!!!
That worked. It boots now!!!!!!

Faschoda said:
Again thanks for your effort! Much appreciated!
HOOOOOOOOOOOOOOOOOOOOOOOOLLLYYY C*****************************************************!!!
That worked. It boots now!!!!!!
Click to expand...
Click to collapse
Glad to hear that.
Remember to always make a nandroid backup! I recommend using Philz Touch Recovery

lzk123 said:
Glad to hear that.
Remember to always make a nandroid backup! I recommend using Philz Touch Recovery
Click to expand...
Click to collapse
How shall i install custom recovery? Via Odin or can i boot into stock recovery and apply update from there?

Faschoda said:
How shall i install custom recovery? Via Odin or can i boot into stock recovery and apply update from there?
Click to expand...
Click to collapse
Download the .tar file of the custom recovery. Flashed it through odin, at the PDA section.

Faschoda said:
That's Bull****. Nothing worked -.-
Click to expand...
Click to collapse
Behave your speech smart guy, they are trying to help!
general rule on how to fix a bootloop:
1- Wipe data and cache. If not,
2- Restore a nandroid backup if available. If not,
3- Flash stock firmware, If not,
4- Flash stock firmware with pit file (you can try pit file alone).

samersh72 said:
Behave your speech smart guy, they are trying to help!
general rule on how to fix a bootloop:
1- Wipe data and cache. If not,
2- Restore a nandroid backup if available. If not,
3- Flash stock firmware, If not,
4- Flash stock firmware with pit file (you can try pit file alone).
Click to expand...
Click to collapse
Soooorrry! Wasn't meant in an offensive Way!

Faschoda said:
Soooorrry! Wasn't meant in an offensive Way!
Click to expand...
Click to collapse
NVM, no problem

Glad that u got ur device back my friend i knew its just a matter of time b4 we give up
Here on instead of creating new thread please put it in Q&A thread u ll have many people giving u faster solutions the link is in my signature
All the Best :good:

[Tutorial] How to Flash and Root and Galaxy S Hoppin [SHW M190S]

To Get General Idea about Flashing read the following threads (also written by me for other models)
How to Root Korean Phones
How to Flash M110S & PIT STOP
How to Flash M100S
Downloads for SHW M190S HOPPIN
PIT & Odin attached below
Stock ROM
All SHW M190S Hoppin ROM's
EA26
VG12
VH04
WC16
WD19 Part 1, Part 2, Part 3, Part 4.
Root
Framaroot just install app and get root instantly.
unlockroot
cydia Impactor
Rooting Kernels
Tegrak VG12
Tegrak WD19
Download mode: Volume Down + Home key + Power.
General advice prior to Flashing any phoneIts always best to do a "clean" install. meaning you should remove any old scripts, data, cache, junk before flashing a new ROM, this is like taking a bath before using new clothes. For some models it is a must do, for others it may not be a major problem or can be resolved by flashing the dbdata.rfs to clear out the remaining junk that you failed to remove before flashing . But if you had "lagfix" and did not undo it, it can cause internal SD card unavailable situation, which can be difficult to resolve.
Hence before flashing its advisable to
a) undo lagfix, IF you had any.
b) Do a factory reset by settings>Privacy> factory reset ( erase SD Card - optional , as formatting SD card could be too)
c) And even going into recovery to wipe everything is also good.
d) Removing SIM Card and External SD card ( makes it easier for phone to boot up initially after flashing a new ROM)
Doing this will give you a "Clean" install or fresh start for your phone.
Make sure your Battery Charge is more than 50%, Samsung requires you to have 100% charge when using KIES to upgrade.
Reminder, What you do with your Phone is your own responsibility, so do it at your own risk​ ​Flashing Procedure for Stock ROM using Odin3​
1). You need to Factory Reset Phone first go to settings >Privacy> factory reset also can be done in recovery
2) Power Down and Enter Recovery Mode and wipe data and wipe cache
3) Power down and remove battery, Then reinsert the battery and Enter Download Mode
4) Fireup Odin3 on PC and Connect phone with USB cable to PC
5) Now select the ROM you had downloaded in Odin under PDA ( do not tick or press anything else )
5a) This is optional, depending on needs, meaning if your phone has problems than PIT file is used to partition the partitions.
When using , select M190S PIT file under PIT and (make sure re-partition is checked on Odin3)
When not using do not select re-partition on Odin3
6) Press Start Button on Odin3 and wait till is completed
7) Once phone has booted up and everything is working, power down and enter Recovery Mode, here you "factory Reset" phone one more time
That's it Now you will be using the new ROM you just flashed.
For Rootiing M190S using Tegrak kernel, ​Flashing Procedure for Custom ROMs using CWM
like CM, AOKP, MIUI​
Custom ROM Downloads
Download from Here CWM Recovery, CM, AOKP MIUI etc
CM 9.1 all fixed
Basic Knowledge ​
First make a Backup of your current ROM, such that you can return to it, IF the ICS, Jelly Bean ROM is not what you expected it to be. How?
When Using a tegrak Kernel on the M190S , you can get this done on the bootup screen , by entering it and making a system and also a dbdata/data backup of your phone, which can be restored by using the terak kernel again IF WD19 ROM is what suits you best.
Your backup will be placed in the Tegrak Folder in the Internal SD card...so save this to your PC or external SD card for safe keeping.
Stock and Tegrak Kernel cannot be used for ICS or Jelly Bean ROM, and you need to use a Version 5 and up CWM (ClockWorkMOD) recovery, to flash the Jelly Bean or ICS ROM direct from your SD card...as such the first thing you need to do is change the Recovery on your M190S to a version 5 ClockWorkMOD.
Which means you need to use Odin and Flash the recovery.tar in download mode, just like you flash kernels and gingerbread ROM's on your phone in the past.
Here is the basic procedure for Jelly Bean or ICS Roms upgrade​
1) Download the CWM Recovery.tar File attached below, the ROMs in .zip format ( it can be as many as you wish, for you to test them out, one after the other) and Place them in a Folder (create and name it as you wish) on your SD Card Also Download the Gapps.zip (Google apps) Files that need to be flashed after flashing the ROM. ( So it will always be two packages to flash, in order to get your phone functioning)
2) Flash the version 5 and up CWM recovery on your Phone, How?
Put your phone into download mode, Fireup Odin3 on your PC, connect to Odin3 with USB cable, select CWM Ver.5.0 recovery.tar under PDA and Flash it. Ensure you do not reboot the phone by "UNTICK" reboot in Odin3 such that it will not power ON after Flashing, in case it does power ON, just pull out Battery , press power button for 30 seconds and insert battery again
3) After flashing recovery with Odin, You can enter " Recovery Mode" . You do this every-time you want to switch to a JellyBean or iCS ROM or to utilize the many features this recovery has, like Backup/restore/fix permissions and mostly to do the full wipes (NEEDED to be done every time you want to SWITCH ROMS) etc
4) Once in CWM Recovery you do the Full wipes (use your volume keys to move up or down in the recovery menu to select and the power key to execute that command).
The undermentioned wipes need to be done and will constitute a FULL Wipe of your Phone but your SD card will not be fully formatted as such your Images and other non system files will remain as is.
a) Wipe data / Factory reset
b) Wipe cache
c) Enter advanced and wipe dalvic Cache
Once the full wipes are done,
5) You now choose the ROM you placed in your SD card by selecting "Install zip from sdcard" which will lead you to "choose zip from sdcard", which will take you to all the folders you have on your SD Card..scroll down to where you placed the downloaded files and select it
Once selected the ROM will be Flashed on to your phone, so wait till it says "install completed" Now you do the same selection process again (Step 5) to select the Gapps file and wait till it says "Install completed"
6) That's it, Now select "Reboot system Now".
Now the ROM has been installed on your phone, so let it boot up and you can repeat this procedure to switch again and again till you have the best ROM of your choosing.
​
In the event that it fails to boot-up or you placed a wrong ROM that caused a boot loop or any other problem, just look in My Android Solutions , IF you cannot enter Recovery mode to flash another ROM.
You can also use Odin3 to Flash a Gingerbread ROM in Download mode and use your backup to return your phone to its original state.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Cannot boot after flashing recovery
I flashed recovery as mentioned in the post..
when I power on, it shows that blue line and fills it.. after filling is complete it stays there.. nothing happens thereafter..

devo.dce said:
I flashed recovery as mentioned in the post..
when I power on, it shows that blue line and fills it.. after filling is complete it stays there.. nothing happens thereafter..
Click to expand...
Click to collapse
Read again and follow it carefully, you do not boot phone after flashing recovery, you power down and enter recovery to flash the ROM.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

need advice
please help me guys... my hoppin bricked i dont know why... its stuck in bootloop recovery mode and samsung anycall logo change .. and display an error message
E:failed to mount /dbdata(invalid argument)
failed on /dev/block/stl10
etc
any solution?

pocongdongok said:
please help me guys... my hoppin bricked i dont know why... its stuck in bootloop recovery mode and samsung anycall logo change .. and display an error message
E:failed to mount /dbdata(invalid argument)
failed on /dev/block/stl10
etc
any solution?
Click to expand...
Click to collapse
stl10 means you have some junk in your data partition, (most likely mp3 files) that needs clearing, so you have to flash the dbdata.rfs already in your ROM package one more time, try to unzip the ROM and flash only the dbdata.rfs file using Odin3 as PDA
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
stl10 means you have some junk in your data partition, (most likely mp3 files) that needs clearing, so you have to flash the dbdata.rfs already in your ROM package one more time, try to unzip the ROM and flash only the dbdata.rfs file using Odin3 as PDA
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
im already unzip the ROM . theres only 3 file (modem.bin , z image , and factoryfs)... theres no dbdata.rfs... what should i do now sir? sorry for my english
where can i get boot.img
sbl.bin
recovery.img
cache.img
data.img
hidden.img
param.lfs
for shw-m190s ? thanks for you help before

pocongdongok said:
im already unzip the ROM . theres only 3 file (modem.bin , z image , and factoryfs)... theres no dbdata.rfs... what should i do now sir?
Click to expand...
Click to collapse
I am not sure which m190s ROM has the CSC files as well as others that you mention and I do not use this model, so I will attach the dbdata.rfs file for M110S, which is identical and closest to this model, flash it to recover and solve your problem after that you can flash the WD19 ( M190S Latest ROM) to make it perfect.
Flash this as "PDA" using Odin3 version 1.7
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
I am not sure which m190s ROM has the CSC files as well as others that you mention and I do not use this model, so I will attach the dbdata.rfs file for M110S, which is identical and closest to this model, flash it to recover and solve your problem after that you can flash the WD19 ( M190S Latest ROM) to make it perfect.
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
still stuck at recovery mode... samsung galaxy s hoppin boot logo didnt appear ..

pocongdongok said:
still stuck at recovery mode... samsung galaxy s hoppin boot logo didnt appear ..
Click to expand...
Click to collapse
Remove Ext SD card as well as SIM card first. After that press and hold power button for a min , reboot phone, than do a full wipe ( factory rest & Wipe cache) in recovery mode after that flash the ROM again
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
Remove Ext SD card as well as SIM card first. After that press and hold power button for a min , reboot phone, than do a full wipe ( factory rest & Wipe cache) in recovery mode after that flash the ROM again
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
:crying: not working....

pocongdongok said:
:crying: not working....
Click to expand...
Click to collapse
can you tell me what you flashed from the beginning?, I mean the files you used and the procedure, also did you have any lag fix prior to flashing?
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
can you tell me what you flashed from the beginning?, I mean the files you used and the procedure, also did you have any lag fix prior to flashing?
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
my bad... first i follow procedure for Jelly Bean or ICS Roms upgrade but stuck at booting (blue line loading) then i flashing again with stock rom wd19 and stuck at recovery mode, flashing again with EA 26 Froyo.... damn..!! it make worse .. stuck at recovery mode with cache error message and samsung anycall logo CHANGE ... i dont know why... i flashing again with cache,rfs ,,, error mesage gone but still stuck in recovery mode with strange anycall logo.. flash again with pit .. not working anyway
this driving me crazy...

pocongdongok said:
my bad... first i follow procedure for Jelly Bean or ICS Roms upgrade but stuck at booting (blue line loading) then i flashing again with stock rom wd19 and stuck at recovery mode, flashing again with EA 26 Froyo.... damn..!! it make worse .. stuck at recovery mode with cache error message and samsung anycall logo CHANGE ... i dont know why... i flashing again with cache,rfs ,,, error mesage gone but still stuck in recovery mode with strange anycall logo.. flash again with pit .. not working anyway
this driving me crazy...
Click to expand...
Click to collapse
you need to read and follow the guide, for factory reset, and wipes are very important and must be done for Korean versions. In fact Internal SD card has to be formatted before flashing for Korean phones.
so now try this use PIT file (re partition must be ticked) with the froyo ROM , you need to enter recovery to do wipes once it has booted, read the guide.
if that failed than use the CWM recovery with auto reboot unticked , after that power down by removing battery than enter CWM using combo keys, here you need to the wipes as mentioned in the guide than flash the Jellybean ROM using CWM
Check this out! You , YES! you are an " Android ". Not your phone but U.​

xsenman said:
you need to read and follow the guide, for factory reset, and wipes are very important and must be done for Korean versions. In fact Internal SD card has to be formatted before flashing for Korean phones.
so now try this use PIT file (re partition must be ticked) with the froyo ROM , you need to enter recovery to do wipes once it has booted, read the guide.
if that failed than use the CWM recovery with auto reboot unticked , after that power down by removing battery than enter CWM using combo keys, here you need to the wipes as mentioned in the guide than flash the Jellybean ROM using CWM
Check this out! You , YES! you are an " Android ". Not your phone but U.​
Click to expand...
Click to collapse
oh god.. thanks... (solved) :laugh: hahaha... i use shw-m110s param.lfs 's .. its save my ass.. and now my booting logo has change... ! thank for your help... :victory:

its really work procedure for Jelly Bean or ICS Roms upgrade? why i am always fail...?
i think cwm not working in shw-m190s ... everytime i wipe dalvik cache .. show e:unknown volume for path [sd-ext] ? any idea?

pocongdongok said:
its really work procedure for Jelly Bean or ICS Roms upgrade? why i am always fail...?
i think cwm not working in shw-m190s ... everytime i wipe dalvik cache .. show e:unknown volume for path [sd-ext] ? any idea?
Click to expand...
Click to collapse
Maybe your phone don't like it any problems look here first about the problem you are getting or try and READ the guide and follow it step by step as this ROM and Recovery was designed for and is used for M110S
Check this out! You , YES! you are an " Android ". Not your phone but U.​

m190s stuck on recovery mode after root gingerbread
:crying: sir please help me ... i install cwm on m190s .. after stuck on recovery mode . please give me solution

Rigel.star said:
:crying: sir please help me ... i install cwm on m190s .. after stuck on recovery mode . please give me solution
Click to expand...
Click to collapse
solution depends on what and how you try to root your phone, so if you don't provide all the details and what you phone is saying on its screen, its not possible to guess what you did.
but if you flashed CWM and reboot phone, you need to read the guide again, as it is written, you should not reboot but enter CWM recovery to flash the ROM
You can also look at My Android Solutions ( link below) to see anything similar
Check this out! Links to useful Guides and " Banned " Documentaries ​

shw-m110s stuck on recovery
sir i install cwm but not working stuck on recovery sir i try 1 file i downloaded to korean website this file size 782mb normal file size 300mb
bot not working .. i share picture to show u
sorry for bad english

Rigel.star said:
sir i install cwm but not working stuck on recovery sir i try 1 file i downloaded to korean website this file size 782mb normal file size 300mb
bot not working .. i share picture to show u
sorry for bad english
Click to expand...
Click to collapse
your screen shot is showing the stock 3e recovery ( means you had flashed a stock ROM), if you flash the CWM kernel and power down and use combo keys as written in first post you will get CWM recovery
it does not matter as long as the ROM you downloaded and flashed was for M190S . so here I am assuming you had not followed the flashing procedures as you must do the wipes and factory reset before and after flashing.
Please take your time to read and read the guide before flashing , its a step by step process, nothing must be skipped.
Check this out! Links to useful Guides and " Banned " Documentaries ​

[Q] i9505 won't start after changes to framework-res.apk [SOLVED]

Guys, I tried making some changes to framework-res.apk on my i9505, to change the background color...
but when I pressed to overwrite the original framework-res.apk to my modified one, the phone freezed and restarted, but now it wont start...
it's stuck on a screen where's written "SAMSUNG" and there's a glowing blue/purple behind it
is there anyway I can reach the root without turning the phone on again, so I can put the original framework-res.apk again?

Specht77 said:
Guys, I tried making some changes to framework-res.apk on my i9505, to change the background color...
but when I pressed to overwrite the original framework-res.apk to my modified one, the phone freezed and restarted, but now it wont start...
it's stuck on a screen where's written "SAMSUNG" and there's a glowing blue/purple behind it
is there anyway I can reach the root without turning the phone on again, so I can put the original framework-res.apk again?
Click to expand...
Click to collapse
If you have an SD card on your phone just remove it and put it on your Laptop/PC and make a flashable zip with a stock framework and and copy it to your sd card and flash the zip file via recovery. and that should fix your problem. If not then you need to reflash the rom in order to make it work

Repulsa said:
If you have an SD card on your phone just remove it and put it on your Laptop/PC and make a flashable zip with a stock framework and and copy it to your sd card and flash the zip file via recovery. and that should fix your problem. If not then you need to reflash the rom in order to make it work
Click to expand...
Click to collapse
That sounded a good and simple idea, but I think i'm doing something wrong, I tried doing like you said, making a flashable zip with the stock framework...
So I put my S4 on recovery mode, when to "update from external storage" (or something like that), and tried to flash the zip, some text showed up on the screen, I didn't had the time to write it all down, so I wrote only the red part:
E:footer is wrong
E:footer is wrong
E:signature verification failed
could it be that the apktool made some changes to the original apk while I was making a modified one?
edit: I tried flashing a new zip now, with the modified framework... and it got the same 3 errors messages, and still wont boot :/
I have a backup on the internal storage, of a version of the framework that i'm sure is not modified, is there anyway I can access it?

Specht77 said:
That sounded a good and simple idea, but I think i'm doing something wrong, I tried doing like you said, making a flashable zip with the stock framework...
So I put my S4 on recovery mode, when to "update from external storage" (or something like that), and tried to flash the zip, some text showed up on the screen, I didn't had the time to write it all down, so I wrote only the red part:
E:footer is wrong
E:footer is wrong
E:signature verification failed
could it be that the apktool made some changes to the original apk while I was making a modified one?
edit: I tried flashing a new zip now, with the modified framework... and it got the same 3 errors messages, and still wont boot :/
I have a backup on the internal storage, of a version of the framework that i'm sure is not modified, is there anyway I can access it?
Click to expand...
Click to collapse
Do you even have a custom recovery ? and What kind of custom recovery do you have?ie Philz/TWRP and Give me the original file and ill make a flashable zip for you

Repulsa said:
Do you even have a custom recovery ? and What kind of custom recovery do you have?ie Philz/TWRP and Give me the original file and ill make a flashable zip for you
Click to expand...
Click to collapse
I'm using the original recovery...
here's the original file: https://www.dropbox.com/s/ntij1ptio0tucz7/framework-res.apk
edit: tried doing it by "update from ADB", got the same 3 errors, but this time it didn't even went to the finish and restarted, it aborted and went back to the recovery screen

Specht77 said:
I'm using the original recovery...
here's the original file: https://www.dropbox.com/s/ntij1ptio0tucz7/framework-res.apk
Click to expand...
Click to collapse
Bro there's No way you can flash any zip file since your using a stock recovery... You need atleast a custom recovery such as Philz/TWRP. and flashing a recovery more likely will void your warranty. But if you dont care about warranty then flash a custom one but if you do care about that warranty then the only fix is to Flash a stock Rom , Its all up to you. Let me know.

Repulsa said:
Bro there's No way you can flash any zip file since your using a stock recovery... You need atleast a custom recovery such as Philz/TWRP. and flashing a custom recovery more likely will void your warranty. But if you dont care about warranty then flash a custom recovery but if you care about your warranty then the only fix is to Flash a stock Rom , Its all up to you. Let me know.
Click to expand...
Click to collapse
Damn... I don't want to void warranty... if I flash a stock rom, I'll loose everything on the internal storage?

Specht77 said:
Damn... I don't want to void warranty... if I flash a stock rom, I'll loose everything on the internal storage?
Click to expand...
Click to collapse
That is correct Im sorry mate , You can Either boot into recovery and Do Factory reset /wipe cache , Or Flash a stock rom. Or either check On How to restore a backup in Google.com You might save the backup on SD card.But im Not sure how does it work Since im using Google account to backup and restores my Stuff..
Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

Repulsa said:
That is correct Im sorry mate , You can Either boot into recovery and Do Factory reset /wipe cache , Or Flash a stock rom. Or either check On How to restore a backup in Google.com You might save the backup on SD card.But im Not sure how does it work Since im using Google account to backup and restores my Stuff..
Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
I noticed that even stuck on the samsung message, it at least is recognized @ the USB, so I tried doing "adb push framework-res.apk /system/framework", and just when I was getting happy, it said:
failed to copy 'framework-res.apk' to 'system/framework/framework-res.apk': Read-only file system
is there any command to "untick" the read-only via adb?
after searching on the internet, I found some people saying that you shoud type:
"adb shell
su"
and remount
but after I type su, any new command I type, wont work, it only repeat what I type...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sorry for the double post, but this is sad:
I installed CWM, and installed the zip with the original framework, and also tried with the modified framework...
but... it still get stuck at the same samsung logo

Sorry for the triple post, but since nobody is answering me, and the topic was almost at the second page, I had no other option...
I made a video of what's happening...
at the beggining, it show how the files are stored inside the flashable zip
then I show the zip being flashed with the CWM
then I show the device restarting (everytime I try to restart via CWM, flashing zip or not, it ask if it should fix root, what does it mean?)
and, the device getting stuck at the same SAMSUNG screen
https://www.youtube.com/watch?v=c-uJC9NZV8s
ok, finally I made it, I went to the "mount unmount" and mounted the system before flashing the zip, restarted, and it's working perfectly now

Specht77 said:
Sorry for the triple post, but since nobody is answering me, and the topic was almost at the second page, I had no other option...
I made a video of what's happening...
at the beggining, it show how the files are stored inside the flashable zip
then I show the zip being flashed with the CWM
then I show the device restarting (everytime I try to restart via CWM, flashing zip or not, it ask if it should fix root, what does it mean?)
and, the device getting stuck at the same SAMSUNG screen
https://www.youtube.com/watch?v=c-uJC9NZV8s
ok, finally I made it, I went to the "mount unmount" and mounted the system before flashing the zip, restarted, and it's working perfectly now
Click to expand...
Click to collapse
then I show the device restarting (everytime I try to restart via CWM, flashing zip or not, it ask if it should fix root, what does it mean?) When you press and hold Power+Volume up and You will see that Msg Recovery booting on top of your screen (Blue Letter)then Just let go both of your Finger's mate , and that should boot you into recovery and No need to Hold Menu anymore Just Power+VolUp and if it asked you to fix root /Recovery always Say NO to it But congrats tho