I am currently running mandana from 6.2 and gta 3 doesn't work it comes to a black screen after the intro. I've even overclocked my CPU to 1300mhz and it still goes to a black screen after the intro. any suggestions to make this work
Use apk version 1.0
now it works
lopman said:
Use apk version 1.0
Click to expand...
Click to collapse
I just searched the internet and found MarketMilitiaGTAv11.apk and just installed it over the older app and it works
aboobakr said:
I just searched the internet and found MarketMilitiaGTAv11.apk and just installed it over the older app and it works
Click to expand...
Click to collapse
Yes, version 1.1 was the one that added SGS compatibility (I don't know if it was officially or coincidently)
Lord_Santa said:
Yes, version 1.1 was the one that added SGS compatibility (I don't know if it was officially or coincidently)
Click to expand...
Click to collapse
with me that apk work fine , it was necessary re install
Related
Hello, Do anyone knows how to get SPB Shell 3D working on my samsung Galaxy Apollo.
If I open SPB Shel 3D with the home button, then I get a black screen.
They said, the app is available for android mobiles of 2.1 and higher.
I have an apollo with android 2.1
Do anyone else have the same problem as I?
Markie16 said:
Hello, Do anyone knows how to get SPB Shell 3D working on my samsung Galaxy Apollo.
They said, the app is available for android mobiles of 2.1 and higher.
I have an apollo with android 2.1
Do anyone else have the same problem as I?
Click to expand...
Click to collapse
I use it on my G3 with froyo
It lags just a bit and the text beneath some icons is scrambled
Let it load for some time
Uninstall and then reinstall
That worked for me
Do you have install SPB Shell 3D also today, or yesterday??
Of do you have an older version of SPB??
Hi,
Galaxy Apollo is not supported (cuz of WQVGA screen resolution). Please contact our support team to get a refund.
dont know about you but i got spb mobile shell 5.0 to work on my phone ... its very smooth... animations are great and all!!!
jazux said:
dont know about you but i got spb mobile shell 5.0 to work on my phone ... its very smooth... animations are great and all!!!
Click to expand...
Click to collapse
Hi can you please help us. I have indroid 3.0 galaxy apollo. I installed spb shell but its not working :-(
Sent from my GT-I5800 using XDA App
jazux said:
dont know about you but i got spb mobile shell 5.0 to work on my phone ... its very smooth... animations are great and all!!!
Click to expand...
Click to collapse
Is that SPB Shell 3D?? or an older version??
I had sent an email to SPB, because of that the app don't work on my Apollo.
They said: It's not about android 2.1, but you don't have the good hardware on your device.
I have seen this on youtube:http://www.youtube.com/watch?v=BAho1M3McqQ
Then I think that the person of SPB is not right with his anser.
??
I have G3 with 2.2, and it works fine.. Try reinstall??
vonuzu said:
I have G3 with 2.2, and it works fine.. Try reinstall??
Click to expand...
Click to collapse
How do you do that?
do you have a link of your download??
and then??
Is a Samsung galaxy 3 an other device as an Galaxy Apollo I5800??
I didnt do anything.. I'm on kirilios 3.0 and just installed the spb 3d and it worked.. I have a GT-I5800(Galaxy 3). And here is the link that i used> LINK
vonuzu said:
I didnt do anything.. I'm on kirilios 3.0 and just installed the spb 3d and it worked.. I have a GT-I5800(Galaxy 3). And here is the link that i used> LINK
Click to expand...
Click to collapse
How do you get Kirilios 3.0 on your GT I5800.
Is it not bad for your device??
For flashing your phone with any custom firmware (like kyrillios and more)go to development forum: http://forum.xda-developers.com/forumdisplay.php?f=868
And why bad? The custom firmwares are only for making the phones better with the stock you can't use live wallpapers, screenshot etc..
vonuzu said:
I didnt do anything.. I'm on kirilios 3.0 and just installed the spb 3d and it worked.. I have a GT-I5800(Galaxy 3). And here is the link that i used> LINK
Click to expand...
Click to collapse
Just force closes when I press the home button
Sent from my GT-I5801 using Tapatalk
HTC Hero
I tried installing this a couple times on my hero running AOSP 2.2.1 and it doesnt seem to work at all, it installs but then when i choose to go to SPB home instead of Launcher it just goes to a black screen then reverts back to whichever screen i was using before
I use i5801 whit froyo jpf and I install spb 3d but I can't use this launcher. Please can anyone help me?
Sent from my GT-I5800
I can't even install it on my i5801^^
Working great on my I5801 with kyrillos' v3.0 .. It gave me an error regarding the market purchase but after I installed droidwall its working awesomely
Can't get it to work on my apollo, it seems to start, with a black screen for one minute or so, and than it gives the launcher picker again....
It has worked, I downloaded the file in the post but the texts are scrambled, so I stay with tw^^
Pauri said:
It has worked, I downloaded the file in the post but the texts are scrambled, so I stay with tw^^
Click to expand...
Click to collapse
Do you have the Apollo (I5800)??
with android 2.1??
Wich file in the post, do you have a link for me??
What dit you do to install SPB??
Look this:http://www.youtube.com/watch?v=IMO6J2xA2iY
Hey,
Does anyone have the port of Cordy on Samsung Galaxy 3 Apollo?
For the ones who don't know: https://market.android.com/details?id=com.silvertree.cordy&feature=search_result
It doesnt work on our phone, you just need to login to the market to see if it compatible or not.
fallensoldier said:
It doesnt work on our phone, you just need to login to the market to see if it compatible or not.
Click to expand...
Click to collapse
That's why it's need to be ported!
[GAME] Cordy 1.3 ARMv6
Version 1.3 working on ARMv6 (I try and very laggy but You can try on different drivers or something).
Description on Android Market
Download (4shared).
Eselter said:
Version 1.3 working on ARMv6 (I try and very laggy but You can try on different drivers or something).
Description on Android Market
Download (4shared).
Click to expand...
Click to collapse
The link at 4shared takes forever to download. Any other alternate links? torrents?
Ok first I tried this version of cyanogenmod
http://download.cyanogenmod.com/?type=stable&device=encore
On this one N64 games worked but youtube didn't. So I tried this version here
http://download.cyanogenmod.com/?device=encore
I think it was the 177 version. Anyway youtube worked but N64 games didn't. Is there anyway to get both working?
With the newest kernel implemented in the latest nightlies and RC N64 is incompatible and won't run, unless you use versions lower than 2.0 of N64oid (the only game that runs well in those versions is Mario 64). There's people that have tried to comunicate with the developer of the emulator to see if he can work something out, but he doesn't own a NC so it's hard to troubleshoot. We all want N64 and we will need to wait it seems
Bryon15 said:
Ok first I tried this version of cyanogenmod
http://download.cyanogenmod.com/?type=stable&device=encore
On this one N64 games worked but youtube didn't. So I tried this version here
http://download.cyanogenmod.com/?device=encore
I think it was the 177 version. Anyway youtube worked but N64 games didn't. Is there anyway to get both working?
Click to expand...
Click to collapse
You mean what I am doing right now?
Go download this version of CM7, "CyanogenMod-7.0.0-RC4-encore"
I am able to use Youtube and N64oid 2.3 using this setup.
The problem with N64oid with the newer CM7 releases has to do with an incompatibility with the newest Kernel.
Larry94 said:
You mean what I am doing right now?
Go download this version of CM7, "CyanogenMod-7.0.0-RC4-encore"
I am able to use Youtube and N64oid 2.3 using this setup.
The problem with N64oid with the newer CM7 releases has to do with an incompatibility with the newest Kernel.
Click to expand...
Click to collapse
I just saw this today. I tried looking for CyanogenMod-7.0.0-RC4-encore but can't find it. Where did you download yours from?
Bryon15 said:
I just saw this today. I tried looking for CyanogenMod-7.0.0-RC4-encore but can't find it. Where did you download yours from?
Click to expand...
Click to collapse
N64oid works with the 7.0.3 stable.
---------------------------------
Sent from my LG Optimus V using Tapatalk
koopakid08 said:
N64oid works with the 7.0.3 stable.
---------------------------------
Sent from my LG Optimus V using Tapatalk
Click to expand...
Click to collapse
That's the one I tried first. I mentioned it in my opening post. N64 worked on it but youtube didn't.
Bryon15 said:
That's the one I tried first. I mentioned it in my opening post. N64 worked on it but youtube didn't.
Click to expand...
Click to collapse
You need to use an older Youtube version or just disable HD in the top right.
---------------------------------
Sent from my LG Optimus V using Tapatalk
hello every one
could some one tell us which android version could run NFS SHIFT ???
i tested NexusHD2 ICS CM9 with tytung's kernel and the graphics was very bad (all white colores designes) but the game runs normally
same thing with NexusHD2 gingerbread
ThanX
specter16 said:
hello every one
could some one tell us which android version could run NFS SHIFT ???
i tested NexusHD2 ICS CM9 with tytung's kernel and the graphics was very bad (all white colores designes) but the game runs normally
same thing with NexusHD2 gingerbread
ThanX
Click to expand...
Click to collapse
Just played it on NexusHD2 and it ran just as well as it did on GB (TyphooN). Graphics were exactly the same as they were and it was a little bit smoother than GB as well. However, this was a restored app from GB so if you downloaded it fresh then that may cause some differences. I also don't know whether this is the latest version or not (let's just say that I didn't get it off of the Play Store directly ).
Nigeldg said:
Just played it on NexusHD2 and it ran just as well as it did on GB (TyphooN). Graphics were exactly the same as they were and it was a little bit smoother than GB as well. However, this was a restored app from GB so if you downloaded it fresh then that may cause some differences. I also don't know whether this is the latest version or not (let's just say that I didn't get it off of the Play Store directly ).
Click to expand...
Click to collapse
I downloaded it from torrent and installed it normally all was fine
i even instaled it after a fresh ROM install ( the first apk installed after the ROM's first boot )
!!!!!
specter16 said:
I downloaded it from torrent and installed it normally all was fine
i even instaled it after a fresh ROM install ( the first apk installed after the ROM's first boot )
!!!!!
Click to expand...
Click to collapse
Really? That's odd, it works fine for me. I am, however experiencing the same issue with Flick Kick Football where everything is white and stuff. Dunno why though, sorry
Nigeldg said:
Really? That's odd, it works fine for me. I am, however experiencing the same issue with Flick Kick Football where everything is white and stuff. Dunno why though, sorry
Click to expand...
Click to collapse
Now tried on Team Blue Droid V3.7 Sensation XL Gen3
the same thing
By the way, can you advice me which ROM is the best for gaming ? (i know it will never be a sense rom )
thanX
Edit:
even onTyphoN's CM7 ROM it won't work
i'll try an other apk then i'll see what it gives
http://forum.xda-developers.com/showthread.php?t=933951
I think its more about the version of the game that works well with hd2 than about the rom. Do you download the cache for the game as well? it should also match your device
The white graphics issue would be caused by the app using diiferent opengl files (plugins/shaders). Try using Chainfire3D (searching xda for plugins) and change to a different one when you want to use the app.
And fyi, I pulled the NFS shift app from my tablet, and had the white graphics, used Chainfire to use the tegra plugin and it's working fine.
hello i have minix x5. i controlled it with rk remote app with a samsung s advance with gingerbread. non i have upgarded on jelly bean and smartphone is rooted. now the app cant find any devices.. while with another gingerbread based phone it works. there is a solution? thanks
I had a similar problem but I got my phone working with the Droidmote app.
It's working just fine for me on my Galaxy S3 (4.1.1 rooted) and my X5. Have you tried either wiping the app data or simply uninstalling/reinstalling RKRemote from the app store after upgrading to JB?
Artimis said:
It's working just fine for me on my Galaxy S3 (4.1.1 rooted) and my X5. Have you tried either wiping the app data or simply uninstalling/reinstalling RKRemote from the app store after upgrading to JB?
Click to expand...
Click to collapse
i have it on my mk808 finless 1.7c it didnt seem to work so im gonna try updating both devices apps and see if it helps
EDIT its not on the play store?
chismay said:
i have it on my mk808 finless 1.7c it didnt seem to work so im gonna try updating both devices apps and see if it helps
EDIT its not on the play store?
Click to expand...
Click to collapse
try this one https://www.google.com/url?sa=t&rct...=ZGMFCOVK1gfL_ZS-sP6D0A&bvm=bv.46471029,d.eWU
yup that ones not working for me
It's an old thread, but not sure if you want to try a newer version 2.0.2: http://blog.geekbuying.com/index.ph...-rockchip-base-android-tv-stick/#.Uh0MAhv6M8R
Installed the latest version and it can't see my MK908 rev3 with stock rom.
Only testing with my Desire (4.2.2 rom) as my Sensation is down for the moment.
mk809 ii remote on tegra
Anyone has any idea why I can control my 809 ii from my mtk device and not from my tegra? both connected to wifi and both with same version of remote control app.
My working version is 2.0
I tried the newest version I could find (2.0.2) posted on this thread. It looks better than the one I have but it doesn't work on both my platforms.
try this version it worked for me
PiccoTripex said:
Anyone has any idea why I can control my 809 ii from my mtk device and not from my tegra? both connected to wifi and both with same version of remote control app.
My working version is 2.0
I tried the newest version I could find (2.0.2) posted on this thread. It looks better than the one I have but it doesn't work on both my platforms.
Click to expand...
Click to collapse
try this version it worked for me
xtreamcold said:
try this version it worked for me
Click to expand...
Click to collapse
This one works for me with the rk30sdk.
THX!
Official Remote Control app
Make sure you download the official remote control app from here:
http://minixforums.com/threads/official-android-phone-tablet-remote-control-app.53/
The latest version is currently 2.0.3.
It works with my Minix Neo X5 running the latest Android 4.2.2 firmware. Please note that you need to have the eHomeMediaCentre service running in the X5 for the remote control app to be able to see the X5. In the eHomeMediaCentre app, you can set it to run at start-up so you don't need to run app everytime after booting.
aidfarh said:
Make sure you download the official remote control app from here:
http://minixforums.com/threads/official-android-phone-tablet-remote-control-app.53/
The latest version is currently 2.0.3.
It works with my Minix Neo X5 running the latest Android 4.2.2 firmware. Please note that you need to have the eHomeMediaCentre service running in the X5 for the remote control app to be able to see the X5. In the eHomeMediaCentre app, you can set it to run at start-up so you don't need to run app everytime after booting.
Click to expand...
Click to collapse
This one worked for me on my MK908ii that I just received with my Galaxy Tab 10.0 Original
xtreamcold said:
try this version it worked for me
Click to expand...
Click to collapse
Thanks. This one detects my stick, but causes it to reboot on connect.
---------- Post added at 11:03 PM ---------- Previous post was at 10:55 PM ----------
aidfarh said:
Make sure you download the official remote control app from here:
http://minixforums.com/threads/official-android-phone-tablet-remote-control-app.53/
The latest version is currently 2.0.3.
It works with my Minix Neo X5 running the latest Android 4.2.2 firmware. Please note that you need to have the eHomeMediaCentre service running in the X5 for the remote control app to be able to see the X5. In the eHomeMediaCentre app, you can set it to run at start-up so you don't need to run app everytime after booting.
Click to expand...
Click to collapse
Did not work for me on 4.2.2. Can you check what version of eHomeMediaCenter you have? My 2.0.27 version does not have the startup option.
RKRemote 2.0.2 and 2.0.3 do not detect the stick. It worked the very first time only.