Related
Here are the .IMG files that Motorola has posted on their MOTODEV site. .
ATTENTION: DO NOT ATTEMPT TO FLASH THIS FILE ON ANYTHING BUT THE VERIZON WIRELESS MOTOROLA XOOM Z600 (3G MODEL) OR YOU WILL HAVE A SHINEY PAPER WEIGHT!!!!
These files are from Motorola's Development site but I take no liability with anything that happens with your device if something goes wrong.
Official HRI39 Motorola .IMG files:
http://www.multiupload.com/9XP1B8LSWC
Official HRI66 Motorola .IMG files:
http://www.multiupload.com/POUDJY1255
The following are the steps from the MOTODEV site
1. Extract files into android sdk /tools folder.
2. Start command prompt/ terminal from the android sdk tools folder. (How this is done on Mac I do not know, Windows: shift+left click and select "open command window here")
3. adb reboot bootloader
4. fastboot flash boot boot.img
5. fastboot flash system system.img
6. fastboot flash recovery recovery.img
7. fastboot flash userdata userdata.img
8. fastboot erase cache
9. fastboot oem lock
The device will lock and reboot.
You are now back to out of box state. However I do not know if it is still detectable by VZ Moto if you have unlocked the device after doing this.
Also fyi the sbf file is still an option but you will have to go in and do the fastboot oem lock after it completes
u mispelled cache
Fixed. Thanks had a long day and missed that at proof reading
Thanks for the files, does seem a lot simpler to just use the sbf file though.
bwcorvus said:
Thanks for the files, does seem a lot simpler to just use the sbf file though.
Click to expand...
Click to collapse
Its always good to have more options and the Xoom gives us many and hopefully soon sdcard support will provide the final key piece, the CM recovery!
In the meantime it is very good to have all of the official files at our disposal.
If anyone is wondering what the the reflash file from the first leak is, it is an SBF format installation of the stock boot image and a blank user data image to wipe data and return to stock via RSD Lite without touching the system partition.
This provides yet another way to reset that should be examined, especially if it works over a modified system partition.
We also may be able to use any or all of these files to build our own SBF files and other one step solutions for recovering and or modifying the Xoom. This can be very valuable and must also be thoroughly explored along with the NVM so we can really start to tak better control of the radio functions.
Lots to look at...
I am in love with fastboot. I am so use to the days of the OG Droid where the bootloader wasnt locked but you didnt have fastboot as an option. I can see a lot of easier days in the Dev community coming.
jmc2543 said:
I am in love with fastboot. I am so use to the days of the OG Droid where the bootloader wasnt locked but you didnt have fastboot as an option. I can see a lot of easier days in the Dev community coming.
Click to expand...
Click to collapse
Yea having these images is one BIG step...now we just need sdcards
Just finished doing this. I'm back at stock. Of course no I'll b the last to get an update. And by the same time tomorrow I'll be unlocking and re-rooting.
by doing this does it erase everything on your xoom?
bishop72 said:
by doing this does it erase everything on your xoom?
Click to expand...
Click to collapse
Yes it would. Itll bring it back to what it was like when you first bought it.
For those that updated, were you able to reroot?
17akota said:
Yes it would. Itll bring it back to what it was like when you first bought it.
Click to expand...
Click to collapse
I saw multiple threads about Titanium backup not working with the Xoom. Are there alternative apps that will save all my configuration like home screen layout etc? It was a lot of work B-)
Sent from my Xoom using Tapatalk
It is just Android 3.0
3.0.1 is HRI66
Do I need to do this if I have rooted, just unlocked? Can I just "fastboot oem lock" and be good to go?
Aaron636r said:
Do I need to do this if I have rooted, just unlocked? Can I just "fastboot oem lock" and be good to go?
Click to expand...
Click to collapse
Oh no. I did the "fastboot oem lock" and now I get "Failed image LNX 0x0002". Cant boot past Dual Core logo screen.
Ok, re-unlocking it fixed it.
Ok so we have the original flash so we can get the OTA thats great. And Moto confirmed on their forum they will upgrade devices that have been unlocked and rooted. If they cannot install the software they will ship it back with just the new hardware. Can't wait to see what people can really start doing now.
For those of you that are like me and hate having to using mega upload and crap to download things here is a direct link on my web server to the file released by Moto.
DMCA Noticed by Moto
This was taken directly from the Moto Dev site myself.
If you browse the directory, which I think I left on for this one... There is also the sbf archive and RSD there to download. If anyone needs a place to store some files let me know. I have unlimited storage and bandwidth. When some of the OG Droid releases came out I was pumping over 11GB a week in downloads with no issues. It's the least I can do to help the community.
I got to be honest I don't know what the hell i should do to get the update and what will cause me to either have a clean install or lose root
All reports so far indicate it will not break root and rooted users have been getting the notification. They are also probably doing a controlled rollout if you have not yet gotten the notification. My XOOM is at home right now which sucks I won't be able to get my hands on it for about 6 hours and see what I can all do.
I've got a new A500 and I intend to root it soon, but I would like advice on whether to take the current update 7.014.1 being pushed before I go through the rooting process? It currently shows having 3.2 OS version.
Zoandroid said:
I've got a new A500 and I intend to root it soon, but I would like advice on whether to take the current update 7.014.1 being pushed before I go through the rooting process? It currently shows having 3.2 OS version.
Click to expand...
Click to collapse
Doesn't matter, the only way to root it is by flashing it which wipes it totally clean
timmyDean said:
Doesn't matter, the only way to root it is by flashing it which wipes it totally clean
Click to expand...
Click to collapse
My concern, being still in the middle of researching just how to root the A500, was whether the update would have a similar effect as, for example, the more major update from 3.0 to 3.2, which, as I understand it totally changes the procedure used to achieve root. But if it won't matter one way or the other, I might as well take the update in the interim. I keep hoping to see a more simple 'one-click' style of root made available before I tackle this task. So far I've found something like 3 different ways to root the tablet between this forum and another. But each is a rather involved process.
Thanks!
timmyDean said:
Doesn't matter, the only way to root it is by flashing it which wipes it totally clean
Click to expand...
Click to collapse
I downgraded, rooted, and then flashed the stock ROM without wiping. If going to any other rom, you might need to wipe.
There currently is no way to root a stock 3.2 or later tablet with a simple one click. In the past GingerBreak gave us that ability but since has been plugged. The other thing causing issues is ACER locked the boot loader making it difficult to flash in a new boot image to get to root.
=== 411 on rooting ===
So, if you have a tablet and want to root it then you have to start looking at security holes. This is what the GingerBreak exploit did along with others. But, ACER plugged those holes and as of today, nobody has found anymore.
So, you might look at exploiting an update.zip. These are OTA's that run but they are signed by ACER. So you can take it apart (unzip) and modify it, but you cannot resign it with an ACER Key. Therefore, you have to sign it with your key. Since it is NOT signed by ACER, the ACER recovery will not install it. So, you have to replace the ACER recovery with CWM which will install any update.zip regardless of who signed it. You just need to change the built in recovery by flashing in CWM recovery.
Lastly, you can just change the boot image and add root. This is easy and straight forward to do. This is just like making your own custom update.zip. Once you have your custom boot, you can then just use Nvflash to flash in your custom boot.
Now, fast forward. ACER (can someone please explain to me why?) decided to lock the bootloader thereby not allowing you to replace the recovery, boot, or any other area. Meaning, you cannot use Nvflash anymore without a key.
With the bootloader locked, you can only load new images if you know the key used to lock it. Of course, they use a public and private key combination, and they appear to use the serial number of the USB device as part of the public key making the keys on my tablet unique compared to yours.
With all this said, this ends all the easy simple rooting methods because first, they've plugged all the security holes (which they should do). Secondly, they locked the boot loader making it very difficult for people to just flash in a rooted boot image.
Armed with this, how do you root a 3.2? One way to do it is to get to a version prior to 3.2 loaded that has a security hole or does not have the bootloader locked. You now exploit it and get root. Now, with root access you make a 'backdoor' that only you know about which allows you to get into your tablet as root. With this done, now roll your tablet forward apply all updates. Since you have a 'backdoor' you can always gain root access.
Unfortunately, this gets to be messy or can be more difficult to do than just clicking on a GingerBreak application. However, if you follow the steps posted here in the forum, it's straight forward and easy enough to do. If not, you are going to have to wait for someone to find a hole and build a oneclick application. I wouldn't hold my breath on this, it probably will never happen because everyone is working on ICS.
Lastly, everyone should write to ACER, refuse to buy ACER (or any tablet) that doesn't allow you (AS THE OWNER) to change it. How would you like to buy a Ford to just have Ford lock the lug nuts on the rims so you could NOT put on your custom wheels.
I believe failure to allow owners to unlock these devices will be the downfall to Android. Windows 8 does NOT have such restrictions and businesses are not going to use devices that are locked and cannot be customized for business. Because developers write software they can sell, they'll move to Windows 8 and drop supporting Android and all these goofy flavors and restrictions. Android might be great and everyone hates Microsoft, but software vendors are going to NOT want to support all these devices.
my 2¢
timmyDean said:
There currently is no way to root a stock 3.2 or later tablet with a simple one click. In the past GingerBreak gave us that ability but since has been plugged. The other thing causing issues is ACER locked the boot loader making it difficult to flash in a new boot image to get to root.
=== 411 on rooting ===
So, if you have a tablet and want to root it then you have to start looking at security holes. This is what the GingerBreak exploit did along with others. But, ACER plugged those holes and as of today, nobody has found anymore.
So, you might look at exploiting an update.zip. These are OTA's that run but they are signed by ACER. So you can take it apart (unzip) and modify it, but you cannot resign it with an ACER Key. Therefore, you have to sign it with your key. Since it is NOT signed by ACER, the ACER recovery will not install it. So, you have to replace the ACER recovery with CWM which will install any update.zip regardless of who signed it. You just need to change the built in recovery by flashing in CWM recovery.
Lastly, you can just change the boot image and add root. This is easy and straight forward to do. This is just like making your own custom update.zip. Once you have your custom boot, you can then just use Nvflash to flash in your custom boot.
Now, fast forward. ACER (can someone please explain to me why?) decided to lock the bootloader thereby not allowing you to replace the recovery, boot, or any other area. Meaning, you cannot use Nvflash anymore without a key.
With the bootloader locked, you can only load new images if you know the key used to lock it. Of course, they use a public and private key combination, and they appear to use the serial number of the USB device as part of the public key making the keys on my tablet unique compared to yours.
With all this said, this ends all the easy simple rooting methods because first, they've plugged all the security holes (which they should do). Secondly, they locked the boot loader making it very difficult for people to just flash in a rooted boot image.
Armed with this, how do you root a 3.2? One way to do it is to get to a version prior to 3.2 loaded that has a security hole or does not have the bootloader locked. You now exploit it and get root. Now, with root access you make a 'backdoor' that only you know about which allows you to get into your tablet as root. With this done, now roll your tablet forward apply all updates. Since you have a 'backdoor' you can always gain root access.
Unfortunately, this gets to be messy or can be more difficult to do than just clicking on a GingerBreak application. However, if you follow the steps posted here in the forum, it's straight forward and easy enough to do. If not, you are going to have to wait for someone to find a hole and build a oneclick application. I wouldn't hold my breath on this, it probably will never happen because everyone is working on ICS.
Lastly, everyone should write to ACER, refuse to buy ACER (or any tablet) that doesn't allow you (AS THE OWNER) to change it. How would you like to buy a Ford to just have Ford lock the lug nuts on the rims so you could NOT put on your custom wheels.
I believe failure to allow owners to unlock these devices will be the downfall to Android. Windows 8 does NOT have such restrictions and businesses are not going to use devices that are locked and cannot be customized for business. Because developers write software they can sell, they'll move to Windows 8 and drop supporting Android and all these goofy flavors and restrictions. Android might be great and everyone hates Microsoft, but software vendors are going to NOT want to support all these devices.
my 2¢
Click to expand...
Click to collapse
Hi, and thank you VERY much for posting such a nice explanation, especially in addition to all the work you have done posting your thread rooting 3.2. I understand, and completely agree with your explanation, as well as your position on taking control of what we bought and paid for. I take even stronger offense with this tablet's bootloader being locked than I do on my phones. This is not a discounted phone with a service plan tied to a cell provider. It has WiFi, but " I " am the only one providing its data (it never leaves my home). There is no justification here that I am 'leasing' a provider's technology . It was a gift, so I can't speak to choosing the vendor. But I like your wheel lug analogy.
I've been reading the threads on rooting, and both my Android phones are rooted and ROMed, so I've been around the block a couple times from the rooting aspect. But thus far I have been rather confused as to which route to take with the tablet. I don't want to be limited to using terminal for su access, so I want to 'fully root' the tablet. My goal is to allow apps like Titanium Backup, Root Explorer, and others I use on the phones, as well as having Clockworkmod Recovery, or similar recovery capable of working with nandroid backups. But for now I don't have plans to use a custom ROM. So having rooted stock 3.2 would suffice.
Although I do fully understand the need to research these kinds of things before jumping in, I also know that often times information evolves, and lengthy threads which were once considered current info end up not getting updated during that evolution. This can lead to wasted time reading information which can no longer actually be used . So in the spirit of pursuing the most current info, could you recommend which thread I can use to get the best results while rooting this 3.2.1 OS Tablet with the above goals in mind?
Used Timmydean's method, it is pretty easy as long as you follow his instructions with in the zip file he has made with all the tools you need inside of hat zip file. You root, install super user and busybox then download Acer recover installer and that will install cwm...
http://forum.xda-developers.com/showpost.php?p=20654298&postcount=129
Good luck and thanks again timmydean for this method.
Sent from my A500 using xda premium
Thanks, that sounds like the way to go. I'll head over to the link you provided.
I've got a couple of questions about the zip file at that post. I want to download that to my PC, and will be using ADB from there, right? I have the choice of doing so from either Windows XP SP3, or Windows 7 Home Premium. I read in older threads that many of the problems people had were only when they used XP, but were avoided by using Windows 7 (which was exactly opposite of what people experienced rooting the LG Ally), so it seems that in this case it is desirable to use Win7?
I presume I'll need to install a driver so the PC can 'see' the tablet. Is one provided in the tools, or do I need to download that somewhere?
I used windows 7. Yes the driver is in the zip file. I unzipped the file to a folder on my desktop and went from there.
In the zip there is a folder called usbpcdriver. Run the set up from within the fooder to get your driver... please read the instructions that say read me..
Sent from my A500 using xda premium
Thanks. I intend to read everything I can get my hands on before I actually start this. I definitely don't want any trouble or, heaven forbid, to brick the tablet.
pretty easy i think... good luck and let us know when you get rooted
I'm not finding any actual instructions on the steps to take for this procedure. The readme file in version 3 zip file only talks about "changes" from whatever the original procedure was.
Where can I get the actual instructions for the entire procedure?
Edit: I just downloaded version 2 of the zip file. In that one there is an additional PDF called "Steps". It is a little more detailed, and says at step 20 that "you should now have 3.2 with a SU shell installed". Does the DotNetDetector step actually ROOT the device? That seems simple enough, but it still has no mention of things like installing ADB and the PC driver. I located the actual thread from which the single post was derived (the target of the URL above, where it is suggested I use TimmyDean's procedure). I am now looking through that entire thread to try to sort out where the instructions are.
AHA! Post 119 of that main thread says "Also the instructions and everything you need are in earlier posts.".
It appears this procedure needs an instruction manual written to consolidate all the gathered information. Having a link to only the download zip files isn't telling me the whole picture. I'll try gleaning the thread and see if I can put together all the steps needed from start to finish to make this work. Looks like ROOT ain't happening tonight.
http://www.multiupload.com/SLR6XSV841
---------- Post added at 05:14 AM ---------- Previous post was at 05:11 AM ----------
thats the link to read me file.. I about to jail break an Iphone 4... Wish me luck
I edited the above post while you were replying. I'll check out that link, thanks.
Good luck on jailbreaking the DemonSpawn 4.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
he has updated it again. looks like a few steps where taken out to make it more simpler
good luck man. Iphone is jail broken
OK, so it looks like the file you just sent me a link to is the same one as the "Steps.PDF" file that was released in Version 2. It appears to me that what I need to do is blend the changes (detailed in version 3's readme file) into that original Steps file, to make a single contiguous set of instructions, and then start at the top. I notice it does mention installing the PC driver and ADB.
Do I have this right so far?
rdnkchevy said:
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
he has updated it again. looks like a few steps where taken out to make it more simpler
good luck man. Iphone is jail broken
Click to expand...
Click to collapse
That was fast! Wanna do my tablet?
The link you sent just now is to the version 3 zip file posted on 12/25, which is what I had initially downloaded. It does appear he streamlined the procedure, but it is that readme file which leaves out the part about installing the PC driver and ADB in the beginning, and also leaves out the part at the end telling you that you should now have 3.2 with a SU shell installed.
Please understand that I want to be "fully" rooted, not just have the ability to gain an SU prompt in terminal. Will this procedure "fully root" the tablet? I'm confused by what he means saying "SU shell installed".
Yes if you use his v3 file you will be.. you will need to down load acer recovery from the market after you are rooted and then flash clockworkmod.. this should all take you about 30 min if that...
rdnkchevy said:
Yes if you use his v3 file you will be.. you will need to down load acer recovery from the market after you are rooted and then flash clockworkmod.. this should all take you about 30 min if that...
Click to expand...
Click to collapse
OK, thanks!! Rooting went well without incident. I just installed Root Explorer and Titanium Backup, and made a backup to SD of my apps and data. Then installed Acer Recovery Installer, and let it install CWM Recovery. But what is considered the "home" button on the tablet?? Is it the reset button? The only buttons on this thing are the Volume rocker and the Power button. ( I got brave and found out it is the POWER button ).
Edit: To clarify, I meant to ask which button serves as the Home button while you are IN the CWM Recovery environment, not while in the Android OS home screen.
Hey everyone,
I'm having trouble getting my Nexus 7 to update to 4.2.2. My device is rooted, I recently performed a factory reset.
The update has never appeared in my "System updates" menu, so I looked around and saw that if you force stop "Google Services Framework" and clear its data, the update will appear in "System updates."
It did, but when it finishes downloading, it says "Verification failed."
I tried another factory reset, and I had to again force stop and clear data on "Google Services Framework" to get the update to appear, but again it downloads and say "Verification failed."
I'm stumped now. Do I have to unroot and reroot? Do I have to keep waiting for this update? Do anything with the bootloader? (I really hope not...)
Thanks everyone!
If some files in your system got changed for whatever reason, then you wont be able to update. You can flash the 4.2.1 stock rom and try ota update again.
Leonhan said:
If some files in your system got changed for whatever reason, then you wont be able to update. You can flash the 4.2.1 stock rom and try ota update again.
Click to expand...
Click to collapse
Is flashing the stock 4.2.1 rom the same thing as doing a factory reset to 4.2.1?
If it isn't, would flashing the 4.2.1 rom wipe my tablet?
Leonhan said:
If some files in your system got changed for whatever reason, then you wont be able to update. You can flash the 4.2.1 stock rom and try ota update again.
Click to expand...
Click to collapse
If he is trying to do an OTA to 4.2.2, would it not be more straightforward to just flash the 4.2.2 factory image? The OP has already done a factory reset, so it doesn't look like he/she is particularly attached to his current setup.
Also - the language he used was vague - it sort of sounded like the OP observed "verification failed" in the main OS rather than in the recovery. Not sure.
But it doesn't matter - newbs should not be trying to use OTAs on modified /system images or tabs with altered boot images. It's just too detailed a process to describe compactly.
@Horadrius
Before you do anything further, you should back up everything on the "SD Card" to your PC. Yes, all of it. You can throw it away later if you find you didn't need it. But if you follow the instructions for the Google (factory) images install, everything gets wiped off of /data including your pseudo - SD card.
At a minimum, that will allow you to follow the SBS instructions for installing the 4.2.2 factory images, or - you can simply install a 4.2.2 Stock ROM from over in the dev forum.
Whatever you do, start getting in the habit of making backups - and at least occasionally also getting copies of those off of the tablet.
Oh boy, lot of information to digest here....and a lot of questions
it sort of sounded like the OP observed "verification failed" in the main OS rather than in the recovery. Not sure.
Click to expand...
Click to collapse
Yes, it was the main OS - Settings -> About Tablet -> System Update.
After force stopping Google Services Framework, the update showed up there, and when the download bar reached 100%, it said "verification failed." I did a factory reset, and now when I go to System Update it simply says that my system is up to date.
This makes me think I'm not "supposed" to have the update yet, and that it will arrive, eventually. Yes?
newbs should not be trying to use OTAs on modified /system images or tabs with altered boot images.
Click to expand...
Click to collapse
So, no updating the device from System Menu because I'm rooted/unlocked bootloader? I'll have to flash everything as it comes out?
@Horadrius
Before you do anything further, you should back up everything on the "SD Card" to your PC.
Click to expand...
Click to collapse
Would Titanium Backup held in this regard? Or simply copy/paste the sdcard folder to my PC?
This whole process has been very frustrating. Is this the price you pay for rooting your device? Making simple system updates into a maze?
Horadrius said:
Oh boy, lot of information to digest here....and a lot of questions
Yes, it was the main OS - Settings -> About Tablet -> System Update.
After force stopping Google Services Framework, the update showed up there, and when the download bar reached 100%, it said "verification failed." I did a factory reset, and now when I go to System Update it simply says that my system is up to date.
This makes me think I'm not "supposed" to have the update yet, and that it will arrive, eventually. Yes?
So, no updating the device from System Menu because I'm rooted/unlocked bootloader? I'll have to flash everything as it comes out?
Would Titanium Backup held in this regard? Or simply copy/paste the sdcard folder to my PC?
This whole process has been very frustrating. Is this the price you pay for rooting your device? Making simple system updates into a maze?
Click to expand...
Click to collapse
Sounds like your download is bad if it fails at this stage. I believe it is saying the checksum of the download file doesn't match whatever is downloaded.
PS. not related to N7, why XDA use the re-captcha which I need to refresh several times to get something I can read
Horadrius said:
Yes, it was the main OS - Settings -> About Tablet -> System Update.
After force stopping Google Services Framework, the update showed up there, and when the download bar reached 100%, it said "verification failed." I did a factory reset, and now when I go to System Update it simply says that my system is up to date.
This makes me think I'm not "supposed" to have the update yet, and that it will arrive, eventually. Yes?
Click to expand...
Click to collapse
No. It means that for some strange reason, running a checksum program on the downloaded OTA file failed to produce the expected checksum. The most likely way this can happen is that the file is truncated - the download stopped short of the full file. Don't know why this is happening, but there you go. There could be other failure causes that are more rare, but it doesn't mean you are not "supposed" to have the OTA. It means that the download process is failing.
The *stock* recovery does a number of even more sophisticated checking than this; but it appears from your description that the recovery never even gets booted.
Horadrius said:
So, no updating the device from System Menu because I'm rooted/unlocked bootloader?
Click to expand...
Click to collapse
Yes and No. An unlocked bootloader causes no problems at all. ANY of the following CAN or WILL cause problems:
- attempting to run an OTA with a custom recovery installed instead of the stock recovery.
- having a modified boot partition (e.g. non-stock kernel, or slightly modified boot partition)
- having altered (or removed!) files in the /system partition that are targeted for patching.
- permissions changes performed by the installer script can cause root functionality to disappear
Horadrius said:
I'll have to flash everything as it comes out?
Click to expand...
Click to collapse
Not sure what you are asking here, but the basic answer is that if you stay on stock you can certainly apply OTAs easily. If you start altering things, you might or might not be able to apply an OTA; there are simply no guarantees.
[size=+1]OTAs are meant for stock installations - including a stock recovery. PERIOD. While it is possible that an OTA could succeed, it is unreasonable to have the expectation that it will do so.[/size]
Horadrius said:
Would Titanium Backup held in this regard? Or simply copy/paste the sdcard folder to my PC?
Click to expand...
Click to collapse
I presume you are talking about the future here, as you said that you already did a factory reset at least twice. If you have subsequently added stuff back in, then I suppose you might be talking about the present tense.
But, yes - either TiBu or the Carbon app can be used along with a strategy where you simply back up the apps & data you are interested in, (plus any "flashable zips" that you used to customize your device in the first place), and you simply start from scratch with a factory install followed by re-rooting, and then restore your apps & data (using TiBu or Carbon).
One other thing you can do which is EASY is this: simply wait until a developer/ROM cook publishes a "Stock" flashable ROM based on the release that the OTA is upgrading to. Don't worry about the OTA, just wait a little bit. (These ROMs are already out for the WiFi-only model, BTW).
1) Take a backup as the first thing you do. It's easy and gives you some insurance.
2) Don't wipe (no "factory reset") - just install the Stock ROM over the top of your existing ROM.
that's it. If you were using a custom kernel, re-install it.
Horadrius said:
This whole process has been very frustrating. Is this the price you pay for rooting your device? Making simple system updates into a maze?
Click to expand...
Click to collapse
[size=+1]OTAs are meant for stock installations - including a stock recovery. PERIOD.[/size]
Interpret that as you desire. It is unreasonable for you to expect that you can diddle with your phone any way you please, and a patch install upgrade methodology will be robust in the faces of arbitrary changes on your part. You are the person creating the maze, not Google.
Moreover, it is your choice to take an upgrade - it's not mandatory. My guess is your tablet was quite pleasing to you before any OTAs started rolling out. Nobody is forcing you to do anything.
OK, one last thing. It is still possible that a manual OTA can succeed on your phone if it is lightly rooted - but there are no guarantees. The procedure does not require you to wait around until an OTA arrives on your phone, but it is not for the faint-hearted:
1) Download the appropriate Stock OTA File.
2) Re-install the stock recovery onto your tablet. You will have to dig it out of the Google full factory image for the version of the OS you are currently running. (available here)
Code:
fastboot flash recovery factory-4.2.1-recovery.img
3) Soft-boot into a custom recovery, e.g.
Code:
fastboot boot openrecovery-twrp-2.4.1.0-grouper.img
5) Using the command line and adb to communicate with the soft-booted recovery, create a recovery command file:
Code:
C:\myPCsux> adb push 6ece895ecb23.signed-nakasi-JDQ39-from-JOP40D.6ece895e.zip /cache/update.zip
C:\myPCsux> adb shell
# cd /cache/recovery
# cat > command
--update_package=/cache/update.zip
^D # ( that is a Control-D character )
# sync
# reboot recovery
This will either succeed or fail. Based on your comments though, you might just want to overflash a Stock-derived ROM over the top of your existing ROM (a "no-wipe" install).
[ROM][Factory Image][4.2.2] Nakasi -::- Odex, Deodex, Rooted -::- teshxx (02/14/13) <-- NOTE for WiFi (nakasi/grouper) ONLY
good luck with your tab.
Someone once said "Rooting is a lifestyle". There's some truth to that; it eats up your time. Perhaps it is not for you.
Thanks, bftb0.
Looking through your list of reasons for why my OTA might not work, none of them applied to me.
I didn't install any custom recovery (didn't install Clockwork Mod recovery specifically to avoid dealing with flashing roms) or kernels or modify any partitions, nor to my knowledge changed any files in the /system section.
I think I'm going to give this update a week or so to pop up on my update menu before I start tinkering again.
Don't get me wrong - I enjoy this kind of tinkering, and all the perks of rooting, but my knowledge is extremely limited, which is what makes it frustrating trying to find information. The only thing I've done before this is install Cyanogen on my HP Touchpad.
Anyway, do I need to install CWM recovery to flash (overflash?) that 4.2.2 rom you linked?
if you haven't done anything other than rooting(i.e. copying a file su to it), OTA would go through. Your problem is about the download process. It can go wrong for many reasons from the download is bad to what saved to the temp area(where the download is) is bad(rare but still possible).
chimpanzeexda said:
if you haven't done anything other than rooting(i.e. copying a file su to it), OTA would go through. Your problem is about the download process. It can go wrong for many reasons from the download is bad to what saved to the temp area(where the download is) is bad(rare but still possible).
Click to expand...
Click to collapse
That's all I've done, root and unlock bootloader. The download only showed up when I cleared data and force stopped the "Google Services Framework" process. I reboot the system, and check for the update and nothing is there.
well, sounds like you have to flash it manually using fastboot then.
That said, I myself have no intention of doing the update any time soon as I don't find any specific problem with 4.2.1 and there isn't any specific feature i want in 4.2.2
Horadrius said:
Anyway, do I need to install CWM recovery to flash (overflash?) that 4.2.2 rom you linked?
Click to expand...
Click to collapse
TL;DR Yes and No.
People that use toolkits seem to use hard-flashed installs of custom recoveries, as they don't really understand what goes on under the hood, even if the toolkit offers them a means to soft-boot any image the toolkit operator downloads. (I assume that the toolkits probably allow this; as I don't use them I don't know for sure.)
What I am saying is that the answer depends on your knowledge. So long as you have an unlocked bootloader, you can soft-boot any boot image you like - including custom recoveries.. (This also pre-supposes correctly-functioning device drivers, but that is a Windows/user training issue, it has nothing to do with Android).
When I say soft-boot, I mean that the image is transferred to the tablet, which then hands over control and starts executing that image - but it is not "flashed" to Flash memory, so the next time a boot occurs, the same boot images are still stored in either "boot" or "recovery".
In this configuration, the phone should be much more likely to complete an OTA as it will have the stock recovery present most of the time, and only temporarily present when you attach to your PC and kick things off with a custom recovery.
The OTA could still fail, but it probably would succeed for a very lightly rooted stock configuration (other than problems with losing root).
The only downside to this arrangement is that you can't be flashing roms or making nandroid backups or other forms of rooter activities when you are away from the PC.
For the IT-OCD or obsessive ROM hopper, that could be a good thing.
good luck... the rest is up to you.
Ok, I installed Clockwork Mod from a toolkit because going into fastboot and choosing "Recovery mode" led me to a picture of the Android guy with a red triangle on his back saying "No Command."
I'm just going to install 4.2.2 myself now. Question regarding that link - odex/deodexed - I looked up the difference but can't tell which one is appropriate for me - I'm guessing it's odex because that seems to be closer to stock.
Edit: It worked! Thanks for your assistance, everyone!
IMO, google should not ship odex image now that we have fast enough hardware. odex is just a form of 'pre-compilation' which only benefit first time load(or when the cache is cleared). Too little gain for such a complicated setup.
Hello
My phone tells me that it is ready to update to Kit Kat.
Before I install Kit Kat I would like to learn how to go back to Jelly Bean if things go t1ts-up.
So, I would like to learn how to root my phone?
I would also like to learn how to backup everything including the Jelly Bean operating system, and I would like to know how to revert my phone back to Jelly Bean?
Please forgive my ignorance, but this whole process genuinely scares me. I have only ever rooted my Samsung Ace phone once and the experience left a bitter taste in my mouth.
I did manage to root my phone. I also thought that I had created a backup but when I tested the backup I discovered that my phone got wiped and I ended up with a brick. I eventually found an official Samsung ROM but it wasn't the one I wanted and it caused a few problems, especially with the Bluetooth feature.
I hope you can understand or appreciate my apprehension with even contemplating such a task on my expensive Nexus 4.
Cheers muchly
the lemming said:
Hello
My phone tells me that it is ready to update to Kit Kat.
Before I install Kit Kat I would like to learn how to go back to Jelly Bean if things go t1ts-up.
So, I would like to learn how to root my phone?
I would also like to learn how to backup everything including the Jelly Bean operating system, and I would like to know how to revert my phone back to Jelly Bean?
Please forgive my ignorance, but this whole process genuinely scares me. I have only ever rooted my Samsung Ace phone once and the experience left a bitter taste in my mouth.
I did manage to root my phone. I also thought that I had created a backup but when I tested the backup I discovered that my phone got wiped and I ended up with a brick. I eventually found an official Samsung ROM but it wasn't the one I wanted and it caused a few problems, especially with the Bluetooth feature.
I hope you can understand or appreciate my apprehension with even contemplating such a task on my expensive Nexus 4.
Cheers muchly
Click to expand...
Click to collapse
You might want to check out the Wugfresh's toolkit if you are not incline with technical stuff. The toolkit is in the Development section.
Hello
I have no idea what Wugfresh's tool-kit is.
Sorry
the lemming said:
Hello
I have no idea what Wugfresh's tool-kit is.
Sorry
Click to expand...
Click to collapse
I would suggest that you study up and follow this guide here. http://forum.xda-developers.com/showthread.php?t=2010312
I was like you when I first got the nexus. Didn't know what to do and the steps seems to be so complicated. Hell..I even took couple of days to finally succeed in installing the drivers. And for me I think it is better to learn the basics of using adb before trying out the toolkits. If you start with toolkits and you will later on rely entirely on the toolkits. This is not good as some problems, the toolkits might not be able to solve it for you.
Btw, look into original android development for wug's toolkits. It is pinned there. Should be easy to find.
Sent from my Nexus 4 using xda premium
You seem to be taking interest in Rooting and stuffs. I would suggest you to get handy with a few ADB and FASTBOOT commands and you won't need any toolkit ever in Life !!!
Its very very very easy in Nexus Devices.
Here is my attempt to make you learn :-
1. Say Bye Bye to your phone OS version.
2. Open Command Prompt or Terminal.(Assuming, you have SDK & Drivers installed)
Code:
adb devices
It shall return you the device id.
3. Reboot to BootLoader
Code:
adb reboot-bootloader
4. Check for your device's recognition in FastBoot Mode.
Code:
fastboot devices
5. I assume you have all the files(Factory Image tar.gz extracted to a folder)
just type :-
Code:
flash-all.bat
BOOM...
You are now on stock KitKat !
Now, To get a Custom Recovery (IMHO go with TWRP),
1. Download latest recovery from the official website.
2. Type when in FastBoot Mode.
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.4-mako.img
(Or whatever the name is)
3. Reboot your device.
Now, to get the ROOT ACCESS, after booting up the device,
1. Download the latest UPDATE-SuperSU zip from here.
2. Keep it somewhere in DEVICE STORAGE.
3. open TWRP RECOVERY
4. FLASH that ZIP
5. HIT THANKS !
Have Fun ...
Welcome to the Flashing Fraternity !!! LOL
miku3191 said:
You seem to be taking interest in Rooting and stuffs. I would suggest you to get handy with a few ADB and FASTBOOT commands and you won't need any toolkit ever in Life !!!
BOOM...
You are now on stock KitKat !
Click to expand...
Click to collapse
Hello
Thank you for replying but I fear that I will not be following your advice at the moment.
I initially asked how to ROOT my phone so that I can learn how to do backups and recoveries. My phone is ready for the Over The Air official upgrade.
I want to take things one step at a time rather than causing problems by blindly following code.
Sorry
the lemming said:
Hello
Thank you for replying but I fear that I will not be following your advice at the moment.
I initially asked how to ROOT my phone so that I can learn how to do backups and recoveries. My phone is ready for the Over The Air official upgrade.
I want to take things one step at a time rather than causing problems by blindly following code.
Sorry
Click to expand...
Click to collapse
If you want official OTA update of KitKat you should update it, and after that unlock bootloader and root phone. That way nothing will go wrong.
If you unlock bootloader and root your phone OTA update will cause problems like stuck in bootloop(your phone will be stuck on nexus logo and it will never boot into android)
If you want to learn about rooting I suggest you this http://forum.xda-developers.com/showthread.php?t=2367406
this is excelent tutorial how to root your nexus 4 http://forum.xda-developers.com/showthread.php?t=2018179
and if you are more comfortable to hear and see somebody do it you can check out this page it have video of full process and pictures for every step http://nexus4root.com/nexus-4-root/how-to-root-nexus-4-windowsmac-osxlinuxubuntu/
Good luck!:cyclops:
miku3191 said:
You seem to be taking interest in Rooting and stuffs. I would suggest you to get handy with a few ADB and FASTBOOT commands and you won't need any toolkit ever in Life !!!
Its very very very easy in Nexus Devices.
Good luck!:cyclops:
Click to expand...
Click to collapse
This process is an absolute nightmare.
All I want to do is back-up my Jelly Bean phone operating system and have it safe in case the OTA Kit Kat goes wrong. I thought that this was sensible and safe practice before doing any updates, especially something as serious as a system update?
I have now tried several Tutorials on how to root my phone and all I have succeeded in doing is wiping my phone clean and returning it to Factory Settings. The latest Tutorial was here
http://forum.xda-developers.com/showthread.php?t=2010312
I followed the following advice to this point
1) All of the files that are required, need to be in one (i.e., the same) directory. It does not matter what it is called, but all the files need to be in there, with NO subfolders. EVERYTHING needs to be extracted into this one directory;
2) Download the attachment from the end of this post and extract the contents to the directory created in step 1. (Latest version for Windows is here). Note: if all you want to do is unlock your bootloader, skip to step 7 in this section (C).
7) Reboot your device into bootloader mode (by turning it off, hold volume down, and press and hold power) and plug it into your computer;
8) Open a command prompt in the same directory (i.e., make sure you are in the same directory as your files are located). You can hold the shift key when you are in the folder in Windows explorer and right-click in a blank spot and it will open a command prompt.
I then get to the bit about rooting
E. Optional -- Root
If you want to get root access follow the steps below. (And no, this will not flash a custom recovery, and not, it will not make you "not stock".) Unlocked bootloader required. See steps above.
1) Download (to your computer) the latest version of CWM (from here) or TWRP (from here) for your device;
http://www.clockworkmod.com/rommanager/
http://www.clockworkmod.com/rommanager/developers/mako?name=Google Nexus 4
And when I click the link I am blinded by options. This is a nightmare.
Could somebody please cut through all this hyperbole and just explain how I get ROOT?
I have been at this for 24 hours solid.
the lemming said:
This process is an absolute nightmare.
All I want to do is back-up my Jelly Bean phone operating system and have it safe in case the OTA Kit Kat goes wrong. I thought that this was sensible and safe practice before doing any updates, especially something as serious as a system update?
I have now tried several Tutorials on how to root my phone and all I have succeeded in doing is wiping my phone clean and returning it to Factory Settings. The latest Tutorial was here
http://forum.xda-developers.com/showthread.php?t=2010312
I followed the following advice to this point
1) All of the files that are required, need to be in one (i.e., the same) directory. It does not matter what it is called, but all the files need to be in there, with NO subfolders. EVERYTHING needs to be extracted into this one directory;
2) Download the attachment from the end of this post and extract the contents to the directory created in step 1. (Latest version for Windows is here). Note: if all you want to do is unlock your bootloader, skip to step 7 in this section (C).
7) Reboot your device into bootloader mode (by turning it off, hold volume down, and press and hold power) and plug it into your computer;
8) Open a command prompt in the same directory (i.e., make sure you are in the same directory as your files are located). You can hold the shift key when you are in the folder in Windows explorer and right-click in a blank spot and it will open a command prompt.
I then get to the bit about rooting
E. Optional -- Root
If you want to get root access follow the steps below. (And no, this will not flash a custom recovery, and not, it will not make you "not stock".) Unlocked bootloader required. See steps above.
1) Download (to your computer) the latest version of CWM (from here) or TWRP (from here) for your device;
http://www.clockworkmod.com/rommanager/
http://www.clockworkmod.com/rommanager/developers/mako?name=Google Nexus 4
And when I click the link I am blinded by options. This is a nightmare.
Could somebody please cut through all this hyperbole and just explain how I get ROOT?
I have been at this for 24 hours solid.
Click to expand...
Click to collapse
The point you are missing is that your fear is clouding your ability to simply read and comprehend the proper steps to take. My friend rooting your phone with a toolkit is a simple task but you ask what is Wugs toolkit instead of taking the time to search for it an read up. YOu do not want to root your phone but to have someone do it for you. I used to do this for people back in the days where I would log into their pc and root their phones from my home.
My friend its simple your bootloader is unlocked and now all you need to do is push a recovery over to your phone. Now go to the TWRP thread and download the image file and follow the instructions given to you to flash the recovery. I fear if following these simple directions are too much for you maybe you should simply leave your phone alone before the next step is you calling Google with an issue or having to buy another phone...
Sorry but thats my honest opinion....
Edit: Boot into bootloader and check to see if its says unlocked. If so then all thats left is flashing a recovery
the lemming said:
This process is an absolute nightmare.
And when I click the link I am blinded by options. This is a nightmare.
Could somebody please cut through all this hyperbole and just explain how I get ROOT?
I have been at this for 24 hours solid.
Click to expand...
Click to collapse
Reading your posts, I understand your frustration. Here are my suggestions, 1) step away from your PC for a few minutes or an hour or get a cup of water, 2) put the phone aside, 3) read and re-read the information in Google Nexus 4 threads just to get the knowledge first and then start working on your phone. You will be doing fine. BTW, you should have a back up phone that you can use while working on your Nexus 4.
playya said:
Edit: Boot into bootloader and check to see if its says unlocked. If so then all thats left is flashing a recovery
Click to expand...
Click to collapse
Thank you for this useful bit of information.
the lemming said:
Thank you for this useful bit of information.
Click to expand...
Click to collapse
You got it man I know but sometimes the truth hurts... You have been given all the information laid out for you in the posts above. If this is still too difficult for you your only other task is to actually have somebody do it for you this is nothing more than simply reading and taking your time. I tell you this with all sincerity I would rather see you stop now than later see another thread created by you saying possibly bricked
Sent from my Nexus 4 using Tapatalk
---------- Post added at 02:51 PM ---------- Previous post was at 02:51 PM ----------
playya said:
You got it man I know but sometimes the truth hurts... You have been given all the information laid out for you in the posts above. If this is still too difficult for you your only other task is to actually have somebody do it for you this is nothing more than simply reading and taking your time. I tell you this with all sincerity I would rather see you stop now than later see another thread created by you saying possibly bricked
Take care
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Sent from my Nexus 4 using Tapatalk
the lemming said:
And when I click the link I am blinded by options. This is a nightmare.
Could somebody please cut through all this hyperbole and just explain how I get ROOT?
I have been at this for 24 hours solid.
Click to expand...
Click to collapse
I trust that you have read the entire guide from that link you post. To get you see this clearly. Rooting is very easy. You just have to:
1. Install driver, download platform-tools (if you don't wanna download the entire android sdk) and SuperSU I trust that all the links are given in that guide.
2. Make sure you device is detected in adb. Copy SuperSU.zip into your device.
3. Unlock your device.
4. Push recovery. fastboot flash recovery recovery name.img
5. Reboot into recovery and flash SuperSu.zip
6. Reboot. Done.
Really..this is all it takes to perform a simple rooting. But if you're not the one who likes to read..and try to understand the steps. I suggest you not to mess with your device. You are more likely to brick it than make it better. The truth hurts but it is for your own good. Unless you prove me wrong. Then you are awesome instead
Sent from my Nexus 4 using xda premium
Update March 8 2017: As you can probably tell, this is very old. I have not worked on the device in several months and I have no idea if these methods are still safe. Please proceed with caution. I will be using one of these on a daily basis in the near future, so I probably will get back into development, and hope to release new content for the phone to help out the community. Please accept this as an official warning that the following is probably out of date and that you should be very careful should you decide to try it. The original post in it's entirety is spoilered below. You have been warned.
Update: A new update was released for the Prime model, V6.6, which replaces the preloader and completely breaks SPFT. If you unlocked your bootloader (so you can use fastboot) in any capacity before taking that update, there may be hope for you yet, but as of right now V6.6 is unsupported. Update: If you used this method to safely* take* the V6.6* update*, this will still work.
Update: I just checked the stats, and this has been downloaded more than 3 thousand times. I never thought my humble little conversion guide would help out so many people. I have also added a new mirror at [REDACTED], so anyone in North America who was having trouble with the Europe mirror, give that one a shot. It should be faster! I have updated all links in the guide to use the new North America mirror, and added a separate Europe mirror link after each link.
Hello! This is a tutorial for converting the Amazon Prime Edition BLU R1 HD to the OEM BLU version. This will overwrite the relevant partitions on your Amazon version of the device with the non-Amazon version. The physical model number on your device will still be a tell (obviously), but besides that, there will be no way to tell your device apart from the regular model! You can also use this method to convert non-Prime to Prime version, and undo OTAs or system modifications. This will restore a 100% out of the box image from either edition on your device.
This will work if you have software version...
V12
V6.1
V6.4
V6.5
SAFE V6.6 FROM THIS THREAD
This will NOT work on software version...
V6.6
The V6.6 update brought a new preloader that breaks our ability to use SPFT. I am currently working on ways to reverse the damage, but as of right now, there is no way to convert (or downgrade) from software V6.6
You can use this on any 16/2 R1 HD with supported software version to...
Convert to the non-Prime OEM version
Convert to the Prime version
Remove ads (via conversion to non-Prime version)
Unroot
Downgrade to V6.1
Downgrade to V12
Undo system alterations/tampers
Restore the system image to the way it was when you first opened the box
Unbrick a device (if bricked because of bad system/recovery/boot image)
There are a handful of reports about this working flawlessly on the 8/1 model as well. I have not personally tested this, so there is still some risk factor.
This only overwrites the system, recovery, and boot partitions. Any other partitions that have been altered will not be restored. In most cases, other partitions should not have been altered, so this is not a concern. I have a full system backup of all partitions, but there is currently evidence to suggest that it is not safe to flash all of the partitions, so I will not release that backup until more is known.
You *should* be able to safely pull this off without wiping your data. This does not require your phone to be rooted or have any other modifications. You can pull it straight out of the box and do this process! If your phone is rooted, you'll lose it. This will make your phone EXACTLY like the non-Prime version comes out of the box! You can also convert a non-Prime device (or a converted Prime device back) to a Prime device using the same method, but I'm not exactly sure why you would want to. I did this all on Linux, but the Windows should work fine too as long as you have drivers dealt with. If you don't have drivers dealt with, I'm not your guy. I'll just tell you to use a better operating system. You'll also need an archive program that can deal with tar.gz files, because that's how my computer zipped them.
And the standard disclaimer: If this bricks your phone or makes it become sentient and plot with other sentient phones to murder your entire family, it's not my fault. That's all on you, buddy.
Ok, without further ado, on to the tutorial!
First, you need these things. Some of the files are quire large, so it might take a while to download:
You'll need the latest version of Smart Phone Flash Tools, or SPFT for short. You can download that from this site, or from [REDACTED]. Please use the latest version for your OS.
You'll need to download the system image. If you're converting to the non-Prime version, [REDACTED]. If you're converting to the Prime version, [REDACTED]
You need the scatter file. This will tell SPFT where the partitions are. This is the same for both variants, so just download [REDACTED]
Once you have those things, you can start actually flashing your phone:
Power your phone completely OFF! This will not work if your phone is powered on. SPFT writes directly to the phone's memory, bypassing all security measures the phone has, so it requires the phone to be completely OFF to get safe and exclusive access to the memory. DO NOT PLUG IN YOUR PHONE YET!
Extract SPFT into a folder on your computer. If you can't figure out how to do that, please stop tinkering with your phone. It's only a matter of time until you break something.
Extract the system image into the same folder you put SPFT in. The three files (boot.img, recovery.img, system.img) should be in the same folder as all the other SPFT files, including the binaries.
Run SPFT. On Windows, simply double clicking the SPFT executable should do the trick. On Linux, you must run the flash_tool.sh script as root. Open a terminal emulator, cd to the SPFT folder, and run `sudo ./flash_tool.sh`. If you recieve an error about permissions, run `chmod +x flash_tool.sh` and try the first command again.
Go to the Download tab in SPFT and click the Scatter-loading button on the far right side. DO NOT click the Download Agent button. When the file picker dialog pops up, find and open the r1hd-spft-scatter.txt file you downloaded earlier.
You should see a list of partitions. Only three of them (boot, recovery, system) should be checked, and the location should point to the files you extracted from the tar.gz file earlier. If this is not the case, double-click the location block of the boot, recovery, and system partitions, and select the boot.img, recovery.img, and system.img files from your filesystem respectively. After selecting the files, the boxes should check themselves.
From the dropdown in the upper left of the partition list, make sure Download Only is selected. Any other option could damage your device.
Click the Download button in the upper left.
While your phone is OFF, plug it into your computer with a data safe USB cable. The cable that came in the box from the factory is ideal, but any good quality cable will work just fine.
SPFT should start overwriting your phone. If you receive an error from SPFT, unplug your phone, close SPFT, and repeat steps 4 through 9. The whole process takes about 10 minutes, after which you should see a window with a large green checkmark. Once you see that window, you can safely unplug your phone and start it up. You're all done!
And as a bonus, I've also included a guide for unlocking the bootloader, getting custom recovery, and rooting the device after you've done this in post #2. That makes this your one stop shop for getting a brand new Prime phone out of the box!!
HUGE THANKS TO @mrmazak FOR THEORIZING THIS METHOD AND GETTING ME THE NON-PRIME SYSTEM IMAGE TO USE!
As always, if you have any questions, just ask in a thread reply or send me a private message on XDA. And by the way, hit the Thanks button in the lower right corner of the post if my guide helps you. It motivates me to keep this up to date and write more helpful guides. If you feel like giving me even more motivation and help fund future development, [REDACTED].
{OUTDATED}[GUIDE][OEM][Stock] Bootloader Unlock, TWRP, and root!
Update March 8 2017: As you can probably tell, this is very old. I have not worked on the device in several months and I have no idea if these methods are still safe. Please proceed with caution. I will be using one of these on a daily basis in the near future, so I probably will get back into development, and hope to release new content for the phone to help out the community. Please accept this as an official warning that the following is probably out of date and that you should be very careful should you decide to try it. The original post in it's entirety is spoilered below. You have been warned.
Ok, now you've converted your brand new Prime phone to the non-Prime version. How do you unlock this sucker? The conversion process actually unlocks the standard unlock method from the factory, so it's VERY simple! No hoops to jump through or anything. You'll need adb and fastboot. You can get those as part of the official Android developer kit, your distro's repos (on Linux) or Homebrew (on Mac). Of course, this guide works for the normal non-converted non-Prime version as well. This WILL wipe your phone, so make sure you back up any important data before doing this.
This guide is for the OEM (non-Prime) version. If you have the Prime version, convert it to OEM using the guide above BEFORE doing this guide.
The standard disclaimer from above still applies.
This guide is broken up into two parts. Unlocking the bootloader, and rooting the phone. If you are preparing to install Magisk, do the bootloader unlock, skip the rooting part and move on to the Magisk guide. You do not need the files above if you are only unlocking the bootloader. If your bootloader is already unlocked, skip the bootloader unlocking part and skip to rooting the phone. If you are preparing to install Magisk and your bootloader is already unlocked, you shouldn't be here. Also please note that the bootloader can sometimes re-lock itself after completing a conversion/restore from the guide above, especially to/from the Prime version, so if you're not sure, play it safe and re-unlock your bootloader.
Part 1 - Unlocking the bootloader:
Boot up your phone. If you haven't already gone through the initial setup process, go through it. The bootloader unlock process will wipe your phone, so skip as many questions as possible so you don't waste your time.
Open the Settings app, go to About device, fine the Build number (it's toward the bottom), and tap on it 8-10 times (until it says you are now a developer. If it says there's no need and you're already a developer, you can skip to the next step)
Go back to the main Settings menu. You should see a new option where About device used to be, Developer options! Click on it.
Toward the top of the long list of developer options, there is an option called "OEM unlocking". If it's switched off, switch it on. If it's switched on, switch it off and back on again. You may get a warning saying that device protection features won't work. Click Enable and proceed. You may also be prompted to enter your password/PIN/pattern lock if you have one.
Scroll down a little bit to reveal USB debugging. Switch it on if it's not already.
Connect your phone to your computer using a data safe cable. Do not disconnect it until the very end.
On your computer, open a terminal emulator (or Command Prompt with ADB access) and run `adb reboot bootloader`. If you get a message complaining about keys or authorization, check your phone. There should be a window asking for permission for your computer to access the device. Allow it and run the command again.
Your phone will reboot into fastboot mode.
On your computer, run `fastboot oem unlock`. On the phone you will get a warning message talking about the implications of unlocking the bootloader. Press Volume Up to accept them. If everything goes smoothly, your bootloader should now be unlocked. You're not ready to flash quite yet! Flashing at this stage WILL brick your phone, so it's important that you continue following the guide carefully.
On your computer, run `fastboot reboot`. Your phone should reboot anywhere from 3 to 5 times. If it reboots more than that, your phone is bricked and you need to start again by following the guide above again.
Once Android starts up again, you should see the setup wizard. Your bootloader is now unlocked!
Part 2 - rooting the phone:
BEFORE YOU PROCEED: If you want your phone to be encrypted AND rooted, it's important that you unlock the bootloader using the steps above first, then use the encryption APK to encrypt your phone BEFORE installing TWRP and rooting your device. This device is an exception to the general rule of flashing TWRP first and then rooting afterwards. Repeat, if you want your phone encrypted and rooted, unlock the bootloader FIRST, then encrypt SECOND, then flash TWRP THIRD, and root your phone LAST.
This is the guide for rooting the actual phone. You must unlock the bootloader using the steps above before doing this part.
First, you'll need these things on your computer.
The TWRP image for the R1 HD. You can download [REDACTED]).
A copy of the latest SuperSU zip from Chainfire. You can get it from the official forum post, or Chainfire's website.
Linux Users: On Linux, you must add `sudo` to the beginning of all fastboot commands, because most Linux distributions will not give you enough access to the hardware without being root.
And finally, the guide:
Hold Volume Up and Power until the phone turns on with the boot menu. Once the boot menu appears, use the volume keys to scroll to [Fastboot Mode] and press the power button to select it. It's the middle option.
On your computer, cd to the folder where you downloaded twrp-3.0.2-1-r1hd-lopestom.img and do `fastboot flash recovery twrp-3.0.2-1-r1hd-lopestom.img`.
On your computer, do `fastboot boot twrp-3.0.2-1-r1hd-lopestom.img`.
Once TWRP boots up, dismiss the prompt about mounting the system, go to Reboot, then choose Recovery. Your device will reboot back into TWRP. I know this step seems odd, but just trust me.
Make a backup if you want. It's not a bad idea, but seeing how you just unlocked your bootloader so your data is gone and we have the images in case you somehow brick the system, I doubt you actually need it.
In TWRP, go to Advanced, then ADB Sideload. Slide the confirmation slider all the way to the right to confirm.
On your computer, cd to the folder where you downloaded SuperSU and run `adb sideload [SuperSU-zip-name.zip]`, replacing the last argument with the name of the SuperSU zip you downloaded, of course. If your computer says "waiting for device" for a long time, cancel with Ctrl+C, run `adb kill-server`, then run the first command again but with `sudo` in front this time.
Reboot the phone. If everything worked correctly, you should now have a rooted phone with SuperSU, bootloader unlocked, and custom recovery! Yay for cheap phones!
As always, if you have any questions, just ask in a thread reply or send me a private message on XDA. And by the way, hit the Thanks button in the lower right corner of the post if my guide helps you. It motivates me to keep this up to date and write more helpful guides. If you feel like giving me even more motivation and help fund future development, [REDACTED].
reserved 3
reserved 4
reserved 5
Can you verify the image you uploaded for the non-Prime version? I'm getting unexpected EOF errors when extracting in Windows using 7Zip and TarTool, and I'm also getting an "operation not permitted" error when extracting using the built in Archive Utility in OS X.
abs0lute said:
Can you verify the image you uploaded for the non-Prime version? I'm getting unexpected EOF errors when extracting in Windows using 7Zip and TarTool, and I'm also getting an "operation not permitted" error when extracting using the built in Archive Utility in OS X.
Click to expand...
Click to collapse
Yeah, that's because the image isn't fully uploaded. My internet is very slow, so it's taking a while to upload. Sorry about that. I was hoping it would be finished by the time I finished writing this, but alas, nope. I will have all files uploaded by tomorrow, along with .md5 files so you can verify the checksums, so come back then. Again, sorry. I guess I should have posted this _after_ I got those uploaded. Oh! And I have North America mirrors coming within the next couple months. It seems a little oxy-moronic to host files for a US only device on an EU server, but unfortunately, servers in the US are significantly more expensive.
ColtonDRG said:
Yeah, that's because the image isn't fully uploaded. My internet is very slow, so it's taking a while to upload. Sorry about that. I was hoping it would be finished by the time I finished writing this, but alas, nope. I will have all files uploaded by tomorrow, along with .md5 files so you can verify the checksums, so come back then. Again, sorry. I guess I should have posted this _after_ I got those uploaded. Oh! And I have North America mirrors coming within the next couple months. It seems a little oxy-moronic to host files for a US only device on an EU server, but unfortunately, servers in the US are significantly more expensive.
Click to expand...
Click to collapse
No problem - thanks for your work on this!
abs0lute said:
No problem - thanks for your work on this!
Click to expand...
Click to collapse
Just finished uploading the non-Prime version. I will start the other upload before sleeping and update the post removing the warning when I awaken, assuming everything has gone well. You're free to attempt a non-Prime conversion now. Just don't do it the other way around yet.
Sent from my LG G4 using XDA Labs
Can't wait to give this a shot. Well, at least after someone else reports success first...
followed post 1 convert to non prime steps on windows, did not do the bootloader unlock steps.
phone booted up ok, followed by android is upgrading x of 37.
phone working and no ad's on lock screen
the amazon apps are still there but appear to be disabled, causing errors at first boot.
disabled or uninstall the apps. - used cleanmaster
everything seems ok now
Hello, I have now finished uploading the files, so you can now safely flash away! Enjoy! @abs0lute
bupkis said:
Can't wait to give this a shot. Well, at least after someone else reports success first...
Click to expand...
Click to collapse
I report success. Of course I did everything in the guide here before posting it. I'm not irresponsible. It's completely safe. I just finished uploading the files, so please go ahead and give it a shot.
ColtonDRG said:
I report success. Of course I did everything in the guide here before posting it. I'm not irresponsible. It's completely safe. I just finished uploading the files, so please go ahead and give it a shot.
Click to expand...
Click to collapse
ok, away we go! :laugh:
When I try to download the scatter file it just opens the file in a new browser window.
>nevermind, figured it out...success!
...on to bootloader unlock, TWRP, root...
bupkis said:
...
When I try to download the scatter file it just opens the file in a new browser window.
...
Click to expand...
Click to collapse
Yeah, that's a problem with my server configuration. I'll fix it later. For now, you can save the file by opening it in a browser window and pressing Ctrl+S
I have completed the process successfully-TWRP, root, no ads but do still have all the Amazon apps so something is screwy but not the end of the world.
bupkis said:
I have completed the process successfully-TWRP, root, no ads but do still have all the Amazon apps so something is screwy but not the end of the world.
Click to expand...
Click to collapse
Nope, it's not screwy. The non-Amazon version does include a lot of the Amazon apps. You can uninstall some of them the normal way (they're pre-installed user apps), and others you can either disable or uninstall using your favourite system app remover.
Anyone else missing Encrypt section in Settings > Security after converting to non-prime?
When I try to load the scatter, SPFT says "Error: Initializing scatter file failed. Please check the name of scatter file which you load is legal." I downloaded it from both the primary link and your mirror, same error. Any ideas? Thanks.
EDIT: Looks like I downloaded the oldest version, not the newest version of SPFT. Whoops! I'll leave my mistake on here to help others who may assume the first link is the right one.
notfix said:
Anyone else missing Encrypt section in Settings > Security after converting to non-prime?
Click to expand...
Click to collapse
It is missing. How peculiar. I will attempt to implement a workaround in a little bit. Sorry about that.
Update: The Encryption activity exists on the phone, we just can't get to it from the settings menu. You can launch it by manually launching com.android.settings.Settings$CryptKeeperSettingsActivity using your preferred method for launching arbitrary activities. I will release an app that will launch this activity for you ASAP!