Update March 8 2017: As you can probably tell, this is very old. I have not worked on the device in several months and I have no idea if these methods are still safe. Please proceed with caution. I will be using one of these on a daily basis in the near future, so I probably will get back into development, and hope to release new content for the phone to help out the community. Please accept this as an official warning that the following is probably out of date and that you should be very careful should you decide to try it. The original post in it's entirety is spoilered below. You have been warned.
Update: A new update was released for the Prime model, V6.6, which replaces the preloader and completely breaks SPFT. If you unlocked your bootloader (so you can use fastboot) in any capacity before taking that update, there may be hope for you yet, but as of right now V6.6 is unsupported. Update: If you used this method to safely* take* the V6.6* update*, this will still work.
Update: I just checked the stats, and this has been downloaded more than 3 thousand times. I never thought my humble little conversion guide would help out so many people. I have also added a new mirror at [REDACTED], so anyone in North America who was having trouble with the Europe mirror, give that one a shot. It should be faster! I have updated all links in the guide to use the new North America mirror, and added a separate Europe mirror link after each link.
Hello! This is a tutorial for converting the Amazon Prime Edition BLU R1 HD to the OEM BLU version. This will overwrite the relevant partitions on your Amazon version of the device with the non-Amazon version. The physical model number on your device will still be a tell (obviously), but besides that, there will be no way to tell your device apart from the regular model! You can also use this method to convert non-Prime to Prime version, and undo OTAs or system modifications. This will restore a 100% out of the box image from either edition on your device.
This will work if you have software version...
V12
V6.1
V6.4
V6.5
SAFE V6.6 FROM THIS THREAD
This will NOT work on software version...
V6.6
The V6.6 update brought a new preloader that breaks our ability to use SPFT. I am currently working on ways to reverse the damage, but as of right now, there is no way to convert (or downgrade) from software V6.6
You can use this on any 16/2 R1 HD with supported software version to...
Convert to the non-Prime OEM version
Convert to the Prime version
Remove ads (via conversion to non-Prime version)
Unroot
Downgrade to V6.1
Downgrade to V12
Undo system alterations/tampers
Restore the system image to the way it was when you first opened the box
Unbrick a device (if bricked because of bad system/recovery/boot image)
There are a handful of reports about this working flawlessly on the 8/1 model as well. I have not personally tested this, so there is still some risk factor.
This only overwrites the system, recovery, and boot partitions. Any other partitions that have been altered will not be restored. In most cases, other partitions should not have been altered, so this is not a concern. I have a full system backup of all partitions, but there is currently evidence to suggest that it is not safe to flash all of the partitions, so I will not release that backup until more is known.
You *should* be able to safely pull this off without wiping your data. This does not require your phone to be rooted or have any other modifications. You can pull it straight out of the box and do this process! If your phone is rooted, you'll lose it. This will make your phone EXACTLY like the non-Prime version comes out of the box! You can also convert a non-Prime device (or a converted Prime device back) to a Prime device using the same method, but I'm not exactly sure why you would want to. I did this all on Linux, but the Windows should work fine too as long as you have drivers dealt with. If you don't have drivers dealt with, I'm not your guy. I'll just tell you to use a better operating system. You'll also need an archive program that can deal with tar.gz files, because that's how my computer zipped them.
And the standard disclaimer: If this bricks your phone or makes it become sentient and plot with other sentient phones to murder your entire family, it's not my fault. That's all on you, buddy.
Ok, without further ado, on to the tutorial!
First, you need these things. Some of the files are quire large, so it might take a while to download:
You'll need the latest version of Smart Phone Flash Tools, or SPFT for short. You can download that from this site, or from [REDACTED]. Please use the latest version for your OS.
You'll need to download the system image. If you're converting to the non-Prime version, [REDACTED]. If you're converting to the Prime version, [REDACTED]
You need the scatter file. This will tell SPFT where the partitions are. This is the same for both variants, so just download [REDACTED]
Once you have those things, you can start actually flashing your phone:
Power your phone completely OFF! This will not work if your phone is powered on. SPFT writes directly to the phone's memory, bypassing all security measures the phone has, so it requires the phone to be completely OFF to get safe and exclusive access to the memory. DO NOT PLUG IN YOUR PHONE YET!
Extract SPFT into a folder on your computer. If you can't figure out how to do that, please stop tinkering with your phone. It's only a matter of time until you break something.
Extract the system image into the same folder you put SPFT in. The three files (boot.img, recovery.img, system.img) should be in the same folder as all the other SPFT files, including the binaries.
Run SPFT. On Windows, simply double clicking the SPFT executable should do the trick. On Linux, you must run the flash_tool.sh script as root. Open a terminal emulator, cd to the SPFT folder, and run `sudo ./flash_tool.sh`. If you recieve an error about permissions, run `chmod +x flash_tool.sh` and try the first command again.
Go to the Download tab in SPFT and click the Scatter-loading button on the far right side. DO NOT click the Download Agent button. When the file picker dialog pops up, find and open the r1hd-spft-scatter.txt file you downloaded earlier.
You should see a list of partitions. Only three of them (boot, recovery, system) should be checked, and the location should point to the files you extracted from the tar.gz file earlier. If this is not the case, double-click the location block of the boot, recovery, and system partitions, and select the boot.img, recovery.img, and system.img files from your filesystem respectively. After selecting the files, the boxes should check themselves.
From the dropdown in the upper left of the partition list, make sure Download Only is selected. Any other option could damage your device.
Click the Download button in the upper left.
While your phone is OFF, plug it into your computer with a data safe USB cable. The cable that came in the box from the factory is ideal, but any good quality cable will work just fine.
SPFT should start overwriting your phone. If you receive an error from SPFT, unplug your phone, close SPFT, and repeat steps 4 through 9. The whole process takes about 10 minutes, after which you should see a window with a large green checkmark. Once you see that window, you can safely unplug your phone and start it up. You're all done!
And as a bonus, I've also included a guide for unlocking the bootloader, getting custom recovery, and rooting the device after you've done this in post #2. That makes this your one stop shop for getting a brand new Prime phone out of the box!!
HUGE THANKS TO @mrmazak FOR THEORIZING THIS METHOD AND GETTING ME THE NON-PRIME SYSTEM IMAGE TO USE!
As always, if you have any questions, just ask in a thread reply or send me a private message on XDA. And by the way, hit the Thanks button in the lower right corner of the post if my guide helps you. It motivates me to keep this up to date and write more helpful guides. If you feel like giving me even more motivation and help fund future development, [REDACTED].
{OUTDATED}[GUIDE][OEM][Stock] Bootloader Unlock, TWRP, and root!
Update March 8 2017: As you can probably tell, this is very old. I have not worked on the device in several months and I have no idea if these methods are still safe. Please proceed with caution. I will be using one of these on a daily basis in the near future, so I probably will get back into development, and hope to release new content for the phone to help out the community. Please accept this as an official warning that the following is probably out of date and that you should be very careful should you decide to try it. The original post in it's entirety is spoilered below. You have been warned.
Ok, now you've converted your brand new Prime phone to the non-Prime version. How do you unlock this sucker? The conversion process actually unlocks the standard unlock method from the factory, so it's VERY simple! No hoops to jump through or anything. You'll need adb and fastboot. You can get those as part of the official Android developer kit, your distro's repos (on Linux) or Homebrew (on Mac). Of course, this guide works for the normal non-converted non-Prime version as well. This WILL wipe your phone, so make sure you back up any important data before doing this.
This guide is for the OEM (non-Prime) version. If you have the Prime version, convert it to OEM using the guide above BEFORE doing this guide.
The standard disclaimer from above still applies.
This guide is broken up into two parts. Unlocking the bootloader, and rooting the phone. If you are preparing to install Magisk, do the bootloader unlock, skip the rooting part and move on to the Magisk guide. You do not need the files above if you are only unlocking the bootloader. If your bootloader is already unlocked, skip the bootloader unlocking part and skip to rooting the phone. If you are preparing to install Magisk and your bootloader is already unlocked, you shouldn't be here. Also please note that the bootloader can sometimes re-lock itself after completing a conversion/restore from the guide above, especially to/from the Prime version, so if you're not sure, play it safe and re-unlock your bootloader.
Part 1 - Unlocking the bootloader:
Boot up your phone. If you haven't already gone through the initial setup process, go through it. The bootloader unlock process will wipe your phone, so skip as many questions as possible so you don't waste your time.
Open the Settings app, go to About device, fine the Build number (it's toward the bottom), and tap on it 8-10 times (until it says you are now a developer. If it says there's no need and you're already a developer, you can skip to the next step)
Go back to the main Settings menu. You should see a new option where About device used to be, Developer options! Click on it.
Toward the top of the long list of developer options, there is an option called "OEM unlocking". If it's switched off, switch it on. If it's switched on, switch it off and back on again. You may get a warning saying that device protection features won't work. Click Enable and proceed. You may also be prompted to enter your password/PIN/pattern lock if you have one.
Scroll down a little bit to reveal USB debugging. Switch it on if it's not already.
Connect your phone to your computer using a data safe cable. Do not disconnect it until the very end.
On your computer, open a terminal emulator (or Command Prompt with ADB access) and run `adb reboot bootloader`. If you get a message complaining about keys or authorization, check your phone. There should be a window asking for permission for your computer to access the device. Allow it and run the command again.
Your phone will reboot into fastboot mode.
On your computer, run `fastboot oem unlock`. On the phone you will get a warning message talking about the implications of unlocking the bootloader. Press Volume Up to accept them. If everything goes smoothly, your bootloader should now be unlocked. You're not ready to flash quite yet! Flashing at this stage WILL brick your phone, so it's important that you continue following the guide carefully.
On your computer, run `fastboot reboot`. Your phone should reboot anywhere from 3 to 5 times. If it reboots more than that, your phone is bricked and you need to start again by following the guide above again.
Once Android starts up again, you should see the setup wizard. Your bootloader is now unlocked!
Part 2 - rooting the phone:
BEFORE YOU PROCEED: If you want your phone to be encrypted AND rooted, it's important that you unlock the bootloader using the steps above first, then use the encryption APK to encrypt your phone BEFORE installing TWRP and rooting your device. This device is an exception to the general rule of flashing TWRP first and then rooting afterwards. Repeat, if you want your phone encrypted and rooted, unlock the bootloader FIRST, then encrypt SECOND, then flash TWRP THIRD, and root your phone LAST.
This is the guide for rooting the actual phone. You must unlock the bootloader using the steps above before doing this part.
First, you'll need these things on your computer.
The TWRP image for the R1 HD. You can download [REDACTED]).
A copy of the latest SuperSU zip from Chainfire. You can get it from the official forum post, or Chainfire's website.
Linux Users: On Linux, you must add `sudo` to the beginning of all fastboot commands, because most Linux distributions will not give you enough access to the hardware without being root.
And finally, the guide:
Hold Volume Up and Power until the phone turns on with the boot menu. Once the boot menu appears, use the volume keys to scroll to [Fastboot Mode] and press the power button to select it. It's the middle option.
On your computer, cd to the folder where you downloaded twrp-3.0.2-1-r1hd-lopestom.img and do `fastboot flash recovery twrp-3.0.2-1-r1hd-lopestom.img`.
On your computer, do `fastboot boot twrp-3.0.2-1-r1hd-lopestom.img`.
Once TWRP boots up, dismiss the prompt about mounting the system, go to Reboot, then choose Recovery. Your device will reboot back into TWRP. I know this step seems odd, but just trust me.
Make a backup if you want. It's not a bad idea, but seeing how you just unlocked your bootloader so your data is gone and we have the images in case you somehow brick the system, I doubt you actually need it.
In TWRP, go to Advanced, then ADB Sideload. Slide the confirmation slider all the way to the right to confirm.
On your computer, cd to the folder where you downloaded SuperSU and run `adb sideload [SuperSU-zip-name.zip]`, replacing the last argument with the name of the SuperSU zip you downloaded, of course. If your computer says "waiting for device" for a long time, cancel with Ctrl+C, run `adb kill-server`, then run the first command again but with `sudo` in front this time.
Reboot the phone. If everything worked correctly, you should now have a rooted phone with SuperSU, bootloader unlocked, and custom recovery! Yay for cheap phones!
As always, if you have any questions, just ask in a thread reply or send me a private message on XDA. And by the way, hit the Thanks button in the lower right corner of the post if my guide helps you. It motivates me to keep this up to date and write more helpful guides. If you feel like giving me even more motivation and help fund future development, [REDACTED].
reserved 3
reserved 4
reserved 5
Can you verify the image you uploaded for the non-Prime version? I'm getting unexpected EOF errors when extracting in Windows using 7Zip and TarTool, and I'm also getting an "operation not permitted" error when extracting using the built in Archive Utility in OS X.
abs0lute said:
Can you verify the image you uploaded for the non-Prime version? I'm getting unexpected EOF errors when extracting in Windows using 7Zip and TarTool, and I'm also getting an "operation not permitted" error when extracting using the built in Archive Utility in OS X.
Click to expand...
Click to collapse
Yeah, that's because the image isn't fully uploaded. My internet is very slow, so it's taking a while to upload. Sorry about that. I was hoping it would be finished by the time I finished writing this, but alas, nope. I will have all files uploaded by tomorrow, along with .md5 files so you can verify the checksums, so come back then. Again, sorry. I guess I should have posted this _after_ I got those uploaded. Oh! And I have North America mirrors coming within the next couple months. It seems a little oxy-moronic to host files for a US only device on an EU server, but unfortunately, servers in the US are significantly more expensive.
ColtonDRG said:
Yeah, that's because the image isn't fully uploaded. My internet is very slow, so it's taking a while to upload. Sorry about that. I was hoping it would be finished by the time I finished writing this, but alas, nope. I will have all files uploaded by tomorrow, along with .md5 files so you can verify the checksums, so come back then. Again, sorry. I guess I should have posted this _after_ I got those uploaded. Oh! And I have North America mirrors coming within the next couple months. It seems a little oxy-moronic to host files for a US only device on an EU server, but unfortunately, servers in the US are significantly more expensive.
Click to expand...
Click to collapse
No problem - thanks for your work on this!
abs0lute said:
No problem - thanks for your work on this!
Click to expand...
Click to collapse
Just finished uploading the non-Prime version. I will start the other upload before sleeping and update the post removing the warning when I awaken, assuming everything has gone well. You're free to attempt a non-Prime conversion now. Just don't do it the other way around yet.
Sent from my LG G4 using XDA Labs
Can't wait to give this a shot. Well, at least after someone else reports success first...
followed post 1 convert to non prime steps on windows, did not do the bootloader unlock steps.
phone booted up ok, followed by android is upgrading x of 37.
phone working and no ad's on lock screen
the amazon apps are still there but appear to be disabled, causing errors at first boot.
disabled or uninstall the apps. - used cleanmaster
everything seems ok now
Hello, I have now finished uploading the files, so you can now safely flash away! Enjoy! @abs0lute
bupkis said:
Can't wait to give this a shot. Well, at least after someone else reports success first...
Click to expand...
Click to collapse
I report success. Of course I did everything in the guide here before posting it. I'm not irresponsible. It's completely safe. I just finished uploading the files, so please go ahead and give it a shot.
ColtonDRG said:
I report success. Of course I did everything in the guide here before posting it. I'm not irresponsible. It's completely safe. I just finished uploading the files, so please go ahead and give it a shot.
Click to expand...
Click to collapse
ok, away we go! :laugh:
When I try to download the scatter file it just opens the file in a new browser window.
>nevermind, figured it out...success!
...on to bootloader unlock, TWRP, root...
bupkis said:
...
When I try to download the scatter file it just opens the file in a new browser window.
...
Click to expand...
Click to collapse
Yeah, that's a problem with my server configuration. I'll fix it later. For now, you can save the file by opening it in a browser window and pressing Ctrl+S
I have completed the process successfully-TWRP, root, no ads but do still have all the Amazon apps so something is screwy but not the end of the world.
bupkis said:
I have completed the process successfully-TWRP, root, no ads but do still have all the Amazon apps so something is screwy but not the end of the world.
Click to expand...
Click to collapse
Nope, it's not screwy. The non-Amazon version does include a lot of the Amazon apps. You can uninstall some of them the normal way (they're pre-installed user apps), and others you can either disable or uninstall using your favourite system app remover.
Anyone else missing Encrypt section in Settings > Security after converting to non-prime?
When I try to load the scatter, SPFT says "Error: Initializing scatter file failed. Please check the name of scatter file which you load is legal." I downloaded it from both the primary link and your mirror, same error. Any ideas? Thanks.
EDIT: Looks like I downloaded the oldest version, not the newest version of SPFT. Whoops! I'll leave my mistake on here to help others who may assume the first link is the right one.
notfix said:
Anyone else missing Encrypt section in Settings > Security after converting to non-prime?
Click to expand...
Click to collapse
It is missing. How peculiar. I will attempt to implement a workaround in a little bit. Sorry about that.
Update: The Encryption activity exists on the phone, we just can't get to it from the settings menu. You can launch it by manually launching com.android.settings.Settings$CryptKeeperSettingsActivity using your preferred method for launching arbitrary activities. I will release an app that will launch this activity for you ASAP!
Related
As I begin rooting process for my J710, and realize that the J710 is still fairly new so I thought I write this post and share my notes with everyone to help your transition goes smoothly.
First thing first, some safety tips.
Know your stock firmware. In this case SM-J710 is the min requirement
Have a stock firmware file downloaded on your PC. There's nothing for US right now, but J710 is not region lock so it matter not which version you chose on Sammobile
Make sure your current and new version match up as much as possible. So J710 should be the first 4 that need to match
Created a Folder on your PC for J710, and organize everything in one place. Samething with phone microSD card
Try to make a habbit out of keeping track of your process. It will help you out alot when things goes wrong and are looking for help. Or if you need to go back and see where you make mistake. Especially useful if you are new at this. Dev can't help you if you don't know what you did yourself.
10min rules. Always give the phone minimum 10 min to boot the first time before you disconnect the battery. Sometimes it just take longer, but 10min is a good start for first booth.
TOOLS you will need.
ODin newest is 3.10, but other version will be fine
Stock USB cable that came with the phone. This will save you the hassle of downloading USB installer, and it makes data transfer from ODin to phone alot safer.
TWRP for J710. right now it's only beta phase, but I beleive its 3.02.
Superuser zip files to be flash upon successful installation of TWRP
BACK UP DATA: With the app you can use ES explorer and back up to you microSD.
With the phone, just plug in to your computer, Copy the phone folder, and create a subfolder on your PC and name it System then paste everything onto that folder. After rooting is done. Re-install the app again, then copy your system folder onto the new system folder of your root phone. Restart your phone, and all your previous login and layout will there the way you left it.
Technically you only need to copy the ANDROID & BACKUP folder for your apps. But the above methods will back up all your media along with apps info, and it alot faster.
I recommend using ES explorer because it will does all the modification for without having to go through TWRP once you have rooted enable. Just enable root, and whatever you want to modify, place it in the correct folder of the phone SYS. Reboot and its done. You won't have to go through TWRP and risk bricking. You can save your modify rom in a zip file and share up here. It like being a developer for dummies.
So before you begin. The number 1 thing you should have is the firmware. SM-J710 from Sammobile. With that being said, I have found 2 links for rooting. They are both similiar process, but the one from XDA is for SM-J710F. and the link from Androidinfo is for SM-J710MN. Depend on your choosing you need to have a backup firmware from the method that you chose.
Now that you have the stockfirmware, and your phone is not the F or MN series. Flash the stock firmware of the method that you chose, and go with the rooting process for that method. here are the links:
XDA Video tutorial http://forum.xda-developers.com/galaxy-j7/how-to/video-root-samsung-galaxy-j7-sm-j710f-t3401790
XDA thread http://forum.xda-developers.com/galaxy-j7/development/recovery-samsung-galaxy-sm-j710f-t3380736
Androidinfotech: http://www.androidinfotech.com/2016/07/root-samsung-galaxy-j7-2016-sm-j710mn.html
This rooting method is working mostly with ODin, odds of you bricking your phone is about the same as winning a lottery. With that being said, make sure everything that you plan on flashing is from J710 and you should be fine.
The J7 is more like an opensource phone from Samsung. It does not have a lot of restriction like the other models such as S series. But you are working with a beta version of TWRP so it might not work out the first time around. If that is the case, flash a different firmware model or wait for a stable version. It not the end of the world if you phone is rooted.
Backtrack to beginning: Flash the stock firmware to begin the process again. WIPING DATA before any process is always a plus.
using ODin: Flash Firmware on "BL" for new version, i forgot which slot it is for the older version
Flash: TWRP and SU on "AP" slot for new version
INTERESTING FACTS: I ran across a thread online that mention backing firmware via Odin is possible. Hopefully someone here on XDA might have an idea on the methods, if such a thing exist. I thought I share this. If only I remember where I ran into that post.
Last notes: During the rooting process, I recommend letting the phone reboot completely as you progress through each phase of the process. the reason for this, is so it will help you identify if the TWRP is not installing, or the kernels is incorrect, or the SU.
Your phone will bootloop if TWRP does not optain write priviledges.
Your kernels will always install, but if TWRP does not have privileges the phone will not boot.
Should you were able to get TWRP, and Kernel to install properly, but fail to get SU to install. You gonna have to play around with other SU version. I would do a TWRP back up should I was able to get it to install, before moving on to SU. This way you won't have to start from the beginning if it doesn't work out.
With that, I leave the rest in your hand. Goodlucks
Vi3tDroidz said:
As I begin rooting process for my J710, and realize that the J710 is still fairly new so I thought I write this post and share my notes with everyone to help your transition goes smoothly.
First thing first, some safety tips.
Know your stock firmware. In this case SM-J710 is the min requirement
Have a stock firmware file downloaded on your PC. There's nothing for US right now, but J710 is not region lock so it matter not which version you chose on Sammobile
Make sure your current and new version match up as much as possible. So J710 should be the first 4 that need to match
Created a Folder on your PC for J710, and organize everything in one place. Samething with phone microSD card
Try to make a habbit out of keeping track of your process. It will help you out alot when things goes wrong and are looking for help. Or if you need to go back and see where you make mistake. Especially useful if you are new at this. Dev can't help you if you don't know what you did yourself.
10min rules. Always give the phone minimum 10 min to boot the first time before you disconnect the battery. Sometimes it just take longer, but 10min is a good start for first booth.
TOOLS you will need.
ODin newest is 3.10, but other version will be fine
Stock USB cable that came with the phone. This will save you the hassle of downloading USB installer, and it makes data transfer from ODin to phone alot safer.
TWRP for J710. right now it's only beta phase, but I beleive its 3.02.
Superuser zip files to be flash upon successful installation of TWRP
BACK UP DATA: With the app you can use ES explorer and back up to you microSD.
With the phone, just plug in to your computer, Copy the phone folder, and create a subfolder on your PC and name it System then paste everything onto that folder. After rooting is done. Re-install the app again, then copy your system folder onto the new system folder of your root phone. Restart your phone, and all your previous login and layout will there the way you left it.
Technically you only need to copy the ANDROID & BACKUP folder for your apps. But the above methods will back up all your media along with apps info, and it alot faster.
I recommend using ES explorer because it will does all the modification for without having to go through TWRP once you have rooted enable. Just enable root, and whatever you want to modify, place it in the correct folder of the phone SYS. Reboot and its done. You won't have to go through TWRP and risk bricking. You can save your modify rom in a zip file and share up here. It like being a developer for dummies.
So before you begin. The number 1 thing you should have is the firmware. SM-J710 from Sammobile. With that being said, I have found 2 links for rooting. They are both similiar process, but the one from XDA is for SM-J710F. and the link from Androidinfo is for SM-J710MN. Depend on your choosing you need to have a backup firmware from the method that you chose.
Now that you have the stockfirmware, and your phone is not the F or MN series. Flash the stock firmware of the method that you chose, and go with the rooting process for that method. here are the links:
XDA Video tutorial http://forum.xda-developers.com/galaxy-j7/how-to/video-root-samsung-galaxy-j7-sm-j710f-t3401790
XDA thread http://forum.xda-developers.com/galaxy-j7/development/recovery-samsung-galaxy-sm-j710f-t3380736
Androidinfotech: http://www.androidinfotech.com/2016/07/root-samsung-galaxy-j7-2016-sm-j710mn.html
This rooting method is working mostly with ODin, odds of you bricking your phone is about the same as winning a lottery. With that being said, make sure everything that you plan on flashing is from J710 and you should be fine.
The J7 is more like an opensource phone from Samsung. It does not have a lot of restriction like the other models such as S series. But you are working with a beta version of TWRP so it might not work out the first time around. If that is the case, flash a different firmware model or wait for a stable version. It not the end of the world if you phone is rooted.
Backtrack to beginning: Flash the stock firmware to begin the process again. WIPING DATA before any process is always a plus.
using ODin: Flash Firmware on "BL" for new version, i forgot which slot it is for the older version
Flash: TWRP and SU on "AP" slot for new version
INTERESTING FACTS: I ran across a thread online that mention backing firmware via Odin is possible. Hopefully someone here on XDA might have an idea on the methods, if such a thing exist. I thought I share this. If only I remember where I ran into that post.
Last notes: During the rooting process, I recommend letting the phone reboot completely as you progress through each phase of the process. the reason for this, is so it will help you identify if the TWRP is not installing, or the kernels is incorrect, or the SU.
Your phone will bootloop if TWRP does not optain write priviledges.
Your kernels will always install, but if TWRP does not have privileges the phone will not boot.
Should you were able to get TWRP, and Kernel to install properly, but fail to get SU to install. You gonna have to play around with other SU version. I would do a TWRP back up should I was able to get it to install, before moving on to SU. This way you won't have to start from the beginning if it doesn't work out.
With that, I leave the rest in your hand. Goodlucks
Click to expand...
Click to collapse
I Root the Device but After root there were many issues..... I Keep on getting an notification that unauthorized action ...
and also my device keeps lagging it lags just for a second but this games every 2-3 mins
I also freezed KNOX with lucky patcher but the problem still persists any meathod to solve the problem Thanks
Thanks
Sent from my SM-J710MN using Xparent BlueTapatalk 2
I posted this as a reply originally. Then thought it probably should be a thread so it can help as many people as possible! Let's get the custom kernels and ROMs going for this beautiful device!
You will need to already have Android 20A (C should be fine as well) stock image installed, and the bootloader unlocked [Plenty of easy help via Google won't cover that here]
You can use the Recowvery Method on 20A (Nougat) (again this should be the same for 20C) with the H830. Below is the script I used with supersu and no-verity script included. Plug-in the device to your Windows machine. Install LG drivers, and remember to unlock screen and authorize the computer via the Device's screen so ADB commands can run (unnecessary tech note: you could open command prompt cd to where this is and use it's ADB to run adb devices (if you don't understand that no worries skip it)). After that just run the script and follow the menus. Answer yes when asked if you're sure you wish to continue, and done. I hope you find my work helpful .
I used this guy's script [Easy Recowvery ALL CREDITS TO THE AUTHOR I'M JUST SUPPLYING AN H830 SPECIFIC PACK WITH NEEDED FILES THAT I VERIFIED FULLY WORK. PLEASE GO RATE HIS THREAD AND CLICK THANKS IF THIS WORKS FOR YOU!]: http://forum.xda-developers.com/v20/development/h918-recowvery-unlock-v20-root-shell-t3490594
DON'T FORGET
This should work granted you have the drivers installed, and Windows has finished installing them, you tapped the prompt on your device screen to allow the adb connection, and you run script as administrator, and you restart the computer if you run adb commands yourself and aren't comfortable checking task manager to kill any and all running adb instances (could also issue the stop server command too), but if unsure of any or all of that last statement, restart
Of note answer yes when it says this isn't a V20 are you sure you wish to continue?. Also, as stated in notes I had to actually run it twice for it to stick for me (I'm sure I rushed the first time or something).
I took the time to create an H830 package of the script version with the files that worked for me. Out of respect I changed nothing aside from adding the needed files and throwing quick notes in the readme.md (bottom of file) file. (PLEASE read it, if you have issues read it you missed something). You will also still need to type yes when it states this is not a V20; Do you wish to continue? <Yes>.
. I used this package to root my H830 after the Nougat OTA killed my root access so
SHOULD WORK ON ANY H830 RUNNING STOCK 20A (should work with 20C) [NOUGAT] Read the following paragraph if you skip the rest
Read the readme.md file found in root of archive (see bottom of file).
Start it up hit like 5 for TWRP and supersu (or there's another menu option for just supersu or just TWRP whatever you desire).
Answer yes to the prompt to continue.
Now wait for the magic (again not mine this is the authors work)).
Once done you can download a reboot to recovery app or widget (or root checker) and verify that you're good to go.
If it doesn't take the first time you may need to run it again. DON'T FREAK OUT, RUN SCRIPT AGAIN IT CAN TAKE MULTIPLE RUNS.
Don't forget to install BusyBox (Stericson installer recommended and I use /su/bin personally (/su/xbin should also be fine) Since we're talking stock here generally I like to minimize any changes to /system if it can be helped personally; so I haven't tried running BusyBox from any /system mount) as this is a stock ROM.
Kernel Adiutor works and yes I recommend leaving thermald enabled as your thermal governor unless you flash a custom kernel (not included)
Manual Boot to Recovery:
Start With phone off (pinch battery button and re-insert battery if you can't otherwise shut it down or are lazy like me )
Hold both Power AND Volume Down at same time
1-2 seconds in to seeing LG Logo release and hold power button while continuing to hold volume down the entire time...
Release once you see white screen prompting yes or no to wipe user data (don't freak) ¹
use volume key to highlight yes
Hit Power key (think enter)
¹(If you have factory recovery this WILL format all user data and settings you've been warned. Only way to boot to stock recovery is to use app, widget, or terminal/adb command (reboot recovery). I don't know of any manual physical button methods to access stock recovery directly.).
You should now see TWRP Loading and can release any keys if you're holding any down still (once white wipe screen is seen you should release the keys)
Sweet, the file is small enough to be attached to this post directly, Enjoy! Also it's a 7-zip archive. It's available for every OS. For Android if you use ES File Explorer the first time you try to use a 7z file it'll offer to download plug-in, and you're good to read/write 7z archives (best compression almost always imho).
It doesn't seem to work for me, it reboots and the little android says No Command. Any suggestions?
well I ran the script ,Im afraid what was happening earlier is happening here to,when the script tries to flash Supersu it reboots to Firmware Update screen,Im fairly certain thats not right...am I correct? Gonna try to pull out (lol) before that screen loads like I did with the other method...
Ahhh I miss being able to root without a PC. I don't own one ?
Can anyone confirm this works fine? I won't have time for troubleshooting if it doesn't..
Jonathanpeyton said:
well I ran the script ,Im afraid what was happening earlier is happening here to,when the script tries to flash Supersu it reboots to Firmware Update screen,Im fairly certain thats not right...am I correct? Gonna try to pull out (lol) before that screen loads like I did with the other method...
Click to expand...
Click to collapse
Sounds like your hope would be if someone made a tot with root for 20A
shaneg79 said:
Sounds like your hope would be if someone made a tot with root for 20A
Click to expand...
Click to collapse
unfortunatley, I think that may be the only way Ill ever get my oddball device to accept TWRP....
WiiR0cKz said:
It doesn't seem to work for me, it reboots and the little android says No Command. Any suggestions?
Click to expand...
Click to collapse
same issue i turned off integrety check and ran it again it worked fine
Alpha_wolf said:
same issue i turned off integrety check and ran it again it worked fine
Click to expand...
Click to collapse
Where did you find integrety check
Sent from my LG-H830 using Tapatalk
Hi, thanks you for this post. I tried to use this script and I got an error saying that I am missing files in the "exploit" directory...please see the attached screenshot. Any ideas? Thanks.
famous145 said:
Where did you find integrety check
Sent from my LG-H830 using Tapatalk
Click to expand...
Click to collapse
hit 5 in the main screen it should be there
Can someone please help me unlock my bootloader now that I am running nougat! TIA fellow peeps!
Is this working for everyone / anyone? Most posts so far seem to have issues...
Alpha_wolf said:
hit 5 in the main screen it should be there
Click to expand...
Click to collapse
I did this but am still getting the no command issue
This method worked for me after about 5 failed attempts. The OP guide is not very clear, I might write my own and post it today.
aanonymoushuman said:
This method worked for me after about 5 failed attempts. The OP guide is not very clear, I might write my own and post it today.
Click to expand...
Click to collapse
Please!
When you say failed, did you get the no command issue as well,or something different?
Dumboguy03 said:
Please!
When you say failed, did you get the no command issue as well,or something different?
Click to expand...
Click to collapse
I did get the no command issue in recovery, the first time I did it, disabling integrity verification solved the problem when I did my next time, but I got some other issues before this solution worked.
My problem is, i am on Mac in parallels i can't list my phone in adb devices command. it shows as empty. Installed every possible app scenarios but still looks empty
Check out my guide on rooting Nougat, https://forum.xda-developers.com/lg-g5/how-to/guide-root-stock-n-using-jcadduonos-t3529093
Can confirm this does work. Took me 30 tries but it worked!
Preamble
Hello, all.
Soooo I've never posted on this forum before. I've mainly leeched the invaluable info for my personal gain. I'm sure many a googler has come here trying to figure out how to root their phone. And I'm sure many a "swimmer" in Schitz Creek has come here via Google to figure out how to save their device from what had been perceived as an upgrade. I'm speaking, of course, of trying to root/unlock a phone and finding said phone "bricked".
Well, it’s time to give back.
Because yesterday, I was neck deep in Schitz Creek. After a series of dumb decisions and a lack of knowledge, I bricked the phone I’d bought for my wife’s birthday. I was just trying to be able to delete the Asus bloatware and install titanium backup and greenify. By the way, since when did Facebook become a system app? How is this a thing? Anyways, my wife deserves better battery life. And it’s fun to feel like Cyber MacGuyver by rooting a phone. But the situation went awry. My wife kept telling me that everything was going to be alright, but I know the limitations of my knowledge.
Brief aside: I'm decently computer/phone savvy, but I would, in no way, consider myself an advanced user. Sure, to my family, I'm a computer wizard. But that doesn't mean a whole lot. To them, opening up a command prompt in Windows is seen as an act of magic. And I haven't had my planeswalker spark yet. However, I have successfully rooted, and in most cases unlocked the bootloader, for several phones (HTC desire, Galaxy S3 [three different models over three years], Asus Zenfone 5, LG G4 [once pre-motherboard-death and once post (after a downgrade)], and now the ZE552KL). So I know how to at least fumble my way around adb, fastboot, odin, and various recoveries. As long as you’re at this level, or willing to learn, then you should be able to follow these instructions. End aside.
Mistakes not to make
Let’s get down to brass tacks. I made two big mistakes that you shouldn’t make. Both mistakes stemmed from the basic mistake of using a root method other than this one: https://forum.xda-developers.com/zenfone-3/help/guide-how-to-root-zenfone-3-ze552kl-t3471524
The problem with not using this EXACT method is that some of the files/programs which you need to use have specific versions which will ensure an easypeasy root. Honestly, if you properly follow the instructions in the above post, you will most likely not run into any problems. The only addition I can make is that instead of steps 6 and 7, you might find it easier to install SuperSU.zip through TWRP instead of pushing and sideloading.
Mistake 1: Not using the proper TWRP file and SuperSU file
For some reason, there are multiple versions of these files. Your SuperSU file should be 4.8MB. Using the wrong SuperSU will break the dm-verity. Your TWRP should NOT be the latest experimental version. It should be the one from November or earlier of 2016. Using the wrong TWRP will leave you unable to use the touchscreen. Trust me. I know from experience.
Mistake 2: KEEP TWRP READ ONLY
Disabling read only has no current benefits. It will just break the dm-verity. Your device will still be able to be written to if you keep TWRP read only. I have no idea why it’s called “read only”.
How to unbrick the phone
I’m sure some of you skipped straight to here. While I can’t blame you, please at least read the above paragraph. It will help you.
First I will describe the situation the phone was in, and then I will explain how I saved it. Before I continue, I want to give a big shout out to Niemer. Without their helpful post, I would’ve had no idea what to do. Thanks!
Situation the phone was in
--TWRP could not be used because the touchscreen wasn’t working.
--The dm-verity was messed up (i.e. “not started in enforcing mode").
Before you look at the solutions, make sure that your phone shows up in the windows device manager as an ADB device/ASUS ADB device/ADB composite device/etc. no matter which step you’re in. Google it to figure out how if you don’t already know.
The solution
Part 1 - Create and flash a system image which will restore your dm-verity
step 1. download the latest system “update” from the asus drivers website. I have a WW version of the phone, so I downloaded “WW_V13.20.10.152”. It’s a 1.76GB file, so be patient. I haven’t tested this method with other versions of the phone, but they should work in theory.
step 2. go into the updater script file (META_INF → com → google → android → updater-script). Open it with notepad ++.
step 3. delete from the beginning of the file up until the line “ui_print("Target: asus/WW_Phone/ASUS_Z012D:6.0.1/MMB29P/13.20.10.152-20161222:user/release-keys");”
The code that you are deleting checks to make sure that your phone is the proper model. But there is a good chance that it will mistakenly identify your phone as a phony. So we need to get rid of this code.
step 4. save the updater-script file
step 5. create a copy of the modified system update zip file. You should now have two 1.76GB files (or maybe slightly different if your phone is a CN, JP, or other model. Once again, I have a WW version of the phone). Name one of the files “realupdate.zip” and name the other “dmsaver.zip”. The names aren’t actually important.
step 6. enter dmsaver.zip. delete these four files: file_contexts, system.new.dat, system.patch.dat, and system.transfer.list. Exit out of the file. It should now be about 60MB.
step 7. turn on your ZE552KL and enter fastboot mode
step 8. in a cmd screen from your main folder (i.e. the one with adb, fastboot, and all the other files, including the ones you just created), type in the command “fastboot flash system dmsaver.zip”
step 9. if successful, you have just restored the dm-verity. You should now no longer get that sinister red text which has been ruining all your fun.
Part 2 - Install a proper version of TWRP
(This is only important if your version of TWRP won’t let you do anything because you can’t use your touch screen)
Download the version of TWRP that is included in the how-to-root post I linked to above. Also, you can download the oldest version (NOT the newest) from a sharing website which is linked to in a post on the ASUS website. It’s not in english though. Flash it to your phone in fastboot mode using the “fastboot flash recovery” command. Make sure you turn your phone off before turning it back on, or your recovery might not activate correctly.
Part 3 - Install a new version of your system.
Go into TWRP and install the zip file “realupdate.zip” that you created in Part 1 - step 5.
Part 4 - Root your phone
Follow the instructions in the link I posted earlier. It comes from this website, so you know it’s good. This time, though, you probably don’t need to unlock the bootloader
Part 5 - Breathe a sigh of relief
Parting words
I really hope this guide can be of assistance to you. The full procedure for fixing “my” phone wasn’t really recorded anywhere (although once again, big shout out to Niemer for their post). I went through hundreds of iterations of seemingly random fastboot, recovery, and adb actions before everything worked out. Because of this, I feel quite fortunate to have saved the phone, and I really wanted to give back. This community has been super helpful to me over the last seven years, and this is my chance to reciprocate. I sincerely hope that this post will help you.
I hope I didn’t forget anything. I have a sneaking suspicion that I did. In any event, if you have any questions, please post them, and I’ll try to be of assistance. Happy rooting!
thank you man but i start Part1 step8 "fastboot flash system dmsaver.zip" it's successful then i go into TWRP and install the zip file “realupdate.zip” dm-verity show again.
Thank again.
Raw firmware
I have the same issue. My phone was branded "tim italy". When i bought it, I flashed the WW version via asus flash tool, and I'm currently able to update till the last M version, which is the ......152.
If i try to update to Android N, my phone will not boot, giving me the corruption message and shutting down after 10 seconds. I also tried to perform the dm restore procedure; the dm error disappeared but the system is stuck on the Asus boot screen
I believe that the only solution is to flash a Nougat RAW firmware via asus Flash tool. Does Anyone have a download link for the N version ?
thank you, you helped me, now im on N
I guess the version matters then. So be careful with which firmware you download/install. If anyone has success with other versions, please share how you did it
I am stuck on Step 8. i put the 2 zips in where my adb and fastboot is located, and then proceed to type 'fastboot flash system...' and then it wont let me flash, any help?
Device Locked
When I flash the dmsaver.zip, receive the error "FAILED (remote: not allowed in locked state)". Apparently this with the bootloader locked, but I already unlocked before. Someone can help me unlock the bootloader again?
Further hyperlinks & solution ideas
Check out my solution and Ideas in those in links I posted in this thread at 4th of septembre 2017:
https://forum.xda-developers.com/ze...-zenfone-3-zoom-ze553kl-t3657239#post73661437
The hyperlinks in my post might also be useful, I hope.
Would be glad about your feedback, if it helped! :good:
how do you update the script file ..can u just post the file that u made somehow or email it or attach it to a message?
cant get it to work followed the instructions still getinf error code 7 trying to install lineage os
If you have lineage OS version not is a zip file but all the images (boot.img, system.img, ...) then you could try to flash the images through ADB...
if someone have the no verity issue, can you try a method for me please?
it consists on:
re-flash the rom kernel via fastboot
and run:
Code:
fastboot oem reset-dm-verity
Followed all the steps and twrp still has no touch function.
Tried all different twrp versions.
OS Version is a key
Hi everybody that has the same issue, I hope you read that so you can fix your problem.
So what I did was downloading old version of OS that autor mentioned "WW-13.20.10.152". It is necessary to download this version even if there are more newer versions. Then follow tutorial and you should be fine.
So again, thanks OP for posting this. You helped me a lot!
Ok guys, new here and I've done a bit of reading on this already. From what I gather, the S7 Edge is difficult if not impossible to unlock without a factory reset. Here's the issue.
This phone belongs to my friend's husband who was severely injured in an accident at work. He's in a coma and probably won't survive. He was severely burned over 90% of his body with chemicals and he has no fingerprints to unlock the fingerprint scanner. In addition, his wife doesn't know his password, so I figured I'd see if I could do anything for her. I tried the Dr. Fone program, but it's apparently incompatible with the S7 Edge. He keeps getting texts and messages and we can't check them. The phone is also set for a daily alarm at 1:30 AM, and apparently you can't power it down without the lock code either. Ideally, I'd like to either gain access for her or at least extract what data we can from the thing before factory resetting it. It would also be nice to power it down so that it doesn't keep putting out an alarm every night in the middle of the night. All his contacts with his family are inconveniently stored in the phone as well. It's kind of a worst case scenario.
Any assistance or recommendations for a course of action for this situation would be fantastic. I don't have any other information on the device itself other than that it's running on Freedom Mobile's network in Ontario, Canada. They've said they can factory reset it for her, but we were trying to avoid that and get any contacts or messages from his phone if possible.
Thanks in advance for any help! I know it's a long shot!
Edit: I managed to power down the phone with the Power Button/Volume Down trick after about 9 tries, so at least the alarm won't go off. Other than that, no luck.
Unique situation? More like fked up situation.
Anyways I am assuming its a completely stock phone with USB debugging turned off. Hope its not carrier locked, if yes then here are the steps:
1. Flash Custom Recovery on the Phone using Odin
2. Use aroma file manager from the Recovery, you need to download it separately, put it on its SD card.
3. Now using aroma file manager navigate to Data Folder and then; System Folder and find “gesture.key” or “password.key” for pattern lock or password lock respectively.
4. Delete those any password related file and reboot. It should be unlocked now.
Thanks VERY much, UnNaMeD__!!!
I'm looking at Odin and the Recovery firmware right now. Is there a recommended version? I see TWRP and CWM, but primarily TWRP mentioned, and it looks like the .tar files are easy to find. I'm pretty new to this type of mod and I don't want to brick the phone, I know it's a risk. I'm looking at faqs on theandroidsoul and the cyanogenmods forum which seem quite thorough. Apparently I can't post the links as I'm a new user here....seems fair I suppose, especially considering the forum content.
My friend's husband didn't have a microSD card in (just checked), but I can toss a spare one of mine in for Aroma, which I found. I probably need for format it for FAT32, not NTFS though? Is there any way to tell if it's carrier locked? It's from a small phone company, not one of the bigger guys. I'm going to wait until I hear back to get started on this, as I'm decent with Windows based systems, but unfamiliar with the nuances of modding Android. I use a stock Sony XZ Premium myself.
Again, thanks very much! I've got some hope we can get in touch with his family now!
UnNaMeD__ said:
Unique situation? More like fked up situation.
Anyways I am assuming its a completely stock phone with USB debugging turned off. Hope its not carrier locked, if yes then here are the steps:
1. Flash Custom Recovery on the Phone using Odin
2. Use aroma file manager from the Recovery, you need to download it separately, put it on its SD card.
3. Now using aroma file manager navigate to Data Folder and then; System Folder and find “gesture.key” or “password.key” for pattern lock or password lock respectively.
4. Delete those any password related file and reboot. It should be unlocked now.
Click to expand...
Click to collapse
maxlords said:
Thanks VERY much, UnNaMeD__!!!
I'm looking at Odin and the Recovery firmware right now. Is there a recommended version? I see TWRP and CWM, but primarily TWRP mentioned, and it looks like the .tar files are easy to find. I'm pretty new to this type of mod and I don't want to brick the phone, I know it's a risk. I'm looking at faqs on theandroidsoul and the cyanogenmods forum which seem quite thorough. Apparently I can't post the links as I'm a new user here....seems fair I suppose, especially considering the forum content.
My friend's husband didn't have a microSD card in (just checked), but I can toss a spare one of mine in for Aroma, which I found. I probably need for format it for FAT32, not NTFS though? Is there any way to tell if it's carrier locked? It's from a small phone company, not one of the bigger guys. I'm going to wait until I hear back to get started on this, as I'm decent with Windows based systems, but unfamiliar with the nuances of modding Android. I use a stock Sony XZ Premium myself.
Again, thanks very much! I've got some hope we can get in touch with his family now!
Click to expand...
Click to collapse
Use odin 3.13 the latest
Then download twrp recovery 3.2.2.0 tar file for hero2lte the latest.
Boot your phone into odin mode by restarting your phone while holding power home button and vol down. When your reach the confirmation screen press OK.
Open odin and put the tar file in the ap slot and click the ap box and hit start to begin flashing.
Now restart ur phone by holding power home and vol down then immediately hold power home vol up to reach custom recovery.
Edit I just tested this myself
Flash the zip file from this thread no need to go looking for files in system.
https://forum.xda-developers.com/showthread.php?t=2780696
Should remove password pin or pattern.
To check if it's network locked just look at the back of your phone if it says 935u or Verizon wireless or 935W8 then the phone is unlocked for different networks.
maxlords said:
Thanks VERY much, UnNaMeD__!!!
I'm looking at Odin and the Recovery firmware right now. Is there a recommended version? I see TWRP and CWM, but primarily TWRP mentioned, and it looks like the .tar files are easy to find. I'm pretty new to this type of mod and I don't want to brick the phone, I know it's a risk. I'm looking at faqs on theandroidsoul and the cyanogenmods forum which seem quite thorough. Apparently I can't post the links as I'm a new user here....seems fair I suppose, especially considering the forum content.
My friend's husband didn't have a microSD card in (just checked), but I can toss a spare one of mine in for Aroma, which I found. I probably need for format it for FAT32, not NTFS though? Is there any way to tell if it's carrier locked? It's from a small phone company, not one of the bigger guys. I'm going to wait until I hear back to get started on this, as I'm decent with Windows based systems, but unfamiliar with the nuances of modding Android. I use a stock Sony XZ Premium myself.
Again, thanks very much! I've got some hope we can get in touch with his family now!
Click to expand...
Click to collapse
Just look at back of your phone and tell me its model, Like G935F. I will give you the correct recovery file. And recoveries have option to enable storage too so you can access data from computer. But to be honest it never worked for me. You could also give it a try before doing other steps.
You could contact on PM, or even better I could also help you over whatsapp if you wish.
And I never heard that you could brick phone by flashing recovery, maybe only if you flash incorrectly. A bad recovery will make recovery useless, but phone would still boot. Thats my experience.
I have broken password before of a Mediatek device. If you want I could try it on my own S7 Edge too to be 100% sure.
I'll send you a PM as well, but I just checked and it's a G935W8. Sorry for the delay, I work shift work and I'm pretty busy. I'm going to work on the phone on the weekend. I don't have Whatsapp currently, but I can get it. Thanks again for your kindly assistance!
UnNaMeD__ said:
Just look at back of your phone and tell me its model, Like G935F. I will give you the correct recovery file. And recoveries have option to enable storage too so you can access data from computer. But to be honest it never worked for me. You could also give it a try before doing other steps.
You could contact on PM, or even better I could also help you over whatsapp if you wish.
And I never heard that you could brick phone by flashing recovery, maybe only if you flash incorrectly. A bad recovery will make recovery useless, but phone would still boot. Thats my experience.
I have broken password before of a Mediatek device. If you want I could try it on my own S7 Edge too to be 100% sure.
Click to expand...
Click to collapse
maxlords said:
I'll send you a PM as well, but I just checked and it's a G935W8. Sorry for the delay, I work shift work and I'm pretty busy. I'm going to work on the phone on the weekend. I don't have Whatsapp currently, but I can get it. Thanks again for your kindly assistance!
Click to expand...
Click to collapse
Hey alright no problem.
Download TWRP for G935W8 from official TWRP website:
https://teamw.in/samsung/samsunggalaxys7edge.html
You can follow some instructions from this thread regarding flashing:
https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084
Flashing TWRP might cause your phone to not boot. You will need to download dm-verity disabler from the thread above.
So download TWRP, Aroma file manager, dm-verity bypass, and zip file to disable pass that the other user posted: https://forum.xda-developers.com/showthread.php?t=2780696
Download all these files and put aroma file manager, dm-verity bypass and that password zip file bypass on your SD.
Make sure auto reboot is disabled in odin, follow instruction in thread about how to install twrp. If the auto reboot is disabled, phone will just remain at the same screen, so after the flashing is done from odin. You need to force reboot on your phone (volume down + power button for few seconds), just when the screen goes off, you need to immediately press recovery button combination (vol up + home + power). Here once you enter TWRP recovery see if you can enable MTP and trasnfer data to PC, if not, goto install zip and try password bypass zip file. If it works file then ok and proceed to install dm-verity bypass file and reboot your phone. If that zip doesn't works. You need to go to same install zip file option and now install aroma file manager. From there delete the password files that I told you about earlier, flash dm-verity and reboot again.
Thats it, if get confused about a step, tell me.
Well, I attempted to install TWRP through the latest version of Odin, but it didn't work. The error message I got in Recovery/Download mode was:
"Custom Binary (RECOVERY) Blocked By FRP Lock."
I looked that up online and apparently to install TWRP, I need to remove the FRP lock. I found a program called RealTerm which can supposedly bypass the FRP lock, but it doesn't seem to be connecting to the locked phone and it's not exactly user friendly.
Am I missing something here? Or is there no way to bypass the FRP lock on the unit?
Hi. I'm just gonna say this first: I didn't know entirely what I was doing when beginning this operation. I was just trying to do something fun and new, and it didn't pan out. I fully acknowledge that I am an idiot.
Now, the story. I was attempting to root my LGV20 with this guide: https://forum.xda-developers.com/v20/how-to/root-h910-v10m-t3664500 .
I have read over this thread more times than countable and thought I was doing everything correctly. I got to the "STEP3.BAT" portion of the guide and long story short, my phone crashed during it and somehow got foobarred.
It *kinda* works (as in it will boot for around a minute) and then blue/black screen into a reboot.
Is there any way I can save this phone? Hard resets, going into software, more dumb computer stuff, anything. I don't *need* to get this phone working again but it would be really preferable.
Simultaneously I fully accept the responsibility in failing the operations. I know that somewhere I must have messed up. If no-one wants/ can help me, tell me so. Just means new phone time.
If any more detail on what happened is needed, tell me.
First off: that guide is ONLY for the H910 (AT&T) variant, so make sure with your model
and also, when you said a "blue or black screen" it also has very small writings too, right? If so, then you may have faced a kernel/bootloader panic
Technically your phone is *still* alive, and your best method is to start over again, assuming if you read the whole guide carefully then you have backed up your firmware and can still access download mode.
Flash your stock firmware back (or use the H915 firmware provided by the guide), wipe and setup your phone again, then root the phone again.
I also suggest replacing the TWRP recovery inside the provided Dirtysanta folder cuz that's what i did when i faced the kernel panic
MEMO#22 said:
First off: that guide is ONLY for the H910 (AT&T) variant, so make sure with your model
and also, when you said a "blue or black screen" it also has very small writings too, right? If so, then you may have faced a kernel/bootloader panic
Technically your phone is *still* alive, and your best method is to start over again, assuming if you read the whole guide carefully then you have backed up your firmware and can still access download mode.
Flash your stock firmware back (or use the H915 firmware provided by the guide), wipe and setup your phone again, then root the phone again.
I also suggest replacing the TWRP recovery inside the provided Dirtysanta folder cuz that's what i did when i faced the kernel panic
Click to expand...
Click to collapse
Thanks so much. Freaked out over this for a good bit. Came back, did what you said and we're back at that step fully working. Life saver.
Now my first guess as to why step3 failed is that i didn't have the latest version of TWRP. How can I set that up?
Inside the root package folder you can see an .img file named twrp 3.0.2-1- us996.img
What i did was downloaded a later version
(not latest cuz my phone won't boot at the latest version for some reason), copied the name of the original twrp and renamed it, paste it to the folder, overwrite the old one, and try to root it again
MEMO#22 said:
Inside the root package folder you can see an .img file named twrp 3.0.2-1- us996.img
What i did was downloaded a later version
(not latest cuz my phone won't boot at the latest version for some reason), copied the name of the original twrp and renamed it, paste it to the folder, overwrite the old one, and try to root it again
Click to expand...
Click to collapse
Alright, i've done that now too. Thanks. Is there anything else i should/need to keep in mind to ensure failure is not going to happen? I want to make 100% sure I get everything right this time.
reptarien said:
Alright, i've done that now too. Thanks. Is there anything else i should/need to keep in mind to ensure failure is not going to happen? I want to make 100% sure I get everything right this time.
Click to expand...
Click to collapse
No i don't think there is more things to do, the guide you're following is pretty much straightforward already.
100% guarantee is always a stretch here in XDA. But if you're still facing problems you can ask for help on that guide's thread.
MEMO#22 said:
No i don't think there is more things to do, the guide you're following is pretty much straightforward already.
100% guarantee is always a stretch here in XDA. But if you're still facing problems you can ask for help on that guide's thread.
Click to expand...
Click to collapse
I really want to give up on this. This time I successfully made it through all Step 3, but I also noticed that my screen was kind of glitched and not rendering properly at that stage. After it rebooted, I unplugged my micro usb cable and it gave me an angry green warning message I will attach here.
If you/someone can tell me what to do with this message from here or instruct me on how to flash stock H910 10 q back onto the phone without doing TWRP (since i'm evidently incapable of installing it) I would be most appreciative.
Slightly better picture without anything cut off.
reptarien said:
I really want to give up on this. This time I successfully made it through all Step 3, but I also noticed that my screen was kind of glitched and not rendering properly at that stage. After it rebooted, I unplugged my micro usb cable and it gave me an angry green warning message I will attach here.
If you/someone can tell me what to do with this message from here or instruct me on how to flash stock H910 10 q back onto the phone without doing TWRP (since i'm evidently incapable of installing it) I would be most appreciative.
Click to expand...
Click to collapse
The screen glitching is normal, the green text after boot however is somehow not.
Sad to hear that it still didn't work, there something seems to be interrupting the process of rooting your phone. I dunno if it has something to do with ARB (anti rollback) preventing you to root
If you want to go back to your stock firmware that you backed up, you can:
-Carefully flash each file of your backed up firmware through adb and fastboot mode
-build a zip file of your firmware and flash through TWRP (since it didn't succeed tho)
MEMO#22 said:
The screen glitching is normal, the green text after boot however is somehow not.
Sad to hear that it still didn't work, there something seems to be interrupting the process of rooting your phone. I dunno if it has something to do with ARB (anti rollback) preventing you to root
If you want to go back to your stock firmware that you backed up, you can:
-Carefully flash each file of your backed up firmware through adb and fastboot mode
-build a zip file of your firmware and flash through TWRP (since it didn't succeed tho)
Click to expand...
Click to collapse
Could you reply with any links with a tutorial on how to do the first thing? Or describe it. Sorry for being so dumb i'm a total newbie lol
reptarien said:
Could you reply with any links with a tutorial on how to do the first thing? Or describe it. Sorry for being so dumb i'm a total newbie lol
Click to expand...
Click to collapse
Unfortunately i can't find any guides when it comes to flashing the back up.
I did read something back then on turning it into a zip file, but even if you can build one you still need TWRP, in which case you haven't successfully installed, so that's no option
Flashing the backup files requires specific commands, especially to the part on what partition should it be flashed to
When LGUP backs up your phone's firmware, you can see a vast number of files(i can't remember how were they named, I'll look up a reddit post about it)
The files where named based on what partition it came fom (H910_modemxx_COM12, H910_system_COM12 or something like that)
These are image files, what i did as far as i can remember was rename these files by adding an IMG extension for ADB to recognize
Flash them according to it's partition name:
"Fastboot flash system H910_system_COM12.img"
"Fastboot flash recovery H910_recovery_COM12.img'
Etc.
To go to fastboot, turn off your phone and hold the volume down button , then plug your phone to the PC.
But i really cannot guarantee this, because for all i know, in order to flash this you need fastboot, and to get fastboot you need to root your phone, because only the engineering bootloader has it (i'm sorry if it's wrong tho), and flashing these files to fastboot might be a bit dangerous because it will not verify the files, there may be chances that you might flash a corrupted file. so flashing via LGUP is the safest option so far if you don't know what you're doing