Database Users

Official ICS for GT-P7510

Hello.........
Can any one in UK or Italy make the official update available for the rest of us?
Sent from my GT-P7510 using XDA Premium HD app

lost about 200MB of RAM after installed

nttuananh said:
lost about 200MB of RAM after installed
Click to expand...
Click to collapse
Oh the horror.

quite fast i will say. occasional glitches due to RAM take over

I got my update via Kies yesterday on my P7510 in the UK. No problems with it yet..... It seems faster and the colours seem crisper and more vivid :laugh:

Why not flash the update through Odin? If you are on stock..just download the rom from samfirmware.com, select it in PDA in Odin and go go go..
It's how I did in Dutchieland
Sent from my Galaxy Nexus using xda premium

BuddyJoe83 said:
Why not flash the update through Odin? If you are on stock..just download the rom from samfirmsare.com, select it in PDA in Odin and go go go..
It's how I did in Dutchieland
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I am also on stock rom. Did you root ur device or did you install any recovery to flash ur tab with 4.04
Thoug i am quite comfortable with odin, I am unable to get my device into download mode by pressing the volume down key and power key combo.
Kindly guide me.

krunalkamdar said:
I am also on stock rom. Did you root ur device or did you install any recovery to flash ur tab with 4.04
Thoug i am quite comfortable with odin, I am unable to get my device into download mode by pressing the volume down key and power key combo.
Kindly guide me.
Click to expand...
Click to collapse
I was rooted before and had installed JellyBean on the tab.
I reflashed an official stock rom (3.2 Honeycomb) through odin and repartioned in Odin. I followed the guide down on this page:
http://www.teamovercome.net/p7500/?page_id=5 to get back to stock.
Since you are already on stock you don't need that.
But you will have to press left volume button first, then together with power and keep holding it 'till you get in the screen where you can get into download mode...it's the option on the right.
Then connect through usb to pc, pc has odin (v1.85 works for me) open and then just open the extracted file from samfirmware.com in PDA and press start.
Sent from my Galaxy Nexus using xda premium

Updated to ICS through OTA @Dubai...

US P7510
Anybody verify that the odin flash works on the US version of the tablet?

scorpiorc10 said:
Anybody verify that the odin flash works on the US version of the tablet?
Click to expand...
Click to collapse
Yes, it does.

scorpiorc10 said:
Anybody verify that the odin flash works on the US version of the tablet?
Click to expand...
Click to collapse
Yes it does. And after I modified build.prop to change it from region code GB to US and then modified the wifi file to open up the 5ghz band.

DanielNTX said:
Yes it does. And after I modified build.prop to change it from region code GB to US and then modified the wifi file to open up the 5ghz band.
Click to expand...
Click to collapse
how did you do that?

serosis said:
Yes, it does.
Click to expand...
Click to collapse
yeah it does. I just flashed by odin and all works well. I dont know what this change build file to 5 ghz means...........neither do i feel the need to do anything to the tab..Everything works just fine.

scorpiorc10 said:
Anybody verify that the odin flash works on the US version of the tablet?
Click to expand...
Click to collapse
scorpiorc10 said:
how did you do that?
Click to expand...
Click to collapse
You have to root it. And then I used Root Explorer to do the edits...
/system/build.prop
Look for:
ro.product.locale.region=GB
Change it to:
ro.product.locale.region=US
/system/etc/wifi/nvram.txt
Look for:
ccode=GB
Change it to:
ccode=ALL
No need to modify nvram_net.txt_us because it's already correct.

thanks
DanielNTX said:
You have to root it. And then I used Root Explorer to do the edits...
/system/build.prop
Look for:
ro.product.locale.region=GB
Change it to:
ro.product.locale.region=US
/system/etc/wifi/nvram.txt
Look for:
ccode=GB
Change it to:
ccode=ALL
No need to modify nvram_net.txt_us because it's already correct.
Click to expand...
Click to collapse
awesome thanks
sorry for all the dumb noob questions but what you do gain my doing this I see the 5hz is obvious!

shaheerali said:
Updated to ICS through OTA @Dubai...
Click to expand...
Click to collapse
With arabic support.?
Sent from my GT-P7500 using xda app-developers app

hoss_n2 said:
With arabic support.?
Click to expand...
Click to collapse
No Arabic support...

I've flashed task's ROM based on this firmware yesterday and it's fast and smooth, better battery life for sure.
I left it with 100% this morning (8am) , found it at 100% when i came back home 5 minutes ago !

Yes!
scorpiorc10 said:
Anybody verify that the odin flash works on the US version of the tablet?
Click to expand...
Click to collapse
Yes, it works! Just make sure you have the right file downloaded and flash it with Odin, via the PDA. If it freezs at the samsung screen after loading the file on, then go into recovery and wipe data factory reset and then restart. your gold!

HELP!, Is it possible to install jellyblast from ODIN?

HI ALL. in need of some help here i have installed the latest jellyblast and older jellyblast ROMS and installed perfectly it looks grate it feels grate and I love it BUT! i was not able to make calls send text messages or even brows the net and i have been wondering if its possible to Flash this ROM from ODIN ? to see if that would make a difference i have searched everywhere and cant seem to find such a ROM that exists to use with ODIN apart from original stock ROMS. please help !! Thanks any help is much appreciated Thanks.

NO....
Its not possible to flash custom roms via ODIN. Only stock roms are flashed through ODIN. The rest are done through either stock or CWM Recovery .

We can flash custom roms using odin too. Like the repencis!!
Sent from my GT-S5360 using xda app-developers app

Yeah u can convert it to odin pack using splitfus2 tool by docky73
But I bet it will not make any difference

STEVE.XR said:
HI ALL. in need of some help here i have installed the latest jellyblast and older jellyblast ROMS and installed perfectly it looks grate it feels grate and I love it BUT! i was not able to make calls send text messages or even brows the net and i have been wondering if its possible to Flash this ROM from ODIN ? to see if that would make a difference i have searched everywhere and cant seem to find such a ROM that exists to use with ODIN apart from original stock ROMS. please help !! Thanks any help is much appreciated Thanks.
Click to expand...
Click to collapse
i think nothing diff between odin and cwm,
if the prob is call and txt..
try to flash the jellyblastv3.. then if its ok.. flash the csc latest firmware of your country via odin.. note: 'csc' only,. if its ok reboot.. and try to make call or txt..

webconnect said:
We can flash custom roms using odin too. Like the repencis!!
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Any idea ware i can get the ROM files for ODIN my Helpfully friend ? :good:

m.h.mahadi said:
Yeah u can convert it to odin pack using splitfus2 tool by docky73
But I bet it will not make any difference
Click to expand...
Click to collapse
I tried to convert them but i have no idea on how to use the converting software ?

STEVE.XR said:
I tried to convert them but i have no idea on how to use the converting software ?
Click to expand...
Click to collapse
Your problem is not going to be solved if you flash custom rom from Odin . So stop doing that..
Flash latest firmware for your region from doky73 thread... search for it in dev section...
then install it in Odin.. then install custom rooms.. your problem should be solved..
Sent from the MUST have app! dattebayo!

Just flash it again even I had the same problem
Sent from my GT-S5360 using xda premium

nitubhaskar said:
Your problem is not going to be solved if you flash custom rom from Odin . So stop doing that..
Flash latest firmware for your region from doky73 thread... search for it in dev section...
then install it in Odin.. then install custom rooms.. your problem should be solved..
Sent from the MUST have app! dattebayo!
Click to expand...
Click to collapse
Right so if i flash the SCS file first then install the ROM via CWM it will work ? ihave been installing the ROM first then the CSC file.

Fang Leone said:
Just flash it again even I had the same problem
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
I have like 13 times haha

STEVE.XR said:
I have like 13 times haha
Click to expand...
Click to collapse
Yup first firmware.. then custom..
Sent from the MUST have app! dattebayo!

If the rom has .MD5 files u can flash through odin
I dont think Jellyblast has the .MD5 files so u can't
Sent from my GT-S5360 using xda app-developers app

[Q] Phone got locked....

hi guys, my galaxy y just got locked due to too many pattern lock attempts. Now I know how to flash firmware through Odin but the instruction says I have to know the firmware version of my phone before hand. The instruction asks me to check my firmware version by pressing *#*#1234#*#*
but all I could type on my phone is emergency number and that aint it. So could you guys please tell me how to check my phones firmware number....I think I can do the rest from there.
Thanks.

Ishan Sardar said:
hi guys, my galaxy y just got locked due to too many pattern lock attempts. Now I know how to flash firmware through Odin but the instruction says I have to know the firmware version of my phone before hand. The instruction asks me to check my firmware version by pressing *#*#1234#*#*
but all I could type on my phone is emergency number and that aint it. So could you guys please tell me how to check my phones firmware number....I think I can do the rest from there.
Thanks.
Click to expand...
Click to collapse
well for flashing u dont particularly need to no the firmware......u just need to dwnload the files (odin package) any area no problem...but better to get the one from u bought.....like for indian devices its ddla,ddlc,aalk etc.....similarly u gt differnt files fr different region.......dwnload the file based on the place frm where u bought ur device ....nd do odin
here c this

npx123 said:
well for flashing u dont particularly need to no the firmware......u just need to dwnload the files (odin package) any area no problem...but better to get the one from u bought.....like for indian devices its ddla,ddlc,aalk etc.....similarly u gt differnt files fr different region.......dwnload the file based on the place frm where u bought ur device ....nd do odin
here c this
Click to expand...
Click to collapse
erm sorry I'm a sony user and this is my first attempt to do anything with samsung....I see a lot of odin package for india bangladesh srilanka under asia pacific...which 1 should I download?? and if you know could u please give me the link for the flashing process of odin package with odin.

Ishan Sardar said:
erm sorry I'm a sony user and this is my first attempt to do anything with samsung....I see a lot of odin package for india bangladesh srilanka under asia pacific...which 1 should I download?? and if you know could u please give me the link for the flashing process of odin package with odin.
Click to expand...
Click to collapse
download ddlk1.....its the latest one.....
Sent from my GT-S5360 using xda app-developers app

anmolsharma1293 said:
download ddlk1.....its the latest one.....
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
ok downloading...could you please tell me how do I flash this using Odin? is there any guide cuz I didnt find any, I found how to flash firmware but not this.
Thanks

Ishan Sardar said:
ok downloading...could you please tell me how do I flash this using Odin? is there any guide cuz I didnt find any, I found how to flash firmware but not this.
Thanks
Click to expand...
Click to collapse
Scroll down in docky' s thread where u downloaded the firmware package u will get the instructions...
don't say than just press it
Sent from my GT-S5360 using xda app-developers app

Ishan Sardar said:
ok downloading...could you please tell me how do I flash this using Odin? is there any guide cuz I didnt find any, I found how to flash firmware but not this.
Thanks
Click to expand...
Click to collapse
go to this link....http://forum.xda-developers.com/showthread.php?p=21846668
go to post no. 2....their u will get the flashing guide......
Sent from my GT-S5360 using xda app-developers app

Ishan Sardar said:
ok downloading...could you please tell me how do I flash this using Odin? is there any guide cuz I didnt find any, I found how to flash firmware but not this.
Thanks
Click to expand...
Click to collapse
ull get 3 files in that package....PDA, MODEM AND CSC...................................HOPE U GOT ODIN FR SAMSUNG GALAXY Y...............................................OR DWNLOAD IT..JUST GOOGLE IT OR HERE
odin V1.85
RUN ODIN AS ADMINISTRATOR.......
PLACE PDA IN PDA OPTION
PLACE MODEM IN PHONE OPTION
AND CSC IN CSC OPTION OF ODIN......
NOW GO TO DOWNLOAD MODE OF GALAXY Y..(PRESS VOL DOWN + HOME/CENTER BUTTON + POWER BUTTON........ULLL GET A BLACK SCREEN WITH GREEN TEXT.... THER PRESS VOLUME UP....BEFORE THAT CONNECT UR DEVICE TO PC USING CAable..
as soon as u complete the above procedures...the odin wil detect ur device...nd will be written in YELLOW SAYING com 5 or 6
now click start......the process will finish in few min nd wil reboot

Ishan Sardar said:
hi guys, my galaxy y just got locked due to too many pattern lock attempts. Now I know how to flash firmware through Odin but the instruction says I have to know the firmware version of my phone before hand. The instruction asks me to check my firmware version by pressing *#*#1234#*#*
but all I could type on my phone is emergency number and that aint it. So could you guys please tell me how to check my phones firmware number....I think I can do the rest from there.
Thanks.
Click to expand...
Click to collapse
Theres an easy way
Just format your phone by recovery.
After switching off your phone and press vol up,home&power key and then clear data and cache and then reboot u will se it will nt ask for password.
Sent from my GT-S5360 using xda premium

Ishan Sardar said:
hi guys, my galaxy y just got locked due to too many pattern lock attempts. Now I know how to flash firmware through Odin but the instruction says I have to know the firmware version of my phone before hand. The instruction asks me to check my firmware version by pressing *#*#1234#*#*
but all I could type on my phone is emergency number and that aint it. So could you guys please tell me how to check my phones firmware number....I think I can do the rest from there.
Thanks.
Click to expand...
Click to collapse
y u want to flash stock rom via odin?just format data from recovery as sanchit said and u r done...its a matter of minutes.
Sent from my GT-S6102 using xda premium

Yep! Format ur phone via recovery. Just goto recovery & select & confirm "wipe data/factory reset". It will not ask for pattern.
In future also, u may do this instead of updating whole firmware.
Sent Via XDA™ Premium

Why dont u just enter ur email and pass to unlock it lol
Sent from my GT-S5360 using xda app-developers app

[help]!!! Help the newbie here!!

Hi everyone, i encounter a problem earlier. Basically i rooted my phone days ago and i m still using stock rom without flashing custom roms. So i eager to try out the mod from Omega thread and install the Omega file from google play. After downloaded the mod (for omega rom) of scrolling wallpaper for TW and i flashed it. Booting up my phone with TW not responding, force close. Try again and again still cant boot into menu. I know i m stupid that didn't do a NAND backup before flashing it, and now i m stuck at this force close thing. So i found out out there there is a stock official rom XXUBMEA, i was previously from XXUAME2, can i flash this rom with odin?What is the complete process i need to do to flash this stock rom? Appreciate that you can help me so i can get back my phone!!

snoopy5 said:
Hi everyone, i encounter a problem earlier. Basically i rooted my phone days ago and i m still using stock rom without flashing custom roms. So i eager to try out the mod from Omega thread and install the Omega file from google play. After downloaded the mod (for omega rom) of scrolling wallpaper for TW and i flashed it. Booting up my phone with TW not responding, force close. Try again and again still cant boot into menu. I know i m stupid that didn't do a NAND backup before flashing it, and now i m stuck at this force close thing. So i found out out there there is a stock official rom XXUBMEA, i was previously from XXUAME2, can i flash this rom with odin?What is the complete process i need to do to flash this stock rom? Appreciate that you can help me so i can get back my phone!!
Click to expand...
Click to collapse
Yes u can flash the firmware if its for the same version u are having using ODIN
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware\
use the above link incase u wanna find more details abt stock firmware etc
Download the stock firmware u wanna install ope ODIN select the firmware thru PDA connect ur device in download mode make sure u have all drivers install once in download mode if the device is detected press start and let it do its work
Do unzip the firmware if its a Zip file and the file will be .tar

omiemer fed
123hiten said:
Yes u can flash the firmware if its for the same version u are having using ODIN
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware\
use the above link incase u wanna find more details abt stock firmware etc
Download the stock firmware u wanna install ope ODIN select the firmware thru PDA connect ur device in download mode make sure u have all drivers install once in download mode if the device is detected press start and let it do its work
Do unzip the firmware if its a Zip file and the file will be .tar
Click to expand...
Click to collapse
Thanks bro, anyway I'm from Singapore, and i would like to try out the latest firmware(GERMANY DBT I9505XXUBMEA), am i good to go for this 1? is there any problem if i flash this stock rom? Appreciate your help!! :good:

snoopy5 said:
Thanks bro, anyway I'm from Singapore, and i would like to try out the latest firmware(GERMANY DBT I9505XXUBMEA), am i good to go for this 1? is there any problem if i flash this stock rom? Appreciate your help!! :good:
Click to expand...
Click to collapse
No problem u can use that also it will work remember every time u flash it increases counter incase u visit a Samsung service centre u need to reset that using a tool Triangle away which works with root but this is later part incase u need for now u go ahead and flash it
Sent from my GT-I9500 using xda premium

123hiten said:
No problem u can use that also it will work remember every time u flash it increases counter incase u visit a Samsung service centre u need to reset that using a tool Triangle away which works with root but this is later part incase u need for now u go ahead and flash it
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Thousand thanks bro. Last question, will the flashing of this stock rom reset all my setting including the message, contact number and etc and finally roll back to unroot?

snoopy5 said:
Thousand thanks bro. Last question, will the flashing of this stock rom reset all my setting including the message, contact number and etc and finally roll back to unroot?
Click to expand...
Click to collapse
It will not delete the setting apps data etc since u are flashing with odin
However after flashing u make whatever data backup u need and reset the device completely so that the csc will match the new firmware and will work with kies
Sent from my GT-I9500 using xda premium

123hiten said:
It will not delete the setting apps data etc since u are flashing with odin
However after flashing u make whatever data backup u need and reset the device completely so that the csc will match the new firmware and will work with kies
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!

snoopy5 said:
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
Click to expand...
Click to collapse
its not exactly req to do a full reset but good if u do any issue u were facing b4 will be vanished
and full reset and start will make all changes in CSC etc

snoopy5 said:
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
Click to expand...
Click to collapse
You can extract csc from the stock firmwares. What carrier are you on?

lzk123 said:
You can extract csc from the stock firmwares. What carrier are you on?
Click to expand...
Click to collapse
how can i extract from stock firmwares? i just flash with I9505XXUBMEA so you mean i need to extract from this firmwares? anyway i'm from singapore and i believe my phone is not locked to any carrier.

snoopy5 said:
how can i extract from stock firmwares? i just flash with I9505XXUBMEA so you mean i need to extract from this firmwares? anyway i'm from singapore and i believe my phone is not locked to any carrier.
Click to expand...
Click to collapse
I believe you must flash the Singapore or near region Stock ROM.

Disturbed™ said:
I believe you must flash the Singapore or near region Stock ROM.
Click to expand...
Click to collapse
My stock rom suppose is I9505XXUAMEA2 if not mistaken and i rooted it last time, while i was flashing some mod just find out my TW launcher force stop and i need to use easy home mode. i mess up with it. saw the post said latest firmwares release which my country will not get it soon and i decided to flash GERMANY I9505XXUBMEA firmwares. surprisingly i din face with any problem like wifi not working, 4g lte non working and etc. everything just fine. i guess is my luck not to gone through factory reset to make CSC work?

snoopy5 said:
My stock rom suppose is I9505XXUAMEA2 if not mistaken and i rooted it last time, while i was flashing some mod just find out my TW launcher force stop and i need to use easy home mode. i mess up with it. saw the post said latest firmwares release which my country will not get it soon and i decided to flash GERMANY I9505XXUBMEA firmwares. surprisingly i din face with any problem like wifi not working, 4g lte non working and etc. everything just fine. i guess is my luck not to gone through factory reset to make CSC work?
Click to expand...
Click to collapse
Singapore I9505XXUBMEA firmware is out today. I'm also using the Germany version currently.

[Q] How to: Official Update to XXUBMEA?

Hi folks, I wanna update my device to I9505XXUBMEA (for App-to-SD), but don't know how to exactly. I want to do it in the most legal way, without erasing anything (Apps, Data, Settings etc.) on my S4.. So can someone tell & show me the best way how to do this please?
Btw I'm from the Netherlands and got my phone here, so I don't know if I can use or need the Stock Firmware and/or Kernel File from Germany's XXUBMEA update and if it's compatible without bricking my phone or losing data, because I havn't seen any I9505XXUBMEA update for my country yet..
Thank you in advance.

_Android_Freak_ said:
Hi folks, I wanna update my device to I9505XXUBMEA (for App-to-SD), but don't know how to exactly. I want to do it in the most legal way, without erasing anything (Apps, Data, Settings etc.) on my S4.. So can someone tell & show me the best way how to do this please?
Btw I'm from the Netherlands and got my phone here, so I don't know if I can use or need the Stock Firmware and/or Kernel File from Germany's XXUBMEA update and if it's compatible without bricking my phone or losing data, because I havn't seen any I9505XXUBMEA update for my country yet..
Thank you in advance.
Click to expand...
Click to collapse
Download the rom from the topic and use odin to flash it http://forum.xda-developers.com/showthread.php?t=2252855
German firmware will work, used the german one and the poland one on my S3 (and i live in the Netherlands too)

MichelN said:
Download the rom from this site and use odin to flash it http://forum.xda-developers.com/showthread.php?t=2252855
Click to expand...
Click to collapse
There isn't any I9505 XXUBMEA Update for the Netherlands available in there.. I've checked that thread already =(

_Android_Freak_ said:
There isn't any I9505 XXUBMEA Update for the Netherlands available in there.. I've checked that thread already =(
Click to expand...
Click to collapse
Why not use the latest firmware ? I9505XXUBMF8

MichelN said:
Why not use the latest firmware ? I9505XXUBMF8
Click to expand...
Click to collapse
Does it support App to SD-Card movement and will my data not be deleted?

_Android_Freak_ said:
Does it support App to SD-Card movement and will my data not be deleted?
Click to expand...
Click to collapse
1. Yes
2. Yes

MichelN said:
1. Yes
2. No
Click to expand...
Click to collapse
So.. each (Official) Firmware which I install on my S4 will delete all data on my phone?

_Android_Freak_ said:
So.. each (Official) Firmware which I install on my S4 will delete all data on my phone?
Click to expand...
Click to collapse
No, nothing will be deleted unless you do a factory reset.
BTW: I misread your post haha, thought you said ''will it delete my data''.

MichelN said:
No, nothing will be deleted unless you do a factory reset.
BTW: I misread your post haha, thought you said ''will it delete my data''.
Click to expand...
Click to collapse
Ohh thank God.. i seriously was doubting now to continue any further, since I would've to Re-apply all setting and download all Apps and Data once again.. :good:
Now, I dont know what the Kernel is used for.. but do I need to get that also? After I have the 1.6 GB sized Stock Firmware (aka ROM right?), I can start installing?
I'm downloading I9505XXUBMF8 (first one on the list, most recent one) than from the Official Rom Collection (Thread).
I've got myself Odin also (File name: AndroidJinn.Com.Odin307, Size: 1,15 MB) like you said. (Please confirm if its the right one)
If it's not to much asked, could you write within a few sentences, the steps on how to get trough the installation and what I need to do before starting, like: do I need to backup anything or does my phone have to be USB plugged to my pc the whole time etc.?

http://forum.xda-developers.com/showthread.php?t=2265477
sent from my Galaxy

Will flashing an official firmware via odin with another CSC void the warranty or not??

Well.. can someone at least tell me how I can check if my phone is factory unlocked and if I need the Kernel file also or not please.. ty.
Sent from my GT-I9505 using xda premium

talal_zaki said:
Will flashing an official firmware via odin with another CSC void the warranty or not??
Click to expand...
Click to collapse
It depends on the service center. Some dont look to csc if it is stock. And some look. Any way you can flash your original firmware back.
_Android_Freak_ said:
Well.. can someone at least tell me how I can check if my phone is factory unlocked and if I need the Kernel file also or not please.. ty.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
If it can accept another sim so it is unbranded firmware.
Any way, you can flash any stock for your I9505. Kernel is included in the firmware, no need tp flash it seperately
Sent from my GT-S5360 using xda app-developers app

Another question: I have USB debugging turned on, but do I also need to select/apoint a App to it or not? May look like a newbish question, but I want to do everything correctly, w/o damaging my phone.. if you get me.
Sent from my GT-I9505 using xda premium

_Android_Freak_ said:
Another question: I have USB debugging turned on, but do I also need to select/apoint a App to it or not? May look like a newbish question, but I want to do everything correctly, w/o damaging my phone.. if you get me.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
No need to enable usb debugging when flashing with odin
Sent from my N91 using xda app-developers app

Can someone tell me why again XXUBMF8 is better than XXUBMEA?
I mean what are the differences compared to one another,
the only thing I know is that they both support App-2-Sd.
Which is actually ofcourse the most important thing to know,
but what other <better improved> features does the XXUBMF8 (DBT) have than XXUBMEA (DBT)?
And how are overall user experiences with both versions?