Database Users

[Q] Note 3 Cant flash new Recovery!!!!??!

Hi to everyone,
Im pretty new here and havent got much ''knowledge about flashing etc.
I got a note 3 Last Year and, rooted it back then with Towelroot.
Everything worked fine and by time i had to trigger Knox and flashed Philz recovery and Cyanogenmod.
Worked fine too->bored from AOSP->Flashed the Samsung Galaxy s5 Port for my N9005. 2 Months ago,
I actually wanted to flash Pureperfomances with it but didnt worked due to ''permission problems''.
Know i actually tried again to flash it but didnt worked of course.
I had read somewhere that i just have to update my Philz Touch 6.8 to a higher Variant to be able to flash Pureperfomances.
Tried to update my Recovery trough Odin by flashing it via download MOde and Odin to a newer variant.
got into a Bootloop when triying to start recovery, had to get to normal boot trough combining buttons to Download mode and restarted.
Phone and everything else worked fine.
Then tried again to flash an older Variant of Philz and had no success.
after that tried to flash TWRP and didnt succeed too.
tried normal cwm but got the same problem.
Phone continously tries to get into recovery and reboots before starting it. can only see ''recovery booting'' and of coure the ''Kernel not SEAndroid enforcing''.
Got out of Bootloop through Download Mode again.
after trying to flash the same variant of Philz that i had at the start through Odin i didnt get the ''SUCCESS'' Message from Oin just a ''RESET'' in Blue.
same problem of Bootloop of Recovery.
Accessed System again and flashed my old Philz Recovery IMG out of a NAndroid BAckup through the Android App ''Rashr''
(Rashr cant find the right recovery for me Autromatic. Shows me recoveries for s5, cause my Build Prop got the S5 Data in it.)
got my recovery back but got the Problem of not being able to Flash a goddamn recovery.
Please could someone help me with this Issue/problem i got.
And could someone explain me the difference of a TAR.MD5 File Recovery and a IMG Recovery. Odin is just able to flash a TAR
Please Excuse my Spelling and Grammatics.
Had no time for corrections and im German. Aint got that English Practice
German Forums are almost empty and noone ever replies.
I hope you people can help me.[/I][/I][/B][/B]
If it helps in Some Way:
I am using the S5 Stock Port v6.0 From FahadAli
And the Aurora Kernel 11
[full Name:
Linux Version 3.4.93-
AURORA_KERNEL_R11_
eur
([email protected])
(gcc version 4.10.0
20140521
(experimental)(UBER-
Linaro-4.10.0_arm+gra
phite))#1 SMP
PREEMPT Sat jun 14
23:19:24 CEST 2014]

abdullah30539 said:
Hi to everyone,
Im pretty new here and havent got much ''knowledge about flashing etc.
I got a note 3 Last Year and, rooted it back then with Towelroot.
Everything worked fine and by time i had to trigger Knox and flashed Philz recovery and Cyanogenmod.
Worked fine too->bored from AOSP->Flashed the Samsung Galaxy s5 Port for my N9005. 2 Months ago,
I actually wanted to flash Pureperfomances with it but didnt worked due to ''permission problems''.
Know i actually tried again to flash it but didnt worked of course.
I had read somewhere that i just have to update my Philz Touch 6.8 to a higher Variant to be able to flash Pureperfomances.
Tried to update my Recovery trough Odin by flashing it via download MOde and Odin to a newer variant.
got into a Bootloop when triying to start recovery, had to get to normal boot trough combining buttons to Download mode and restarted.
Phone and everything else worked fine.
Then tried again to flash an older Variant of Philz and had no success.
after that tried to flash TWRP and didnt succeed too.
tried normal cwm but got the same problem.
Phone continously tries to get into recovery and reboots before starting it. can only see ''recovery booting'' and of coure the ''Kernel not SEAndroid enforcing''.
Got out of Bootloop through Download Mode again.
after trying to flash the same variant of Philz that i had at the start through Odin i didnt get the ''SUCCESS'' Message from Oin just a ''RESET'' in Blue.
same problem of Bootloop of Recovery.
Accessed System again and flashed my old Philz Recovery IMG out of a NAndroid BAckup through the Android App ''Rashr''
(Rashr cant find the right recovery for me Autromatic. Shows me recoveries for s5, cause my Build Prop got the S5 Data in it.)
got my recovery back but got the Problem of not being able to Flash a goddamn recovery.
Please could someone help me with this Issue/problem i got.
And could someone explain me the difference of a TAR.MD5 File Recovery and a IMG Recovery. Odin is just able to flash a TAR
Please Excuse my Spelling and Grammatics.
Had no time for corrections and im German. Aint got that English Practice
German Forums are almost empty and noone ever replies.
I hope you people can help me.[/I][/I][/B][/B]
If it helps in Some Way:
I am using the S5 Stock Port v6.0 From FahadAli
And the Aurora Kernel 11
[full Name:
Linux Version 3.4.93-
AURORA_KERNEL_R11_
eur
([email protected])
(gcc version 4.10.0
20140521
(experimental)(UBER-
Linaro-4.10.0_arm+gra
phite))#1 SMP
PREEMPT Sat jun 14
23:19:24 CEST 2014]
Click to expand...
Click to collapse
Try to flash your stock firmware again using odin.

Really stuck after trying to load Phoenix Rom, pls help?

OK I'll try explain, I did post in the rom section too since it was relevant, I'll copy here plus more info.
I recently rooted my Gm 900f but that was all, original rom,mainly to run adblocker.
I then read all about phoenix and decided to try.
I performed a FULL backup with TWRP to SD card.
I d/l V8, wiped phone, put on sd and installed via twrp, and this was where it started to go wrong.
Stuck on the initial logo, no sound, no Samsung logo with stars coming off it , waited 30mins.
I did read the 'read first' n it said if NOT coming from lollipop, I was lollipop, but since stuck, I d/l and flashed the boe5 modem bootloader file n flashed with Odin.
Still wouldn't boot.
OK at this point I admit defeat n try load my initial original backup through twrp and it wont load now either.
I can get a basic rom running , but it still says build Alexndr.
So can anyone save me hours n hours of configuring and get my original twrp backup to load again?
Id be sooo appreciative of help?
More phone info
SM-G900F
5.0
baseband G900FXXU1BOE5
Kernel 3.4.0-5176309
build ALEXNDR G900FXXU1POF9
KNOX 2.3

New S3A not booting and 4032 error on flash

I was wondering if somebody has got this before with the Jiayu S3A? I tried to flash a new S3A yesterday by spflashtool because it was delivered with a non rooted rom. Tried to flash an older 5.1 rom in order to flash custom recovery later on (and then 7.1.1 ofcourse ). However it gave me an error (PMT changed for the ROM, it must be downloaded) and some pages on google suggested a format (without bootloader) so I did that. After that I succesfully flashed a rom version 5.1 but when I tried to flash custom recovery or other roms, it kept giving the error message BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) and the phone won't boot. Tried different roms and with/without battery, different settings, different drivers but I still can't flash a rom nor boot the device. Maybe the battery was drained in the process (it is now on a charger for a night). Or maybe it was a S3+ or something, sold with the wrong type?(The box and label on the telephone said JY-S3 and it had 32 gb so it can not be a S3+ right?) Never had this problem before with other S3's so I'm hoping that someone can help me! Thanks in advance.

Sounds like you messed things up completely by flashing the Lollipop ROM and formatting. You git the S3A with 32 GB RAM, right? Afaik this comes preinstalled with Marshmallow and there is no compatible Lollipop ROM for the S3A 32 GB.
If I were you I would try to flash stock MM again. If you really flashed Lollipop with formatting option in SP Flash Tool, you probably need to format, too. Make sure that the phone boots again. Next, flash TWRP recovery from m.a.d. team through SP Flash Tool. Finally flash the m.a.d. Nougat ROM, nano GAPPS and SuperSu in recovery.

SM-N910F Won't boot

Hi,
My SM-N910F wont boot. I have tried to flash a stock rom through Odin, and the flash is successful but when the phone boots up it just says "System UI has stopped" with a black screen.
I messed it up by flashing both modem and bootloader wrongly, then wanting to reset it by flashing stock firmware, but it won't work.
Edit:
I have flashed twrp and managed to factory reset, and it boots now. But now I have another issue, it restarts every 30 seconds, can't even get past set-up.
Edit2:
I have fixed it. I flashed the right modem and a bootloader update and it no longer restarts.
Would appreciate any help.
Thanks.

Help with what?
Sent from this galaxy

Hi there i m running stock 4.4 kitkat on smn910f model and i cannot ota update to lollipop . Can u help ?

Hey speaking of modem and bootloader I upgraded from lollipop to nougat without doing any of these (nit flashing bootloader nor modem) what problems would that cause me
Sent from my SM-N910F using Tapatalk

[urgent] G900P, needed proper bootloader for Nougat, thank you!

Hi mates, thank you!
Briefly the story is that I bought an import S5 G900P with LL 5.0, I updated bootloader to MM and flashed MM, works without baseband, flashed stock 5.0 OK4 (G900PVPU3BOK4_G900PSPT3BOK4_G900PVPU3BOK4_HOME.tar.md5) and baseband (network signal call+data+sms) worked, then I flashed over it the Ressurection Remix 5.8.5, baseband worked but after 3-4 hours I got a hard brick with black screen. Somehow I booted in download mode and flashed again succesfully the Stock LL5.0 but screen keeps black.
I'm with a new phone (under warranty, next day after bought, they kindly replaceded it) with LL5.0, I'm afraid to flash over it the TWRP+RR5.8.5 and get a new brick, can someone expert please suggest me a bootloader which can be considered safe?
Thank you!

solved with some pain, needed to pit the phone and flash the stock MM, then boot to check the baseband, then flash twrp and RR+gapps. All info here:
https://forum.xda-developers.com/sprint-galaxy-s5/development/rom-t3698397
cheers