Related
Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.
did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
I backed up the stock firmware I already had manually, before it prompted on the flash.
did you do a full wipe before flashing the rom?
No i didn't, thought it would be safer incase something went wrong?
run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...
Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.
Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?
you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.
Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?
go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card
Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.
Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that
Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????
sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.
I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...
I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.
Basically, I have s-off and the official clockwork mod recovery installed. However, the same problems occurred with paul's version of custom recovery.
When flashing, I always go through the process of erasing all the partitions via mounts and storage, then i erase davlik cache and battery stats.
Then I install the ROM by the zip install.
And with kernels, I just install (not aware of any other steps that are needed)
But this is where I come unstuck. I am currently on RaiderX303's Cyanogen port. But I can't get any other roms to work. The same with kernels. Basically, flashing always completes with no errors, but then it crashes/stops at the second spash. So on core droid, it crashes on the android with a green circle going round it.
Anyone got any idea why this might be happening? Couldnt find any reference to it from anyone else.
Anyone got any idea?
tried getting clockworkmod from rom manager? the earlier version has a bootloop issue
I have the same problem with the Core Droid Rom, I believe its the kernal it has,some devices don't like it. The phone don't like the overclock, Infact not many do work on my device.
Sent from my Desire HD
rorydaredkign said:
Basically, I have s-off and the official clockwork mod recovery installed. However, the same problems occurred with paul's version of custom recovery.
When flashing, I always go through the process of erasing all the partitions via mounts and storage, then i erase davlik cache and battery stats.
Then I install the ROM by the zip install.
And with kernels, I just install (not aware of any other steps that are needed)
But this is where I come unstuck. I am currently on RaiderX303's Cyanogen port. But I can't get any other roms to work. The same with kernels. Basically, flashing always completes with no errors, but then it crashes/stops at the second spash. So on core droid, it crashes on the android with a green circle going round it.
Anyone got any idea why this might be happening? Couldnt find any reference to it from anyone else.
Click to expand...
Click to collapse
When you say erasing the partitions , do you mean wiping?, I personally would try installing ROM Manager from the market and letting that install the rom from SD, select wipe and backup before flashing and see if that helps at all, Can you flash the CM RC-1?
I can flash that and also the leeDroid and hd Rom. Just don't like the core Droid and buzz kernals
Sent from my Desire HD
yep I am installing by wiping, but on the last install I used rom manager and still the same problem. Just like vimto, I think it may be the Buzz kernel, so I will try a different kernel and see.
rorydaredkign said:
yep I am installing by wiping, but on the last install I used rom manager and still the same problem. Just like vimto, I think it may be the Buzz kernel, so I will try a different kernel and see.
Click to expand...
Click to collapse
There are some strange issues, camera not working for some of us on raiderx303's ROM, which seem to point to possible hardware variation I wonder if this is a symptom of the same issue?, CoreHD uses buzz kernel as default doesn't it?
But didnt you say you had issues with the MCR? that is based on stock rom so am surprised at that
Yep, I was thinking the same. Maybe EU/US difference. I think the Kaiser has about 4 versions didnt it?
Hi All,
I am new here and this is my first post. But i have been reading this forum for quite sometime and know that u guys are now my final stone. I am a proud owner of a Motorola Defy. And I am having this strange behavior, which is effectively rendered the phone almost useless. The phone is acting like its got a restore point in itself, and every time i restart.. it gets back to that point in time.
This includes app installs, uninstalls, stuff placed in system through adb push, theme, everything in the OS. I tried installing a different ROm through clockworkmod, but its not taking effect. Its saying install success but as soon as it restarts, its going back to the old ROM. (takes time to load, so i guess it reinstall back/restored the old version)
Details of device : I am from India and the phone was manufactured in India in around April/May 2011. Its a red lens Defy and and came with Eclair. I updated it officially to the first Froyo release for SEA region. After that i rooted the phone with superone click, and installed WIUI rom. I have been updating the ROM with newer versions around each month. The last one was 1.11.18 though as i waiting for a good ICS version to flash.
The problem occurred after i started installing some gold apps from getJar. It restated in between and install... and that point is kind of acting like a restore point even now.
Things I did: Tried installing different rom by CWM method. Reinstalling second init and CM, both old and new version. Tried restoring nandroid backup of my official ROM. Tried fixed and full sbf flash through rsdlite 4.9.5.2 and now 5.6. First 3 things reset as soon as i restart. For RSDLite, it gives checksum error for each and every ROM i tried. I tried all SEA releases, JORDN_U3_97.21.51, Defy Plus Rom 2.3.6, 2.21 first eclair rom, everything gives the same error. From the RSDLite logs, i could see that there is something wrong as.. say the last successful CG was 33, and the error came for 34, the log says its expecting the checksum on the sbf to be equal to that of CG 33. Its taking the last successful checksum validation and expecting that for all the CGs henceforth. its not showing what the device actually has.
I atlast could somehow, but trial and error, removed all the CGs which were throwing error, and recompiled the sbf to make it pass the RSDLite flash. The CGs present in the ROM (JRDNEM_U3_3.4.3-36-1.7) were 32, 34, 42, 53, 61, 64, 65. And as soon as it booted, it restored back to the checkpoint. Even after i formatted by card and put it in, the app shortcuts remained on the home screen, but as the apps on the card were gone, they are just junk and doesnt open anything.
Thanks in advance. Please let me know what you need from me to help me resolve this issue.
Any help... Anyone?
Can someone please suggest something?
This is what i got from some people. I am not sure how far this is possible, but somehow the theme i installed just before this all happened, from MIUI market.. somehow managed to change something inside phone's kernel, past the locked bootloader? I am totally a noob in this and just a wild imagination?
Or may be some sort of cache wipe is happening everytime the phone boots up, So even when i install the ROM, when it boots up, it gets back the old ROM.. like what would probably happen if i do a factory reset soon after i instal a rom before the restart..?
I would really appreciate it if anyone could help me out with this...
Checksum errors were for me also.
I tried my office computer for flashing and instantly flash was done. The checksum error occurred 7 times on my good computer before that.
Reflashing froyo must take care of all errors happening
Thanks Kapil fr the response. Are you from india? Which sbf did u flash? And waht all did u install in the office pc? I have a pc of my friend where i can try to reflash if you tell me the exact steps that u took in the fresh pc.
Also, can anybody tell me how to use adb commands in CWM mode? Its recognizing my phone in normal mode but as soon as it boots in Moto recovery of CWM, its not recognizing anymore. Want to use adb format commands from recovery.
Hi I was able to use adb in CWM, but format commands were not working. How can i format the system partition? please help me with this.
Is there anyone here who know how to restore a nandroid backup manually using adb commands for MB525???!!!!!
Sounds weird and impossible. Try this. Wipe everything though cwm and flash new rom. Try ms2ginger.
Thanks darshanonline for the suggestion. I tried to wipe everything.. factory reset+cache+dalvik cache wipe. And then tried to install cyanogenmod 7.1 as well as 3 different wiui builds. Everytime it shows that the install was successful, ut as soon as i restart, it would go back to the old ROM.
Is there any checkpoint system in android, seeing the init.rc, i can see comments on something about saving a checkpoint. Is there any particular condition under which this checkpoint may be getting used on very restart?
Also.. is there any way for RSDLite to skip the chksum validations and get the install anyways?.. Some sort of a hack into it?
Ok.. Found something else thats happening. I dont need to shutdown for the system to revert back. Say i install a few things new after a reboot.. After some time.. 1 day at max, i am not able to open them, and neither am i able to open manage applications or market. Everything force closes. I have Ti Backup installed, and i opened it, and i didnt find the new apps to back up. I connected the device and checked through adb, and they were not present in the app folder. They just vanished... So basically after a certain point of tiime, the new stuff just gets deleted on its own.
Guys i know i may sound dumb and stupid with my questions, but i really couldnt find any solution on the net for this. Please tell me waht i should do, and i'll do it. But tell me something. Dont ignore please!
and you did wipe data from within stock recovery (vol down+power etc.), i presume..
Sent from my MB526 using Tapatalk
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Soumik84 said:
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Click to expand...
Click to collapse
DL WIUI 1.12.16 ICS > copy to SD card > Boot in CWM > select zip to install > Install WIUI 1.12.16
Hopefully your problem should be solved.
I found 1.12.16 ICS with lesser FC than the 2.21
labsin said:
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Click to expand...
Click to collapse
Thanks for the link. Now i know that i am not the only one having this issue. But even there its not resolved yet.
@ headers.chennai - Thanks. I will try that ROM, along with Pikachu ROM with Aroma installer, might be a different installer can try fix it?!
BTW.. does anyone have the TI OMAP board utility? Any chance that it can be available outsite here?
I tried the arora installer and it supposedly formatted the system partition and remade it.. but as soon as it finishes and i restart.. I get back the same ROM.
Is it some way that the files are not getting deleted, like some hardware lock or fault?
Soumik84 said:
I tried the arora installer and it supposedly formatted the system partition and remade it...
Click to expand...
Click to collapse
Hi, bro! What is "arora"? I should try it asap, and all other chance.
My trouble here, same as your.
Hey man.. looks like we are having same problem...
Sorry abt the typo... its Aroma Installer. Its with the Pikachu ROM in this link :
http://forum.xda-developers.com/showthread.php?t=1498843
Its a new installer that launches from cwm when u try and install this ROM. u got some options to select and on selecting the complete install option,, the log shows that it formats the system partition and then creates it. I saved the log file, but for some reason the file shows up blank now. Might be problem with the launcher.. or my phone.. dont know.
Soumik84 said:
Its a new installer that launches from cwm...
Click to expand...
Click to collapse
Not for me, my checkpoint without cwm
Allright.. i decided to start using a custom rom, which will be CM9. but because of soo mutch information on this website i dont fully understand anymore what to do, and because im still a noob, i cant post in the original thread of CM9.
I have a Red lens Motorola Defy MB525, found out with catlog that i got the bayer camera module , non branded, stock froyo.
Rooted my defy
nandroid backup with 2nd init , made a copy to my laptop to be completely save.
did backup the apps with titanium backup
also have the app battery calibration so i can fix my battery after the custom rom.
i will write the custom rom when my battery is on atleast 50 percent, so it will not die.
So what do i have to do next?
download the correct ROM, it will come as a .zip
copy it to your sdcard, reboot to 2nd init recovery,
factory reset, and wipe dalvik cache from advanced menu.
then in recovery choose install zip from sdcard, choose your ROM.zip, install,
reboot, it will take pretty long until it boots first time because system is rebuilding the dalvik. (~5min)
Wow , thats sounds way more simple then i can find on this site.
Ill try it tommorow night! any further suggestions?
Maybe you should try multiboot first just to be on the safe side.
what is multiboot and how can i do that?
Multiboot is basically the possibility to have two or more different ROMs (e.g. CM7 and CM9) installed at the same time and when you boot up you can choose which ROM you want to use. But it is a bit complicated and it wouldn't work with stock Froyo as one of the ROMs I think.
More suggestions? You should also download the latest gapps from http://goo.im/gapps and put the zip on your sd card as well. After wiping and installing the CM9 Nightly from sd go to install zip from sd again and choose the gapps .zip. After that you can reboot the system.
The gapps are the Google Apps (i.e. Play Store and some more) and without them you can't even setup your Google Account, download apps, use Gmail etc.
Ah thanks for that! downloaded it and saved it to my desktop for now.
Still need to figure out which rom i need to choose.. the epsylon?
regenboognl said:
Ah thanks for that! downloaded it and saved it to my desktop for now.
Still need to figure out which rom i need to choose.. the epsylon?
Click to expand...
Click to collapse
That would be good. Try it out and see if it suits your requirements..There are many ROM's for froyo kernel. You can try those and see which suits you best.
Happy Modding.
yeaaay! Thanks for all the great help, it worked perfect and was really easy to do!
Cant wait till all the apps are back on my phone from the backups that i made and then let the modding begin! haha
- running Epsylon CM9!
regenboognl said:
yeaaay! Thanks for all the great help, it worked perfect and was really easy to do!
Cant wait till all the apps are back on my phone from the backups that i made and then let the modding begin! haha
- running Epsylon CM9!
Click to expand...
Click to collapse
Congratulations, have fun with ICS on your Defy!
Questions go in the Q&A section
Apologies for the state of this question, but it's been a while
I've been using CM7 on my unlocked Defy since I bought it (6-8 months). However, recently it's gotten a lot more unstable; it freezes up all the time, I can't wake it up, google maps will crash half the time, the camera too, and it involves me restarting it a fair bit. I need to sort it out and I thought I could take this opportunity to try out a new ROM
However I haven't done anything ROM related for a while, and the computer I originally rooted/installed a new ROM on my Defy with is no long gone...so I'm not even sure what programs I need to install.
I seem to remember, the way the Defy is set up, it isn't as simple as wiping the phone and installing any ROM on it?
Could anyone point me in the direction of a guide on here dedicated to moving from CM7 to another ROM? From scratch? Failing that, I may be tempted to just try and wipe and get CM7 on there from the beginning...not even sure where to start
Thanks
If you want to flash a stock ROM, you need to flash the SBF through RSDLite.
While to flash a custom ROM(CM7,CM9), boot into recovery, wipe all, flash the zip from sdcard.
neo.ank said:
If you want to flash a stock ROM, you need to flash the SBF through RSDLite.
While to flash a custom ROM(CM7,CM9), boot into recovery, wipe all, flash the zip from sdcard.
Click to expand...
Click to collapse
nice one, thanks. It's just as simple as that when changing from one ROM to another? I thought something to do with how the Defy's memory worked meant some kind of 'backtracking; wasn't possible
insurgente said:
nice one, thanks. It's just as simple as that when changing from one ROM to another? I thought something to do with how the Defy's memory worked meant some kind of 'backtracking; wasn't possible
Click to expand...
Click to collapse
Yep, that simple. You could try Pikachu Edition, for example, which is even easier (just get into Recovery, install zip, choose the zip file and then AROMA installer does almost everything that's needed). I'm just starting to try it, many people like it.
If you move between CM7 nightlies it isn't even necessary to wipe data, but given your condition, I would recommend you to wipe everything and start again (remember to backup apps and data).
Good luck!
great, always good to see a bit of pikachu
can I go straight from CM7 to pikachu via a wipe? isn't CM7 on kernel 2.3.7?