Does any body has a original mango rom as I am having problems with the flashed roms, My samsung focus restarts several time in a day after flashing roms, I had tried all roms uploaded here,
only AT&T original rom works which is stock , also I am not able to update to mango , it gives me error while updating error codes 80090002 and too many error codes.
I had tried different computers and tried several ways , but failed to update to mango.
My phone details are:
samsung SGH i917
Firmware revision number: 2424.11.11.2
Hardware revision number: 3.1.0.7
Radio software version: 2103.10.11.2
Radio Hardware version: 0.0.0.3
Bootloader version: 4.11.0.9
have you try the ROMs from here? :
Focus i917 AT&T USA and i917R ROGERS CANADA RETAIL ROMs
mirolg said:
have you try the ROMs from here? :
Focus i917 AT&T USA and i917R ROGERS CANADA RETAIL ROMs
Click to expand...
Click to collapse
yes sir
These are the original stock roms and they worked perfectly but i am not able to update ( getting errors like 80090002 , 8000FFF etc. ) after flashing these roms and without updating i cant use applications from market place.
I had already tried four different pc, tried with/without memory card, hard reset, uninstalling and reinstalling zune , deliting update folder contents and whatever i found on google.
Firmware version
Hello,
The only strange thing I see here is your firmware version:
Firmware revision number: 2424.11.11.2
Hardware revision number: 3.1.0.7
Radio software version: 2103.10.11.2
Radio Hardware version: 0.0.0.3
Bootloader version: 4.11.0.9
I have an SGH-i917 Rev. 1.3 and I have the following versions:
Firmware revision number: 2103.11.8.1
Hardware revision number: 3.1.0.7
Radio software version: 2103.11.8.1
Radio Hardware version: 0.0.0.3
Bootloader version: 5.8.0.2
Don't know if you have a Rev. 1.3 or Rev. 1.4 but with mine I have been able to update to 7720 via Zune and then push the updates via Cab Sender up to 8773 and everything is working fine.
If you have a Rev. 1.3 you can try pushing the drivers/radio/bootloader update and see if it fixes the problem.
Please see link attached (thanks to snickler):
http://download.windowsupdate.com/m..._65619f46fa9d49dbdf5f0038f2448742505f828b.cab
Don't know if it will work but it's worth a try.
.:Ale:.
alesaso said:
Hello,
The only strange thing I see here is your firmware version:
Firmware revision number: 2424.11.11.2
Hardware revision number: 3.1.0.7
Radio software version: 2103.10.11.2
Radio Hardware version: 0.0.0.3
Bootloader version: 4.11.0.9
I have an SGH-i917 Rev. 1.3 and I have the following versions:
Firmware revision number: 2103.11.8.1
Hardware revision number: 3.1.0.7
Radio software version: 2103.11.8.1
Radio Hardware version: 0.0.0.3
Bootloader version: 5.8.0.2
Don't know if you have a Rev. 1.3 or Rev. 1.4 but with mine I have been able to update to 7720 via Zune and then push the updates via Cab Sender up to 8773 and everything is working fine.
If you have a Rev. 1.3 you can try pushing the drivers/radio/bootloader update and see if it fixes the problem.
Please see link attached (thanks to snickler):
http://download.windowsupdate.com/m..._65619f46fa9d49dbdf5f0038f2448742505f828b.cab
Don't know if it will work but it's worth a try.
.:Ale:.
Click to expand...
Click to collapse
Sir
Thank you very much for your help, I have a samsung focus with rev 1.3 and the above mentioned versions are changed with the type of rom i flash,
I had downloaded the cab file provided by you pls tell me how can i install this file, a short tutorial will be a great help.
Thankyou once again.
rajindder said:
Sir
Thank you very much for your help, I have a samsung focus with rev 1.3 and the above mentioned versions are changed with the type of rom i flash,
I had downloaded the cab file provided by you pls tell me how can i install this file, a short tutorial will be a great help.
Thankyou once again.
Click to expand...
Click to collapse
See this post and follow the instructions:
http://forum.xda-developers.com/showthread.php?t=1306415
Hope it helps.
.:Ale:.
alesaso said:
See this post and follow the instructions:
http://forum.xda-developers.com/showthread.php?t=1306415
Hope it helps.
.:Ale:.
Click to expand...
Click to collapse
Phone freezes at samsung logo .
rajindder said:
Phone freezes at samsung logo .
Click to expand...
Click to collapse
When is it feezing?
After pushing the drivers/radio/bootloader update?
Try this:
Flash the AT&T retail ROM from this post:
http://forum.xda-developers.com/showthread.php?t=1131022
After that you should be back on build 7004.
Then, try updating via Zune and it should get you up to build 7720 (Mango).
After you're in 7720, you should be able to push the individual updates from this post http://forum.xda-developers.com/showthread.php?t=1306415 via Cab Sender.
I've done it twice on my device and everything is running smoothly.
.:Ale:.
alesaso said:
When is it feezing?
After pushing the drivers/radio/bootloader update?
Try this:
Flash the AT&T retail ROM from this post:
http://forum.xda-developers.com/showthread.php?t=1131022
After that you should be back on build 7004.
Then, try updating via Zune and it should get you up to build 7720 (Mango).
After you're in 7720, you should be able to push the individual updates from this post http://forum.xda-developers.com/showthread.php?t=1306415 via Cab Sender.
I've done it twice on my device and everything is running smoothly.
.:Ale:.
Click to expand...
Click to collapse
Dear
after flashing this AT&T rom I am not able to update from zune , its giving me error codes , i had tried 4 different pcs every time its giving error mostly 80090002, i am able to update to 7390 only.
Related
Just plugged into Zune and was offered this.
Anyone else got it?
I'm installing it.
I got an omnia 7.
Filimindji said:
I'm installing it.
I got an omnia 7.
Click to expand...
Click to collapse
Cool, post up how you get on. My battery is too low to update at the moment so just giving it some juice and i'll try it
No update here.
What firmware were you on before? What network?
I'm using a generic rom.
Orange UK
OS ver 7.0.7392.0
Frimware Rev 0222.10.10.6
Hardware Rev 3.15.0.4
Radio Software 2424.10.10.6
Radio Hardware 0.0.0.800
Bootloader Ver 4.10.1.9
Chip SOC 0.36.2.0
pda bvjj6
phone xxjj6
csc orajj6
Orange FR
OS ver 7.0.7392.0
Frimware Rev 0222.11.2.2
Hardware Rev 3.15.0.4
Radio Software 2424.11.2.2
Radio Hardware 0.0.0.800
Bootloader Ver 5.2.1.4
Chip SOC 0.36.2.0
Freypal said:
Orange UK
OS ver 7.0.7392.0
Frimware Rev 0222.10.10.6
Hardware Rev 3.15.0.4
Radio Software 2424.10.10.6
Radio Hardware 0.0.0.800
Bootloader Ver 4.10.1.9
Chip SOC 0.36.2.0
pda bvjj6
phone xxjj6
csc orajj6
Click to expand...
Click to collapse
Ah, got me excited there. lol That update is an old one, looks like Orange were just taking their sweet time.
Update succesful.
I now have...
OS ver 7.0.7392.0
Firmware Rev 0222.11.2.2
Hardware Rev 3.15.0.4
Radio Software 2424.11.2.2
Radio Hardware 0.0.0.800
Bootloader Ver 5.2.1.4
Chip SOC 0.36.2.0
pda bvkb2
phone xxkb2
csc orakb2
KB2 is just the latest firmware isn't it?
Sweet Deactivates the back/search button when swiped within a game as i had read.
And bye bye dodgy bootloader yay
Freypal said:
Update succesful.
I now have...
OS ver 7.0.7392.0
Firmware Rev 0222.11.2.2
Hardware Rev 3.15.0.4
Radio Software 2424.11.2.2
Radio Hardware 0.0.0.800
Bootloader Ver 5.2.1.4
Chip SOC 0.36.2.0
pda bvkb2
phone xxkb2
csc orakb2
KB2 is just the latest firmware isn't it?
Click to expand...
Click to collapse
what was your previous version??
I have flashed to KC1 and the only Difference i can spot is that the bootloader has a higher number..
Actually there is KC3 update from what I saw, check this link
http://www.samsung.com/uk/consumer/...3G/index.idx?pagetype=prd_detail&tab=support#
it updates some parts of the system, SLDR1, SLDR2 and bootloader for sure, don't know about the rest.
//the SLDR and SLDR2 might have come as imageupdate, but the bootloader probably not. It is quite older update so I am not sure if it is still supposed to be new or not
Generic phones will always get updates first. When Samsung get the update from Microsoft and tailor it to the Omnia 7, after testing, it goes public on the generic phones and they also send it out to the netowork operators to then add their own branding and other stuff.
Only other thing i've noticed so far is that the keypad typing tone has changed. It no longer plays a sound for every key press.
Hello,
in spain with a unbranded omnia 7 i not have the update available :-(
This update 'bricked' my phone as it won't start to the OS and only gets into recovery or download mode. When trying to do a backup reinstall with zune (it automatically recognizes the phone is in recovery mode and needs to be repaired) the process gets to 99% and then an error pops up. Also the windows phone update support tool doesn't recognize my phone being in recovery mode and the samsung support tool doesn't put the OS back into functioning. What should I do now ? Luckily I kept a recent backup but not being able to restore the backup sucks.
DAVIZINHO said:
what was your previous version??
Click to expand...
Click to collapse
It went from JJ6 to KB2
Freypal said:
It went from JJ6 to KB2
Click to expand...
Click to collapse
thanks for the info!
Has anyone other than Orange users got this update ?
Someone on the Windows Phone Blog saying they can't update it and get a repeated error code.
It really does seem to be luck of the draw as to whos updates ok and whos doesn't.
However I always clear as much space as possible on my device before i try to update. I try and have at least 4gb free with a decent charge in my battery and i plug straight into a back USB2 port and so far touch wood, it's been ok for me.
Does anyone know what the recent Samsung firmware update does?
Per the About screen:
OS version: 7.10.7720.68
Firmware revision number: 2103.11.8.1
Hardware revision number: 3.1.0.7
Radio software version: 2103.11.8.1
Radio hardware version: 0.0.0.3
Bootloader version: 5.8.0.2
Chip SOC version: 0.36.2.0
The update did not specify any bug fixes so I'm just curious what it does.
uh, os version.... that would be mango no?
Is this from AT&T?
where/when did you get the firmware update? I havent seen any update notifications on my device yet. i updated my focus to Mango RTM as soon as it was available, my firmware still shows as 2103.11.3.3 also my radio software and Bootloader are different than yours also, Radio is 2103.11.3.3 and Bootloader is 5.3.1.6
Is yours 1.3 or 1.4 ???
Rogers already got 2124.10.12.2
When did you got update notice on Rogers?
I am using NoDo Focus on Rogers and it says No updates available...
minori_aoi said:
Is yours 1.3 or 1.4 ???
Click to expand...
Click to collapse
mine is a 1.3
I'm still stuck on 2103.10.10 and all the force updates that I've tried have failed. Any ideas?
Ditto on the 2103.10.10.1. I'm still stuck on this (rev 1.3 phone) and haven't been offerened any other updates. Is it possible to force a firmware upgrade as it seems like this firmware is also the reason that I am unable to InterOP Unlock.
Try this. I forced mine when mango came out officially. I thought I bookmarked the page but this is all I have saved. I know it's somewhere here on the forums.
http://forum.xda-developers.com/showpost.php?p=17917562&postcount=46
I got the Samsung update on "mango day" I was already on the leaked RTM 7720 so I was stoked to be getting any update what so ever . Turns out that update is firmware and it brought me up to date and back on the update track . What it does is going to depend on what version you are running but if you have mango I can tell you what it did for me. First thing I noticed was the touch to focus on the camera it would focus b4 on touch but not in specific spots of the screen , The compass now works , diagnostics , hmmm I a sure there are alot more but just a few I noticed rite away.
Sent from my SGH-i917 using XDA Windows Phone 7 App
I made the following registry changes to my focus and got the update notification in Zune for the update 7.10.8107 and reverted to the default values before updating. The update went smoothly and the device is working fine.
[HKLM\System\Platform\DeviceTargetingInfo\]
MobileOperator = VOD-IT
MOName = Vodafone
OEMDeviceName = ATLANTIC_VDF_IT
MODeviceName = LG E-900
OemName = LG
Keep the backup securely for future use if needed.
abyjohnponvelil said:
I made the following registry changes to my focus and got the update notification in Zune for the update 7.10.8107 and reverted to the default values before updating. The update went smoothly and the device is working fine.
[HKLM\System\Platform\DeviceTargetingInfo\]
MobileOperator = VOD-IT
MOName = Vodafone
OEMDeviceName = ATLANTIC_VDF_IT
MODeviceName = LG E-900
OemName = LG
Click to expand...
Click to collapse
Confirmed working, updated my Rogers to 8107. No bugs so far (internet sharing working fine) and still unlocked.
Here's how I did it:
1. On phone, change the registry in WP7 Root tools to LG as above
2. Connect to PC/Zune, sync, then update pops up
3. On PC, click until the screen with "Update now" and "Update later", don't click further
4. On phone, launch WP7 Root Tools and undo the e the registry changes on the phone, and then exit to home screen
5. On PC, Click "Update now"
Here are the details after updating to 8107 on my Focus (Rogers):
OS version: 7.10.8107.79
Firmware revision number: 2124.11.9.4
Hardware revision number: 3.1.0.7
Radio software version: 2124.11.9.3
Radio hardware version: 0.0.0.3
Bootloader version: 5.9.2.2
Chip SOC version: 0.36.2.0
my Focus is hw revision 1.3
Please read the thread properly before attempting this!
Hardware version 1.4 was reported to have issues (at least on page 2).
What's the version of your focus i.e. rev 1.3 or 1.4? Can I try this on focus 1.4?
Sent from my SGH-i917. using Board Express
Just forced my Focus (v1.3). Thanks for the info!
Version Info?
skirtsfly said:
Just forced my Focus (v1.3). Thanks for the info!
Click to expand...
Click to collapse
Can you tell me what versions you have after the update:
Settings/About/More Info
Firmware, hardware, radio etc?
Thanks
Rahul_M said:
What's the version of your focus i.e. rev 1.3 or 1.4? Can I try this on focus 1.4?
Sent from my SGH-i917. using Board Express
Click to expand...
Click to collapse
My Focus is 1.3, updated the info above as well.
Usually revision 1.3 is out first and then 1.4...
I don't even know if there is an update, but you can sure try
JamesAllen said:
Can you tell me what versions you have after the update:
Settings/About/More Info
Firmware, hardware, radio etc?
Thanks
Click to expand...
Click to collapse
See above, my Focus is 1.3
Rahul_M said:
What's the version of your focus i.e. rev 1.3 or 1.4? Can I try this on focus 1.4?
Sent from my SGH-i917. using Board Express
Click to expand...
Click to collapse
I did this on rev 1.3. I am not sure of 1.4. Take a backup before trying anything to be on the safer side.
JamesAllen said:
Can you tell me what versions you have after the update:
Settings/About/More Info
Firmware, hardware, radio etc?
Thanks
Click to expand...
Click to collapse
OS Version: 7.10.8107.79
Firmware revision number:2103.11.8.1
Hardware revision number:3.1.0.7
Radio software version: 2103.11.8.1
Radio hardware version: 0.0.0.3
Bootloader version: 5.8.0.2
ChipSOC version: 0.36.2.0
There is no difference in Firmware, Radio, Chip SOC numbers, etc. between this method and the CAB method mentioned in XDA WP7 development and hacking. I tried using the restore option after this for testing and it worked fine. I again updated using this method. Anyway, try at your own risk.
For Rogers
OS version: 7.10.8107.79
Firmware revision number: 2124.11.9.4
Hardware revision number: 3.1.0.7
Radio software version: 2124.11.9.3
Radio hardware version: 0.0.0.3
Bootloader version: 5.9.2.2
Chip SOC version: 0.36.2.0
For AT&T
OS Version: 7.10.8107.79
Firmware revision number:2103.11.8.1
Hardware revision number:3.1.0.7
Radio software version: 2103.11.8.1
Radio hardware version: 0.0.0.3
Bootloader version: 5.8.0.2
ChipSOC version: 0.36.2.0
abyjohnponvelil said:
There are some difference in Firmware, Radio, Chip SOC numbers between this method and the CAB method mentioned in XDA WP7 development and hacking. I don't know what will be the side effects of this. Still now no problems for me. Don't know the CAB details is from AT&T Focus or Rogers Focus. Try at your own risk.
This Method
OS version: 7.10.8107.79
Firmware revision number: 2124.11.9.4
Hardware revision number: 3.1.0.7
Radio software version: 2124.11.9.3
Radio hardware version: 0.0.0.3
Bootloader version: 5.9.2.2
Chip SOC version: 0.36.2.0
CAB Method
OS Version: 7.10.8107.79
Firmware revision number:2103.11.8.1
Hardware revision number:3.1.0.7
Radio software version: 2103.11.8.1
Radio hardware version: 0.0.0.3
Bootloader version: 5.8.0.2
ChipSOC version: 0.36.2.0
Click to expand...
Click to collapse
The cab method dones't include specific OEM fixes, like Firmware, Radio, etc it just updates the OS. Through Zune you get the correct updates (including OEM), regardless of the method.
It's the notification that's missing and we need to have (it used to be forced through disconnect method for NoDo).
Canada/US
I could be wrong but I believe Rogers was always 2124 and the US 2103.
JamesAllen said:
I could be wrong but I believe Rogers was always 2124 and the US 2103.
Click to expand...
Click to collapse
You would be correct (at least till now, 9th Jan 2012 )
I have corrected the post of mine mentioned by you. I got it wrong in documenting. Sorry.........
EnderPsp said:
You would be correct (at least till now, 9th Jan 2012 )
Click to expand...
Click to collapse
You are right, it was a documenting error.
EnderPsp said:
The cab method dones't include specific OEM fixes, like Firmware, Radio, etc it just updates the OS. Through Zune you get the correct updates (including OEM), regardless of the method.
It's the notification that's missing and we need to have (it used to be forced through disconnect method for NoDo).
Click to expand...
Click to collapse
I have corrected the post of mine mentioned by you. I got it wrong in documenting. Sorry.........
EnderPsp said:
You would be correct (at least till now, 9th Jan 2012 )
Click to expand...
Click to collapse
You are right, it was a documenting error. Sorry............
JamesAllen said:
I could be wrong but I believe Rogers was always 2124 and the US 2103.
Click to expand...
Click to collapse
You are right. It was a documenting error............
abyjohnponvelil said:
There is no difference in Firmware, Radio, Chip SOC numbers, etc. between this method and the CAB method mentioned in XDA WP7 development and hacking. I tried using the restore option after this for testing and it worked fine. I again updated using this method. Anyway, try at your own risk.
For Rogers
OS version: 7.10.8107.79
Firmware revision number: 2124.11.9.4
Hardware revision number: 3.1.0.7
Radio software version: 2124.11.9.3
Radio hardware version: 0.0.0.3
Bootloader version: 5.9.2.2
Chip SOC version: 0.36.2.0
For AT&T
OS Version: 7.10.8107.79
Firmware revision number:2103.11.8.1
Hardware revision number:3.1.0.7
Radio software version: 2103.11.8.1
Radio hardware version: 0.0.0.3
Bootloader version: 5.8.0.2
ChipSOC version: 0.36.2.0
Click to expand...
Click to collapse
This method didn't work for me. I tried cab method and it worked but all the apps from marketplace stopped working, though default apps were working fine. I tried to reinstall from marketplace but it gave error. Tried restart few times but didn't work. So finally I did hard reset and now everything is working perfectly. Reinstalled all the apps back from market. Below are the details:
Samsung focus i917 rev 1.4
OS version: 7.10.8107.79
Firmware: 2103.11.10.1
Hardware: 3.1.0.7
Radio software: 2103.11.9.3
Radio hardware: 0.0.0.4
Bootloader: 5.10.0.7
Chip SOC: 0.36.2.0
Rahul_M said:
This method didn't work for me. I tried cab method and it worked but all the apps from marketplace stopped working, though default apps were working fine. I tried to reinstall from marketplace but it gave error. Tried restart few times but didn't work. So finally I did hard reset and now everything is working perfectly. Reinstalled all the apps back from market. Below are the details:
Samsung focus i917 rev 1.4
OS version: 7.10.8107.79
Firmware: 2103.11.10.1
Hardware: 3.1.0.7
Radio software: 2103.11.9.3
Radio hardware: 0.0.0.4
Bootloader: 5.10.0.7
Chip SOC: 0.36.2.0
Click to expand...
Click to collapse
Sorry to hear that
On another note, interesting:
Samsung focus i917 rev 1.4
Radio hardware: 0.0.0.4
It seems this works only for Focus 1.3.
Since there are no OEM updates with this update, only the OS version number changes. If there were OEM updates, then this method of updation will brick the phone as the OEM updates are not for this mobile.
Hello
I have an ATT HTC Surround Y8788 it is unlocked to use with any SIM anywhere.
OS Version 7.10.8107.79
Firmware Revision 2250.21.40300.502
Hardware Revision 0003
Bootloader version: 1.52.2250.4 (120323)
Chip Soc version 2.2.5.0
This phone came with a DFT firmware and it looks good, however it keeps crashing and the phone reboots by itself for no reason.
Therefore, I want to go back to a stock rom and start freshing updating to where it's possible using Zune.
Now my question is, I downloaded this firmware: RUU_Mondrian_Cingular_US_1.03.502.07_5.51.09.06_22.30.50_RELEASE
Can I go ahead and just flash my phone using that firmware and then start updating?
Will my phone work properly or I have the change of damaging my phone?
Any help will be really appreciated. Thanks a lot.
Also this is kind of urgent, thanks.
leoramen said:
Hello
I have an ATT HTC Surround Y8788 it is unlocked to use with any SIM anywhere.
OS Version 7.10.8107.79
Firmware Revision 2250.21.40300.502
Hardware Revision 0003
Bootloader version: 1.52.2250.4 (120323)
Chip Soc version 2.2.5.0
This phone came with a DFT firmware and it looks good, however it keeps crashing and the phone reboots by itself for no reason.
Therefore, I want to go back to a stock rom and start freshing updating to where it's possible using Zune.
Now my question is, I downloaded this firmware: RUU_Mondrian_Cingular_US_1.03.502.07_5.51.09.06_22.30.50_RELEASE
Can I go ahead and just flash my phone using that firmware and then start updating?
Will my phone work properly or I have the change of damaging my phone?
Any help will be really appreciated. Thanks a lot.
Also this is kind of urgent, thanks.
Click to expand...
Click to collapse
You can use that but it is a VERY old ROM for the surround. I suggest you to stick with the RUU_Mondrian_Cingular_US_1.52.502.04_5.66.09.09_22.46.50_RELEASE which is a more recent ROM. 1.03 had a lot of problems on my surround.
Download:
http://forum.xda-developers.com/showthread.php?t=1051579
thanks I tried with that one, but I got an error when trying to flash it, error 226, it gets to 10% and then the phone reboots and the flash is cancelled.
Hi, I'm trying to investigate whether my samsung focus (SGH-i917) can be flash upgraded with a windows phone 7.8 ROM. I've seen custom ROMs available for rev1.3 or rev1.4, so I began trying to figure out which one my phone is.
There is no such revision is listed on the label behind the battery, and when I check via the diagnosis application I see this:
HW VERSION: REV0.8
I can't find any reference to a focus hw revision 0.8 anywhere online. This is confusing to me because 1.3 is referred to as "first generation".
Has anyone heard of hw revision 0.8? Am I simply out of luck?
Much appreciated, my full Settings > about info:
Name: SAMSUNG SGH-i917
Model: SAMSUNG SGH-i917
Carrier: AT&T Wireless
Software: Windows Phone 7.5
Total Storage: 7.39 GB
Available storage: 5.61 GB
OS version 7.10.7720.68
Firmware revision number: 2103.11.8.1
Hardware revision number: 3.1.0.7
Radio software version: 2103.11.8.1
Radio hardware version: 0.0.0.8
Bootloader version: 5.8.0.2
Chip SOC version: 0.36.2.0
HW revision 1.0 was sent to developers or was a DEMO phone. Older revisions than 1.0 must be test builds.
It should work flashing 1.3 (as the hardware is the closest) but there's no guarantee it will work. A few users in the forum reported success flashing 1.3 when they realized they bought a 1.0 (which was not supposed to be sold).
Also, the fact that it's updated to 7720 kind of suggests it will work.
EnderPsp said:
HW revision 1.0 was sent to developers or was a DEMO phone. Older revisions than 1.0 must be test builds.
It should work flashing 1.3 (as the hardware is the closest) but there's no guarantee it will work. A few users in the forum reported success flashing 1.3 when they realized they bought a 1.0 (which was not supposed to be sold).
Also, the fact that it's updated to 7720 kind of suggests it will work.
Click to expand...
Click to collapse
Thanks very much for the info, I'll give it a try and report back on whether it works or not. If I brick it then I suppose it'll be be the universe's way of telling me I should just upgrade already.
alavers said:
Thanks very much for the info, I'll give it a try and report back on whether it works or not. If I brick it then I suppose it'll be be the universe's way of telling me I should just upgrade already.
Click to expand...
Click to collapse
If it bricks (I doubt it), you should be able to flash the stock rom without issues.
I managed to install http://forum.xda-developers.com/showthread.php?t=2016769 without a hitch, the phone is now running 7.10.8858.136.
Thanks again!