Related
Self-dangerous noob here. NC 1.2, theoretically returned to stock
History:
Got NC 1.2
Rooted w/ManualNooter 4.5.25. Everything seemed to go great. So...
Downloaded, backed up, and flashed CM7 in ROM Manager
Wouldn't boot...hung on n COLOR screen
Same results w/ Phirerom (CM7 based - doh)
Able to restore MN4.5.25 from CWM - BUT noticed "Error formatting /data!" during nandroid restore. Didn't seem to matter...restore successful
Get "Error formatting /data!" no matter what
Able to boot into CM7 from SD, but it has "problems". For instance, there are no "back" or "return" softkeys. So there is no way to navigate around any app! Only the hard "n" home key works
Reflashed stock 1.2
Seemed to work, began to ask me to reregister. BUT, it won't display the keyboard, so I'm stuck at the "Login with your existing B&N...." screen! Keyboard flashes up and then immediately disappears!
As an noob, it occurs to me that all my problems are related to my inability to format the /data partition (if it's even called a partition).
Can any of you awesome people help me? And, if I'm in the wrong forum, any directions would also help. Thanks.
Same error here
If anyone can help with this it would be much appreciated.
have you tried removing CWR then do the 8-boot reset?
No, every time I've done it, it boots into CWR. Maybe REMOVING it will help. lol. Sorry to be so inept. I can flash the 1.2 stock that will remove CWR. Is that the way to do it?
Worked like a charm
Removing CWR and 8-boot-interrupts did the trick. I'm now back to a fully stock NC 1.2.0. Ready to roll up my sleeves and re-brick!
This is the most amazing community. The closest thing I have to any technical knowledge is speaking a little Klingon. VERY little. But, I have learned more here by reading these threads for a couple hours...OK, several hours... than my wife has learned in a dozen trips to the apple store. I feel more empowered every day. You are all great. Can't thank you enough.
Goldie, I wasted a bunch of time on this last night. I'm guessing you have a new nook. If you do, slap cwr on your SD (3.0.2.8 or something) and look for the thread that tells you how to repartition your nook. Follow instructions to set it to the old way. After that run manualroot zip through cwr. Reboot to cwr and wipe data, system, cache. Finally install your rom of choice from your SD card through cwr. That's what I did to finally get it to work.
Thanks. I'll give this a try. As you probably guessed, I DO have a new NC, and while I was able to get it back to 100% stock, and easily reregister it, I had the same results. The ONLY way I can get CM7 running is off the SD card. So, I'll try the partitioning trick. Why do I get the feeling this is going to work? Unfortunately, I'm not on dev's time... I'm at work by 7:30am EDT, but in bed pretty early. I REALLY appreciate the response. Later this week I'll install SDK, and all my tools at home so I'll be able to stay up all night with you awesome folks.
still looking for the thread on re-partitioning. I found the thread on restoring, but I get the error every time I try to reformat the /data.
No luck. I can restore to stock 1.2, reregister, and MN 4.5.25, all easily. BUT, once I flash CM7 (or Phiremod 6.3, etc.) it hangs at the "n C O L O R" screen (C O L O R flashing at various speeds just to fool you into thinking it's actually going to work). Here's what I've noticed...after flashing CM7, the ADOBE screen no longer flashes up at boot. Once it fails to boot the Adobe software, it won't boot at all. So, for now, I guess I'm running CM off my SD unless anyone can suggest anything.
Goldie u have to repartition to get it working. Ill go look for the thread. Also maybe you should try out the cm7 mod over the phiremod Tom. I'm on phiremod now and the lag is killing me
Wow that was painful to find. Needs a sticky.
http://forum.xda-developers.com/showthread.php?t=1094371
Edit: I take that back about the lag, set your cpu to 1200 in the ROM and change yourgovernator to interactive for an amazingly smooth experience
I've been going nuts trying to figure this out. I too ran into the "error format /data" message but I powered through it only to end up at at the Android logo--nothing. Out of frustration, I returned to CWR and wiped everything--like on my Evo (did not go through to mounts option). That seemed to go through /data but I don't know the difference between a wipe and a format (I'm looking...). Still got bootloops. I tried to return to stock but the 8 interrupts wouldn't work.
Pressing START and N worked though and that got through to CM7 and it's working great now but I'm afraid to do anything else because I still get the "error formatting /data" message.
I've heard horror stories (bricking beyond repair--if that's possible) of users repartitioning their drives though so... I hope there's another solution out there.
I love this community!!
Sys:
Thanks a million!! Everything perfect!! I just can't say enough about this awesome community, all the amazing devs.
heh you're more than welcome . i hope this helps anyone else that stumbles on your thread as well. Ive been having fun with my nook but i think its time to trade it out for something a little bigger. Maybe ill just wait till att gets its flavor of gs2 idk. So many choices out there!
thanks guys!
i just had the same problem and falshes all kinds
of zips until i found this post.now i've launched cm with status bar
really really thanks
this worked great for me too! i had a nookcolor bought in december and it had a messed up chargerand 6 really bright white spots that were really noticiable. went to b&n store and the guy just gave me a new one. it came with 1.2 and i had the cwm sd from the old one. so tried restoring my cm7 backup from the old one and error formatting data came up. flashed this zip, and im wondering, since these are too different nookcolors, should i restore the cm7 backup or flash it brand new. because i had a ton of stuff on the old one and i dont want to lose it. so can i ust do advanced restore and restore data, or can i restore the whole thing or just flash and slowly get my stuff back?
update cwm
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
bl3achcrazy said:
ok not sure if you fixed it or not yet, but i had the same problem for awhile too until i found a post
your probably using cwm 3.0.0.28 just updated it to 3.2.0.1
Click to expand...
Click to collapse
i have tried 3.2.0.1 but get same error message
3.2.0.1 on the bootable card or already on the eMMC? It has to be on the bootable card.
Thanks
It works after getting my nook color around 2pm today and taking it home. I was working on this thing all day I tried several ways and this one worked!!! Having issues with wifi that's all
folks, got a nook for my birthday a few weeks ago, I followed these directions from the addictivetips site to the letter and after about 3 days got CM7 86 or 87 running w/ gapps 0307 working as well as the overclocking. I was gleefully using it until my legs went numb and 2 days ago i let someone use it who attempted to reboot but it was on restore, it restored back to nothingness. Me, being in IT for the past 15 years know that testing and backing things up are for wimps, so no, I have no backups. Anyway, i have tried to put on the latest nightly CM7 (116), I was trying with the nightly, the latest gapp and the overclock. I get the green CYANOGEN logo which on the newer versions says "Loading", then it vanishes and I'm back in limbo. So i then formatted my sd card, redid all the steps and tried 87 by itself w/o gapps or the overclock, nothing. I cannot find a version that will boot up from the get go. I hate asking for help but am tired of getting my butt kicked by this thing. What I don't understand is I have the same version 87 that I had on it when it was working. I am using CWM 3.0.0.5.
does anybody have anything I can try because i'm getting bummed now, I don't mind hacking and trying stuff but it doesn't seem logical to me that so many different versions can all not work. Which makes me think the issue is not w/ my CM7 version.
Start over by formatting /system,/data,/cache. Then try to put CM7 on emmc
smcgov34 said:
folks, got a nook for my birthday a few weeks ago, I followed these directions from the addictivetips site to the letter and after about 3 days got CM7 86 or 87 running w/ gapps 0307 working as well as the overclocking. I was gleefully using it until my legs went numb and 2 days ago i let someone use it who attempted to reboot but it was on restore, it restored back to nothingness. Me, being in IT for the past 15 years know that testing and backing things up are for wimps, so no, I have no backups. Anyway, i have tried to put on the latest nightly CM7 (116), I was trying with the nightly, the latest gapp and the overclock. I get the green CYANOGEN logo which on the newer versions says "Loading", then it vanishes and I'm back in limbo. So i then formatted my sd card, redid all the steps and tried 87 by itself w/o gapps or the overclock, nothing. I cannot find a version that will boot up from the get go. I hate asking for help but am tired of getting my butt kicked by this thing. What I don't understand is I have the same version 87 that I had on it when it was working. I am using CWM 3.0.0.5.
does anybody have anything I can try because i'm getting bummed now, I don't mind hacking and trying stuff but it doesn't seem logical to me that so many different versions can all not work. Which makes me think the issue is not w/ my CM7 version.
Click to expand...
Click to collapse
Weird, exact same thing happened to me. I tried nightly 116, as well as an older one that had worked for me previously.
I repartitioned and restored prior, and it was fine at stock 1.0.1 that way, so...
I put the froyo 6.8.2 on last night and it works fine so I'm trying to decide if I'm just going to roll w/ it, it at least proved to me that the hardware is fine though. I may have a kernel issue although I have no idea how to check what kernel I currently have.
FYI, I repartitioned and reformatted 0p6, 0p7, 0p8, using flashable zips from the the following:
http://forum.xda-developers.com/archive/index.php/t-1094371.html
I had supposedly repartioned and reformatted before, but it must not have worked because my data was still on /media. The above link worked however. I then flashed the new CM7 RC, and gapps, and it seems to be working. Maybe give it a try. I am also using the bootable sd cwr 3.0.2.8, which I wasn't before.
You should have use this app:
http://forum.xda-developers.com/showthread.php?p=21959334#post21959334
Lets you switch between different versions of android with ease!
I purchased my NC used and with CM7 installed. I loved it the way it was except for the outdated flash player.
I forgot it in my car at work and it was all of 7* that night. Once I got home it took an hour to start up and now its just a regular NC, no Android. When I try to do the introduction registration, it connects to WiFi but tells me it cannot register at this time and gives a number to call.
I didnt mod the Nook what so ever but with the help of this site I did mod my HTC Incredible with excellent results. Id like to have Android on my NC like before but Id like to run a updated verison with Flash 11 if possible.
Please help a Nook Newbie !!! I know there is a TON of info on this device here but it gets pretty confusing pretty fast.
Was CM running on eMMC? I don't know why it wouldn't connect, but maybe something cold related caused the device to boot and continuously fail, doing the 8 failed boot restore?
You can't register it probably because the person you bought it from never de-registered it. Time to do a full reinstall of CM7. There are a ton of posts that describe how to do it in detail. Just use the search function.
LOL
You left your NC running CM7 (just to make fun, I assume it's installed in eMMC) in the car with temp. around 7 and after a nite, it automatically reverses back to bone stock, LOL
Man, if it's true, it gotta be an EASIEST way to restore stock ROM, crackinggg
Back to your case, for some reason, I do think your NC running CM7 off uSD and when it booted up, couldn't get into uSD so it booted directly to eMMC. Hope that's the case.
I bought it without an SD card so the mod was already installed on the NC internal memory. V
Ive read thru alot of info on here but still a bit confused. Im also wondering if having CM7 previously installed will cause me any problems trying to flash a different ROM.
pwrshft99 said:
Im also wondering if having CM7 previously installed will cause me any problems trying to flash a different ROM.
Click to expand...
Click to collapse
It won't if you wipe the caches for a full reload. Keep in mind that if you are the least bit hesitant you could just as easily make a bootable SD card and have no worries.
pwrshft99 said:
I bought it without an SD card so the mod was already installed on the NC internal memory.
Click to expand...
Click to collapse
For real???
How can that be possible?
I don't mean to not believing in you but it's too odd.
Well, after a few weeks of reading posts, even opening up the hardware and taking the nook apart, here I am asking a question. I figure I would go to the source rather than those other place I was reading and tryign to get info from (mot os those places link here anyway). I know that everyone says that the nook is "unbrickable;" while I want to believe it, I may be in a place where it may be true.
I do want to add a thanks as well, since the NC "tablet" has been very handy, and my wife and I have really enjoyed it. Wouldn't have happened without you all. I wish I had more time to participate in developing, but working 80+ hours/week in a hospital limits my free time, as you can imagine.
I rooted the NC and installed Cyanogenmod 7 back in July 2011. It was a 1.1 model (if I recall correctly). I installed the mod to EMMC, along with CWM. Things ran fine for 6 months. Literally no issues. Then, one night the battery was dead, so I plugged it into the computer USB to charge while the machine was off. Didn't touch it at all. When I went to turn it on again, I was stuck in a bootloop. It would go to the cyanogenmod screen and say "Loading" then would start over again. So, I naturally made a bootable SD card, and tried going into CWR to fix things. However, the SD card had the bootloop as well. It would get to the two skulls and "Loading", flash blank, then start over again.
That went on for a while. I couldn't boot into anything, not into recovery, alternate images, literally nothing. So, I tried different images --- nothing. Finally, I did the power+n and got into the only screen that wouldn't keep resetting. It has blue text and says "Entering boot menu". The menu says "Encore U-boot Menu by j4mmr. 1.2 port+ extras by fattire." From this screen, I can navigate and change the boot options. However, once again, whatever I try does not actually boot, regardless of what I set it to. The only thing that I got from getting here was no more boot loops. After getting it to this point, I can try loading anything, and it will start, then the screen goes black/blank, and nothing happens. Left it on for hours to test.
Since that point, I have switched cards (SanDisk 2 GB class 4, Patriot 8 GB and a generic 8 GB microSD). I know that cards work correctly because I got a hold of a second nook, and they work fine on it. Below are a list of all the images I have tried to run off the SD. Again, nothing will boot, not even clockwork recovery/clockworkmod.
128 mb rootpack (IOMonster)
clockwork 3.0.2.8
clockwork 3.2.0.1 eyeballer
Nooter
Mirage_CM7_ICS_CM9_DualbootSD (this card works great on the working NC)
TWRP 2.0 RC0
Generic SD
Clockwork 0.7 -> starts boot loops again
I also tried ADB, connecting to the computer and using putty over SSH. Didn't work. 8 interrupted boots with 9th holding power+n. Nope. I even took the nook apart and disconnected the battery. Still no go.
If I recall, I think I had CWM 3.0.0.5 installed to the card and to the emmc.
If anyone has any other ideas, I could really use the help. I consider myself pretty computer literate (build my machines, coded in my spare time in the past, hacked a lot of my electronics). I have read many guides/sites and even tried the outdated stuff. Once again, I cannot get into clockwork recovery, so any guide that says to do that as the first step will not work. I also cannot boot off of the SD on cards that I know function.
Would using an older version of CWM (prior to 3.0.0.5) work? I think I remember reading a bunch of stuff about problems people were having with that version. The thing is, I wasn't installing or flashing anything new. I wish I was, because then I would know what was happening when everything got screwed up.
Thanks a bunch in advance for your guy's (gals?) time. This has been really painful.
Wow, that must be frustrating. First make sure you didn't change the boot settings to something other than the SD card when you were in the boot menu. As long as the Nook is powering on and doing something you can probably save it from being a brick.
I would start with a newer version of ClockWork Mod Recovery here: http://mrm3.net/blog/2011/03/11/nook-color-updated-clockwork-recovery-bootable-sd/
There is a contradiction in the file names but the actual version should be 3.2.0.8. If that doesn't work then you may want to go back to an older version. In that case I would still load a newer version's zip file onto that card, so that if you do get the older version to boot you can use it to flash the newer version.
Before going back to older CWM versions though give this a try if the new CWM above doesn't work http://forum.xda-developers.com/showthread.php?t=958748
JP
Yeah, it has been frustrating, especially not knowing what happened in the first place. I actually did try the version from that first link (where I put 3.0.2.8). Again, the big issue I am having is that I cannot even get into the CWM. If I could, I could fix it. I also saw and read through that xda thread you kinked to (open right now in my browser), but the problem remains that I cannot even get to the point where I can flash something.
Thanks at least for responding. I'll try a few more things and see if it works, but I am running out of ideas.
In theory creating a bootable CWM card will get you into recovery even though you can't access the Recovery on the internal. Once you reach Recovery from the SD card you can flash whatever you need. It is just a matter of making a bootable recovery card that boots far enough to get you there.
In theory, yes, but as I said in my first post, I tried all the bootable cards without any luck. When I try to set the SD card as primary boot from that one screen from fattire, it locks and never restarts.
J515OP said:
Wow, that must be frustrating. First make sure you didn't change the boot settings to something other than the SD card when you were in the boot menu. As long as the Nook is powering on and doing something you can probably save it from being a brick.
I would start with a newer version of ClockWork Mod Recovery here: http://mrm3.net/blog/2011/03/11/nook-color-updated-clockwork-recovery-bootable-sd/
There is a contradiction in the file names but the actual version should be 3.2.0.8. If that doesn't work then you may want to go back to an older version. In that case I would still load a newer version's zip file onto that card, so that if you do get the older version to boot you can use it to flash the newer version.
Before going back to older CWM versions though give this a try if the new CWM above doesn't work http://forum.xda-developers.com/showthread.php?t=958748
JP
Click to expand...
Click to collapse
This happened to me a couple of times on CM7. Don't know why, but I believe I used the last method listed to repair it. There was an older version of CWM that would cause this sometimes. When you get it going again, you must update CMW to the new one.
DigitalMD said:
This happened to me a couple of times on CM7. Don't know why, but I believe I used the last method listed to repair it. There was an older version of CWM that would cause this sometimes. When you get it going again, you must update CMW to the new one.
Click to expand...
Click to collapse
How did you get it to boot into CWM in the first place in order to flash? That is my current problem. Any method of fixing relies on the ability to boot into CWM from the SD card, which (for whatever reason) isn't working at the moment.
Well, tried to use the native Nook u-boot. Get the "Touch the Future of Reading" screen, then black, just like with any of the other cards. On the good nook, it boots into a linux file and runs the recovery script, so it is not the card reader or the SD card.
Well, still doesn't work. I guess I officially bricked it without even knowing what happened. Bummer.
czarofthefrozentundra said:
Well, still doesn't work. I guess I officially bricked it without even knowing what happened. Bummer.
Click to expand...
Click to collapse
You said you tried eyeballers 3.2.0.1 CWM. Did you mean the 1GB image file he posted on his thread? And how did you burn the image to the card? You should be using win32diskimager running in administrator mode on Windows. And it is best to use a cheap card reader rather than any card reader built into your PC. The nook can be really finicky about how the card is written.
leapinlar said:
You said you tried eyeballers 3.2.0.1 CWM. Did you mean the 1GB image file he posted on his thread? And how did you burn the image to the card? You should be using win32diskimager running in administrator mode on Windows. And it is best to use a cheap card reader rather than any card reader built into your PC. The nook can be really finicky about how the card is written.
Click to expand...
Click to collapse
Yes, I tried that image from his thread. I always use win32diskimager and use a card reader. I have working cards (I have a second NC that runs fine); there is just something wrong with the boot process, and I cannot get into CWR to fix it. It starts, but then never makes it in or reboots. Only time I can keep it from rebooting is by holding "n" and going into the boot option menu.
czarofthefrozentundra said:
Yes, I tried that image from his thread. I always use win32diskimager and use a card reader. I have working cards (I have a second NC that runs fine); there is just something wrong with the boot process, and I cannot get into CWR to fix it. It starts, but then never makes it in or reboots. Only time I can keep it from rebooting is by holding "n" and going into the boot option menu.
Click to expand...
Click to collapse
It goes to the boot menu when you hold n with eyeballers image burned to SD? What happens when you select SD and normal? Just a hang? With 'loading' showing?
Edit: I just thought of another reason that could be causing this. There is a flag set in /rom that tells the system to try to boot into recovery. It tries no matter what you tell it to do in the boot menu. ROM Manager uses that flag to boot to recovery when you tell it to. Then after you successfully get into recovery and exit it by telling CWM to reboot, CWM clears that flag. If your recovery is borked up, you never get that flag cleared and it's an endless loop.
There are two solutions I can think of. First, use racks dual boot SD that you already have and go into the boot menu with that. Tell it to go to SD and recovery. Hopefully his recovery will load. Then immediately exit by the menu. That should clear the flag. If that fixes it and it boots to CM7, go to ROM Manager and flash a new CWM to emmc.
If that does not fix it search xda for 'fix recovery'. There is a nook thread telling how to fix the recovery on emmc.
Edit2: I just thought of a third way to try to get it to boot. Take eyeballers 3.2.0.1 CWM SD and put it in your PC. There should be two files there named uImage and uRamdisk. Make a copy of them on the SD and rename the copies to uRecImg and uRecRam. Then put back in nook and reboot to see what you get.
Hmm. Thanks. I'll definitely give it a shot (got nothing to lose at this point). I'll get back and let you know if it worked or not.
czarofthefrozentundra said:
Hmm. Thanks. I'll definitely give it a shot (got nothing to lose at this point). I'll get back and let you know if it worked or not.
Click to expand...
Click to collapse
See my edit2 above for a third way to try to clear the flag.
Sent from my NookColor running ICS and Tapatalk
czarofthefrozentundra said:
Hmm. Thanks. I'll definitely give it a shot (got nothing to lose at this point). I'll get back and let you know if it worked or not.
Click to expand...
Click to collapse
Hello? Feedback?
Sent from my Nook Color running ICS and Tapatalk
Ha, I tried the quick reply function, and it didn't work. Here is what I wrote yesterday (verbatim, since I still had the window open):
"Well, so far no luck. Here is what I have tried, and the new information that I learned.
Used dual boot SD that I know works and booted into bootloader menu. Tried all different options on the SD card. What happens is that it thinks for a bit, then turns the screen black, but the boot screen never comes up (i.e. the Cyanogenmod logo that usually starts before things boot). So there must be some problem there.
If I hold down power, it will restart. Again, the screen turns black after the loading screen is on for a while (happens no matter which image I burned to the card).
I still need to try the other method (eyeballer one). I don't think the EMMC reset will work with my particular issue, as I had read that thread earlier."
czarofthefrozentundra said:
I still need to try the other method (eyeballer one).
Click to expand...
Click to collapse
If the problem is the recovery flag, the mods to the eyeballer CWM SD should work. If it does not work, it may be something else. If it does work you can flash a new CWM to emmc using another eyeballer zip. Get it here:
http://forum.xda-developers.com/showthread.php?p=21932561
You would want the first choice.
Sent from my Nook Color running ICS and Tapatalk
Cool. Will give it a try tonight and report back. Just have to find my spare SD card.
So, tried with the eyeballer, and I couldn't get it to work. One thing I did notice, though (actually by chance) is that even though the screen is black, the nook is on. I saw this because it all of the sudden started flashing the low battery screen and then turned off.
Anyhow, still looks like I am in the same position. The EMMC fix doesn't work for me because I cannot even boot of an SD card.
EDIT: Actually, I just reread your post. I didn't do it right. I am going to try again and report back.
EIDT 2: Nope, didn't work. Do I need to hold all the buttons down while booting or do something else special?
czarofthefrozentundra said:
So, tried with the eyeballer, and I couldn't get it to work. One thing I did notice, though (actually by chance) is that even though the screen is black, the nook is on. I saw this because it all of the sudden started flashing the low battery screen and then turned off.
Anyhow, still looks like I am in the same position. The EMMC fix doesn't work for me because I cannot even boot of an SD card.
EDIT: Actually, I just reread your post. I didn't do it right. I am going to try again and report back.
EIDT 2: Nope, didn't work. Do I need to hold all the buttons down while booting or do something else special?
Click to expand...
Click to collapse
I'm not sure what to tell you to do next. I guess I am going to send you to a post that tells pretty plainly how to do the 8 failed boots. I know you tried that, but timing is very critical with that procedure. Worth a try to me.
http://forum.xda-developers.com/showthread.php?p=25405429
How do you do the 8 failed boot deal with the cyanogenmod screen running. I am not sure about the timing of things. Also, which buttons? I have seen people do it with just the power button. Other places say with the power+n+vol up.
Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.
~poz said:
Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.
Click to expand...
Click to collapse
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Click to expand...
Click to collapse
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).
~poz said:
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).
Click to expand...
Click to collapse
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Click to expand...
Click to collapse
yes, thank you. I feel anything higher than CM7 just boggs the processor on these dated tablets. For a kids' tablet, it's just fine and will run most of their games/books and it remains snappy. CM10 just feels overloaded. It is sluggish and slow to respond. I'll try to get it moved back to CM7.
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.
~poz said:
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.
Click to expand...
Click to collapse
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Click to expand...
Click to collapse
Thanks Leapinlar,
Still running into issues. now on BOTH Nooks.
I was pretty sure I remember something about an updated B&N ROM that was signaled with a Green sticker on the box, which the troublesome boot one has.
I am using the generic_sdcard_v1.3.img + cm-7.2.0-encore.zip + gapps-gb-20110828-signed.zip all being burned via Terminal on Mac.
The only thing that has changed since I was dabbling with these in the past was the CM release.
I am not able to find my original bookmark of the tutorial I used to use (2+ years ago) so I think there might be a flaw in the instructions I'm following now. (for instance, the instructions I'm following now, the dd= command isn't proceeded by 'sudo' and without the sudo command, it errors out when trying to write the generic SD image to the disc (says disc is not available or locked).
gonna keep trying, because I want to get these up and working for our trip...we have 36+ hours of driving over the course of a week, so I know they'll get bored of looking at sights, reading books, watching DVDs, etc. Mainly for my own sanity, since I'll be driving.
**EDIT* i found the original tutorial I used years ago in my trove of bookmarks. It was the original GlassKeys tutorial. gonna give that a shot and report back with my success/errors.
Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Click to expand...
Click to collapse
Thanks. should have mentioned that I did rename the file to "update"
got my old CM10 to boot into Linux penguin and it seemed to be doing it's thing, after formatting the SD card following the GlassKeys instructions, but it is now booting to CM10 still by default and if I hold the "n" key for the boot menu on Cyanoboot and try to boot from SD card (normal or recovery) it just stays on that screen until I power it down.
as for the second, untouched Nook, I did the GlassKeys instructions to the SD card for that and it loaded to Penguin and went through all the install procedures, but now it still boots to the B&N emm setup screen.
wish I had never taken the other to CM10. now I have two Nooks that aren't acting properly.
thing that bugs me is the first one was running fine, just market wouldn't recognize my sign-in...now both are jacked.:silly:
SUCCESS!!!
So thank you goes out to leapinlar!!!
I dropped what I had been doing on my system as far as the files I was burning and read over all your FAQ and tutorial.
I downloaded the files in your how-to and had the tricky OE ROM flashed in a jiff!
The second one is installing now on the peguin screen and JUST now loaded to the CM7.2 bootloader screen.
Still used the GlassKeys instrucitons on how to burn via Terminal on OS X, but used your files (generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8c.zip )
My original issue, I have found through all this, was that the Market wouldn't allow me to sign in...well that is an issue with the 2-step verification for my Google account I had activated (someone tried to hack my account, so I had it on). Once I turned it off, I was able to open the market and sign in.
Thanks again for your help leapinlar....check this one off!
Going to update both tonight with our boys' fav apps and games and get ready to hit the road first thing Sat morning! :laugh:
If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.
retrobot said:
If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.
Click to expand...
Click to collapse
Thanks! but pretty happy with CM7. any more seems to be a bit much for these processors. both are up, loaded full of games/books and ready for the road trip. :highfive: