I'm using T*Omina2 (SCH-M715) same as i8000 spec
After upgrade firmware to WM6.5, I cannot use any diagnostic codes (dial codes)
except for *#06# (check IMEI)
Other codes show as: No matches:
What is lack of in my WM ? and why I cannot use dial codes ?
Thanks for any help....
Related
Is there a way to change the model no \ Device ID as indicated in Device Info > Identity ?
Did a search but could not find any info on it.
Model Number can be changed, it is help in nk.exe In the XIP and in the SPL.
The DeviceID is the IMEI, So yes technically (this is in the CID block) but its a damn dodgy area and you can easily get locked up for altering it.
Thanks for the reply. I have no interest in changing the IMEI number. I am hoping there is a way to change the hardware" id. Leaf (www.leaf.co.za) has a free navigation software programe but only for PDA's id'd as HTC. They do not want to support Imate's as they do not have the support contract for Imates.
if we want to change the serial number (not imei) of a dumped rom , how can we do it? i mean how can i change the serial number of hp rw6815 ?
Does it even store the serial number in the dumped ROM? I thought that was hard-coded into the device??
hi all, since i flashed spl all works ok except when I try and install a work application called good mssaging it says unable to retreive handheld serial number and Rom version....is there a way to electronically insert my serial number?
Thanks
Hello all,
as title today flashed my phone to get new 7.8 dynamic rom
flash goes well
but after hard reset the phone shows invalid sim card
and imei shows 000000000 (code *#06#)
any idea?
i found a guide here to use QPST but is for samsung SIII
and the 8700 have different engineering menu code...
Please save me ((
***SOLVED***
the solution is app diagnosis
enter in diagnosis dialling the code ##634##
then *#7284#
and select
Modem, Usb Diag
restart the phone and follow the guide here
thanks to Hero for the guide
This may be little bit nooby but discussing on flashing imei's is not a bit illegal-ish? It's not like jailbreaking or any kind of alteration don't you think?
i think so,
in fact i posted a link and not the entire guide
... in any case, it's not so easy to change the imei on your phone and make it functionally.
you need an imei code there is not in use in your country by another phone
and an imei phone a phone like yours according with product type.
there is a function called:
"auto provisioning"
you see you receive, with some carriers, automatic mms and internet configuration at first access?
gsm cell identify and decrpt your imei and give this info to carrier.
hope this can helps
Samsung Hidden Codes :cyclops:
Not all work due to android o.s. changes and some may be missing
*#TESTMODE#
*#03# Nand Flash Unique Number
*#06# IMEI INFO.
*#745#
*#746#
*#0011# ServiceMode
*#0514# SysDump (shorter list)
*#0808# Qualcom USB settings
*#1111#
*#1575#
*#2222#
*#2263# ServiceMode - toggle Auto/WCDMA/GSM/LTE bands and modes
*#2580#
*#2684#
*#2866#
*#7284# Qualcom USB settings
*#8888# ServiceMode - READ FTA HW VERSION
*#9090# ServiceMode - DIAG CONFIG
*#9900# SysDump
*#32489#
*#66336# ServiceMode - MDM Ramdump mode
*#123456#
*#147852#
*#279301#
*#301279#
*#369852#
*#1478963#
*#3214789#
*#3698741#
*#4238378#
*#5337632#
*#6984125*#
*#22553767#
*#22558463# ResetTotalCallTime
*#73876766#
*#99007788#
*#197328640# ServiceMode - DEBUG SCREEN (1 Basic Information - same as 0011)
*#2767*2878#
*#738767633#
*#3214789650#
*#7387678387#
*#7387677763#
*#4387264636#
*#27663368378# ServiceMode - MAIN MENU (7 DEBUG SCREEN)
*#827828868378#
*#*#4636#*#* phone information
*2767*3855# hard reset
*#*#7780#*#* factory reset
*#*#7594#*#* change end call/power option
*#*#197328640#*#* service mode
*#*#273283*255*663282*#*#* file copy screen (backup media files)
*#*#526#*#* wlan test
*#*#232338#*#* shows wifi mac address
*#*#1472365#*#* gps test
*#*#1575#*#* another gps test
*#*#232331#*#* bluetooth test
*#*#232337#*# shows bluetooth device address
*#*#8255#*#* gtalk service monitor
Samsung Secrets Code
*#*#0283#*#* packet loopback
*#*#0*#*#* lcd test
*#*#0673#*#* melody test
*#*#0842#*#* device test (vibration test and backlight test)
*#*#2663#*#* touch screen version
*#*#2664#*#* touch screen test
*#*#0588#*#* proximity sensor test
*#*#3264#*#* ram version
Samsung Secrets codes to get firmware version information:
*#*#4986*2650468#*#* pda, phone, h/w, rfcalldate
*#*#1234#*#* pda and phone
*#*#1111#*#* fta sw version
*#*#2222#*#* fta hw version
*#*#44336#*#* pda, phone, csc, build time, changelist number
*#272*IMEI# - To change the salescodes and reset the user data
WOW!! Thank you very much!!
Amazing:beer:
Sent from my GT-5660 using xda app-developers app
Do these codes work on any Samsung device or just certain devices and or do you know?
How do i get my msl code for sprint
Not work on my samsung galaxy s6 tmobile
Enviado desde mi SM-G920K mediante Tapatalk
Test
Gesendet von meinem SM-N910F mit Tapatalk
Thanks
Nice ,Thank you so much
kentek said:
Samsung Hidden Codes :cyclops:
Not all work due to android o.s. changes and some may be missing
*#TESTMODE#
*#03# Nand Flash Unique Number
*#06# IMEI INFO.
*#745#
*#746#
*#0011# ServiceMode
*#0514# SysDump (shorter list)
*#0808# Qualcom USB settings
*#1111#
*#1575#
*#2222#
*#2263# ServiceMode - toggle Auto/WCDMA/GSM/LTE bands and modes
*#2580#
*#2684#
*#2866#
*#7284# Qualcom USB settings
*#8888# ServiceMode - READ FTA HW VERSION
*#9090# ServiceMode - DIAG CONFIG
*#9900# SysDump
*#32489#
*#66336# ServiceMode - MDM Ramdump mode
*#123456#
*#147852#
*#279301#
*#301279#
*#369852#
*#1478963#
*#3214789#
*#3698741#
*#4238378#
*#5337632#
*#6984125*#
*#22553767#
*#22558463# ResetTotalCallTime
*#73876766#
*#99007788#
*#197328640# ServiceMode - DEBUG SCREEN (1 Basic Information - same as 0011)
*#2767*2878#
*#738767633#
*#3214789650#
*#7387678387#
*#7387677763#
*#4387264636#
*#27663368378# ServiceMode - MAIN MENU (7 DEBUG SCREEN)
*#827828868378#
*#*#4636#*#* phone information
*2767*3855# hard reset
*#*#7780#*#* factory reset
*#*#7594#*#* change end call/power option
*#*#197328640#*#* service mode
*#*#273283*255*663282*#*#* file copy screen (backup media files)
*#*#526#*#* wlan test
*#*#232338#*#* shows wifi mac address
*#*#1472365#*#* gps test
*#*#1575#*#* another gps test
*#*#232331#*#* bluetooth test
*#*#232337#*# shows bluetooth device address
*#*#8255#*#* gtalk service monitor
Samsung Secrets Code
*#*#0283#*#* packet loopback
*#*#0*#*#* lcd test
*#*#0673#*#* melody test
*#*#0842#*#* device test (vibration test and backlight test)
*#*#2663#*#* touch screen version
*#*#2664#*#* touch screen test
*#*#0588#*#* proximity sensor test
*#*#3264#*#* ram version
Samsung Secrets codes to get firmware version information:
*#*#4986*2650468#*#* pda, phone, h/w, rfcalldate
*#*#1234#*#* pda and phone
*#*#1111#*#* fta sw version
*#*#2222#*#* fta hw version
*#*#44336#*#* pda, phone, csc, build time, changelist number
*#272*IMEI# - To change the salescodes and reset the user data
Click to expand...
Click to collapse
Odesláno z mého GT-S7710
How can I use the dialer for ussd code if mmi code invalid?
I've tried shortcuts and advanced dialer, even WiFi calling apps
Sent from my SM-G935V using XDA-Developers mobile app