Related
Hi.
Phone is not bricked, but stuck at a moment of the boot process. Whatever I do, it gets stuck in a loop. It seems that it's a kernel issue. I've tried everything I know to fix this (kdz updater & more than 5 firmwares), unsuccessfully... It happened while flashing with a stock 2.1 firmware from a CM7 M4 ROM.
screenshot:
I think I simply ****ed the phone so it is impossible to solve that now.
Any suggest is welcome.
Fix
IT'S A KERNEL ERROR
READ ALL FIRST!!!
Have the necessary software.
- Phone Drivers
- KDZ_updater
- The Room you want to install (.kdz)
When we light up the phone and leave us this error screen:
1. Pull battery, sim, sdcard out
2. press the power key + the Volume Down key to set the phone into download mode or (Download Mode), and only then plug USB cable... (if its not recognized unplug and plug again)
3. Disable USB LG Driver Model, this will change depending on the operating system we have in the case of windows will be in Manage> Device Manager> Modems> LG USB Drive Model -> Right Click "Disable "
4. Open KDZ_FW select type 3GQCT, Phone Mode: DIAG (if not try with CS_emergency), consider the room to install (File *. kdz).
Veronica
Hey Veronica.
thanks for you attention, but I already tried every possible things at playing with kdz updater. When KDZU send the IParam 215, the phone reboots, and the error keeps happening, whatever the mode used or the firmware version.
just for saying, there is no need to hold the power buton when the battery is out. Just hold V- before pluging the usb cable.
is there a way to "format" all the datas of the phone ?
first off you do no that the only way you could have went back to 2.1 is with clockwork.
have you tried to see if fastboot works if it does flash a custom rom onto it.
Sent from my GT540 using XDA Premium App
Hey eoghan2t7
I have new events. I've just successfully flashed it with the 2.1 open + fb firmware. Now, it is stuck on the android logo (seems to load but keeps looping).
Fb seems to work (performed a reboot with cmd), What should I do now ?
ok go in to fb and run
fastboot -w then try and boot the phone normally.
Sent from my GT540 using XDA Premium App
thank you very much eoghan2t7
Phone started normally. I didn't know that to downgrade the firm it needs to do it by recovery. However, I rightly tried to flash preciesely by recovery (so wihout knowing), then I got an error and it said something like "update aborted, reboting". The kernel error appeared after that, but before I even try a normal boot. Then I directly flashed using KDZU.
So, it is solved. Thanks again.
glad you got it sorted.
Sent from my GT540 using XDA Premium App
always do a full wipe data/factory reset BEFORE and AFTER flash any rom!
Veronica
okay Ill' remember it
Hi
I upgraded my phone to 2.3.5 and after that i flashed the auroraICS ROM. Before upgrading i made a backup using CWM, and now after i used the recovery option in CWM i wont get past the huawei logo after i turn the phone on. I cant get back into CWM either it only goes to the huawei logo. Does anyone know a way to fix this? If so i would be very happy xD
So you went back from ICS to stock 2.3.5 by recovering your 2.3.5 backup using CWM, and then it wouldn't boot properly?
Do you have anything important in that backup that you want to recover, or do you just want to get your phone clean and working again?
In any case, have you tried putting an official update on your memory card and "upgrading" with the usual method (holding both volume buttons and power button at boot)?
If that doesn't work, are you able to access the pink recovery screen by holding the same buttons without the dload folder on your memory card (though you may need the card inserted)?
If so, connect a USB cable to your computer and see which folders you can see. In my experience, Windows has only seen the /.cust_backup/ partition, while (CrunchBang) Linux has seen four automatically, including the internal SD memory. Copying a dload folder to the internal memory and using the normal upgrade method without the external SD card inserted could work.
I used the backup to get rid of aurora and just get normal stock rom. I tryed to "upgrade" back to 2.3.5 using a dload folder and pink screan and it worked! Thank you! A "thanks" to you sir! Glad i didnt have to send my phone in for reparation xD
I was using miui 2.3.30 with 5.5.0.4 cwm.
I decided to try the new ics miuis around, so I updated to 2.3.5 original through dload method.
booted ok, installed cwm again by copying over recovery.img to .cust_backup/image.
Thing is I lost so much time, I wanted to go back to my stable miui. went to cwm, wiped, and restored my nandroid backup. after restore, on 1st boot it turned off.
Now, pressing power on, after huawei's logo, turns off.
vol+ power, it gests stuck on logo forever.
vol+, vol-, power, goes to pink screen even with dload folder on card.
in any of these situations, adb sees no devices.
am i definitely screwed?
TuMatos said:
I was using miui 2.3.30 with 5.5.0.4 cwm.
I decided to try the new ics miuis around, so I updated to 2.3.5 original through dload method.
booted ok, installed cwm again by copying over recovery.img to .cust_backup/image.
Thing is I lost so much time, I wanted to go back to my stable miui. went to cwm, wiped, and restored my nandroid backup. after restore, on 1st boot it turned off.
Now, pressing power on, after huawei's logo, turns off.
vol+ power, it gests stuck on logo forever.
vol+, vol-, power, goes to pink screen even with dload folder on card.
in any of these situations, adb sees no devices.
am i definitely screwed?
Click to expand...
Click to collapse
Far from it
But you tried to go back to your froyo miui while you have gingerbread (2.35) kernel. This can only be done using the dload method.
As you understand you must use a sd card with the appropriate files inside the dload folder. You have two choices.
1. Download the overseas file for 2.2.2 from here http://www.mediafire.com/?kgg7kper9hjvhi0 and after installing CWM restore your nandroid backup.
2. Download the overseas file for 2.3.5 from here http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQxODE= and after installing CWM using this method http://forum.xda-developers.com/showthread.php?t=1420728 download and install the miui version you prefer from the Ideos X5 U8800 Android Development threads.
Either way you must use a fat32 formatted sd card with the dload folder in the root directory. If for any reason it wont start the update process try without the battery using the usb cable. Again if it fails try as a last step the following:
Take out the sd card and put the battery back inside.
Then connect the phone with a usb and wait to see the battery charging icon.
Afterwards disconnect the usb, take out the battery, put the sd card back in, connect the usb and try again to flash the dload folder using the two volume + power buttons.
thanks for the reply halman.
i eventually read in another thread about trying to update without battery and it started immediately to unpack. i honestly was out of ideas already.
nothing worked, and everything hanged
i learned the hard way why you need to install official 2.2 or 2.3.5 to flash different roms. i guess it's like flashing a .32 rom into a .35 kernel phone. it's never going to work.
in the end, removing the battery and plugging only the usb cable saved me.
EDIT: i don't get it. i downgraded to 2.2, booted fine. rooted and installed cwm 5.5.0.4. booted to cwm and installed the miui version i was using before. it installs fine but hangs on boot. i've tried wiping everything several times but doesn't seem to work.
why doesn't it boot? i'm back on 2.2 (b138), with 5.5.0.4 but my miuiportugal_u8800_2.3.30.1_AIO_Signed.zip hangs on 1st boot. now what am i missing?
You should use 5.0.2.6 instead of 5.5.0.4 in froyo.
Sent from my u8800-aurora-ICS using tapa 2-5
but i was already in 5.5.0.4 before. maybe i updated cwm AFTER i was already using miui.
you're saying 5.5.0.4 isn't good to flash miui 1st time, and that i should try 5.0.2.6?
i'll never understand completely how this works
EDIT: damn using 5.0.2.6 for flashing back my nandroid backup didn't work either. this is really starting to piss me off.
EDIT 2: Finally!! had to install from fresh, nandroid backup also saves cwm lol
TuMatos said:
but i was already in 5.5.0.4 before. maybe i updated cwm AFTER i was already using miui.
you're saying 5.5.0.4 isn't good to flash miui 1st time, and that i should try 5.0.2.6?
i'll never understand completely how this works
EDIT: damn using 5.0.2.6 for flashing back my nandroid backup didn't work either. this is really starting to piss me off.
EDIT 2: Finally!! had to install from fresh, nandroid backup also saves cwm lol
Click to expand...
Click to collapse
Glad you finally got it
Regarding the CWM and the nandroid backup you should never use different type of CWM from the one you had when you created the backup. The 5.5.0.4 (Blefish) creates differnt type of files from the 5.0.2.6 (Genokolar). That's why your backup couldn't work with 5.0.2.6
halman said:
Far from it
But you tried to go back to your froyo miui while you have gingerbread (2.35) kernel. This can only be done using the dload method.
As you understand you must use a sd card with the appropriate files inside the dload folder. You have two choices.
1. Download the overseas file for 2.2.2 from here http://www.mediafire.com/?kgg7kper9hjvhi0 and after installing CWM restore your nandroid backup.
2. Download the overseas file for 2.3.5 from here http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQxODE= and after installing CWM using this method http://forum.xda-developers.com/showthread.php?t=1420728 download and install the miui version you prefer from the Ideos X5 U8800 Android Development threads.
Either way you must use a fat32 formatted sd card with the dload folder in the root directory. If for any reason it wont start the update process try without the battery using the usb cable. Again if it fails try as a last step the following:
Take out the sd card and put the battery back inside.
Then connect the phone with a usb and wait to see the battery charging icon.
Afterwards disconnect the usb, take out the battery, put the sd card back in, connect the usb and try again to flash the dload folder using the two volume + power buttons.
Click to expand...
Click to collapse
greetings...
i have the same problem.
i turn the phone on, it apires logo and than it turns of.
a already tryed a lot of stock roms. 2.2.2 and 2.3.5 but when i run pink screen, it doesn't start installing... stays pink... even with out the battery.
i tried to put the phone in charge but it doesn't apire the batery charging... does the logo loop.
i dont know what to do...
please help me.
As the title says, i formatted everything (boot, image etc) and my Phone Huawei U8800 Pro goes in blue screen or Purple Screen when i try to enter the recovery menu. I used to have CWM Recovery 5.0.2.7 and used as stock Rom Gingerbread B512. Can you help me, guide me to bring back in life my phone. Thanks in advance for every help.
avpap said:
As the title says, i formatted everything (boot, image etc) and my Phone Huawei U8800 Pro goes in blue screen or Purple Screen when i try to enter the recovery menu. I used to have CWM Recovery 5.0.2.7 and used as stock Rom Gingerbread B512. Can you help me, guide me to bring back in life my phone. Thanks in advance for every help.
Click to expand...
Click to collapse
Flash official rom or someone can post his cust backup!
do not worry.
creates a dload of ver. B521 with inside the .apk file Update _ 374,402 app_ KB file and put it in the SD. Remove battery plug USB cable and hold down the Vol + and Vol-and power button at the same time. Will upload and eventually will do several restarts
Check to myPhone. I've send you my image folder.
Here you are...
Here is my image folder if you didn' t get it...
it's an executable compressed file
https://docs.google.com/open?id=0BylL_LbM_40RQjBkOGMzUDFpNW8
Thanks guys for the answers. everything is OK now. I Flashed with the Original 2.3.5. B522 and everything is OK now.
Blue screen Problem please help i hv tried all
baggino said:
do not worry.
creates a dload of ver. B521 with inside the .apk file Update _ 374,402 app_ KB file and put it in the SD. Remove battery plug USB cable and hold down the Vol + and Vol-and power button at the same time. Will upload and eventually will do several restarts
Click to expand...
Click to collapse
Dear aal i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
shahbaz9001 said:
Dear aal i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
Click to expand...
Click to collapse
re-install offical firmware
forumber2 said:
re-install offical firmware
Click to expand...
Click to collapse
Thanx dear, but how to install these firmwares, tell me the way.
i cannot access drive or directory of device when connect to pc....
My lcd screen cracked last year, so i gave phone to local service and they repaired last week. I am trying to install a new rom for days but i cant manage.
I tried cm version13 and aurora, but my torch doesnot work. EVen in camera, in flash mode. Should i again open phone and look if there is a problem or it is about software?
And other question, i cant mount my internal sd card. WHen i open es file, it only shows /sdcard, and nothing more.
Now i opening storage, total space 1.40 gb, apps 32 mb, intrnal stroage 1.02 gb and i took of external to see. In file exploerer, again i can only see sd card0. I cant see my system or anything. 1-2 years ago i could see my system.And i connect to pc, there is only one parttion. 1-2 years ago there were 2, one of internal sd other one is phone memory.
Please help me to solve this. And i mneed a rom that is only fast and using battery nicely.
Why noone helps now i cant open phone. Swm 5.0.8 cant mount sdcar sdext and i formatted data so it cant opened. How can i fix that? I want to go back to stock rom to see if there is sd card is working and myt torch isworking.
You can mount phone on pink screen and add the latest recovery from there.
rqmok said:
You can mount phone on pink screen and add the latest recovery from there.
Click to expand...
Click to collapse
Thanks rqmok. You are a great helpful person. You are trying to help me for days.
I went into pink screen. It automatically went update (i had put dload to stockr room update ,). Then i tried to open but still rebooting without oğenning.
So i went into rewcovery but i saw that it is android recovery, not cwm i installed. So i tried a lot of tgihngs.Then i installed aurora v20, but ittis interesting, i opened phone after that insstallation. It shows 2.3.5 rom, stock rom original rom.
I did not understand that.
And my flash again doesnot work. Should i give this back to the repairman to solve?
PLease looık my pictures.
pic 1 shows my first original screen. It was cracked under door and there were a lot of scratchs on phone screen. When i opened phone ,i could see scracths. So i bought from eb ay and gave a repairer. He made it. I dont know if it was well.
Then i put my foot on it slowly, but it again cracked. But i could not see scratchs. When i opened the phone, i could only see light not scratchs. So igave to same repairer without buying a screen. Pic 2 shows my 2. screen that came from ebay, there are no sctracts.
Now , my flash is not working and torch. I tried in a lot of roms. IT is not about software i think. And i have to press a lot of times to enable phone.
What do you say about that?
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
rqmok said:
OK. Please tell me the state of your phone right now. What ROM do you have? What recovery do you have?
Click to expand...
Click to collapse
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Cursed Chico said:
I am in loop. I cant open phone so it goes into pink screen, but updating from sd card. Then it again cant be opened . So i go into android recovery and flash aurora or cyangemod it doesnot matter. Sometimes it doesnot see , doesno mount. Then it restarts and 2.3.5 stock rom. But after 1-2 restarts, i cant again open, huawei logo only appears and restarts alot of times. So i again go nito pink screen because if i go into recovery, it cant mount. Fİrstly should update.
Without sd card, i went into pink screen but my computer could not see the files.
Click to expand...
Click to collapse
You can't view your sdcard files from pink screen.
If you are able to install a ROM and make it work then that will be good. But, you have said that this happened after replacing the screen. So, if you can open the phone and check for any disconnected cables that need to be reconnected then you should fix them. There should be a video on YouTube on how to do this. If you cannot do it then you will have to get it repaired.
I dont have screwdriver, i have 3mm, it doesnot work.
But after screen replacement, i used aurora for 7-8 days. Then i thought partition was wrong and deleted wiped. Now but i cant install a rom. İ nstall aurora but it opens 2.3.5 with pink screen.
What size screwdriver do i need?
Now in android recovery i wiped daya, wip cache and then restarted, then trierd to update on pink scrteen, it gave error. So again wiped datya. Now i could open it. it shows 2.3.5. İf i restart, it will be deleted again i guess. What should i do? Wİthout power off, update? I will try to install cwm
I tried to replace recoveryimg but i failed. Because ihad to install superuser, so it rebooted and phone again cant boot up, restarting a lot of times. I dont understand what the reason is
Again, i did revocery android, wipe data and cache , then rstarted. After a few boots, 2.3.5 opened. Then i again restarted and now it is trying to start again 10. times. I n my ext sd, there are dload and other zips, that can be reason? I dont want to delete those because if i delete, it will be hard for me to insatall those files
Now it is restarted, huaewi logo appears, then pink and colurful fireworkds, than black svcreen and contunes....
After wipping, i restart and it is fine, i could go into 2.3.5. But when i again restart, smetimes it again opens but as soon as desktop opening, it starts to begin,
android stops working
calendar stops working
a lot of windows. I click end activity but it repeats alot of times.
So, my original stcok is damaged or what?
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
rqmok said:
I'm sorry I didn't reply for some time.
So, apps are force closing. Do you have system partition installed? Did you try going back to stock-partition?
Please try going back to stock partition, and if you can get logcat then please upload it here.
Thanks.
Click to expand...
Click to collapse
Not only apss, android system also huawei etc. I cant even click restart button to restart phone because of popups windows.
So when i click restart, sometimes it open 3. times but still apps closing, then restarting and cant show huawei logo. and botoing up in inifinite loop.
Stock partition, i will try but i wont be able to do it. I donthave cwm and in android recovery i t doesnot accept, cant mount sd card. I can only go into android recover, can only do wipe data cache, cant mount anything. Theen only can restart and sometimes i try to update in pink screen but failed in half of 1/2. So, how can i go to stock partition without restarting phone while open?
I think the 2.3.5 rom i downloaded (Portugal or Korean i dont remember) is can be damaged or wrong. But i think i cant change that too. I am locked.
What i should do, i dont know.
Still cant do. I go into android recovery, wipe data and then after 2-3 restart, it boots. Then if i restart, there are a lot of windows appear showingstop activities. So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. It could make updates. But after updates, again could not start. After loading huawei logo, it restarts.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart .
Please help.