Database Users

Making a "getting back to stock FW" howto

Could someone make a "howto get back to stock FW" for the tab? Lots of howto's here, but no one that reverses the process. If someone also could decrypt the file here: http://forum.xda-developers.com/showthread.php?t=889165 and upload it, it would be great. The decodertest.exe does not work.
Thanks a lot!

Why not you?

rangercaptain said:
Why not you?
Click to expand...
Click to collapse
Whowww, what a productive answer......

mondy1 said:
Could someone make a "howto get back to stock FW" for the tab?
Click to expand...
Click to collapse
Hello,
before I start
Flashing a device always comes with a certain risk - if you do not pay attention, you may end up with a device you cannot use anymore. For this reason,
* READ INSTRUCTIONS CAREFULLY ! *
If there are any videos, you can feel lucky + should watch them,
and follow the instructions step-by-step.
If questions do come up, I recommend to ask them BEFORE you flash being unsure if the settings are really ok. You can send me a PN or post in here
* * *
To go back to aka flash Stock Firmware for Galaxy Tab,
1) back up your files
2) go here: http://www.samfirmware.com/WEBPROTECT-p1000.htm
(if you have not yet registered for samfirmware, do it! Believe me, you will sure not regret it)
3) make sure to read the instructions
4) Download and read the PDF instruction guide in the link (especially the pages explaining how to pick the files for ODIN)
5) Watch the Video
6) Download: ODIN v1.7 & the appropriate Firmware for your device
- ! .. everything below here is also well described in the PDF guide .. ! -
7) Open ODIN, pick the files
(!) if you need to repair, make sure to also pick the .PIT file and tick re-partition (personally, I always flash with the .PIT file + re-partition when I flash a new firmware; only when I upgrade I do not flash the .PIT)
8) Switch the Tab to USB Debugging (Settings - Applications - Development - tick: USB debugging / go to: Yes in the pop up window)
9) Power Off the Tab
9a) I always take out the SIM Card and the External SD Card at this step
10) Start Download Mode (hold: Volume Down + then: Power, once screen starts release only the Power button; until you see the yellow droid with the shovel)
11) Connect Tab with the PC
12) now PC installs drivers & in ODIN: on the left hand corner there should be [COM:...] in yellow (this means: ODIN has recognized your device)
13) check once more if the appropriate files have been chosen in ODIN
14) once you are ready, click: START
15) ODIN will now flash - check the Message field on the left hand bottom
(!) don't run anything now, leave the PC and the Tab, and let ODIN do its work, it will take a few minutes
16) once ODIN is done it will say: "PASS" in green on the top left hand corner & the Tab will reboot
- the reboot will take longer than usual, let it fully reboot!
In my case, after flashing Firmware my Tab was in Russian language - I had to go to Settings and set my language to English (if you need help let us know)
Let me assure you that I have flashed two times using Firmware from SamFirmware.com and both times, everything went really well!

Thanks man! You're the best!

you are very welcome /
only a few days ago, I was sitting with my tab in my hands, the tab was stuck in boot loop, I was totally frightened of having ruined it .. asking myself exactly the same question: "How can I flash a stock firmware?"
.. Users sharing experience and helping each other out this is what this forum is here for

I followed your description and it seems everything went well! I still have a question, though; When I connect the tab with Kies, it says under "firmware information": This version of the unit can not be updated" (it's in norwegian, I have translated it so it might not be word-by-word the same as in the english version). The question is: how come?
When I now enter *#1234* the tab states:
PDA: P1000XWJMF
PHONE: P1000XXJMA
CSC: P1000SERJM4
Thanks!

pakalrtb said:
Whowww, what a productive answer......
Click to expand...
Click to collapse
I was inviting someone to research and study, then share their new knowledge. That is what pushes android development forward. My suggestion could have benefited many! At least I wasn't bashing anyone!

http://www.youtube.com/watch?v=kzi_U-fH5Us

That is amazing! Can I suggest adding a few key words in the description? No, nevermind, the title is perfect. Good work!

I was going to follow this guide to see if I can get my VZW USA Tab back to stock because it constantly force closes everything.. I just can't figure out if my firmware is on that website. It says if your from America you shouldn't flash any of those firmwares.. Is there any firmware that I can use for my Verizon Tab?

rangercaptain said:
That is amazing! Can I suggest adding a few key words in the description?
Click to expand...
Click to collapse
Absolutely please, go ahead!

Hmm, I was considering flashing my Verizon Tab as well with a custom ROM, but from what I am reading it still seems to be an iffy process.
If I were to go ahead and attempt it can anybody tell me if any of the ROMs out right now offer signifigant improvements over the stock? And since it is a Verizon Tab would the procedure for flashing a ROM as well as flashing back to stock be the same as the other carriers? Many kudos to the person who gave the detailed response about flashing back to stock, but I just wasnt sure if it applied to Verizon's version as well, as it's the Tab I've found the least info about.
Edit: Just for clarity, making the Tab into a phone isnt something I'm too concerned about...just wanted to slip that in as it seems to complicate the process of flashing these things much more.
Sent from my SCH-I800 using XDA App

QueenAmy:
I follow your instructions exactly, adding PIT file and my fw which is P1000JPJM4
I get Pass in Odin 1.7
when the tab reboots, it takes me to recovery menu 3e automatically and get this on the screen:
-------------------------
update media, please wait
E:Can't mount /dev/block/st110
(invalid Argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
--------------------
what Should I do?
I flashed using odin 1.7 like 4 times, with each time I get PASS, but after the reboot , I get the above text.
Should I select (WIPE DATA/FACTORY RESET) ?
and
Wipe cache partition?
please help me, I really appreciate the few minutes you take to reply me.
thx in advance
EDIT:
I tried wipe data/factory reset, then reboot
Now I m stuck in a boot loop with the word SAMSUNG and vibrations, nothing happens

Willy318is said:
QueenAmy:
I follow your instructions exactly, adding PIT file and my fw which is P1000JPJM4
I get Pass in Odin 1.7
when the tab reboots, it takes me to recovery menu 3e automatically and get this on the screen:
-------------------------
update media, please wait
E:Can't mount /dev/block/st110
(invalid Argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed.
--------------------
what Should I do?
I flashed using odin 1.7 like 4 times, with each time I get PASS, but after the reboot , I get the above text.
Should I select (WIPE DATA/FACTORY RESET) ?
and
Wipe cache partition?
please help me, I really appreciate the few minutes you take to reply me.
thx in advance
EDIT:
I tried wipe data/factory reset, then reboot
Now I m stuck in a boot loop with the word SAMSUNG and vibrations, nothing happens
Click to expand...
Click to collapse
See my reply in this thread
http://forum.xda-developers.com/showthread.php?t=920844

Thank you, indeed that fixed the problem, I'm now on the JM4 FW.
Was Lost w/o you, thanks much for your help, truly appreciate it.
Will

[URGENT] Help please, I have screwed my Vibrant

Hey guys Im not sure what I did. I think I had put a wrong file on the ODIN and now my phone all it do is it goes to system recovery by it self. I choose the option for reboot system now and right after the Vibrant Samsung black screen its goes to the recovery screen again giving me this error.
--Movi_check Start..!!
checksum confirmation need_checksum[0]
Not need checksum confirmation
--Movi_check already executed!!...
--movi_checking done..
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepare yet, please use UI me
nu for format and reboot actions.
copy default media content failed
What can I do please?

can you go to DL mode?
Sent from my SGH-T959 using XDA App

I have a solution to this. Ufffffffffffff I was scare for a bit. Im learning from my own mistakes. lol Im a freaking NooB unfortunately. lol
I put my vibrant on Download Mode by
removing the battery
pressing Both Volume Buttons and plugging the data cable to the phone while putting the battery again and wallaaa Im at DL Mode
Now this is what i did to fix the error
I Opened the AIO Vibrant Toolbox
Selected the option Flash to Stock
It took me now to Odin3. [Android + SLP]
I selected the PIT file and the PDA tar file
Hit Start and wallaaaaaa it Fixed my problem.
Now I will root to upgrade to version 2.2 Froyo using the Samsung Kies Software and goes from there to install ClockWorkMod
Will report on my other thread how it went as i had problems with installing the CWM.
This forum ROCKS!!!!!!!!!!!!!!!!!

Do NOT use Kies. It flashes a bootloader which has a high chance to permanently brick your phone in the event of a bad flash.

Sdobron said:
Do NOT use Kies. It flashes a bootloader which has a high chance to permanently brick your phone in the event of a bad flash.
Click to expand...
Click to collapse
Ok thanks for telling me, so in this case what should I do?

Root and download one of the custom ROMs here then flash it using Clockworkmod. Trigger or Bionix are the two I'd recommend most.

Samsung Tab Help

ok so just a little background, i have rooted droid incredibles, droid x, droid x2, hp touchpad, a few iphones and ipod touches, and some other odds and ends, so i am not a super noob or anything...
but here goes I recently acquired a samsung galaxy tab I800 (wifi only)
when i received it it was stuck in a boot loop and just kept rebooting the Verzin logo over and over again
i can get it into recovery, and the downloading thing while connected to pc
so i have tried heimdall way of restoring or what not..
i know nothing about this SGT, pretty sure its not rooted, but i wouldnt know, and i have no idea what happend to get it into the boot loop,
i have read MANY posts and did alot of searching over the last week and a half before i decided to post..but i must be missing something,
and i really need some assistance...
so if someone can help guide me through this i would be greatly appreciated
Thanks

a bit misleading
SCH-I800 is not wifi only. It is a CDMA device.
P1010 is wifi only.
Look for post on CDMA (sprint/verizon the same).
I can't help much since I don't know about CDMA device.
Good luck.

thanks for the info that i was getting mixed up...its is defiantely a sch I800 which is what it says on the back.and likei said i dont know alot about this tab, just what i was told, which was that it was wifi only..but that was definately wrong info according to what i am told now.
either way i am still stuck on the verizon screen. i also tried the heimdall again see maybe if it would take this time, but still no luck, i feel like i am using the right firmware but i am going to start from scratch now and see if i can get it going..too much misinformation in my head..lol
but if anyone can shoot me in the right direction i will be checking back here alot to see whats up..
thanks again
and thanks to priyana hopefully i can get this thing working..
here is a link to my most recent try
http://forum.xda-developers.com/showthread.php?t=967175&page=13
its in the post by justin buser post #130

There are several things that make ur device stuck on verizon bootloop.
It can be bad partition system(the wrong pit)-happens when ppl try incorrectly upgrading from froyo to gb/ics, or gb to ics, vice versa.
It can also be incomplete rom - flash interruptions, missing system folders etc.
Go to recovery and check if you get error msgs when you do factory reset wipe and data cache wipe.
Your best bet is to flash a cdma rom with repartition option and tlinclude the correct pit file. You can do it via heimdell or odin.

yappoe said:
There are several things that make ur device stuck on verizon bootloop.
It can be bad partition system(the wrong pit)-happens when ppl try incorrectly upgrading from froyo to gb/ics, or gb to ics, vice versa.
It can also be incomplete rom - flash interruptions, missing system folders etc.
Go to recovery and check if you get error msgs when you do factory reset wipe and data cache wipe.
Your best bet is to flash a cdma rom with repartition option and tlinclude the correct pit file. You can do it via heimdell or odin.
Click to expand...
Click to collapse
yes i do get error messages when i try to do a factory restore and data cache wipe i could post a screenshot if that would help, i know it says something like cant mount some files located on E:
one example is
E: install_application_for_customer:cant mount data
then some more files that are unable to mount
and sorry to sound dumb but could you point me to cdma roms? and not sure what you mean about the repartition option..also where or how can i obtain the correct pit file? and as i said in first post not sure what android OS is on this thing nor do i know if it was rooted, and i have no idea how it got into this state
thanks for the help as well..i been a member on this site for a bit, but always just read and get it done, this is the first issue that i have had to post about that i am completely lost on, so your help is greatly appreciated

Can you me more details about your device like model no etc..
Here's the link to stock firmware , check if your model is listed here
http://www.samfirmware.com/
Are able to go into download mode
Volume down+power button

ronak.super said:
Can you me more details about your device like model no etc..
Here's the link to stock firmware , check if your model is listed here
i cant post links yet lol but its the samfiemware website that was here
Are able to go into download mode
Volume down+power button
Click to expand...
Click to collapse
only stuff i know about the device is what is on the back
which is galaxy tab sch-I800
i know its a 7 inch tab and is thru verizon.
do you want the sku number and stuff as well?
everything else i found out about it is in my previous posts
and yes i can go into download mode and recovery
when i try to do a factory wipe/ cache delete option it says in yellow text "your storage not prepard yet, please use UI menu for format and reboot actions" if that means anything
and a bunch of red text stating stuff about not being able to mount or open certain files on E:
i checked that site with the firmwares, but i dont see any that even say anything about I800
my galaxy tab is

Use this pit file when you flash later.
http://forum.xda-developers.com/showthread.php?p=28759501
I'll get back to you on firmware/ROM.

yappoe said:
Use this pit file when you flash later.
http://forum.xda-developers.com/showthread.php?p=28759501
I'll get back to you on firmware/ROM.
Click to expand...
Click to collapse
are you refering to the pit file that i posted ? lol

http://www.jamesriter.com/blog/tag/how-to-restore-verizon-galaxy-tab-back-to-stock/
This is the solution to your problem hope it helps
Hit thanks!!

ronak.super said:
http://www.jamesriter.com/blog/tag/how-to-restore-verizon-galaxy-tab-back-to-stock/
This is the solution to your problem hope it helps
Hit thanks!!
Click to expand...
Click to collapse
I did try that route before and it seems like it goes ok, but then when it finishes and i have to reboot (because of the verizon bootloop) and i got to wipe data and cache it has all the red text saying stuff about no being able to mount E: drive files/folders..
i will give it another try just for the sake of trying again
thanks

Hahaha.. didnt realize that. Then just use that pit file to repartition with the choice of rom.
Sent from my GT-P1000 using xda premium

Download latest heimdall you get an option for reparition check it , It'll wipe your memory!
And hit the thanks button below

I am on the same boat. My tab is ok except the kernel. I want to flash it to cm9 but heimdall is not seeing my tab.
Sent from my DROID RAZR using xda premium

[Q] bootloader kitkat gt-i9500

So i upgraded to 4.4.2 and somehow the os got into salad status.
I was wondering if there is a bootloader file that will allow be to regain hold of the that area and be able to reload a kitkat rom
i believe i downloaded prior versions of the bootloader file and it didn't work giving the error of the magic string. i presume that's for a prior to 4.4.2
But is there a bootloader file that will breath new breath into it -
If I as a 10 thumbs expert is inept, can anyone guide me to someone able to repair it, I AM WILLING TO PAY THE ASKING RATE TO ANYONE THAT FEELS UP TO THE JOB.
I will be immensely grateful to anyone that can assist this 70 y.old in need of his phone. at my age fixed income is hardship
MUCH APPRECIATED

I read your story 3 times but I have absolutely no idea what you are talking about.
- What is "salad status"?
- Do you want to downgrade your rom or do you want to reflash the rom?
- Breath new breath into it? What does that mean?

to be or not to be
before the disaster i had loaded the revosoft 4.4.2 rom at a point the phone rebooted and in middle of boot it stopped.
right now when started it stopped 3 or 4 notes before the end of the samsung tune. and it dies there.
i tried - download mode - via odin several roms although the odin message says pass, the phone still stops at the logo
recovery mode - i get an efs error and it does not load the rom, it aborts during and reboots, and it stops at the logo
i tried to load a bootloader hoping to help erase the existing failed bootloader with a fresh one. the bootloader i got failed via odin (the message on the phone was - missing magic string - and fail on odin)
that's why i asked if anyone had the new 4.4.2 bootloader to help me restart propely the phone OTHERWISE
i was willing to pay for a capable technician to do the job
better and thanks if you are able to assist
Lennyz1988 said:
I read your story 3 times but I have absolutely no idea what you are talking about.
- What is "salad status"?
- Do you want to downgrade your rom or do you want to reflash the rom?
- Breath new breath into it? What does that mean?
Click to expand...
Click to collapse

First of all:
Did you make a backup of your rom before you flashed the revosoft rom?
Can you give us the exact error you are getting in the recovery. The EFS error.

fingers crossed
1) yes i have a backup of the previous setup - and i do have full backups - so i am not worried about wiping everything
2) when i go into recovery - i get this error - without doing anything - just by entering recovery mode
e:failed to mount /efs(invalid argument) = twice
# MANUAL MODE #
--Appling Multi-CSC ...
Applied the CSC-cod : unknown
Successfully applied multi-CSC
top of the screen reads
Android system recovery <3e>
KOT49H i950xxufne4
i stop here in case you want to proceed with other instructions -
btw i tried to reload the previous backup and IT also died at the logo
thank you for your patience - always bare in mind i am willing to ship this anywhere in case it needs a good surgeon - money is no object as long as it does not cost the price of a new smartphone
sincerely
Lennyz1988 said:
First of all:
Did you make a backup of your rom before you flashed the revosoft rom?
Can you give us the exact error you are getting in the recovery. The EFS error.
Click to expand...
Click to collapse

exactly same problem , but i was running hassan rom when this happened

BRicked my note 7 AT&T please help me

I bricked my note 7 every time I plug in a charger it boots into recovery mode in The bottom it says
"no support SINGLE-SKU
Supported API-3
dm-verity verification failed...
E:Failed setting up dirty target [omc-app-link] fail to mount /system as rwE:Failed setting up dirty target
[hwr_symlink] fail to mount /system as rw"
I tried re installing stock rom but no one has it where it's WITH OUT the 60% battery update I had this happen by trying to root via the SPRINT flashing method I came across on this website I had package disabled pro on when I was rooting now before people tell me oh just return it I work at AT&T im not returning my phone I refuse to belive it's gone for good. I know someone out there has to have a solution I have tried everything search wise on google I'm tired of looking night and day
I tried to delete cache that gives an error as well even wiping the phone while in recovery mode gives an error
Is there a package I am missing that I can re install and it will at least boot up? Odin fails on me it just freezes on initilizing I try different versions of Odin none work
I get passed the initializing but then it says FAILED no other reason nothing nada please help me... I love the Note 7
I will never swap for an s7

note7kevin said:
I bricked my note 7 every time I plug in a charger it boots into recovery mode in The bottom it says
"no support SINGLE-SKU
Supported API-3
dm-verity verification failed...
E:Failed setting up dirty target [omc-app-link] fail to mount /system as rwE:Failed setting up dirty target
[hwr_symlink] fail to mount /system as rw"
I tried re installing stock rom but no one has it where it's WITH OUT the 60% battery update I had this happen by trying to root via the SPRINT flashing method I came across on this website I had package disabled pro on when I was rooting now before people tell me oh just return it I work at AT&T im not returning my phone I refuse to belive it's gone for good. I know someone out there has to have a solution I have tried everything search wise on google I'm tired of looking night and day
I tried to delete cache that gives an error as well even wiping the phone while in recovery mode gives an error
Is there a package I am missing that I can re install and it will at least boot up? Odin fails on me it just freezes on initilizing I try different versions of Odin none work
I get passed the initializing but then it says FAILED no other reason nothing nada please help me... I love the Note 7
I will never swap for an s7
Click to expand...
Click to collapse
We have the firmware and we have an app to block updates.

That page was zero help it was a firmware issue i got resolved a week ago thanks anyway haha ADMINS PLEASE REMOVE THIS OR LOCK IT IT IS NOW SOLVED

brick it too
note7kevin said:
I bricked my note 7 every time I plug in a charger it boots into recovery mode in The bottom it says
"no support SINGLE-SKU
Supported API-3
dm-verity verification failed...
E:Failed setting up dirty target [omc-app-link] fail to mount /system as rwE:Failed setting up dirty target
[hwr_symlink] fail to mount /system as rw"
I tried re installing stock rom but no one has it where it's WITH OUT the 60% battery update I had this happen by trying to root via the SPRINT flashing method I came across on this website I had package disabled pro on when I was rooting now before people tell me oh just return it I work at AT&T im not returning my phone I refuse to belive it's gone for good. I know someone out there has to have a solution I have tried everything search wise on google I'm tired of looking night and day
I tried to delete cache that gives an error as well even wiping the phone while in recovery mode gives an error
Is there a package I am missing that I can re install and it will at least boot up? Odin fails on me it just freezes on initilizing I try different versions of Odin none work
I get passed the initializing but then it says FAILED no other reason nothing nada please help me... I love the Note 7
I will never swap for an s7
Click to expand...
Click to collapse
i brick m too how do i fix it does anyone know

note7kevin said:
That page was zero help it was a firmware issue i got resolved a week ago thanks anyway haha ADMINS PLEASE REMOVE THIS OR LOCK IT IT IS NOW SOLVED
Click to expand...
Click to collapse
Thanx for helping alot by posting what you did to fix it.
Nice participation...
Where's the NO THANKS button when you need it

les_garten said:
Thanx for helping alot by posting what you did to fix it.
Nice participation...
Where's the NO THANKS button when you need it
Click to expand...
Click to collapse
sorry mate here ill do it now ignore my original reply it was an asshole move and I didnt read correctly

gtavio80 said:
i brick m too how do i fix it does anyone know
Click to expand...
Click to collapse
goto this website: https://note7alliance.com/viewtopic.php?f=14&t=4
find your firmware make sure its the CORRECT CARRIER AND FIRMWARE
download a bunch of ODin firmwares I had to try different ones because 2 out of 3 I tried FAILED to flash
I dont have my computer with me as I am replying but I think it was ODIN 11 or something I cant be exact im sorry
any way download it unzip it and then put it in a folder on your desktop try doing the AP file FIRST then do all the other ones. this part is a LAST hope. but most times ODIN Fails because the usb cable could be in the wrong usb spot usually ODIN works best with the back USB ports of computers why I have no clue lol
if odin still fails try to make sure you have the correct firmware and if you can actually get in to recovery mode your not that bad but if you cant even access recovery mode (volume down and power and home I belive is the method) than you have a harder brick to unbrick but note7alliance is a really good site it just takes alittle more time for people to respond to your support tickets but other than that it usually gets help and is strcitly note 7 information. sign up for it i did and I never regretted it and I still use my note 7 back from the dead any questions feel free to reply and ill try and help.. PS I do not really read my emails so its the reason I never got back to ya in the first place cause this site didnt really help me as much and I didnt need it after I got my issue resolved

note7kevin said:
goto this website: https://note7alliance.com/viewtopic.php?f=14&t=4
find your firmware make sure its the CORRECT CARRIER AND FIRMWARE
download a bunch of ODin firmwares I had to try different ones because 2 out of 3 I tried FAILED to flash
I dont have my computer with me as I am replying but I think it was ODIN 11 or something I cant be exact im sorry
any way download it unzip it and then put it in a folder on your desktop try doing the AP file FIRST then do all the other ones. this part is a LAST hope. but most times ODIN Fails because the usb cable could be in the wrong usb spot usually ODIN works best with the back USB ports of computers why I have no clue lol
if odin still fails try to make sure you have the correct firmware and if you can actually get in to recovery mode your not that bad but if you cant even access recovery mode (volume down and power and home I belive is the method) than you have a harder brick to unbrick but note7alliance is a really good site it just takes alittle more time for people to respond to your support tickets but other than that it usually gets help and is strcitly note 7 information. sign up for it i did and I never regretted it and I still use my note 7 back from the dead any questions feel free to reply and ill try and help.. PS I do not really read my emails so its the reason I never got back to ya in the first place cause this site didnt really help me as much and I didnt need it after I got my issue resolved
Click to expand...
Click to collapse
Thanx, I'm sure this may help someone in the Near future the way things are going.

les_garten said:
Thanx, I'm sure this may help someone in the Near future the way things are going.
Click to expand...
Click to collapse
yeah no worries I just barely use this site since I fixed my device and I barely check my emails because of how much spam I have been super busy at my 3 jobs lol

Les_garten did you get it fixed??

Clo292311 said:
Les_garten did you get it fixed??
Click to expand...
Click to collapse
I never had a problem.
Yet...

Clo292311 said:
Les_garten did you get it fixed??
Click to expand...
Click to collapse
Yeah i did