I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
i dont know if its related but i have read that sometimes its the anti virus at fault (notably KASPERSKY)
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
I had the same problem with Win 7, however when I unchecked the faster connection option on HD2 it connected, although in Win7 it had a red x in mobile connection, but on the HD2 a connection had been established.
is formatting your PC an option?
Firewall?
I have three Windows 7 machines (32 & 64) and all connect without any problem. Disconnect from your internet connection. Turn off your anti-virus and firewall and give it a shot. Do you get the window that asks how you want to connect when you plug in your cable? Do you have a functioning cable? Just because it charges does not mean it will connect for data. Will it connect to an XP machine?
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
Have you tried a different usb cable? That's the only other thing I can think of that might be the problem.
HD2 on Windows 7 Ultimate
Hi
Had the same problem, and it turned out that the USB-cable i used, was the problem.
I used the cable that followed the 12v Car Charger, and that did no good, so I went and got the cable that came in the package (chargercable) and then it was Christmas and halloween alltogether.
Works like a charm!
@djchubbs yes i have turned that off as well - along with windows firewall
@ozkaya - no formatting my pc is not an option
@johnboatcat - When i plug it in the phone instantly asks me what kind of connection i want (file transfer or active sync with the checkbox option for faster sync as well). It transfers files just fine in file transfer mode as well.
@zarathustrax i have not tried a different USB cable as i dont have access to one. I doubt something is wrong with mine however i will have to see if i can get one somewhere.
@kongsvada Only cable i have is the one that came in the box factory from HTC
Again thank you for all the replies! I really really am trying to get this to work. I have my home computer which i do everything on but i tried my friends laptop today - it has the same exact build of windows 7 on it as my home computer (if that matters) and it will not sync or let me make a partnership or anything. I plugged it in, it downloaded WMDC and installed etc, restarted the computer and plugged it in, went to active sync mode and WMDC or the sync center do not recognize it at all. Since i cant find it in sync center i cant create a partnership.
slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
OK, let me help you on this if flashing a new ROM will be your immediate task.
1) Just download the ROM that you like and rename it to LEOIMG.nbh
2) Make sure you've HSPL your LEO first.
3) Copy the renamed file into the root of your memory card.
4) Press the VOL down button simultaneously while turning ON your LEO.
5) Just follow the onscreen instructions on your LEO.
6) That's it.
the only problem that I can sense for you now is to HSPL your device because it does require connection with your PC. To bypass this connection with PC thing, do this;
a) Turn OFF your LEO.
b) Turn ON while pressing the VOL Down button together and it will enter the bootloader mode (TRICOLOR Screen).
c) At the bottom of your LEO, it will says "serial"
d) Now, connect the cable to your LEO and and your PC, the words will change to "Usb"
e) Let your PC do its work by installing the necessary driver automatically.
f) When it is done, run the HSPL program your PC. You can download it from this wonderful forum (Please search for it in the ROM development section)
g) Let the program finish and you can see something on your LEO screen in the process. Just look at it and let it finish. DO NOT TURN OFF YOUR LEO (I don't want you to brick your device).
h) When everything is done, reset your LEO and this time press the VOL Down button. This is to go back to the bootloader mode and to check whether the HSPL has been install correctly.
i) then go back to the steps (1 to 6) above to flash your new ROM.
Enjoy,
please post your result and help others too.
regards,
morisa
I had the same problem with my new computer which happend to be running windows 7 (everything was fine on my old xp machine). After much searching and trouble shooting the problem eventually came down to a setting on the motherboard (something to do with the p55 chipset). After I'd turned the c-state option on in the bios I've had no further issues.
It's a long shot but perhaps it will help you too
ok this sounds promising - i will try it this weekend when i have the time - i greatly appreciate the help and i will post results to let everyone know!
thank you all and like i said - will be trying your way soon mmorisa!
I had to change a registry setting on Windows 7 to get it to connect to my HD2... Of course I cant remember the setting, it may be this one
forum.xda-developers.com/showpost.php?p=3942556&postcount=7
mmorisa said:
OK, let me help you on this if flashing a new ROM will be your immediate task.
1) Just download the ROM that you like and rename it to LEOIMG.nbh
2) Make sure you've HSPL your LEO first.
3) Copy the renamed file into the root of your memory card.
4) Press the VOL down button simultaneously while turning ON your LEO.
5) Just follow the onscreen instructions on your LEO.
6) That's it.
the only problem that I can sense for you now is to HSPL your device because it does require connection with your PC. To bypass this connection with PC thing, do this;
a) Turn OFF your LEO.
b) Turn ON while pressing the VOL Down button together and it will enter the bootloader mode (TRICOLOR Screen).
c) At the bottom of your LEO, it will says "serial"
d) Now, connect the cable to your LEO and and your PC, the words will change to "Usb"
e) Let your PC do its work by installing the necessary driver automatically.
f) When it is done, run the HSPL program your PC. You can download it from this wonderful forum (Please search for it in the ROM development section)
g) Let the program finish and you can see something on your LEO screen in the process. Just look at it and let it finish. DO NOT TURN OFF YOUR LEO (I don't want you to brick your device).
h) When everything is done, reset your LEO and this time press the VOL Down button. This is to go back to the bootloader mode and to check whether the HSPL has been install correctly.
i) then go back to the steps (1 to 6) above to flash your new ROM.
Enjoy,
please post your result and help others too.
regards,
morisa
Click to expand...
Click to collapse
This worked great! I knew about bootloader screen, i knew i could flash from the SD card but i didn't know how to put them together. Thank you very very much for the help, now off to flashing roms!
One simple - probably stupid question:
I have seen TMOUS compatible on a few roms, however i will then read for that same rom that it is 576 ONLY - And then in another rom thread i see the creator of the rom say TMOUS compatible and then "TMOUS=1024". So what one is it!? just trying to be safe
Again - thank you all so much for the help - i really appreciate everyone that tried to help!
Edit: Just flashed the Evo rom to the phone, plugged it in and BAMN im able to sync with WMDC immediately - so thank you all so so much - super happy now with my 1024 leo!
slowestcivic,
I feel happy that you managed to do it and flash your favorite ROM with the guides I wrote.
at least i can see another smile from another happy LEO user.
best regards and don't forget to help others too.
mmorisa
slowestcivic said:
@djchubbs yes i have turned that off as well - along with windows firewall
Again thank you for all the replies! I really really am trying to get this to work. I have my home computer which i do everything on but i tried my friends laptop today - it has the same exact build of windows 7 on it as my home computer (if that matters) and it will not sync or let me make a partnership or anything. I plugged it in, it downloaded WMDC and installed etc, restarted the computer and plugged it in, went to active sync mode and WMDC or the sync center do not recognize it at all. Since i cant find it in sync center i cant create a partnership.
Click to expand...
Click to collapse
Also running Office 2010 beta can cause active sync issues
yeah i have 2007 outlook so that wasnt thr problem. Still not sure what was wrong with it but after flashing a new rom all is well
I had the same trouble with win7. What i did after i tryed evrything i could think of was dowloading the latest active sync from Microsoft. Restarted and plugged the phone in and it worked
Hi Guys,
so my problem is I cannot get the usb drivers to install on my desktop for some reason. If i plug the xoom into my brothers laptop they install right away and it works fine.
Im running win xp pro serv pack 3. and theres no download link for the drivers or i would be all set...
Ive tried putting it into debugging and still no go, ive updated my win media player to 11 as it said in the moto forums... but no good.
Im lost here and really dont wanna rip out my hard drive and slap it in a hard drive enclosure then hook it and the xoom up to my brothers laptop just to get my files off it.....
any help would be wonderful.
Thanks in advance!
There's a lengthy thread on this over at the Moto forums. Maybe you can find a tip there.
Better yet, here's the solution they found.
Yea, ive tried everything in that thread and even posted in it.. no luck tho :O(
SOLVED!
Had the same problem and after hours of searching the internet I finally figured it out on my own. As a reference, I am running Win 7 Home Premium so I cannot guarantee that this will work on other versions.
So...plug in your xoom to your computer. Most likely it will fail to install the drivers. Right click on "My Computer" and then click "Properties". Open the device manager and you should see your xoom with an exlamation point next to it(MZ604 or MTP depending on whether or not USB debugging is on).
Right click on your xoom and choose to update the driver. Choose browse my computer for driver software. Choose your C drive and nothing more in the first box and then let your computer search for the drivers. It should automatically install and should now show up as xoom.
The last thing to do is disable or enable usb debugging(depending on which one you started with...whether it was on or off) and repeat the process. Now you can access your xoom and all of the files.
Hope this helps.
I already have my samsung usb and android modem drivers installed. but everytime i plug my phone in with usb debugging on, the "Found New Hardware" window keeps popping up, why?
im not sure, but it could be the problem to why it always says "waiting for device" on superoneclick
My day job is pc tech, I have seen this a few times but going to follow the steps, first give me some info
Which version of windows?
32 or 64 bit?
How proficient are you at driver maint. *add and removeal ov drivers*
When did this start?
windows xp - 32 bit - and im pretty proficient at maintenance. i think its always been like this.
Ok, Do you always use the same USB port? and have you tried a different cable? and have you tried it on other computers? if so did it do the same thing there?
First we got to get rid of the drivers on the pc.
http://download.cnet.com/DriverMax/3000-18513_4-10572602.html
This is a free program that has a few nice features but most important is that it can tell you the name of the files that are used as drivers. After you install and register (its free, they just want to know who you are.. name, email, that kind of stuff) there will be an entry on the right side called "Installed Drivers Report". Make sure you phone is connected before you click this as it scans active drivers. it will generate a report you can scroll through and find any samsung driver entrys. Write down those file names, we will need them in a moment.
Go to device manager and remove the device there. Windows XP was kinda lame about device removal it did not actually remove the device just broke the connection. Vista and 7 give you the option to actually delete the files which make this easier. Since your on XP after the devices have all been removed UNPLUG your phone from the PC then start a search for those files in the Windows directory. Delete (or move) those files and the rerun the driver install program from here
http://forum.xda-developers.com/showthread.php?t=728929
After that it may setup and find new hardware a few times. Mine did it 3 since there are multiple different methods it can connect with and each uses differnet hardware. Also each time you use a differnt USB port it sees it as new device in a new location so it also goes through new hardware setup again.
Report back and let me know if this helped any.
okay thanks for the quick response. i will try it when I have time and ill get back to you. first, imma try it on a different computer.
also, when its plugged in and i open device manager, theres 3 yellow exclamation marks, one on the android modem, device, and in the "OTHER devices" section, the USB controllers. if that means anything.
just turn off usb debugging... and it will stop. turn it back on if you need to use it for something.
Ok so here is some back story i messed up my rooting manual and got it stuck and the kindle logo, so on i whim i installed this and pressed option one boot mode and normal boot and that got me out of it and my kindle would connect fine but ever since i 'installed' the drivers my computer with (kindle utility) no longer recognizes or assigns a drive letter for the kindle fire.
kindle fire utility says 'oops... unable to locate device' no matter what option i choose.
i have tried the search button but i am unable to locate a solution or even anybody else with similar problems. i will admit i may be blind so i may have read it and simply forgot but if anybody can help me to figure out WHY there is a communication error going on now i would greatly appreciate it.
http://forum.xda-developers.com/showthread.php?t=1417284
http://www.jayceooi.com/2011/12/29/how-to-install-kindle-fire-adb-usb-driver-video/
It wont recognize it in device manager and this is what i see in hardware area There is no option to update drivers
sorry i can't see anything on your thumbnail - it's too small
anyway - the first link is to a site with alternate drivers - i would download them and try to install - goto device manager - look for kindle or android phone-adb device or unknown - right mouse click - update drivers - search by yourself - select the ones you downloaded (and hopefully unzipped to a location) - it's the location with adb_usb.ini
THANK YOU SO MUCH!!!! you made my day i updated that and it worked THANK YOu
glad that i could help you ...
Hi, I hope someone can help me. I have the following error at boot and the tablet stops at this error: Boot Verified Failed...
Short story is that I have spent the last two weeks trying to correct this error. No matter what I do I can not get past the first step in anything recommended on this site which is to connect to a PC. For some reason I can not get the tablet to connect at all, more specifically I can not get the PC to acknowledge it is connected. I am using the micro usb slot on the tablet. I have tried all the acer drivers, 4 operating systems including ubuntu, win xp, win 7 and win 8 and all of this on two different computers to be sure that it wasn't the PC being the problem.
Could someone help me how to figure out what I am doing wrong or what I am not doing right? Or does this tablet error mean that the tablet will never talk to a PC. I have tried APX mode as well as various combinations as per recommendations on this forum with the rocker, power and reset.
Hopefully someone can help me.
Thanks a billion in advance.
So it doesn't look like anyone can help me with this problem but perhaps someone can help me with getting a schematic of the inside of the tablet so I can perhaps fix the micro usb port myself unless someone knows another reason why I can't get it to work. I really need some help, hopefully someone can help me.
Sylgrant said:
So it doesn't look like anyone can help me with this problem but perhaps someone can help me with getting a schematic of the inside of the tablet so I can perhaps fix the micro usb port myself unless someone knows another reason why I can't get it to work. I really need some help, hopefully someone can help me.
Click to expand...
Click to collapse
Strange problem and one I've not heard of before.
First try a different usb cable, they are not created equal these things!
Ensure usb debug. is enabled in Settings.
Connect yr tab to yr pc. Open device manager and check the android usb device driver is installed. If it has you should be good to go.
If it doesn't. ..head to the cpuid guide in my sig. There's a whole section near the end which deals with driver issues and how to set up and test adb etc.
I do have a schematic somewhere, got it
off here so try a search.
Oh, one other thing. ..u didn't mention adb drivers. U can download them from the cpuid guide.
Good luck
dibb
Sent from my GT-I9300 using Tapatalk 2