Hello Guys.
So, I own ASUS K52Jc and I installed Windows 8. Everything running good but my camera (Chicony) works upside down and I can't install driver to flip it.
Any ideas if I can flip it? Or if there will be drivers for ASUS K52 line?
same problem fr me with asus k52jc if i install the correct driver the cam can't work on windows 8 apps like skype ... but it work corretly on desktop apps
Related
Hi all,
I just installed a fresh copy of win7 ultimate on my HTC shift and installed all drivers because the old install was getting sluggish. Everything works except for two things: interpolated high resolution gives a blue screen crash when aero is active (no transparency) and the windows basic theme is UGLY. And the second problem: after I install like 85 windows updates shag control center crashes and have to restore a system recovery point. Do you know what update causes this so i can hide it and install the rest?
Many thanks,
Pelle
pelle.jansen said:
Hi all,
I just installed a fresh copy of win7 ultimate on my HTC shift and installed all drivers because the old install was getting sluggish. Everything works except for two things: interpolated high resolution gives a blue screen crash when aero is active (no transparency) and the windows basic theme is UGLY. And the second problem: after I install like 85 windows updates shag control center crashes and have to restore a system recovery point. Do you know what update causes this so i can hide it and install the rest?
Many thanks,
Pelle
Click to expand...
Click to collapse
Which drivers did you use? I hope you are not using the Windows Vista drivers. Download the Shift Windows 7 drivers from this link http://azsharing.com/yvex8pwmz01j/SHIFT.zip.html. Install the Windows 7 drivers discussed in this thread http://forum.xda-developers.com/showthread.php?t=590009. The sequence of installing them is precise including those that you need to install in Vista Compatibility mode and with Admin Privilleges. As the OP stated some of the drivers will be installed through Windows update but check which ones. Follow the recomendations in that thread and all will work like a charm...
I believe your Shag Control problems and all display problems are related to the drivers and not Windows update. Mine is on automatic updates and I have not excluded any updates at all save for the Language Pack that I do not need....
Re-install the drivers and lets see what happens after that. By the way DO NOT ENABLE AERO BEFORE INSTALLING THE GRAPHICS DRIVERS otherwise you get BSOD....... That advice is shown as Important in the thread mentioned above. Enable aero theme as the last thing you do with all drivers installed to avoid any problems.
I hope you get sorted and enjoy your Shift with Windows 7......
Edit>>>> There is a way to disable Aero when facing your current BSOd situation through Screen Resolution Settings but I dont remember the precise steps. I can retrace the steps on my Shift once I get to it after work and see whether that will help you. But let me know whether re-installing the drivers will have sorted you out>>>>>
Hello,
I used the driver sequence at gadgetmix (sorry, i can't post links yet) because it worked fine a year ago and the drivers from the HTC website in vista compatibility mode and run as administrator.
With reinstalling do you mean that I have to uninstall the old driver and install the new one or can i just install the new driver over the older one?
Thanks
Pelle
EDIT: had aero off the entire installation
pelle.jansen said:
Hello,
I used the driver sequence at gadgetmix (sorry, i can't post links yet) because it worked fine a year ago and the drivers from the HTC website in vista compatibility mode and run as administrator.
With reinstalling do you mean that I have to uninstall the old driver and install the new one or can i just install the new driver over the older one?
Thanks
Pelle
EDIT: had aero off the entire installation
Click to expand...
Click to collapse
Best is to uninstall and then install afresh using Windows 7 drivers..... Perhaps even check box to delete the old driver as well. If Aero was off during installation you dont have many problems. Aero on during 7 upgrade especially before graphics driver update causes Bsod or boot loop.
You should be ok when you install the windows 7 drivers. But the sequence of driver installations is important.... All the best
Have been fiddeling with the drivers for a while now and given up. just started Windows 7 setup again. After that i will use the windows 7! drivers and hope for the best.
Pelle
EDIT: windows just installed. Turning off Aero and starting drivers... Fingers crossed
Drivers just finised and now the sond doesn't work
Tried rolling back/ updating driver, reinstalling driver muting unmuting in windows and shift control center but no luck...
And when I press the resolution changer I have to reboot to switch resolution.
shift control center has to be selected from start menu to start
This is a lot worse than when i did it using the tutorial at gadgetmix
Any idea how to fix this?
pelle.jansen said:
Drivers just finised and now the sond doesn't work
Tried rolling back/ updating driver, reinstalling driver muting unmuting in windows and shift control center but no luck...
And when I press the resolution changer I have to reboot to switch resolution.
shift control center has to be selected from start menu to start
This is a lot worse than when i did it using the tutorial at gadgetmix
Any idea how to fix this?
Click to expand...
Click to collapse
Sorry to hear about the problems you are facing. I am surprised coz I did the Windows 7 installation just a few weeks ago after reviving my dead Shift and everything is working perfectly for me. The only thing I havent fully sorted out is Finger print thing but I know I only need an hour or 2 with it and all will be well.
Incidentally did you do a clean install of 7 or you upgraded Vista?
Since you have just done a fresh install and you dont stand to lose much I would advise that you re-install Vista (F3) which will install all the drivers then Upgrade Windows 7 from the freshly re-installed Vista. You can then install drivers for any device that will show not to be installed after 7 upgrade.... Of course following the sequence and allowing Windows Update to take care of the rest.
PlayStation said:
Sorry to hear about the problems you are facing. I am surprised coz I did the Windows 7 installation just a few weeks ago after reviving my dead Shift and everything is working perfectly for me. The only thing I havent fully sorted out is Finger print thing but I know I only need an hour or 2 with it and all will be well.
Incidentally did you do a clean install of 7 or you upgraded Vista?
Since you have just done a fresh install and you dont stand to lose much I would advise that you re-install Vista (F3) which will install all the drivers then Upgrade Windows 7 from the freshly re-installed Vista. You can then install drivers for any device that will show not to be installed after 7 upgrade.... Of course following the sequence and allowing Windows Update to take care of the rest.
Click to expand...
Click to collapse
The problem is that i once had to replace my HDD because some idiot dropped my shift and for some reason the accelerometer didn't kick in and trashed my hard drive. So pressing F3 won't do anything. Are there any other solutions?
DID IT! It was in my windows 7 install disk. Downloaded and burnt one (it should be legal because I have paid for it) installed, installed drivers an BOOM! everything works! aero, HiRes in aero sound, its nice and responsive battery life on power saver 2H and 45 minutes, havn't tested modem yet as my sim card is in my smartphone but will do that. Thanks a lot for all of your help! I will be hanin round here to help others. I AM SO HAPPY EVERYTHING IS FINE WITH MY LOVELY SHIFT! Updates Sucseeded and everything works perfect!
Only one more question: is it safe to install sp1? Or will that give problems with some of the drivers.
pelle.jansen said:
DID IT! It was in my windows 7 install disk. Downloaded and burnt one (it should be legal because I have paid for it) installed, installed drivers an BOOM! everything works! aero, HiRes in aero sound, its nice and responsive battery life on power saver 2H and 45 minutes, havn't tested modem yet as my sim card is in my smartphone but will do that. Thanks a lot for all of your help! I will be hanin round here to help others. I AM SO HAPPY EVERYTHING IS FINE WITH MY LOVELY SHIFT! Updates Sucseeded and everything works perfect!
Only one more question: is it safe to install sp1? Or will that give problems with some of the drivers.
Click to expand...
Click to collapse
Glad you finally managed to get your Shift up to speed. I always felt that your peculiar issue boiled down to bad install which is confirmed by the first software you used. What type of disk did you use for the Hdd replacement - Hdd or SSd and for what capacity. Been thinking of upgrading but Ssd costs are still up there in teh skies and might not justify upgrading for the ageing Shift....
You can update to Service Pack 1 no problem. I have it and no issues at all.
PlayStation said:
Glad you finally managed to get your Shift up to speed. I always felt that your peculiar issue boiled down to bad install which is confirmed by the first software you used. What type of disk did you use for the Hdd replacement - Hdd or SSd and for what capacity. Been thinking of upgrading but Ssd costs are still up there in teh skies and might not justify upgrading for the ageing Shift....
You can update to Service Pack 1 no problem. I have it and no issues at all.
Click to expand...
Click to collapse
I Bought the exact same drive on ebay for $30 or so. I solved the hard drive light staying on by just running CHKDSK but now the same programs just crash...
It now happens when trying to do a system score, when changing my network to public and when uninstalling a program using control panel. The rest all works fine.
Hi,
i have installed windows 8 and i am loving it but i have the same problem when i installed windows 7, the camera and the microphone aren't working. I have a compaq cq60-214EM. i have been on the hp website for drivers and i clicked on windows 7 32 bit and there's no driver for it but there is a driver for it in the windows vista section.
Can someone help me as i want to use them to call family.
Thanks in advance
use vista drivers
or try 7zip see if you can extract the exe file if yours is one for your 7 driver.
use control panel, device manager, update driver, browse my computer for it...but its down to hardware with the limited drivers available in W8. My R780 all works fine as is
thanks but i went to the device manager and i cant see the camera or the microphone. but i can't find the driver for the computer i have looked everywhere.
also a quick question about windows 8 where is the option for restart or shutdown ?
faddys123 said:
thanks but i went to the device manager and i cant see the camera or the microphone. but i can't find the driver for the computer i have looked everywhere.
also a quick question about windows 8 where is the option for restart or shutdown ?
Click to expand...
Click to collapse
Hover over the start menu and go to settings. Shutdown options are on that menu
Sent from my R800i using Tapatalk
Thanks now need to solve my problem
my microphone driver is Conexant High-Definition SmartAudio 221 Driver
i tried installing it and it said that the device isnt there but it shows up in the device manager so can someone tell me how to install it manually ?
packard bell touch ze8
someone can help me,
my netbook is a packard bell ze8 (butterfly touch)
comes with windows 7 home premium
upgrading to windows 8 pro during installing new windows recognize all drivers
except accelerometer
i installed windows 7 driver in compatibility mode
but the auto-rotation does not work
the video card is an intel gma 4500
any idea?
Have you installed all the OEM's drivers (chipset, video, etc.)? Often the generic drivers don't provide support for features like that. Also, make sure that auto-rotation is enabled; on some systems it isn't.
GoodDayToDie said:
Have you installed all the OEM's drivers (chipset, video, etc.)? Often the generic drivers don't provide support for features like that. Also, make sure that auto-rotation is enabled; on some systems it isn't.
Click to expand...
Click to collapse
thanks for supporting
i had installed the driver provided from packad bell under compatibility mode
then tried with new intel gma4500 driver installed by windows 8
and after also with old driver from packard bell
enabling auto rotation in both by intel setting and control panel settings
...in another partition installing windows 7 auto roation works
maybe there is some registry hack to do...?
tyler200298 said:
thanks for supporting
i had installed the driver provided from packad bell under compatibility mode
then tried with new intel gma4500 driver installed by windows 8
and after also with old driver from packard bell
enabling auto rotation in both by intel setting and control panel settings
...in another partition installing windows 7 auto roation works
maybe there is some registry hack to do...?
Click to expand...
Click to collapse
Solved:
For those who have same problem
You have to refresh pc (new Windows 8 function)
Then install FIRST old windows 7 video drivers
After restart the machine and install the other micro St detection driver for windows 7
Both driver in windows 7 compatibility
Hope this can help someone... I see there is a lot of people have troubles with St accelerometer driver and windows 8
Just purchased Zenfone Max model Z010D and i want to transfer my game/app data using helium but i can't seem to find the adb drivers for it. The universal adb drivers doesn't work. Can anyone help me?
Hi
I also had this problem.
Follow this link: https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view"]https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view
Keep in mind that this will work on win 10. I've tested it on win 7 and during instalation (some blue screen installer) it was written that this is for Samsung device. Running same intaller on win 10 it gave info that this is for android or google something. So, it will work only on win 10.
Hello There !
I'm using a Windows 10 Pro N version 1909 and I'm having a lot of problems with andoid devices since I'm not able to use any of them connected to my laptop. For a Nokia 8 there is an issue with MTP drivers, Xiaomi 8 pro is seen as a device but still issues with drivers, with a nexus 4 on which I installed noughat it doesn't show up at all(which is pretty wierd since I used the same laptop to root it and install the new version of android). Any suggestion to fix the issue?
I need to use them for my app development on android studio, any help would be really helpful.
Thanks for your help
rewat1984 said:
Hello There !
I'm using a Windows 10 Pro N version 1909 and I'm having a lot of problems with andoid devices since I'm not able to use any of them connected to my laptop. For a Nokia 8 there is an issue with MTP drivers, Xiaomi 8 pro is seen as a device but still issues with drivers, with a nexus 4 on which I installed noughat it doesn't show up at all(which is pretty wierd since I used the same laptop to root it and install the new version of android). Any suggestion to fix the issue?
I need to use them for my app development on android studio, any help would be really helpful.
Thanks for your help
Click to expand...
Click to collapse
Go to device manager and if it shows as anything other than your phone, right click and "uninstall device".........then reboot pc and plug phone back in. Usually works if you have already made sure you have the correct drivers installed.
The fix is really simple: just download and install the media feature pack. IT contains all codec and the most important, the MTP driver. You won't find it separately except in this pack.