Database Users

[Q] Latest GPS FIX

Can some one please tell me witch gps fix is the latest one and witch one in your opinion actually works. I see that a popular fix is the Dj05 radio fix and there is even a hardware fix out for the vibriant that bends the gps antenna contact. So witch one should I try first? witch actually works and witch are known not to work?
I searched and came up with a lot of different threads and I think we should consolidate all those threads and list all the fixes and make a poll asking witch fix worked better for the users. This is a very common problem and I am surprised there are no stickies threads been update regularly with the latest info. The biggest problem is that there are MANY threads about it and some are very old, not sure if there are better fixes now.
So please help me list and consolidate all those threads, I will update this post showing all your input. I also have 3 fascinates that all are a little different when it comes to gps and would love to try the fixes and post my results on all three.
Edit: I would also like to write the proper way to test your gps, I see some threads have this buried in between the gps fix steps and I would like to make it more obvious so if you know how to properly test the gps, let me know. I know there are some apps like gps test and status that show you lots of info, would be great to see a list results with a working gps and a faulty one.
thanks.

Dj05 solved my GPS woes.. insta-lock now..
Sent from my SCH-I500 using Tapatalk

When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.

Dalamar1320 said:
When I was running stock, and rooted dI01 I laterally could not acquire a signal. I tried leaving it on, outside in the open, for over an hour, and nothing.
Going to dj05 I can lock within 10 seconds or less.
I am so impressed with the difference.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
I tried following the guide on this link, successfully installed the radio via odin, tried installing the rom and kernel through clockwork but I do not have an option to choose zip file from sd card. the only option i get is to apply sdcard: update.zip. I changed the name of the rom zip file to update.zip and tried to flash it but it told me it failed to verify whole-file signature. What should I do now?
the guide does not explain much so I need some help.

Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App

jiggaman508 said:
Did you flash clockworkmod recovery through odin, then flash clockwork from rom manager? If so you should have an update.zip on your sd card that when applied takes you to clockwork then you can choose which zip to flash from there...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I do not think I flashed clockwork with odin, what I did is installed the dj05 Radio with odin by checking pda and finding the file, then pressing start. after that, the phone rebooted and I installed rom manager. Once in rom manager I installed the latest clockworkmod recovery 2.5.1.0. I do not have an update.zip file there on the root of my sdcard. what did I do wrong? How do I fix it? THanks
in about phone I can see that baseband version is s:i500 V.DJ05

The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App

jiggaman508 said:
The fascinate is different from other phones you need to flash clockwork through odin then in rom manager here is a link on how to flash through odin
http://forum.xda-developers.com/showthread.php?t=788099
Flash that, then delete any update.zips on your sd card, then in rom manager flash clockwork and it will download an update.zip that when applied from stock recovery will take you into clockwork... Once all that is done if you already have the modem installed boot into clockwork and select install zip and find the DJ05 rom you downloaded, flash that and you should be all set...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.

well something went bad, I rebooted and I can see the samsung logo but the there is no splash screen after that only sound. the screen is completely black after that. NOW WHAT??

jonagpa said:
Thank you, I was just about to post that same link here and ask you if this was the correct guide to follow. I just booted into the familiar clockwork and now I am flashing all the good stuff. will update later.
Click to expand...
Click to collapse
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App

jiggaman508 said:
No problem ill check back to make sure all went well
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?

What did you flash?
Sent from my SCH-I500 using XDA App

jonagpa said:
that is really weird, same thing happen but I tried unlocking the phone event though the screen was completely black and it did unlock. Have you heard of this happening?
Click to expand...
Click to collapse
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App

jiggaman508 said:
What did you flash?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.

jonagpa said:
http://forum.xda-developers.com/showthread.php?t=869990&highlight=dj05
go near the bottom of this guide, youll see system/rom and also kernel links. thats what I flashed.
Click to expand...
Click to collapse
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App

jiggaman508 said:
No that's different so it's working now though?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yeah, seems to be working fine, I am afraid to reboot the phone and have it completely die on me. did I flash the correct kernel and rom?

jiggaman508 said:
You flashed both system and kernel? And did you wipe data/cache?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?

jonagpa said:
yes flashed both in order that they are listed.
I did factory reset, I though cache was included in that reset, wrong?
Click to expand...
Click to collapse
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App

jiggaman508 said:
No you should be ok, and if you flashed the rom/kernel from that thread you are good...
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I rebooted and it does the same, no splash screen. I waited a few seconds to make sure it booted all the way and the screen turn on by it self. seems like somehow I messed up the splash screen. I am going to try and go back to stock then try this again. I tested the gps on all 3 of my phones. white one is still doing the best, OG one (stock) is still doing same as before and the new one with dj05 is using more sats that the OG(6/8), but the OG has more sats in view (5/9). Is that weird?

That djo5 kernel from thread does not support boot animations. It's normal for that kernel.
good day.

Can not update Manually

I have tried to update manually but cant. I have downloaded the file from samsung, put on root of card as update.zip and tried to install from clockwork. Is this the wrong way to do it.
I am on all stock and have clockwork installed. I downloaded from the link that has been provided from samsung It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?

If you're using clockwork, you aren't on stock. Last resort is to use the flash utility that Samsung provided. It completely wipes your phone (not your sd card).

nubsors said:
If you're using clockwork, you aren't on stock. Last resort is to use the flash utility that Samsung provided. It completely wipes your phone (not your sd card).
Click to expand...
Click to collapse
Is there a way to remove clockwork besides going back to stock? Also since I do have clockwork installed, will I not get the ota update to work correctly?

I can tell you what I know.
1) The official OTA update does not work with non-stock roms. In your case, your rom became non-stock once you installed CWR.
2) The flash utility provided by samsung will take any epic and clear it of user data and the existing rom and then flashes the 2.2.1 official rom. Your SD card will be untouched, at least mine was.
3) You can always re-root after you've flashed the official release. Do a search in this forum and you can find threads that explain how.
Good luck sir.

Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.

DiGi760 said:
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
Click to expand...
Click to collapse
Any difference between that and the one you can download from samsung or what you would get from OTA?

mynewepic10 said:
Any difference between that and the one you can download from samsung or what you would get from OTA?
Click to expand...
Click to collapse
Need to know too.

DiGi760 said:
Just go get the cwm flashable pre-rooted eb13 rom that dameon87 posted in the dev section. There's also a link to it in the wiki.
Click to expand...
Click to collapse
That one did not work. Do I need to try to get the one that is not signed. I dowloaded the signed one and it did not work. After the install it tried to boot up, but went to the samsung screen and then into the official factory restore mode and tried to reboot and stuck on samsung screen.

Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk

s9ortner said:
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Thanks doing that now.

I had the same problem. Will try odin method when I get home, but I doubt that will work. Didn't work with the developers froyo.
Sent from my SPH-D700 using XDA App

I can't get the manual to work - mine is rooted and rommed, but my husband's is stock.
I have downloaded direct from Samsung 3 times. Once loaded on computer and opened, the Eula doesn't even have the Next button which is needed to proceed.
So strange, guess he will wait for the OTA and drain his battery at an inconvenient time!!

s9ortner said:
Use the unsigned one. The only difference betwen the flashable and the one from samsung is the flashable is deodexed.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I tried both of them and neither one of them worked.

nmoreman said:
I can't get the manual to work - mine is rooted and rommed, but my husband's is stock.
I have downloaded direct from Samsung 3 times. Once loaded on computer and opened, the Eula doesn't even have the Next button which is needed to proceed.
So strange, guess he will wait for the OTA and drain his battery at an inconvenient time!!
Click to expand...
Click to collapse
I'm getting the same problem with the samsung update software. I click yes to accept
And there is nothing that says next, just exit. I am getting errors using odin too. My computer
will see my phone just fine.....until I put it in download mode and try to connect with odin.
I keep trying to repair modem and restart computer to no avail. Its just weird how it all changes for the worse in DL mode. I don't know what to do....
Sent from my epic that is stuck forever on 2.1

funeralplanner said:
I'm getting the same problem with the samsung update software. I click yes to accept
And there is nothing that says next, just exit. I am getting errors using odin too. My computer
will see my phone just fine.....until I put it in download mode and try to connect with odin.
I keep trying to repair modem and restart computer to no avail. Its just weird how it all changes for the worse in DL mode. I don't know what to do....
Sent from my epic that is stuck forever on 2.1
Click to expand...
Click to collapse
If you are using odin try this.
Start odin on your PC first and have it up.
Put phone into download mode
Plug in your phone via usb and see if that helps.
It already sounds like you have the samsung drivers installed, but check to make sure.

mynewepic10 said:
If you are using odin try this.
Start odin on your PC first and have it up.
Put phone into download mode
Plug in your phone via usb and see if that helps.
It already sounds like you have the samsung drivers installed, but check to make sure.
Click to expand...
Click to collapse
Well I gave that a try. No go. I have tried everything I know. Two different computers, both xp. I can't even use the samsung utility because I keep getting the cant connect to usb. When it isn't in download mode i can connect to the computer, both computers just fine. It will tell me what phone I have and all. I just don't get it. Maybe I will just delete driver and install again. Is it a phone problem?

funeralplanner said:
Well I gave that a try. No go. I have tried everything I know. Two different computers, both xp. I can't even use the samsung utility because I keep getting the cant connect to usb. When it isn't in download mode i can connect to the computer, both computers just fine. It will tell me what phone I have and all. I just don't get it. Maybe I will just delete driver and install again. Is it a phone problem?
Click to expand...
Click to collapse
I have used a different version of odin with no issues at all. I have never used this one before.

Help with epic

I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.

bloodywaterfox said:
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
Click to expand...
Click to collapse
Try another USB cable and also make sure it is plugged into the same USB port as before.

I've tried a couple already, any other idea's?

bloodywaterfox said:
I've tried a couple already, any other idea's?
Click to expand...
Click to collapse
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App

If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.

bloodywaterfox said:
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
Click to expand...
Click to collapse
U still didn't answer my question. If Odin doesn't recognize ur phone try installing the drivers again
Sent from my SPH-D700 using XDA Premium App

Esteway.619 said:
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.

bloodywaterfox said:
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
Click to expand...
Click to collapse
Download and flash rfs2ext4 here's the link. http://forum.xda-developers.com/showthread.php?t=1109362
Edit: afther u flash this make sure u reflash the rom and then flash a kernel. Like genocide or twilight
Sent from my SPH-D700 using XDA Premium App

so i just run the zip from clockwork, then what? i'm a bit android illiterate, i really could use and appreciate the help.

This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log

bloodywaterfox said:
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
Click to expand...
Click to collapse
What recovery are u using?? I would say try to really install the drivers on your computer and use Odin to go back to stock and start fresh.
Sent from my SPH-D700 using XDA Premium App

Thanks everyone for the help anyways, I found a .tar file that was a full install for odin and now i have it up and running.
I also figured out what i was originally doing, rooting and installing syndicate.
Thanks guys.

He didn't install a kernel.

CM7 .. Radio change

Hey guys...first post but long time lurker...ran into an issue maybe someone knows the answer to...
I currently have CM7 w/ the latest nightly working flawless. Im still rockin the DJ05 radio and i wanted to upgrade to the ec09. Followed the instructions on how to do it via Odin, phone off 1 button volume down to connect. But when i hit start on odin nothing happens...am i doing something wrong? or am i going about this all wrong and theres another approach after cm7 is installed?

Hm. Did you pull the battery before putting the phone into download mode? Does the device appear in odin? Put the modem file in PDA slot? Tried a different cable or usb port?
Sent from my SCH-I500 using XDA App

yes, NO, yes yes
my computer was wiped clean from last time i used the Odin software, come to find out i need to reinstall my samsung driver...OOPS! Problem solved

slvrmx99 said:
yes, NO, yes yes
my computer was wiped clean from last time i used the Odin software, come to find out i need to reinstall my samsung driver...OOPS! Problem solved
Click to expand...
Click to collapse
Yea lol, a little common sense is usually the solution to most problems. But, you've made it abundantly clear here that common sense apparently isn't too common. Thanks for the example.
Sent from something

There is nothing your missing. My advice to you would be to try a different USB cable. Remove Odin completely and redownload it. Then it should appear. Also make sure you have downloaded the drivers for your device. It may sound stupid or whatever but it's possibly the issue.
Sent from my SCH-I500 using XDA App

Bricked Galaxy S4

This is extremely frustrating.
I successfully rooted my galaxy s4.
I then downloaded CMW and touch, and downloaded this rom: http://forum.xda-developers.com/showthread.php?t=2341376
I then booted into recovery, and wiped etc and then installed the rom. I read on the later part of that page that there wasn't a need for loki so I did not download loki.
I then rebooted, and got the yellow triangle sign saying that the software is not approved by ATT.
This is where I am stuck. I have a mac and am running vmware windows 8.
I tried downloading kies on the mac, and it does not recognize the phone. I did not try kies for windows yet, nor do I know what to do after if I am able to get kies to recognize the s4.
I also downloaded odin, and the firmware, but odin is not recognizing the phone under windows even when I select to use the phone under windows.
I tried the stock usb cable, and a different usb cable, and 2 different usb ports. I do not have a regular windows computer. Is there a way to do this with a mac?
Guess I should have downloaded the loki, is not downloading the loki the whole reason this is happening?
I appreciate everyones help! I just wanted stock android! :good:

I do not have a s4 but have a s2 but its like the same.
1. Why would you not already have Odin installed and kies?! Just in case
2. No backup made?...
3. Can you still get into recovery and download mode if so then you have hope.. wait for someone to give you steps to get out of this
4. If you can't get into either... well :banghead:
Sent from my SPH-D710 using Tapatalk 2

XxlemonxX said:
I do not have a s4 but have a s2 but its like the same.
1. Why would you not already have Odin installed and kies?! Just in case
2. No backup made?...
3. Can you still get into recovery and download mode if so then you have hope.. wait for someone to give you steps to get out of this
4. If you can't get into either... well :banghead:
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Thanks,
1. I have odin and kies installed, they are just not recognizing the phone.
2. I made a backup using titanium backup but not really sure how it works... I've never restored from a backup using titanium
3.Yes I am able to get into download mode by holding the volume, home and power key...

drew1204 said:
Thanks,
1. I have odin and kies installed, they are just not recognizing the phone.
2. I made a backup using titanium backup but not really sure how it works... I've never restored from a backup using titanium
3.Yes I am able to get into download mode by holding the volume, home and power key...
Click to expand...
Click to collapse
Mmm alright... Go into download mode and take out your SD card and download the Loki file in the ROM thread then transfer to sdcard on PC. Then place back in phone.. Then go intro recovery and flash the file and it should work.
But wait before anything can you get into recovery? If so then you go to mounts and storage and mount sdcard and transfer the Loki file from your PC right there.
Sent from my SPH-D710 using Tapatalk 2

I have installed kies on the windows version and it notices the phone is connected, but it just keeps saying "connecting..." and a little thing spinning. Not sure how long it should take to connect...

why not download the loki zip to sd card, then put back on phone, reboot to recovery and install from sd card...

XxlemonxX said:
Mmm alright... Go into download mode and take out your SD card and download the Loki file in the ROM thread then transfer to sdcard on PC. Then place back in phone.. Then go intro recovery and flash the file and it should work.
But wait before anything can you get into recovery? If so then you go to mounts and storage and mount sdcard and transfer the Loki file from your PC right there.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Yes I can boot into recovery.
Wow I didn't even think of that... Sorry I am a noob.
Okay I fixed it (you fixed it thank you so much!) I booted into recovery, and then into the zip file and installed loki, and all is well.
STOCK ANDROID!!! Whew that was scary...

drew1204 said:
Yes I can boot into recovery.
Wow I didn't even think of that... Sorry I am a noob.
Okay I fixed it (you fixed it thank you so much!) I booted into recovery, and then into the zip file and installed loki, and all is well.
STOCK ANDROID!!! Whew that was scary...
Click to expand...
Click to collapse
Welcome
Sent from my SPH-D710 using Tapatalk 2

XxlemonxX said:
Welcome
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Because noobs don't get it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
Because noobs don't get it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Cool

drew1204 said:
Cool
Click to expand...
Click to collapse
You could thank him for helping you. Or is that too hard for you? There's even a thanks button to make it easy
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jd1639 said:
You could thank him for helping you. Or is that too hard for you? There's even a thanks button to make it easy
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Mate don't be so arrogant, he did thank him.
Sent from my GT-I9305 using xda premium

ozgame said:
Mate don't be so arrogant, he did thank him.
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Mate,I don't see that
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

drew1204 said:
Yes I can boot into recovery.
Wow I didn't even think of that... Sorry I am a noob.
Okay I fixed it (you fixed it thank you so much!) I booted into recovery, and then into the zip file and installed loki, and all is well.
STOCK ANDROID!!! Whew that was scary...
Click to expand...
Click to collapse
the OP of that ROM lists these specific installation instructions:
HOW TO INSTALL:
* Download the ROM (NO NEED FOR GAPPS)
* Reboot to Recovery
* Wipe data/factory reset
* Flash the ROM
* U.S. MODELS - Flash Loki Patch - http://tau.shadowchild.nl/files/loki-doki.zip (CANADIAN USERS DO NOT INSTALL)
* Reboot your Galaxy S4
* Enjoy
remember to read everything first and understand what you are doing before proceeding. cheers

And only 5 simple steps. One sec of reading. And it matters. Or kaboom.