A few days ago my Defy just stop working. I've tried with some sbf's. but nothing. Flashing with RDS lite was successful. but when I try to start the phone just appear a "M" white logo. Can't wipe via Vol- + Power bttn.
Please somebody help!!! I'll send thanks from Mèxico forever!!!
What exactly are you flashing, if you have a successful flash without wiping, it should boot loop. After it bootloops pull the battery hold the volume down then press the power button till you get to the android screen with the triangle. I'm sure you know what to do after that.
Sent from my MB525 using XDA
I had the same issue, couldnt get in stock recovery, once you get the triangle with the yellow exclamation, press volume up and down at the same time, that should send you to recovery, from there wipe everything, data cache dalvik, then reboot and it should finally boot, good luck
@Trece20,
if you have a white motorola-logo, i suggest you have flashed an eclair-SBF.
Then you must enter the recovery in this way:
FactoryReset for eclair
Questions go in the Q&A section
help me, i have the same problem!!!
can someone please help me? i have the same problem and i tried everything here. please help me! this was my first phone!!! :crying::crying::crying::crying: i am desperate!!! please!:crying::crying::crying:
AW: [Q] Helllp!!!! Morola defy boot loop can't wipe/hard reset!!!
androidnewbie123 said:
can someone please help me? i have the same problem and i tried everything here. please help me! this was my first phone!!! :crying::crying::crying::crying: i am desperate!!! please!:crying::crying::crying:
Click to expand...
Click to collapse
c'mon give us some more details. which sbf u used. what ROM u want to flash and what have u done at last, and the important thing is don't let ur defy battery run out of power.
androidnewbie123 said:
can someone please help me? i have the same problem and i tried everything here. please help me! this was my first phone!!! :crying::crying::crying::crying: i am desperate!!! please!:crying::crying::crying:
Click to expand...
Click to collapse
You're right, this WAS your phone (sorry, couldn't resist it)
Vicsa said:
You're right, this WAS your phone (sorry, couldn't resist it)
Click to expand...
Click to collapse
Motorola logo
Related
need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......
Flash stock sbf using RSD lite.
Sent from my MB525 using Tapatalk
jassi32 said:
need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......
Click to expand...
Click to collapse
Check if the blue led comes on during boot and press down volume button then check the settings if not you gotta install a another rom I suggest nordic ii with cm7 cant go wrong
Sent from my MB525 using xda premium
Thank you guyszzzzzzzzzzz:d:d:d:d:d:d:d:d
hey guys,my first post here....
i am stuck with the infinite reboot loop from moto logo after i tried the 2ndinit install.my phones just a month old and i can use it now
i can get into the stock recovery menu by pressing -vol while booting,nothing is making any difference there.
if i press the +vol key while booting,it goes into bootloader menu,but it says battery low,cannot program. i had just rooted my phone and was trying to take a nandroid backup when this happened.
please help save my defy :-s
BUMP................
Im not a expert nor its will be t best solution, Recharge your battery on another device.. Next , try first turn on defy with vol press down, when android signal logo appears, its not boot logo..., press up & down at same time, then wipe data.. It will reset your data. Another solution its flash any sbf of your taste with rsd lite. There is a tutorial for defy beginers on stickies & defy wiki , its contain all info you will need
Giuliano
Sent from my MB525 using XDA Premium App
i update to cm 7.1 a month ago and i added my phone number in settings.....
and when flashed the sea15 froyo of my country , the phone number is still there .....any help on how to remove it stock rom or else have flash back cm7.1 to erase it ....
i want help i need to send defy for service repair .....please help .....
and thanks in advance ......
im having the same problem month ago i cant figure it out , after installing 2ndinit and the led turn into blue i reboot my device but it keeps rebooting over and over iv been searching xda fourms for one month now for a solution but all in vain , im stuck with 2.2.2 froyo i can't install CM7 or MS2Ginger , i've heard that i have to install bootmenu or something but im not sure how to !! btw once i click install recovery in 2ndinit it says success but i still can read 2ndinit recovery NOT currently installed and when i try to press uninstall it says there is nothing to do!!
please if some 1 can help me it would be a life saver for me
Closed at OP request
Recovery-->[latest recovery]--> install zip from sdcard--> WajkIUI_multilang_2.1.20.1
then installing~~ at completion..there is a message this defy will restart at MIUI. Anyway after that it gets stuck at motorola startup logo (red color) and does't proceed further.
Anybody can help plz. Em new with defy.
regards~
most likely it's because you didn't do the full wipe before installing the zip file. you now have to reboot back into recovery and do the full wipe and then reinstall the zip file again.
you do know how to get back into recovery, right?
you also could flash a kernel patch the next step.
jh20 said:
most likely it's because you didn't do the full wipe before installing the zip file. you now have to reboot back into recovery and do the full wipe and then reinstall the zip file again.
you do know how to get back into recovery, right?
Click to expand...
Click to collapse
Many thanks~~ can you plz how to get back into recovery?? Im new to defy and dnt know much.
mfkashif said:
Many thanks~~ can you plz how to get back into recovery?? Im new to defy and dnt know much.
Click to expand...
Click to collapse
when you reboot your phone, keep an eye on the top part of your phone where the LED is and have one of your finger on the Volume down button ready. as soon as you see the blue LED comes on, press the Volume down button immediately. this will get you into the custom or latest recovery.
If you don't see the blue LED after a couple of minute, then we might be in trouble. see how you go first.
I did the same. means I did the full wipe and then reinstalled the zip from sdcard. Installation was complete with a message defy will restart with MIUI. But its again stuck on the same startup logo and is not proceeding further.
Is there any other solution??
Actually my fone was working well. I was having some problem like android.acore.process stopped unexpectedtly time and again. Somebody told me to hard reset the fone. I did that by pressing power and vol- button at the same time. And then did hard reset. i.e. wipe data and wipe cache. after that my fone is not rebooting and it always get stuck at startup logo. Then some friend told to reinstall MIUI setup zip file from sdcard. I did the same, many times but problem is still there.
Its sp stressful for me. I shall be grateful if you could give me some solution.
regards~
many thanks~~ can you plz tell how to flash a kernel patch.
regards~
is your phone a defy or defy+? have you flashed any gingerbread full sbf before? what rom was on your phone before?
my fone is defy not fefy+. And rom is WajkiUI. Because this is the file name which i intalled. (WajkIUI_multilang_2.1.20.1 by Shan zip file name which I have). Is this different from MIUI??
and about flashing gingerbread full sbf...I am sorry to say I dnt have idea what is this.
I am very thankful for your kindness as I dnt know many things.
edit: and also in recovery options..there was something written like CynogenDefy Recovery v5.0.3.2. Is this something related to ROM?
Hello everyone...
I have a big problem, after a flashing cm7 (i flashed a rom probably 50 times and more, never had any problems, and i don t know what happened now) i got stucked on a google logo.... i can t go in 2ndinit, custom recvoery. in a stock recovery i did a data and cache format but nothing changes...
some info about my phone. motorola defy mb525, red lense, vip (vodafone) croatia...
pls someone help me, i need a phone, i cant afford another one :crying:
sry for my bad english, thank you in advance!
razorinc said:
Hello everyone...
I have a big problem, after a flashing cm7 (i flashed a rom probably 50 times and more, never had any problems, and i don t know what happened now) i got stucked on a google logo.... i can t go in 2ndinit, custom recvoery. in a stock recovery i did a data and cache format but nothing changes...
some info about my phone. motorola defy mb525, red lense, vip (vodafone) croatia...
pls someone help me, i need a phone, i cant afford another one :crying:
sry for my bad english, thank you in advance!
Click to expand...
Click to collapse
Are you sure you stuck on google logo and not a Motorola "M"?
Have you wiped dalvik as well?
if noting work
try flashing SBF using RDS lite and start from the begining
I face this before
i flashed a new sbf, rooted the phone, put 2nd init, get in custom recovery, flashed cm7, restarted phone, but now after google logo i get triangle with exclamation mark... i didn t face such problem before, any ideas?
razorinc said:
i flashed a new sbf, rooted the phone, put 2nd init, get in custom recovery, flashed cm7, restarted phone, but now after google logo i get triangle with exclamation mark... i didn t face such problem before, any ideas?
Click to expand...
Click to collapse
Hi again. Did you wiped out data, cache and dalvik after flashing cm7? If not then wipe it and reboot.
i managed to solve the problem, now cm7 is working again on my defy, tnx for help... one more question? what is the best kernel for cm7, can someone provide some links?
Try this
razorinc said:
i flashed a new sbf, rooted the phone, put 2nd init, get in custom recovery, flashed cm7, restarted phone, but now after google logo i get triangle with exclamation mark... i didn t face such problem before, any ideas?
Click to expand...
Click to collapse
The exclamation mark that you see is your stock recovery....when you see that exclamation mark with an android bot in it...press both the Vol Up + Vol Down buttons at once...
This will get you into the stock recovery and you will see certain options in blue text....there hit the factory data reset and wipe the cache and then try rebooting your phone normally....
I had the same problem and following the steps i mentioned above resolved the issue...
Do let me know if it worked !!
Thanks
Shrewdy said:
The exclamation mark that you see is your stock recovery....when you see that exclamation mark with an android bot in it...press both the Vol Up + Vol Down buttons at once...
This will get you into the stock recovery and you will see certain options in blue text....there hit the factory data reset and wipe the cache and then try rebooting your phone normally....
I had the same problem and following the steps i mentioned above resolved the issue...
Do let me know if it worked !!
Thanks
Click to expand...
Click to collapse
In my post above I wrote that i solve the problem, but thanks for your advice and help....
About a month ago I installed a clockwork based recovery app from the market. I tried restoring and this failed leaving the phone unbootable.
Since then I have tried flashing MANY other sbf`s using rsd lite but this has made the situation worse. I think that I even flashed one for the defy+
Now all I get is either a blank screen or a M logo when I switch on.
Pressing power & volume down doesn`t work so I can`t access the stock recovery menu
I can access the bootloader using power & volume up so i can flash more sbf`s but I`ve tried most of them but none will boot.
BTW the phone was running cm7.1 before I had all this trouble and the battery has been fully charged (in another defy)
Is there any way I can clear off all the stuff I`ve been installing and start from fresh? or can anyone tell me how to get the phone to boot?
I have searched for a solution in the forums but most of the replies involve clearing the cache which I cant do as I cant get to the recovery menu.
Any helpful comments will be gratefully received
many thanks
Jeff H
Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.
intemptesta said:
Your flashs complete with Finish/Pass, or just "please manually power up this phone"?
If it's the later, read this http://forum.xda-developers.com/showpost.php?p=38187413&postcount=2
Just stick to the most highest Defy+ sbf build, or just use DFP-231 build to be sure.
Click to expand...
Click to collapse
Thanks for the reply
I flashed the DFP-231 sbf file as you suggested but it wouldn`t boot any further than the M logo.
I did get the "please manually power up this phone" message and followed the procedure from the link you gave
I can`t wipe the as I cannot get to the recovery menu.
Is there any other way to wipe the cache?
JeffH
Nah, no other way than stock recovery for stock rom.
Just make sure your flash finished with Finish/pass, that'll make your stock recovery working again.
Wish you a best luck.
i flashed with this:
DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
but still no boot
Is this the correct rom?
cheers
JeffH
I wonder if the following might give someone a clue about whats wrong with my defy
If I flash gingerbread rom either defy or defy+ then rsd completes with PASS, and phone will boot as far as the M logo and I can access the menu with power+volume UP
If I flash below gingerbread then rsd doesnt complete but gives `manually reboot` message. If I then power off and plug in again then rsd completes with PASS but when I reboot there is NO M logo and no menu on power and volume up.
I`m keeping my fingers crossed that I will be able to revive my phone.
JeffH
With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.
intemptesta said:
With DFP-231 rom, how about power+volume down to boot into stock recovery? I think you're just one step away from reviving defy.
Click to expand...
Click to collapse
No, Power + volume down doesn`t work, (ie nothing happens). Only power + volume up works.
Try this http://forum.xda-developers.com/showthread.php?t=1595013
Vicsa said:
Try this http://forum.xda-developers.com/showthread.php?t=1595013
Click to expand...
Click to collapse
Thanks, but it didn`t work. Still stuck at M logo. Obviously I couldn`t clear the cache before and between flashing
JeffH
Thank you all for your helpful advice.
I have now sent the phone away for repair.
I spoke to the technician on the phone and she reckons it needs dismantling and a jtag repair (whatever that is).
But beware an app on the market, I think it is called orange backup, as it was after installing this and trying to restore the backup that I screwed up my phone!
JeffH
Hi, Iam just a member who wishes to share the solutions to problems related to Softbricks, Hardbricks, Bootloops & IMEI which I personally experienced and got the solutions here on XDA Forums. I will try to elaborate everything in detail as possible and will mention only the steps I took to recovering My Yu Yureka. Please read and follow word to word exactly & you should have your Yureka running in less than an hour.
For Softbricks & Hardbricks please refer to this thread : http://forum.xda-developers.com/yureka/orig-development/tool-brick-yureka-device-using-t3442862
To recover IMEI, please refer to this thread : http://forum.xda-developers.com/yureka/help/recovering-lost-imei-yu-yureka-yunique-t3331485
Please understand the procedures. Main thing, remain calm, everything is going to be all right with the right commands.
Things you need before following all procedures can be downloaded on the threads mentioned above.
I hope & believe all of you can revive your Yu Yureka back to life with this. I did. So can you.
Please don't forget to hit Thanks to me and the people from the above threads if this helps you. And also try to spread the good word to fellow members suffering from similar problems.
Thanks & Good Luck.
Can you help me?!!
Hey bro, it's Nikhil from punjab. I'm facing a new problem. My yureka stucked in bootloop and continuously restarting but not starting. I'm very much concerned about my data, as i don't have any backup! Can you help me in this problem? If you know any helpful solution then please guide me! Your help will be appreciated. (My phone is not rooted)
Nik8910 said:
Hey bro, it's Nikhil from punjab. I'm facing a new problem. My yureka stucked in bootloop and continuously restarting but not starting. I'm very much concerned about my data, as i don't have any backup! Can you help me in this problem? If you know any helpful solution then please guide me! Your help will be appreciated. (My phone is not rooted)
Click to expand...
Click to collapse
Hi Nikhil,
Can you try to get into recovery mode? You need to understand a few commands of ADB also. Don't worry. Your phone will be working again. Remove the battery for a few seconds and put it back. Don't start the phone. First hold the volume up button and then at the same time hold the volume down button. Keep pressed both the buttons and then press the ON button ( All three buttons at the same time ). After your device vibrates a little and sows the YU Logo, let go of all the buttons......you should get into the bootloader menu. Tell me if you can do that. Will explain the steps further after you reply.
Yes I can enter into the recovery mode, but when I try to enter into the bootloader it shows fastboot mode for a sec and then all black screen. I want to tell you that my phone is not rooted and neither i unlocked the bootloader nor installed twrp or cmw!! But still it is bricked without any reason. Is there any solution to recover my data??
Nik8910 said:
Yes I can enter into the recovery mode, but when I try to enter into the bootloader it shows fastboot mode for a sec and then all black screen. I want to tell you that my phone is not rooted and neither i unlocked the bootloader nor installed twrp or cmw!! But still it is bricked without any reason. Is there any solution to recover my data??
Click to expand...
Click to collapse
Hi,
Are you able to get your data back from the bricked Yureka phone.???
My yureka also suddenly not booting, stuck at logo. need to get my contacts from phone memory.
Is there any way to get back??
glaber said:
Hi,
Are you able to get your data back from the bricked Yureka phone.???
My yureka also suddenly not booting, stuck at logo. need to get my contacts from phone memory.
Is there any way to get back??
Click to expand...
Click to collapse
Hey there, not yet buddy im still on the track. I'm searching and waiting for a suitable solution by which I can get my whole backup, but didn't get any yet. :/ Still hoping for the best! It's a horrible situation for me from the last 3 days. Don't know what to do! Someone please help!
Problem solveed
Nik8910 said:
Hey there, not yet buddy im still on the track. I'm searching and waiting for a suitable solution by which I can get my whole backup, but didn't get any yet. :/ Still hoping for the best! It's a horrible situation for me from the last 3 days. Don't know what to do! Someone please help!
Click to expand...
Click to collapse
Hi,
I am able to get my phone back.
I just downloaded the file from http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed.zip and copied to memory card.
Insert the memory card my phone and then booted into recovery mode.
From recovery mode, select Install/Update zip from sdcard. Andriod got updated.
after update, reboot the phone. It took almost 10mins to boot.
After reboot, I had all my data.
Hope you ll get ur data back.
Thanks
Yureka
my yureka when power on reboots means the YU logo pos and closes then again pops and closes...and when I power on my phone when charger is connected the phone starts perfectly everything works and when I unplug the charger it again powers offs..need a solution please help
Same problem after flashing stock ROM also not able to fix boot loop what to do now
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
Same problem after flashing stock ROM also not able to fix boot loop what to do now if I connect my mobile to charger then it boots and open the home after some time again it boot loops plz help
Chandu710 said:
my yureka when power on reboots means the YU logo pos and closes then again pops and closes...and when I power on my phone when charger is connected the phone starts perfectly everything works and when I unplug the charger it again powers offs..need a solution please help
Click to expand...
Click to collapse
i am also facing same problem please help me guys
is the problem solved , am facing the similar problem. i have flashed CRdroid rom and it worked fine for two days, my phone switched off suddenly when i was using it and from then it restarts at yu logo when charger is unplugged, when the charger in plugged in it runs for a minute and restarts.. any suggestion is appreciated..!!
i am facing issue with my yureka plus,
not going in fastboot mode. only blank screen is comming with download faild images.
plz give solution
how to go in fastboot????:crying:
Sir,
After going on the link,
I followed every instructions perfectly,
My device was soft bricked,
I ran the Complete unbrick tomoto bat file,
also i connected my phone in fastboot mode,
then suddenly,
the process stopped and as far as I think my device got Hard bricked,
the device can't even get into fastboot mode,
just red light LED on connecting the usb
please help sir..
I BEG OF YOU SIR,
PLEASE.
venkateshchandra said:
is the problem solved , am facing the similar problem. i have flashed CRdroid rom and it worked fine for two days, my phone switched off suddenly when i was using it and from then it restarts at yu logo when charger is unplugged, when the charger in plugged in it runs for a minute and restarts.. any suggestion is appreciated..!!
Click to expand...
Click to collapse
Hello..watching my switched off yureka for over 3 days now. Tried flashing cwm recovery finding nothing else to do. Till that time I hadn't tried switching the phone on while plugged in. Don't know if the cwm recovery thing worked or not, but from then on I am unable to reach the recovery (vol up+vol down+power).
But then suddenly in the plugged in state my phone comes alive and boots completely!!!:cyclops::victory:. And then I get to know that while charging, the gandu phone is completing its boot process. But after a few minutes its blacking out and starting its on and off routine again. (minutes varying from 1 to 45 , not sure depending on what, because now I am running hotspot and LTE on the phone to write this on the laptop..and yet it is awake for more than 45 minutes now got a vibe that if the screen is turned off the phone will not shut down. ) ... guys please help. how to make it work without the usb pushed at its back...?
Edited a day later: went to the service centre.. They simply said the battery needs to be replaced. Yes it is all good now. Relieved.
Cant go out of the Bootloop
I don't know what happened,my phone was working really fine.I was using CM 13.0 Snapshot Rom. But then when I reset my phone by going into Setting>Backup & Reset my phone got switched off for rebooting but then it didn't start...its continuously rebooting after the YU logo..I cant even go to the recovery..I had twrp....I tried to install the recovery again using fastboot but it didnt work...even flashed the Stock CM 12.0 firware via fastboot but nothing happened...please help...
Back from Ashes !!!
antim098 said:
I don't know what happened,my phone was working really fine.I was using CM 13.0 Snapshot Rom. But then when I reset my phone by going into Setting>Backup & Reset my phone got switched off for rebooting but then it didn't start...its continuously rebooting after the YU logo..I cant even go to the recovery..I had twrp....I tried to install the recovery again using fastboot but it didnt work...even flashed the Stock CM 12.0 firware via fastboot but nothing happened...please help...
Click to expand...
Click to collapse
Hey Buddy , Same here I am also using RR N, and suddenly one fine morning it went into bootloop. I am stuck at YU logo. Can you confirm that it stucks at userdata erasing and formating data/factory as well ?
I did a lot of research and I think i found out solution. Now my phone is reseting once it starts I will confirm.:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
kalagikr said:
Hey Buddy , Same here I am also using RR N, and suddenly one fine morning it went into bootloop. I am stuck at YU logo. Can you confirm that it stucks at userdata erasing and formating data/factory as well ?
I did a lot of research and I think i found out solution. Now my phone is reseting once it starts I will confirm.:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
yes it did stuck once or twice at the userdata erasing stage when I was putting up the new ROM but after some attempts,it never got stuck at any stage but even after successful installation, the problem existed...Now I have given my phone for repair and the store person said that there is some power issue in the board...its not an software isssue.
Chandu710 said:
my yureka when power on reboots means the YU logo pos and closes then again pops and closes...and when I power on my phone when charger is connected the phone starts perfectly everything works and when I unplug the charger it again powers offs..need a solution please help
Click to expand...
Click to collapse
Facing same problem ...any help guys...
Can you please update the further steps to do
Can you try to get into recovery mode? You need to understand a few commands of ADB also. Don't worry. Your phone will be working again. Remove the battery for a few seconds and put it back. Don't start the phone. First hold the volume up button and then at the same time hold the volume down button. Keep pressed both the buttons and then press the ON button ( All three buttons at the same time ). After your device vibrates a little and sows the YU Logo, let go of all the buttons......you should get into the bootloader menu. Tell me if you can do that. Will explain the steps further after you reply.[/QUOTE]
Yureka mobile is getting heated and gets switch off...and doesn't get ON. Screen shows Cyanogen all day...but its getting ON in safe mode...plz help to sort it out...