Hi. I crashed my wizard´s display. LCD works, but touchpad is broken. I want to reboot the device and controll it via remote-sw from pc. Does anyone know, how to skip the lcd-configure-process after hard-reset. This is the point where I can´t continue because of the non-working touchpad... Thanks for your help ! Buy the way: Did anyone changed touchpad succesfull ? Has to be brazed !?
hackl77 said:
Hi. I crashed my wizard´s display. LCD works, but touchpad is broken. I want to reboot the device and controll it via remote-sw from pc. Does anyone know, how to skip the lcd-configure-process after hard-reset. This is the point where I can´t continue because of the non-working touchpad... Thanks for your help ! Buy the way: Did anyone changed touchpad succesfull ? Has to be brazed !?
Click to expand...
Click to collapse
Try mymobiler http://www.mymobiler.com/ I am not sure if it will install before while asking to set up the touch pad but it is worth a try. I figured this maybe good because it does not ask to be installed on the device.
Thank you dwertz for your help. I tried, but "mymobiler" can only by installed after finishing the setup process on ppc. mhhh....
hackl77 said:
Thank you dwertz for your help. I tried, but "mymobiler" can only by installed after finishing the setup process on ppc. mhhh....
Click to expand...
Click to collapse
Try this.
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
connect the device using active sync then use windws explorer and explorer the device ,go into the windows folder on your device and delete the welcome.ink file, then soft reset and it wont bug you again till you hard reset.
you should also check this link out as you can use software to align the screen remotely
http://forum.xda-developers.com/showthread.php?t=347539&highlight=bypassing+screen+alignment
i had the same problem with my wizard. i got around pretty much everything, the only thing i can think of that i never figured out how to work with the keyboard is the alarm clocks. other than that with the arrow keys and tab button you should be set.
as far as getting it fixed, i found a replacement touch matrix and replaced it myself. i do not reccommend this as it caused a TON of headaches and still doesn't work right to this day. if i were you try getting a lcd/touch screen combo on ebay, its not too bad to open it and replace it.
Hi friends, can any one provide me the perfect calibration data for diamond, whose touch screen was working perfectly,
for some information
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"=" ---- "
diyasuki said:
Hi friends, can any one provide me the perfect calibration data for diamond, whose touch screen was working perfectly,
for some information
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"=" ---- "
Click to expand...
Click to collapse
Not sure what you mean, but please, try the following
490,498 789,175 795,821 190,815 185,174
i hve doudt, is the data changes for every phone, because my data after aligning screen was
"562,506 833,190 838,833 305,831 296,184"
and i found some other data in net
"626,506 851,188 855,832 378,827 374,182 "
Exciting, isn't it.
did you try one of these data's already, what happened to your own calibration program?
Guys need help. Anyone out there who have the calibration data file for our Htc Touch(Elfin) ? I need the calibration file so that I can use it on Remote Screen Alignment by code factory. My Touchscreen doest not work so I need the file to see if the problem is only the alignment or my digitizer. Thanks.. Just Post the download link here if you have the calibration file for Htc Touch(elfin)
......
anyone????
Never heard of this app.
Just my 2 cents.
jeremy89632 said:
Never heard of this app.
Just my 2 cents.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=355010
rainier17 said:
http://forum.xda-developers.com/showthread.php?t=355010
Click to expand...
Click to collapse
My Bad! Sorry!
Hi,
I have found tips over the forums on how to improve the screen sensitivity of your WinMo resistive touchscreen
1) When calibrating your screen, tap the cursor hairs as accurately and as lightly as possible. I use a toothpick for this, it has a fine tip. You will notice immediately how much more responsive your screen is!
2) Another method I found was:
a) Install Attached .cab / Reg Tweak
b) Soft Reset
c) Be Amazed at your Screen Sensitivity!
This is a little .cab file / reg tweak created by kevinpwhite (all credits to him)
EDIT: Many people in the thread have said that it has calibrated their screen wrong and they can't navigate it (cab/reg) This has resulted in a hard reset to get the touchscreen back(due to different touchscreen resolutions etc) I will investigate more into this and create a new version, if possible. Please use it at your own risk, and be sure to create a backup of your device.
Originally by Reix2x
Hi, dudes, my HTC WIZARD gets "untouchable" after this installation, but i found the way to solve it! =D
1- Download: CeRegEdit (u can found it on Google, with this u can explore your mobile reg trough your PC)
2- Open it (with your cell phone connected in ActiveSync)
3- Go to Tools, and select "Unlock registry" (your registry will be "Editable")
4- Navigate to:[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] and change this values to your defaults:
"CalibrationData" and "MaxCalError" (you have to found the values for your phone, here in XDA i foud the values for my phone)
5- Softreset
I hope to help someone, and i hope than no one had to make an horrible hardreset
Click to expand...
Click to collapse
Click to expand...
Click to collapse
This was created specifically for the TG01, but i think that the WinMo stored values are the same across all devices. It simply changes a reg key to increase the screen pressure to the max.
Please give me feedback if it works for you!
Please hit the THANKS BUTTON if you like this!
well, this just ****ed over my omnia, and i can't access it from my computer as i dont have a connect cable. any tips on how to bring it back to normal without hard reset?
insomnia+ said:
well, this just ****ed over my omnia, and i can't access it from my computer as i dont have a connect cable. any tips on how to bring it back to normal without hard reset?
Click to expand...
Click to collapse
please read the xda rules... no bad language.
This cannot possibly cause ANY damage. i have tested it on various winmo devices (touch hd etc) if so, explain?
Also describe your problem better. how is that gooing to help me, by just saying it ________ my Omnia!
olyloh6696 said:
please read the xda rules... no bad language.
This cannot possibly cause ANY damage. i have tested it on various winmo devices (touch hd etc) if so, explain?
Also describe your problem better. how is that gooing to help me, by just saying it ________ my Omnia!
Click to expand...
Click to collapse
any feedback from anybody? Quite a few downloads butno response to whether it actually works!
olyloh6696 said:
any feedback from anybody? Quite a few downloads butno response to whether it actually works!
Click to expand...
Click to collapse
i've tested in my O2 LIFE WM6, at the first time i got trouble, i couldnt tap my screen well. when i tapped all screen, it connected to bottom right screen.
i used my navigation button to reach the SETTING-SYSTEM-SCREEN-ALIGN SCREEN.
the align screen works. then i used a srynge to calibrate it (dont try this at home), the final result is........
WORKS GREAT LIKE A CHARM!!
my screen becomes more sensitive! I dont need my stylus anymore, with resco keybord typing is so much fun.
THANK YOU..
reykaivory said:
i've tested in my O2 LIFE WM6, at the first time i got trouble, i couldnt tap my screen well. when i tapped all screen, it connected to bottom right screen.
i used my navigation button to reach the SETTING-SYSTEM-SCREEN-ALIGN SCREEN.
the align screen works. then i used a srynge to calibrate it (dont try this at home), the final result is........
WORKS GREAT LIKE A CHARM!!
my screen becomes more sensitive! I dont need my stylus anymore, with resco keybord typing is so much fun.
THANK YOU..
Click to expand...
Click to collapse
Glad it works mate!
I cannot get what is the deal?
babak_1274 said:
I cannot get what is the deal?
Click to expand...
Click to collapse
this sets your screen sensitivity to the maximum allowed pressure point. So your resisitive touch screen will require a light touch to register changes.
This is what loads of people complain about? Poor screen sensitivity? So try this out!!
I didn't feel any difference in my Rhodium...
Daved+ said:
I didn't feel any difference in my Rhodium...
Click to expand...
Click to collapse
which method did you use?
babak_1274 said:
I cannot get what is the deal?
Click to expand...
Click to collapse
I've installed on my diamond 2 and I have been the same as the other: to do a reset, I have completely lost the calibration of the screen. Through "My mobile" I could recalibrate it, but do not notice any difference ...
diesiocho said:
I've installed on my diamond 2 and I have been the same as the other: to do a reset, I have completely lost the calibration of the screen. Through "My mobile" I could recalibrate it, but do not notice any difference ...
Click to expand...
Click to collapse
Thanks for trying amyway! It certainly works for me though. It just recalibrates the reg entries for screen sensitivity. It wont male a huge difference!
Sent from my iPod touch using Tapatalk
No one else to try?
Just used the Calibration method on my Rhodium400, seems to work, but maybe it's just my head!
coder12 said:
Just used the Calibration method on my Rhodium400, seems to work, but maybe it's just my head!
Click to expand...
Click to collapse
thabks for the feedbakc! glad it works!
I always thought that this couldn't really be done. Tried many before and didn't see a difference. Then again I can't help myself so I will try this out too.
why didn't you come up with this earlier? i wasted two years using my htc jade with this insensitivity, finally a solution
thank you so much
Okay, I will try it now, but we need to know if there are a way to uninstall it safely in case if anything wrong happen like that one who had the Omnia, also you should type if we have to recalibrate the screen points after installing the tweak on all devices or what.
Thanks in advance.
tried it on my hTC Gene (P3400) running 6.5.5 and i got the same problem mentioned in post #5...dead unresponsive screen with a few taps being wrongly located towards the bottom right of the screen...so had to go into the screen setting via my D-pad and re-align the screen to enable it again
i think problem has something to do with the screen resolution (mine is qvga)
faced similar issues when trying a screen sensitivity improvement hack meant for wvga screens i found somewhere within the forums...
anyways nice job...its great to see some people still trying to make an effort to keep WinMo going!! keep up the good work!!
she7ata said:
Okay, I will try it now, but we need to know if there are a way to uninstall it safely in case if anything wrong happen like that one who had the Omnia, also you should type if we have to recalibrate the screen points after installing the tweak on all devices or what.
Thanks in advance.
Click to expand...
Click to collapse
first try method one of calibrating your screen on your own
if you try method two of installing the cab thenall you have to do is run the cab file and soft-reset your device
if its worked, and we hope it does, then that should be it, you should have a screen which is more responsive
if you get a frozen screen just navigate to settings/system/screen and align your screen again to get it to work using the direction keys if you have them or by any other means
or hard reset to undo the settings
i'm just sharing whatever info i have...do tell me if i've left anything out
i need help i have a bug in the lower part of the screen it's works fine but in some application and screens it doesn't work how do i fix it?
somebody plz help me
danch92 said:
i need help i have a bug in the lower part of the screen it's works fine but in some application and screens it doesn't work how do i fix it?
Click to expand...
Click to collapse
Maybe it's a software issue. You should try an other ROM. If the bug exists there, you will have to replace your screen.
ToMpI97 said:
Maybe it's a software issue. You should try an other ROM. If the bug exists there, you will have to replace your screen.
Click to expand...
Click to collapse
how can it be a broken screen if it's happens only in applications?
Than do a factory reset. It should solve your problem.
If it's only at some app, can be that ROM is not good or app is not compatibile. Many app's have black "line" at bottom of screen because they use 800px high resolution but i'm sure that you already know that.