Related
I know that there are conflicting reports as to what plays and what doesn't through the HDMI port.
I finally bought a cable. I plugged it in to my phone and the TV. The tv automatically switched to "480p" and goes black (like it is about to do something). But it stays black. For anything.
Also, someone told me that there should be a little "HDMI" icon in the stop left of the phone when it is plugged in. I don't have this on my phone. Nothing happens on my phone at all.
I have 3 HDMI inputs on my tv. It's a viewsonic, if that matters.
Can somebody please help me diagnose this problem?? This is one of the reasons that I bought the phone.
Thanks for any help.
Have you tried the YouTube and Gallery apps? Those are supposed to be the only apps that work.
Only having YouTube and the gallery work with hdmi is another reason to be pissed off about the dos cap. HTC really thought watching YouTube clips were so important that they needed to limit the screen for it?
Sent from my PC36100 using XDA App
Dumb question, but just so i'm clear. I have a ripped version of a movie on my phone.. i "should" be able to play that via the HDMI cable using the video gallery app right?
jrun said:
Dumb question, but just so i'm clear. I have a ripped version of a movie on my phone.. i "should" be able to play that via the HDMI cable using the video gallery app right?
Click to expand...
Click to collapse
Apparently not.
I have a HDMI cable and a sony bravia and I get 720p and 480p perfectly fine. I encoded some of my blurays to 720p with handbrake and they play perfectly and amaze everyone I show it to. Some things to take note of the video player cant access any movies over 2gb so I just split them since some movies like Avatar can take up 2.5gb alone at 1280x720p using x.264 codec at 60% constant quality and 128 AAC for the audio.
P_Dub_S said:
I have a HDMI cable and a sony bravia and I get 720p and 480p perfectly fine. I encoded some of my blurays to 720p with handbrake and they play perfectly and amaze everyone I show it to. Some things to take note of the video player cant access any movies over 2gb so I just split them since some movies like Avatar can take up 2.5gb alone at 1280x720p using x.264 codec at 60% constant quality and 128 AAC for the audio.
Click to expand...
Click to collapse
Only slightly off topic, so I will post here. Care to share your handbrake settings for encoding, in further depth than what you posted above? I have read every darn post/thread on the forums and even on internet for handbrake encoding that will work for movies on the EVO, but I fail everytime. I'm thinking it might be decrypting issue, but can't validate that. I get audio, and pixelated video that looks like it might be the copy protection messing with me. I have a 64 bit Windows 7 machine, and have the DVD43 plugin in the background for decryption, but still can't figure it out. Ideas? Point me in the right direction? Sorry if this is too off topic...It relates to the way I want to try and use my HDMI cable...
Sure i use AnyDVD HD for my background decoding and I always rip the movie first to my harddrive using ClownBD http://www.clownbd.com/ that way I have a single M2TS file to work with and it really seem to be faster for me this way as I also keep the uncompressed versions for my home computer system.
Handbrake settings are as follows
Container: mp4
Picture settings: width 1280
Notes: your gonna have to play with aspect ratio settings sometimes because of cropping and ratio settings the video will sometimes want to drop below 1280 to keep aspect ratio what you have to do is set anamorphic to custom then modulus to 16 and set the display width to 1280 you really have to play with the settings and do tests encodes of 3 minutes or so to find the right settings I have only had to do this with one movie so this will not always be the case often your encode will be straight set width to 1280 and check keep aspect ratio and set anamorphic to none.
No Filters
Video: X.264 codec, same as source FPS, constant quality 60.78% RF:20
note: some people have used 2 pass encoding and 1500 bitrate I haven't tried this yet since this is the old way of encoding video files using the x.264 codec but the developer on Handbrakes website had some suggestions himself that the codec is actually better off using a 1pass quality setting so that's what I have been doing since he released the newest version.
Audio: select your source track AAC codec and Dolby Pro Logic II Mixdown sample rate auto and bitrate 128 or 160 doesn't matter just don't go over 160
No Subtitles or chapters or advanced stuff needed from here start encoding and it works. Once your movie is done if it's larger than 2gb than youll need to either split it using another piece of software or try lower quality settings on your encode.
P_Dub_S said:
Sure i use AnyDVD HD for my background decoding and I always rip the movie first to my harddrive using ClownBD http://www.clownbd.com/ that way I have a single M2TS file to work with and it really seem to be faster for me this way as I also keep the uncompressed versions for my home computer system.
Handbrake settings are as follows ................
Container: .
Click to expand...
Click to collapse
Thanks P. I'll give that all a shot. I suspect it's an encrypting issue that I'm experiencing, so I'll start by trying AnyDVD, and proceed to try the other steps from there.
Bang3r said:
Thanks P. I'll give that all a shot. I suspect it's an encrypting issue that I'm experiencing, so I'll start by trying AnyDVD, and proceed to try the other steps from there.
Click to expand...
Click to collapse
No problem let me know how it goes if you need any other help send me a PM
Excellent encoding tips, P_Dub_S, you should make a thread on this subject.
Just want to add something that I found out while making 720 rips of some BD movies, the Android player supports only AVC baseline profiles. This could explain why some people are having problems making playable videos. So for those using Handbrake (or any other MP4 compressor), make sure you don't use B-Frames or CABAC entropy coding. If this sounds confusing, just select the iPhone preset in Handbrake first, then make the changes P_Dub mentioned.
I also noticed the output range of the HDMI port is full range (0-255) rather than the more common limited range (16-235) that most consumer HDTVs still default to. So if the video looks overly contrasty (black crush), you might want to check on the HDMI level setting of the TV. If the HDMI driver ever gets re-written, it would be nice to have the output levels selectable on the phone.
HDMI used to work and not anymore
HDMI used to work on my EVO but for whatever the reason is I can get it to work anymore. Does anybody having the same issue and/or having a solution?
How about some details?
What ROM are you using?
What software do you have running?
Have you tried other TVs, other devices on that TV's HDMI connection?
My problem was a task killer, as soon as I rebooted the phone without running a task killer, HDMI out worked.
I am using Rom version 3.26.651.6. It used to work on my Samsung tv and no longer working. I even tried on a Panasonic tv and a gateway monitor with hdmi and no luck. I tried both YouTube and video record directly from the phone. I called Sprint and they are anxious to send me a replacement so not sure if it's a known issue with the EVO. I have the same issue on both phones. I will try Phancy suggestion tonight.
Some kernels break hdmi as well, should check the thread for your rom/kernel your using for issues, what works, what doesn't,etc... if your root.
Sent from my phone.
Came across this tutorial for preset to convert your HD videos for the Atrix.
http://www.knowyourcell.com/motorol...d_transfer_them_to_the_motorola_atrix_4g.html
So does anyone think this is weird that dual core has to go through converting software while my galaxy tab and nexus s can run all my ha qualities from jetvd and tubemate without a hitch ....will there be updates that will help with video playback
Sent from my MB860 using XDA App
^same outcry from xoom users
So far I'm not that impressed with the video playback of the Atrix, but I suppose we'll have to wait and see what the 1080p update brings with it.
Attached is a Handbrake preset that I've tweaked for the Atrix. I tried various settings and these are it.
I keep getting an error
I tried your settings and messing with a bunch of them. I can watch in in VLC on the pc, but no matter what player I use on the atrix I get "file cannot be displayed or played"...any thoughts?
Strange. I encoded a DVD movie, BBC Top Gear episodes (from XVID) and a couple of other stuff, all worked perfectly for me.
Under the advanced tab, try setting the reference frames to 0 and slide the Psychovisual Rate Distro slider all the way to the left.
Have you try Vital Player? It seems to play almost or a lot of stuff Im throwing it.
Curious, have any of you got a good rip from Ripbot 264? I have a couple of Blu Rays I've converted via MakeMKV, but then I need to run them through something else. These are in a VC1 format and Handbrake doesn't recognize them. Ripbot264 does but I can't get a good file out of it. Any help with the presets? I got a good one the first time, but it cropped out a lot... (my fault on the settings I think) and the 2nd try I set it to make an mkv, another oops as the atrix won't read it.
scottrleo1 said:
I tried your settings and messing with a bunch of them. I can watch in in VLC on the pc, but no matter what player I use on the atrix I get "file cannot be displayed or played"...any thoughts?
Click to expand...
Click to collapse
Did you change the container to mkv, because the Atrix seems to hate mkv.
Bit of a bump but anyone had luck with this?
I tried above instructions, also made sure I started off with the 'normal' profile not high profile, still nothing plays. Is this the whole 'tegra2 can't play hi profile x264' thing, if so how do I get handbrake to output baseline?
CoriolisSTORM said:
....I have a couple of Blu Rays I've converted via MakeMKV, but then I need to run them through something else.
Click to expand...
Click to collapse
After Blu Ray conversion via MakeMKV I've been running the files through the 'Badaboom 2' transcoder (using the AppleTV preset).
I did have to switch to 'MoboPlayer' because the 'Act 1' video player I was using would not play the AppeTV files.
thanks very much
After much experimentation I figured out the key is to encode in x264 baseline NOT normal or hi profile.
Basically use the same presets as iphone 3gs in terms of x264 parameters (not resolution etc.) and it will play.
A bit pathetic really since it can push jaw dropping 3D games but not video encoded with a spec that's pretty much mainstream. I'm not even talking about 1080p. Just be nice to be able to drop a typical 720p x264 rip in and play. DIsappointed
Under Honeycomb 3.1, playback of some high profile h264 files is now possible. This means it is now possible to convert many high profile MKV files to a format the XOOM will play WITHOUT the time consuming process of re-encoding the video. So for those who hate re-encoding, here is how:
Download and install the freeware app XenonMKV. It will allow one click conversion of a high profile 720p MKV file to an mp4 that the XOOM can play WITHOUT the time consuming process of re-encoding the video. Also it leaves original video quality intact and untouched. Special credit to parrotheadmjb for pointing us to this app.
Advantages of this method:
1. Converts only audio with no loss of video quality - video is untouched only audio and container are changed. No artifacts or distortion added by a video re-encode.
2. Much faster then re-encoding the whole video in something like Handbrake or DVD cat. 40 min TV show converts in about 5-6 min. Two hour movie in 15 to 17 minutes or faster depending on your system.
Disadvantages:
1. Will not work for main and high profile 1080p MKV - use DVDcat or Handbrake for these
2. One click version can be quriky with some videos. Manual tools may work better on these.
Some tips for XenonMKV
Setting aspect ratio manually may be necessary for some videos. Do this if your converted video appears stretched or aspect doesn't match original. I have found that using 16x10 rather than 16x9 works for XOOM even when original is 16x9. Setting 16x9 sometimes gave wrong aspect even when original was 16x9.
There is an option to manually select the audio track for multi-language MKV. Use this if its giving you the wrong audio track.
Alternate method using separate tools is shown below. Usefull for stuff that doesn't convert with Xenon. Harder to setup - not that hard really. Just got to download a lot of pieces and put them in the proper folders. After that you just make shorcuts to the desktops for the 3 tools and you are ready.
Very easy to convert videos once tools with Graphical user interfaces are installed -Just requires three separate manual steps.
1. Demux your video: This can be done using MKVtoolnix + MKVextract GUI
Once this tool is installed, you just load your video and click extract.
You should have a video file with h264 extension and an ac3 audio file.
2. Convert just the ac3 audio file to AAC. This can be done with eac3, but I have a paid copy of Ojosoft Audio converter, and I have been using that to convert the
AC3 audio file to an AAC audio file
With Ojo you just load the AC3 file extracted in step 1, select AAC and go.
3. Using MP4boxGUI, mux the original Video file back together with the new AAC audio file and you are done.
Again super easy. Just load the original video extracted in step one and the new AAC audio file made in step 2 and click mux. That's it.
I have specified GUI versions of all the tools for simplicity, however if you love the command line, have fun.
The whole process takes less about 10 minutes, and produces an MP4 video file with audio that plays back on the XOOM.
Disclaimer: I have just started experimenting with this process. Don't blame me if a particular video doesn't convert. Don't go buing Ojosoft and blaming me if you can't use it for your video. There are free ac3 to AAC converters out there.
Important note: You may need to manually set the fps in MP4boxGUI, don't trust the program to keep the original fps. If you don't know the fps of the original, try 23.976 or download mediainfo. If you don't set it manually, and leave it at default you may get audio sync issues.
Edit: So far have only tested with 720p high profile MKV's but its working very well - finally feel like I can watch videos on my XOOM the way they were intended. Going to convert a large number now and see how many work without problems.
Edit: Can't believe how well this is working. Finally an easy way to convert MKV for XOOM without re-encoding for hours. Even worked on a 720p [email protected] file. Perfect video and audio. Damn! I might stop considering the galaxy tab 10.1.
Nice to hear about this kind of progress and testing =)
now all we need is encoder software that'll copy original video but encode the audio with a simple click... batch processing and maybe copy to device in one go.
doesn't handbrake have a "keep video" setting? =)
looking forward to more tests.
i'm still hoping that when coreplayer for android gets released all our playback woes will be over...
@corecodec: "Subtitles completed for CorePlayer on Android and Windows."
Fred
Sent from my HTC Desire using XDA App
I was thinking that too. Would be nice to do it all with one click. But I haven't gotten that far ahead just yet. Now just trying all sorts of videos to see how many work.
But its still not hard once the tools are set up with GUI interfaces. If you just want to download a video and watch it right away without waiting to re-encode the whole thing it's great. I just put the links to the three tools on my desktop and go throught the steps and you can be up watching a movie or TV show in about 10 min after its downloaded.
Theres already a bunch of 1-click tools that will remux it for you.
XenonMKV works great, theres a number of other tools that were made for the xbox 360 that do this since the 360 will play mp4 but not mkv. Try out xenonmkv and see how well that works on the xoom, I haven't tried yet.. I did think about it a few months ago but never got around to it.
edit: also, if you want it to, it'll split the file for you if its >4gb since the file system kinda limits us to 4gb files
Not really a conversion tool but I use Plex (app and server on my PC) and I can stream anything over 3g and WiFi without having to do all this conversion mess. The app costs $5 but its well worth it, there was literally zero setup and my Xoom found my plex server instantly and I was streaming video/music anywhere I was. Obviously for 720 and 1080p videos 3g likely wouldnt be the best but I stream Blu-Ray rips (1080p) over WiFi and it looks and sounds great. I no longer have to convert anything (even plays .mkv's)
parrotheadmjb said:
Theres already a bunch of 1-click tools that will remux it for you.
XenonMKV works great, theres a number of other tools that were made for the xbox 360 that do this since the 360 will play mp4 but not mkv. Try out xenonmkv and see how well that works on the xoom, I haven't tried yet.. I did think about it a few months ago but never got around to it.
edit: also, if you want it to, it'll split the file for you if its >4gb since the file system kinda limits us to 4gb files
Click to expand...
Click to collapse
Awesome. I was looking for something just like this with no luck, but I downloaded this and tried it with a 720p scene release I had been meaning to watch with great results! Video plays great on the xoom, and it was larger than 4GB (4.1), so I'm unsure about that limit. Thanks, I recommend this for sure!
parrotheadmjb said:
Theres already a bunch of 1-click tools that will remux it for you.
XenonMKV works great, theres a number of other tools that were made for the xbox 360 that do this since the 360 will play mp4 but not mkv. Try out xenonmkv and see how well that works on the xoom, I haven't tried yet.. I did think about it a few months ago but never got around to it.
edit: also, if you want it to, it'll split the file for you if its >4gb since the file system kinda limits us to 4gb files
Click to expand...
Click to collapse
Great suggestion - I'm trying XenonMKV right now. Its basically an automated 1click way of performing the steps I outlined above and it seems to be working very well. It looks like we finally have a way of converting and playing MKV files on the XOOM fast and easy without waiting hours to re-encode!! Wow this really changes my opinion of the XOOM.
Tried Xenonmkv out on a 1.2 GB 720p high profile h264 mkv file with ac3 audio. It was able to change the container to mp4 keeping the video quality the same and reencoding the ac3 to aac and remuxing all in less than 5 minutes.
thor17 said:
Tried Xenonmkv out on a 1.2 GB 720p high profile h264 mkv file with ac3 audio. It was able to change the container to mp4 keeping the video quality the same and reencoding the ac3 to aac and remuxing all in less than 5 minutes.
Click to expand...
Click to collapse
What settings are you using? I am trying it now and it has been running for 40 minutes. Forgive my ignorance with this video stuff. It seems to be taking just as long as using DVD Catalyst or Handbrake.
keitht said:
What settings are you using? I am trying it now and it has been running for 40 minutes. Forgive my ignorance with this video stuff. It seems to be taking just as long as using DVD Catalyst or Handbrake.
Click to expand...
Click to collapse
Somethings definitely wrong there. Try re-installing - downloading required libraries Nero- visual basic runtimes etc - also watch all the messages it displays as the MKV is being processed and observe what step it gets stuck on - that should give you a clue as to which tool or library is missing. Of course, its also possible you fed it a video it can't handle, for example I wonder whether it can process a file with DTS audio - something like that might make it hang or give an error message.
Digital Man said:
Somethings definitely wrong there. Try re-installing - downloading required libraries Nero- visual basic runtimes etc - also watch all the messages it displays as the MKV is being processed and observe what step it gets stuck on - that should give you a clue as to which tool or library is missing. Of course, its also possible you fed it a video it can't handle, for example I wonder whether it can process a file with DTS audio - something like that might make it hang or give an error message.
Click to expand...
Click to collapse
I tried a different video file and it worked much faster, 17 minutes. The one that took a long time did say "Detected video or audio codec: A_DTS". Not seeing any error though. If most are around 17 minutes, that is good enough for me.
keitht said:
I tried a different video file and it worked much faster, 17 minutes. The one that took a long time did say "Detected video or audio codec: A_DTS". Not seeing any error though. If most are around 17 minutes, that is good enough for me.
Click to expand...
Click to collapse
That seems about right - a 40 minute 720p MKV takes about 5 or 6 minutes on my computer.
A two hour 720p video takes about 15 minutes. It still takes time to re-encode that much audio, but still far less than something like DVD catalyst or Handbrake. And on a faster computer, I would imagine it would take hardly any time at all.
I assume from your results that the DTS file worked eventually, just took a long time. I was able to convert a two hour DTS file using the manual tools I listed above in conjunction with OjoSoft Audio converter and it took more than 20 minutes, so I gues DTS takes a bit longer than AC3.
Dvdcatalyst 4 seems to be working the best for me. Only 9 buks right now.
Sent from my Xoom using XDA Premium App
nubsors said:
Dvdcatalyst 4 seems to be working the best for me. Only 9 buks right now.
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
DVDcatalyst is an excellent program. And until now, was one of the best solutions for converting MKV videos for the XOOM. Only problem is, with DVDcatalyst and Handbrake and similar programs you are re-encoding your entire video - and in the case of DVDcatalyst, to a lower profile, with a potentional loss of quality. Using DVDcatalyst, I have noticed macroblocking and distortion on its fast, and HQ1 settings. And its HQ2 setting takes a very long time.
By re-encoding only the audio, with something like XenonMKV you are leaving the video un-touched with zero loss or change in quality.
Put more simply, DVDcatalyst and Handbrake are doing a tremendous ammount of unnecessary work to convert a video. Work which is no longer necessary under HC 3.1, because it is capable of handling many high profile 720p h264 files now natively, without conversion.
After viewing this posts, i think this is a good idea. but i still don't know how to operate. i usually use Fox Real Xoom video converter to convert mkv to mp4 for playing. i know it is sample, but i don't know if the way Digital Man provides is also simple?
Unless there is a freeware one click solution for this, there is no point for me, I can handbrake Tron bluray in under 20 minutes. Ripping from the disc takes about 10 more.
Sent from my HTC Desire using Tapatalk
oh...your post seems really amazing, but i had took money to buy a xoom video converter. maybe i should watch your post earlier.
alias_neo said:
Unless there is a freeware one click solution for this, there is no point for me, I can handbrake Tron bluray in under 20 minutes. Ripping from the disc takes about 10 more.
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Xenonmkv is a freeware one click solution.
thor17 said:
Xenonmkv is a freeware one click solution.
Click to expand...
Click to collapse
Ummm what he said.
I think thats the whole point. We now have a one click solution that doesn't require re-encoding. (have to read the whole thread people - its really not that long!) I am not using my original steps anymore either. I am using the batch/folder convert in XenonMKV.
I think I will edit the first post in this thread and add XenonMKV as a better solution. Special thanks to parrotheadmjb for sugesting a one click solution in XenonMKV!
Good work, i kinda gave up on movies on my xoom as dvdcat took so long. Does this support 1080p rips? Is the file size cut down alot?
Sent from my ADR6400L using XDA Premium App
hi,
I want to know whats the best way (format & quality, an app) to watch some movies on the nook. It no need to be in best quality but it should work.
;-) just for my wife to kill time before getting the baby in the hospital ....
do you have any suggestion?
thanks for your help!
My wife uses netflix, works great. What is the status of your nook? Stock or rooted?
Sent from my ADR6425LVW using Tapatalk
If you're running CM7...
I just did a lot of this for my wife who was convalescing...To covert to a format I can watch on the NC, I use AVS Tools video converter, but any converter will work fine for media you have rights to; there is an M4v* conversion preset for the iphone (720p) which works great on nook color (I run CM7 & use standard movie player). NO tweaks really needed, but I set the frame rate to 29.97 to match the source. Smaller video sizes don't seem to make much difference in file size. With CM7 the google videos you can dnload work great on Nook Color.
For loading, I suggest transferring via your SD card, wireless transfers of movies takes forever.
* Nice format as I can then load same files on my wife's ipad. Yeah she gets the cadillac tablet, I get the tweakers tab...
If running CM7 -
I suggest mobo player with the moboplayer codec for armv7vfp3 (two separate apps on Google Market). I've had extremely smooth playback with software decoded files that I was too lazy to convert to a supported format.
If encoding for Nook Color in general (CM7 or stock):
MP4 container, H.264 baseline profile, up to 854x480 resolution. Technically the screen is 1024 x 600 but NCs have a hardware limitation for decoding higher than 854x480, YMMV with that.
I use DVD Catalyst 4 (paid software, was $10? I think) which has several Nook Color presets (and updated recently for Nook Tablet) as well as other tablets and phones, such as the Xoom. Just easier to click the preset, adjust for subtitles/alternative voice track if needed, then set a whole batch of videos to recode.
I've used free applications like Handbrake, for which you can get a preset profile for the Nook Color. I just like the ease of DVDC4 for converting both digital and hard media.
on cm7
moboplayer decodes and smoothly plays back every movie I've ever "obtained" from the internet
no need to convert anything
The vlc beta works really well. I like mobo too, just had some syncing issues with a few of my xvid avis.
Sent from my ADR6300 using Tapatalk
Thanks for all the feedback. I have some DVDs she would like to see (means converting?) . I use the NC with CM7 (1 month old NL version) from SD.
So what's the best way?
Thanks!
Sent from my HD2 using XDA Premium App
Handbrake is definitely the best for DVD conversion. It has easy to use presets. I'be had good luck with iPod touch preset. Reasonable file size and decent video quality.
Sent from my NookColor using Tapatalk
I use Rock player to play my avi's
http://www.appbrain.com/app/rockplayer-lite/com.redirectin.rockplayer.android.unified.lite
Zirus69 said:
Thanks for all the feedback. I have some DVDs she would like to see (means converting?) . I use the NC with CM7 (1 month old NL version) from SD.
So what's the best way?
Thanks!
Sent from my HD2 using XDA Premium App
Click to expand...
Click to collapse
FREE: Handbrake with some preset profile, there were a few here. For a basic, no-frills, very customizable encoder, it's very good. And it's free.
PAID: IMO, DVD Catalyst 4. $10. I'm in no way affiliated with the company, just have been a very happy customer with the ease of use/results. With minimal tinkering I've gotten better results for some tricky conversions (e.g., multiple episodes, multiple sound tracks/subtitling options, widescreen) than with Handbrake. For me it's worth the money not to have to spend time tinkering with test encodes, tweaking settings, etc. so I can just batch jobs up and do other things.
YMMV, of course.
spr8dogg said:
Handbrake is definitely the best for DVD conversion. It has easy to use presets. I'be had good luck with iPod touch preset. Reasonable file size and decent video quality.
Click to expand...
Click to collapse
Handsdown the WORST dvdripping software (experience) on the market, I have no idea why everyone reccomends it. I use Magic DVD Ripper. Simple easy to use interface, with advanced options if needed.
streaming videos from share to Nook Color
I "stream" all my videos to my Nook Color via 802.11g using CifsManager and VitalPlayer software decoding. Occasionally the video I'm watching will be hardware decoded by VitalPlayer if the codec is correct. And occasionally, if watching a big .mkv file I get a little chatter with only 54Mb 802.11g, but that's very rare.
It beats the hell out of copying video files to /mnt/emmc or /mnt/sdcard over wireless.
1) grab VitalPlayer from the Market (free version is OK, the ads only show up when the controls are visible)
2) grab CifsManager from the Market.
3) Configure your share on any old computer/NAS and put video files in it. Know these things: the workgroup, the share perms (username/password) and leave the NTFS perms at Everyone Full Control.
4) on your Nook Color, use Terminal to create folder /mnt/cifs
5) fire up CifsManager and connect to your share point, mounting it to /mnt/cifs, remembering to specify the path, workgroup, username and password. When the dot in CifsManager is green, you're mounted.
6) using File Explorer, or Root Explorer on your Nook Color (any Android file manager will do) browse to /mnt/cifs/[share name] and browse your video files. Select the video to play.
7) Select VitalPlayer if asked, and set to default if desired.
8) Wait a few seconds for VitalPlayer to start your video. Usually it will display "Software Decoding" before it starts playing.
I've never met a codec that VitalPlayer didn't like.
OR you could just download ES File Explorer and Rock Player from the market, and browse your Windows Media Server(s) on your network, playing files through Rock Player (which supports almost any file type for wireless streaming).
I use Mobo for the NC.
However, I do have a strange problem. On my Xoom, I can reach my NAS using ES File Explorer and it will stream to the Xoom.
If I use the NC to the exact same file, it will try to download the file and play it locally. I'm assuming that it will also only work for files that are re-encoded for the NC format and if its not, it will just simply chock on playback.
How does an app like Netflix do it? Do they have various encoded versions or is there some transition layer within the Netflix APK?
al mon said:
I use Mobo for the NC.
However, I do have a strange problem. On my Xoom, I can reach my NAS using ES File Explorer and it will stream to the Xoom.
If I use the NC to the exact same file, it will try to download the file and play it locally. I'm assuming that it will also only work for files that are re-encoded for the NC format and if its not, it will just simply chock on playback.
How does an app like Netflix do it? Do they have various encoded versions or is there some transition layer within the Netflix APK?
Click to expand...
Click to collapse
Not sure - I have used ES File to access movies, and they stream. If it's the wrong file format though ES File will open a browser window. So make sure it's a m4v of the right dimensions etc & it should stream.
The player is what supports the streaming Not the file explorer. Rock Player is the only one I've used that worked for streaming. ES media player would try and cache the file locally first.
Sent from my NookColor using XDA Premium App
unsivil_audio said:
The player is what supports the streaming Not the file explorer. Rock Player is the only one I've used that worked for streaming. ES media player would try and cache the file locally first.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
OK, makes sense...I was using Mobo when streaming.
viewing really wide screen movie
For those born before 1970, there's a great movie called How the West Was Won (HWWW). The aspect ratio is wider that 16:9. When I play on NC, the aspect ratio is wrong. Yet viewing the m4k file with VLC on my PC, the aspect ratio is correct.
TV shows and other movies display correctly on NC.
Why does the native movie player or the ES Explorer view change the aspect ratio. Any suggestions?
Hello,
I've tried to search but didn't find an answer.
I'm looking for a way to stream 1080p videos from my PC to android device (Nexus 10 in my case), both on the same wifi lan using N-type router.
I have set a user and password on the PC windows 7, and I can connect to it with my tablet (ES/solid explorer) through the wifi, and stream videos. The problem is this connection type is not fast enough for streaming 1080p videos, so the videos on my tablet lag, shutter, etc.
Any ideas how to solve it? Can I setup a different type of connection/protocol, which will be fast enough for streaming 1080p vidoes?
Any help is appreciated!
Try Plex media server. The android app is $4 (I think) and the PC software is free. The beauty of it is that you can connect to your server from anywhere. I've watched episodes of modern family from the comfort of the bathroom at work without any issues. For high quality video you're going to need to be on Wi-Fi, but you can get great quality video through plex.
Sent from my Galaxy Nexus using Tapatalk 4
Thank you.
Meanwhile I have found another solution:
- Installing XMBC on my pc and enabling uPNP on it.
- Installing MediaHouse app on my tablet.
uPNP is much faster than the normal Windows SMB, so I can now stream high quality videos without any issue over my wifi.
The only problem is uPNP doesn't support streaming srt subtitles file along with the mkv movie. So I have to copy the srt it locally to the Tablet or embed it to the MKV.
My favorite streaming tool is Emit. www.emitapp.com
They have an Android client, iOS client, and web streamer, and it's a decent-quality transcoder. Totally free.
I have no problems transcribing on an i5-750 that is also a Hyper-V host for 3 VMs, and is running torrents 24/7. It's a dedicated box with a gig connection though, so I have tons of throughput. No problems streaming over LTE on my S4 or over my home connection (50MB comcast)
phishfi said:
Try Plex media server. The android app is $4 (I think) and the PC software is free. The beauty of it is that you can connect to your server from anywhere. I've watched episodes of modern family from the comfort of the bathroom at work without any issues. For high quality video you're going to need to be on Wi-Fi, but you can get great quality video through plex.
Sent from my Galaxy Nexus using Tapatalk 4
Click to expand...
Click to collapse
thanks for this man..
TTT. Figured I'd rez this rather than starting a redundant thread.
I gave Plex a shot; I downloaded the Windows App, installed, opened it, but once I tried to navigate to the "Channel Directory" I got this prompt:
Plex Media Server
Waiting on Response...
It never connected to the PMS. I tried some Googles to figure out the problem, but couldn't find anything relevant. So screw Plex.
For now, what I've done is create a Homegroup, and I use ES File Explorer to navigate the Homegroup in the LAN tab. However, there are two things I don't like about this:
The speed is limited. I guess this is an SMB problem. Separately, as a test, I've connected an i5 laptop to this homegroup, and it won't play a 16GB mkv I have of The Avengers over the Homegroup. It's handled any video files I've thrown at it under 5GB, but past that, it appears that the data bandwidth becomes an issue because the video stutters. This couldn't be a shortcoming of the laptop because it could play the files from its native hard drive without issue. Thus, the problem must be the rate of data transferred wireless over the router. So I'm attracted to the uPNP servers.
On Android, it only works for yet smaller files. I'm only able to watch videos that MX Player can handle using SW decoding. This has limited me to low bitrate 480p video. My goal is to be able to watch all my videos and movies on my Xoom or my Droid X. Unfortunately, the Tegra 2 and the ARM V8 processors in these devices aren't very powerful, and the mkv's/mp4's I have aren't specifically encoded for their chipsets. Also, most of my movies are 1080p, and the Xoom is only 1280x800, and the Droid X is 854x480, so there is the additional workload of downscaling. One solution is that I can convert any video I have using a program called "DVD Catalyst", but the conversion rate is ~125% on a minute-per-minute basis, so this is very time consuming. I'd rather that I was able to use my PC's CPU/GPU to decode the video in real time as I watch the video, and stream this over the Homegroup to my phone/tablet. In other words, in principle, I want to use the PC's hardware to do the heavy lifting while the Android device displays the product of that work.
What's the best way to do this? The OP mentioned he uses XMBC and MediaHouse. Is this optimal, or is there a better method for my goal?
Of course SMB is slow, I wrote it on the first post - this was my main problem. It's ok for 720p but not for 1080p.
You can use XMBC and MediaHouse - it will work but will not stream the .srt subtitles. There are other free uPnP options I've found that work with external subtitles, if you're interested.
Anyway, if you have resolution scaling issues that your android device cannot handle on the fly, I suggest you to re-encode the video offline on your PC.
Animor said:
Of course SMB is slow, I wrote it on the first post - this was my main problem. It's ok for 720p but not for 1080p.
Click to expand...
Click to collapse
I suppose I didn't make it clear, but it's because of what you wrote that I was presuming that SMB was my issue. Still, I can play most 1080p content over the WLAN to the laptop; just not the 1080p content with a really high bitrate.
You can use XMBC and MediaHouse - it will work but will not stream the .srt subtitles. There are other free uPnP options I've found that work with external subtitles, if you're interested.
Click to expand...
Click to collapse
Have you found desktop server software and an Android app that you prefer to these? Please elaborate if you have.
Anyway, if you have resolution scaling issues that your android device cannot handle on the fly, I suggest you to re-encode the video offline on your PC.
Click to expand...
Click to collapse
In part #2 of my post I described why I already use this as an option, but I would prefer not having to do this. This gets to the heart of what I'm trying to learn. Is it possible to play the desktop files on the tablet/phone without offline conversion? I can conceptualize two theoretical ways, but I have no idea- assuming they are even possible- if there is software that would enable me to do this:
(1) Streaming conversion.
Without creating a new, converted file from the source 1080p video, I'm wondering if there is a program that will convert the desktop 1080p video in real time while streaming that over the network to the Android device. Perhaps it wasn't clear, but my PC is powerful enough that most video converts in the DVD Catalyst software at a minimum 1.25x rate (meaning that 5 minutes of video will convert in about 4 minutes). Thus, a real-time conversion stream seems possible since it would take less time to convert a movie than it would take to watch it. This kills the waiting period and also storage issues. Using offline conversion, I have to decide what I want to watch, convert it, then play the converted file (which takes up additional space on my hard drive). If I could convert-in-stream, then I could simply pick whatever video I wanted to watch, and play it without having to wait for it to convert, and I wouldn't have to worry about extra space being used.
(2) Display mirroring.
The PC plays the video as it would on itself in VLC, and somehow mirrors this image (like with NFC) over the network. No conversion; only downscaling, and this shouldn't be a problem because my PC can easily downscale 1080p to 720p on VLC without stutter. Ergo, in this scenario, the Android device becomes basically a computer monitor that is receiving the data stream over a network rather than from an HDMI/DVI/VGA cable. This seems like the simpler option. Anyone know if it's possible?
Hi,
As for your question, I have found a way to stream external srt subtitles along with the movie, using free uPnP.
Apparently, only some uPnP media servers and clients support it. In addition, only some movie players can extract this information when streamed through uPnP. I've found several such uPnP media servers, but most of them require payment after a trial period. However, I've managed to find one that doesn't
So, in order to stream videos with external srt, you need the following:
1. Serviio on you PC.
2. BubbleUPnP on your android device.
3. MX player on your android device.
4. The srt file should have the same name of the movie file, and they have to reside both at the same directory in your PC.
If you want to check your system under heavy or moderate bit rate, you can use this:
http://www.auby.no/files/video_tests/
"birds" is quite heavy. If you get it to work, you won't have any problem with 1080p movies.
Perhaps the term "1080p" movies is not accurate. What really matter is the bitrate. Naturally, 1080p movies requite higher bitrate. So even if you manage to play small-size 1080p movies through smb, I guess that as you wrote yourself, it's because of the lower bitrate.
If you want to make sure where is your bottleneck, copy the movie to your android device and run it locally. you can use "birds" or any other movie you want. If the movie stutter when run locally, then your bottleneck is your android hw. However, don't use SW decoder, use hw decoder. On MX player I use HW+, and on BS player I use the "experimental hw decoding" feature. On my Nexus 10, this is the only way I can handle high bitrate movies.
Regarding what you asked about: I'm sorry, but I am not familiar with a proper way to mirror a high quality video from the PC to the android device. You can try screen sharing/mirror softwares like VNC or TeamViewer, but I don't think they will work with adequate fps for displaying a video.
You're the man, Animor. This is exactly what I needed, and although Servio doesn't "mirror", it does do #1. The word I was searching for there was "transcoding", and their software does just that because I am able to stream all of these 1080p videos flawlessly on my tablet using the Servio + BubbleUPnP (which has a gorgeous UI, btw), and I know for a fact that MX Player-- even with ARMv7 codec support and running H/W+-- couldn't play these files without stutter even when I'd copied them to its local SD. So it's definitely using my PC's processing power.
This is just so amazingly *****ing. I feel like Doc Oc in Spider-Man 2:
"The power of my PC...in the palm of my hand."
I'm glad I could help you
Please note that transcoding on Serviio doesn't run on Generic DLNA profile. So if you are using the generic profile, that's not the explanation for your device able to play the vidoes.
Animor said:
I'm glad I could help you
Please note that transcoding on Serviio doesn't run on Generic DLNA profile. So if you are using the generic profile, that's not the explanation for your device able to play the vidoes.
Click to expand...
Click to collapse
Indeed. I spoke too soon forgetting that my "Android Optimized" folder with the movies I'd converted specifically for the Tegra 2 chipset was a subfolder of my greater folder. I tested four movies, and by sheer serendipity, they were all from that subfolder. So I tested the unconverted movies, and, yeah, same problem. MX can't play them using HW/HW+; it's forced to use SW decoding for playback, and it's just too much for the Tegra 2 to handle.
How do I enable a profile that will allow the transcoding that I'm after?
You can choose a profile on one of the tabs on serviio settings. I think it was library.
However I'm not sure you'll find a suitable profile for your device.
Sent from my Nexus 10 using Tapatalk 4
I have used many applications for streaming. 1080p is dream.I even bought a new wifi router for stream. Now i have 1Gbit lan an 300Mbit wifi speed at home.The best result was obtained using Bsplayer and EsExplorer on android and standart network folder in Win7(Ubuntu - better) .
Max play 720p in hw decoding mode.
I suggest to those facing various issues to try out the app ''Emit''. For me, on the same wireless network, it functions well, playing external subtitles just fine.
OK so I've been going down this road on an Android tablet & this seems to work well.
1) BubbleUPNP - connects to my Samsung's AllShare server for my TV on mypc wired into the network.
2) KMPlayer - backwards compatible & it just works with all my files when selecting in bubbleUPNP.
The other way to approach this is IMO using FX File Explorer Pro (local p2p site for unlocked apk) & this enables network support? Again, the media player was what really gave me issues, KWPlayer worked best for me.
Animor said:
Hi,
As for your question, I have found a way to stream external srt subtitles along with the movie, using free uPnP.
Apparently, only some uPnP media servers and clients support it. In addition, only some movie players can extract this information when streamed through uPnP. I've found several such uPnP media servers, but most of them require payment after a trial period. However, I've managed to find one that doesn't
So, in order to stream videos with external srt, you need the following:
1. Serviio on you PC.
2. BubbleUPnP on your android device.
3. MX player on your android device.
4. The srt file should have the same name of the movie file, and they have to reside both at the same directory in your PC.
If you want to check your system under heavy or moderate bit rate, you can use this:
http://www.auby.no/files/video_tests/
"birds" is quite heavy. If you get it to work, you won't have any problem with 1080p movies.
Perhaps the term "1080p" movies is not accurate. What really matter is the bitrate. Naturally, 1080p movies requite higher bitrate. So even if you manage to play small-size 1080p movies through smb, I guess that as you wrote yourself, it's because of the lower bitrate.
If you want to make sure where is your bottleneck, copy the movie to your android device and run it locally. you can use "birds" or any other movie you want. If the movie stutter when run locally, then your bottleneck is your android hw. However, don't use SW decoder, use hw decoder. On MX player I use HW+, and on BS player I use the "experimental hw decoding" feature. On my Nexus 10, this is the only way I can handle high bitrate movies.
Regarding what you asked about: I'm sorry, but I am not familiar with a proper way to mirror a high quality video from the PC to the android device. You can try screen sharing/mirror softwares like VNC or TeamViewer, but I don't think they will work with adequate fps for displaying a video.
Click to expand...
Click to collapse
thanks, works now for me!
MarkusOSx said:
thanks, works now for me!
Click to expand...
Click to collapse
I like folder music player.
I know I'm resurrecting a long dead thread but I figured everyone here is/was interested in about the same thing, so you may already have found a solution.
Basically it had already been asked earlier as one of two options, but was passed over for the other. Did anyone ever get mirroring the video to work? There's lot of mirror apps out there but I'm looking for a way that will let me play a video on my PC and mirror it directly as is on my phone, while still having full control over the video on my PC. This also let's me further control DTS tracks which gets decoded by my AV receiver instead of my phone, therefore audio isn't an issue, I just need video. Any ideas?