Database Users

Flashing new recovery isnt working.

Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks

mobilemidget said:
Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks
Click to expand...
Click to collapse
Did u delete the name on the recoveryname.img upon flashing??
Sent from my HTC Vision using XDA App

Download Root Explorer and navigate to /system/bin
Make sure /system is mounted in r/w then take this attached file, unzip it, and place it inside of /system/bin
Go back into terminal and try that command again.

ok so I installed root manager, and put the flash_image.zip in the system/bit, and tried it again with the terminal emulator, but i still have no results, it says after the pause when you plress enter after the flash_image prompt, your supposed to reboot the phone and it should start with the new recovery, but when i open ROM manager it staill shows V 2.5.... If i did somthing wrong i cant figure it out., Please help.
Thanks

http://www.youtube.com/watch?v=w4QViSam2og&feature=youtube_gdata_player
Follow these instructions. You can't go wrong. Make sure you back out of the app and go back in. It sets the cursor to the correct posistion. All you have to do is put the .img in the root of your sd. Hope this helps, it did for me.
Sent from my HTC Vision using XDA App

wait, so why aren't you just flashing the recovery through ROM manager? Are you trying to install CWR 3.0+?

yes I am trying to flash cwm 3.0, and it is not an option with ROM manager. I will try the Youtube instructions. Thanks

Ok so I tried the instructions with the Youtube video, and when i do the cmd promt in Terminal i get this;
Cant open device: "/dev/block/mmcblk0"
error in reading mbr!
failed with error: -1
I have the recovery.img file (not zip) on the sd card, I used root mamnager to put it in the bin file within system. but the instructions on the video say to use astro and it doesnt give an option to go as deep as root manager.
Thanks

Yes unzip it but make sure its in the root of your sd. That means not folders at all. That's the command that he is making in the video. I don't think you can flash cwm 3.0 in rom manager, only revert back to earlier recoveries, for froyo roms.
Sent from my HTC Vision using XDA App

Make sure the file is named what your commanding it to be. Make sure its recovery.img no caps.
Sent from my HTC Vision using XDA App

OK so I am trying this too. I am putting the recovery image directly to the root of my sd and I can see that it's there. But in TE, I put in the commands and it tells me
flash_image: not found
It's there!!!! I can see it when I have my phone connected. What am I doing wrong?
Edit: I am running stock rooted. Does this have something to do with it?

Rooted running a stock rom? Honestly I can't tell you all I know is I'm running custom rom. If I had to guess I would say it doesn't. All I can say is I had issues until I watched the video, sorry I can't help more. Only thing I would say to do is wipe everything you did and try redoing it.
Sent from my HTC Vision using XDA App

I can say you should only have one .img in your sd to not confuse it. I'm pretty sure you can use command prompt on your pc if you have access to one.
Sent from my HTC Vision using XDA App

Ok, I think I am getting somewhere, I was searching my sdcard on my computer, and I realised that the root of my sdcard is not called "sdcard" so in the command i was doing it wrong, It is called "HTC DESIRE" so i did it in Emulator and it worked i rebooted my phone in recovery and I am now rocking the new ClockworkMod Recovery 3.0.0.5...
Thanks all for the help, Hope what i discovered helps someone else.

Wait, Wait, Wait... I just screwed it up again... I went into ROM Manager after I successfully flashed 3.0.0.5. and it was not showing that in ROM Manager, so I tapped on flash latest recovery, and damnit... it replaced all my hard work with the 2.5 recovery... I have tried to repeat the flash process a few times with 3.0, and i have not been successful... Help... I dont know what to do now!!!

Instead of flashing the recovery in rom manager, after you've inputted the
su
# flash_image recovery sdcard/recovery.img
you can just type in after it
# reboot recovery
and it will reboot you into CWM 3.0. Be sure to perform a nandroid backup under 2.2 first and when you want to go back to a froyo rom, you'll have to flash the 2.5 recovery image again.

Yes, you will not see it in rom manager. Just reboot into the recovery and if you see orange and cwm 3.0 your good. Just repeat the steps.
Sent from my HTC Vision using XDA App

mobilemidget said:
Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks
Click to expand...
Click to collapse
"flash_image: not found" means that you do not have the 'flash_image' binary installed. Follow the guide here to get 'flash_image' installed on your device (the 'flash_image' binary is attached).
As for why ROM Manager not giving the newest recovery as an option, ROM Manger isn't fully compatible with the latest recovery as it just came out. The latest recovery (I'm assuming you're referring to v3.x) is only for Gingerbread based ROM's, if you're trying to install a Froyo based ROM then you should be using recovery version 2.x.

OriginalGabriel said:
"flash_image: not found" means that you do not have the 'flash_image' binary installed. Follow the guide here to get 'flash_image' installed on your device (the 'flash_image' binary is attached).
Click to expand...
Click to collapse
I will try this tonight, thank you. I haven't run into this in any of the tutorials I've read though. I appreciate it.

Hey everyone I found a site that shows me how to flash CWM 3.0 through ROM Manager,
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-3-using-rom-manager/
However, it is not working for me, if anyone has been successful in doing it this way please let me know cause evrything i try this i still am left with CWM 2.5. I really want to try the new Cyanagen nightly ROM, but i need to have 3.0... I had it once when i was doing it through terminal, however stupid me went back into rom manager and ruined what i did, and could not redo it... i am getting frustrated.
Please Help me.
Thanks

Can't flash ClockworkMod

Hi guys.
I rooted my Tattoo, and installed ROM Manager, clicked on first option "Flash latest recovery", and when it finished it showed message "Succesfully flashed". When i rebooted to recovery it just showed yellow ! and picture of phone.
Please help I need CWM to install CM 7 because I am going on a trip.
Note: I have stock rom flashed using RUU, before that I had CM 7.
Sent from my HTC Tattoo using XDA App

PavleSRB said:
Hi guys.
I rooted my Tattoo, and installed ROM Manager, clicked on first option "Flash latest recovery", and when it finished it showed message "Succesfully flashed". When i rebooted to recovery it just showed yellow ! and picture of phone.
Please help I need CWM to install CM 7 because I am going on a trip.
Note: I have stock rom flashed using RUU, before that I had CM 7.
Sent from my HTC Tattoo using XDA App
Click to expand...
Click to collapse
You could either use automated tool from the following thread
[1 Click Root and/or Recovery]Root and ClockWorkMod 5.0.2.0 [UPDATED 02/10/11]
or look at following post for doing it manually
http://forum.xda-developers.com/showpost.php?p=9192029&postcount=21
please check existing threads before posting

I can't access my computer right now, but I rooted Tattoo with Universal Androroot, and still can't flash CWM.
Note: I used Universal Androroot while ago and I did managed to flash CWM.
Sent from my HTC Tattoo using XDA App

1. Format SDCard 2. Place the ROM in the root 3. PowerOff 4. Press HOME + EndCall Button 5. ClockWorkMod Recovery Page Will Appear. 6. Wipe n Clear...Flash
Sent from my HTC Tattoo using xda premium

Can't install ClockwordMod man. Stock recovery appears instead.
Sent from my HTC Tattoo using XDA App

PavleSRB said:
I can't access my computer right now, but I rooted Tattoo with Universal Androroot, and still can't flash CWM.
Click to expand...
Click to collapse
As you are rooted, you could flash recovery using terminal on the phone.
install terminal and Superuser from market
download CWM recovery 3.0.2 from Kalims' thread and place it in root of your sdcard
download flash_image to root of your sdcard
enter following commands in terminal
Code:
su
cp /sdcard/flash_image /data/local/flash_image
cd /data/local
chmod 04755 flash_image
./flash_image recovery /sdcard/recovery_3.2.0.1.img

Thans. I will try it. Is it posibble to install newer version of CWM via terminal?
Sent from my HTC Tattoo using XDA App

I can't download flash_image, says nothinhg was found.
Sent from my HTC Tattoo using XDA App

Try this
Do u have Universal Androot still installed on ur phone? If its there, then re-root with it and launch ROM Manager immediately after that. Flash recovery TWICE. The new CWM has problems flashing in 1st go.
And secondly, if u are on stock ROM, before updating recovery, always re-root with Androot. Because after every reboot, the tattoo_hack.ko module gets unloaded from the memory if you used Universal Androot on stock ROM.

Things to know while rooting stock ROM:
1. HTC Tattoo is HTC's first NAND locked device preventing users to write to system and recovery under normal conditions.
2. This NAND lock can be defeated by inserting tattoo_hack.ko module. This module was created on taking the help of info from a leaked QualComm datasheet.
3. The module needs to be inserted prior to writing to system or flashing recovery.
4. The manual rooting method and Maveric/NTenisOT 1-click method flashes a custom boot.img after rooting so that the NAND remains unlocked everytime the device is used. On the other hand, Universal Androot unlocks the NAND temporarily while rooting and unrooting. If Androot is used, the device gets permanently rooted, but the NAND locks itself after a reboot, until Androot is used again or tattoo_hack is inserted.
5. Custom 1.6, 2.1, 2.2 roms have tattoo_hack added to their modules list to keep NAND unlocked while device is running. On 2.3, however, the unlock code is compiled into the kernel, so the module is not needed.
6. We deal with this module because no one has developed S-OFF for the Tattoo.
7. Most users forget about this module once their Tattoo is rooted. New users oversee this module and run into problems. The CyanogenMod wiki is misleading in 'How to root Tattoo' because of this.
Finally, please sticky this info if possible because I tell this to everyone who has rooting problems.

Thanks. I did everething just like you sad, but no luck.
Sent from my HTC Tattoo using XDA App

download attached flash_image.zip and remove ".zip" extension.
and try as mentioned in my previous of my post.
And remember what sunitknandi mentioned about re-rooting with androot after a reboot.

PavleSRB said:
Thanks. I did everething just like you sad, but no luck.
Sent from my HTC Tattoo using XDA App
Click to expand...
Click to collapse
Go to universal androot. Hit root again. Let it complete.
Then use Root Explorer and mount /system as rw. Or u ca also use Terminal Emulator. Just type these.
su
mount -o remount rw /system
Close terminal.
Go to ROM Manager. Tap Flash ClockWorkMod recovery. First it will take time. Let it successfully flash. Tap again. Let it flash. Tap again. Let it flash.
I am telling you to tap this many times. Because CWM 5.0.2.0 doesnt flash easily. I got so many failed flashes even on CM7. It only gets flashed after a couple of time.
Otherwise, hit menu button on ROM Manager, slect settings and check mark 'Erase recovery before flashing'. Go back and flash recovery twice.
Finally reboot manually. No need to use ROMManager's reboot option. I read that it works rather badly on Android 1.x. Boot with HOME+POWER.
Lemme know.
Btw, the safest method to flash recovery is NTenis's tool. Used it many times without problems because it flashes the boot to disable the write-protection.

sunitknandi said:
Go to universal androot. Hit root again. Let it complete.
Then use Root Explorer and mount /system as rw. Or u ca also use Terminal Emulator. Just type these.
su
mount -o remount rw /system
Close terminal.
Go to ROM Manager. Tap Flash ClockWorkMod recovery. First it will take time. Let it successfully flash. Tap again. Let it flash. Tap again. Let it flash.
I am telling you to tap this many times. Because CWM 5.0.2.0 doesnt flash easily. I got so many failed flashes even on CM7. It only gets flashed after a couple of time.
Otherwise, hit menu button on ROM Manager, slect settings and check mark 'Erase recovery before flashing'. Go back and flash recovery twice.
Finally reboot manually. No need to use ROMManager's reboot option. I read that it works rather badly on Android 1.x. Boot with HOME+POWER.
Lemme know.
Btw, the safest method to flash recovery is NTenis's tool. Used it many times without problems because it flashes the boot to disable the write-protection.
Click to expand...
Click to collapse
Thank you so so much. I rooted using Androot, then typed commands for Terminal and finally flashed CWM from ROM Manager five or six times. Then I used Home + End call buttons and CWM was there.
BTW, thanks to rallepag, too.
Sent from my HTC Tattoo using XDA App

Good so u did it. If u feel like thanking me, would u do me a favor?
Just copy my posts about the tattoo-hack and how to fixed your problem in a thread and share with others. It will come of great help.

I will try to do that via XDA app, because my monitor is currently broken.
Sent from my HTC click using XDA App

sunitknandi said:
Go to universal androot. Hit root again. Let it complete.
Then use Root Explorer and mount /system as rw. Or u ca also use Terminal Emulator. Just type these.
su
mount -o remount rw /system
Close terminal.
Go to ROM Manager. Tap Flash ClockWorkMod recovery. First it will take time. Let it successfully flash. Tap again. Let it flash. Tap again. Let it flash.
I am telling you to tap this many times. Because CWM 5.0.2.0 doesnt flash easily. I got so many failed flashes even on CM7. It only gets flashed after a couple of time
Click to expand...
Click to collapse
Thanks for this. This has been driving me mad the past week or so!
ClockWorkMod 5.0.2.0 Seems to need 5 installs to work properly (and you granting access in the 3rd or 4th install). After that you can use the install from sd card option in rommanager!

WWWeed said:
Thanks for this. This has been driving me mad the past week or so!
ClockWorkMod 5.0.2.0 Seems to need 5 installs to work properly (and you granting access in the 3rd or 4th install). After that you can use the install from sd card option in rommanager!
Click to expand...
Click to collapse
Happy to help!
Eh hehe, its the saying in vodafone's ad.

[Q] ICS Rollback Question..

Hello guys,
I used the ics leaked rom for the Acer Iconia. And not i am stuck with it on my tablet.
I rooted it following a tutorial, and tried using clockworkmod but it always says "recovery verified failed" when i try to boot into recover using Volume+power.
I tried following a tutorial that i cant post the link to because of security here on the thread.
I get far enough to enter the CPUID but when i enter my Serial it is only 11 characters long when the EUU tool is asking for 16. I tried converting it to SBK but it still didnt work, just said wrong CPUID entered.
If anyone can please help me get ICS off my tablet and back to 3.2 or 3.1 i would greatly appreciate it!

coder_for_life22 said:
Hello guys,
I used the ics leaked rom for the Acer Iconia. And not i am stuck with it on my tablet.
I rooted it following a tutorial, and tried using clockworkmod but it always says "recovery verified failed" when i try to boot into recover using Volume+power.
I tried following a tutorial that i cant post the link to because of security here on the thread.
I get far enough to enter the CPUID but when i enter my Serial it is only 11 characters long when the EUU tool is asking for 16. I tried converting it to SBK but it still didnt work, just said wrong CPUID entered.
If anyone can please help me get ICS off my tablet and back to 3.2 or 3.1 i would greatly appreciate it!
Click to expand...
Click to collapse
Your UID number is not your serial number. If you had CWM installed, and a recovery backup made BEFORE you installed the leaked ICS, you should be able to find your original UID number on your Ext SD card in the Clockwork folder. Should be a file called UID.txt or similar.
At least I "assume" you made a recovery backup at one time or another.
If you don't have one, then you'll have to hopefully use ADB and push a new CWM recovery image to your tab. You can find more info on this procedure from the original developer (tegraowners)

Moscow Desire said:
Your UID number is not your serial number. If you had CWM installed, and a recovery backup made BEFORE you installed the leaked ICS, you should be able to find your original UID number on your Ext SD card in the Clockwork folder. Should be a file called UID.txt or similar.
At least I "assume" you made a recovery backup at one time or another.
If you don't have one, then you'll have to hopefully use ADB and push a new CWM recovery image to your tab. You can find more info on this procedure from the original developer (tegraowners)
Click to expand...
Click to collapse
Thanks i did make a backup but the backup i made does not contain this file for some reason it only contains 4 files that arent text files. Also how coult i push a new recovery image to my tab? at this point i will do ANYTHING to revert back to 3.2 or 3.1.

coder_for_life22 said:
Thanks i did make a backup but the backup i made does not contain this file for some reason it only contains 4 files that arent text files. Also how coult i push a new recovery image to my tab? at this point i will do ANYTHING to revert back to 3.2 or 3.1.
Click to expand...
Click to collapse
One more thing to try. Install Acer Recovery and try to install a new CWM recovery image that way.
or
With ADB;
use adb (PC):
1. adb push recovery.img /sdcard
2. adb push itsmagic /data/local
You can get the recovery image at the original Dev's website I mentioned earlier.
Or, you can use RA Recovery, which is really good!
http://forum.xda-developers.com/showthread.php?t=1459821

Sorry for the newbie question but where do i place the rocovery file and its magic file? I keep getting the "no such file or directory"
I am new to this.

coder_for_life22 said:
Sorry for the newbie question but where do i place the rocovery file and its magic file? I keep getting the "no such file or directory"
I am new to this.
Click to expand...
Click to collapse
Did you try getting Acer Recovery Installer from the Market? And try installing a fresh CWM Recovery image? That would be the first thing to do I would think.
But if it doesn't work, then you will have to do:
You have to use ADB to "push" a recovery image.
Usually this has 2 things. Android SDK, the downloading the ADB drivers. If successfully installed, and your tab shows up in PC Device manager as ADB Device, then is simple to open an ADB shell and push the image and "it's magic" (just make sure USB Debugging is enabled on your tab)
There are plenty of guides on installing SDK and ADB.Anybody who messes with custom Roms, Rooting, and expecially installing leaked beta roms, needs to familiarize themselves with ADB.

Maybe i didnt make my question clear. I have tried the Acer Recovery but when it tries to but into the recovery i get "recover verified failed". I am familiar with ADB i have it up and running. I already had the android-sdk installed from development i do.
But i was asking when pushing the "recovery where to i place the recovery?
When i use adb push recover-ra-3.16-gmn.img /sdcard i get
"cannot stat: no such file or directory"
I was asking where do i place the files at to successfully push them using adb?

coder_for_life22 said:
Maybe i didnt make my question clear. I have tried the Acer Recovery but when it tries to but into the recovery i get "recover verified failed". I am familiar with ADB i have it up and running. I already had the android-sdk installed from development i do.
But i was asking when pushing the "recovery where to i place the recovery?
When i use adb push recover-ra-3.16-gmn.img /sdcard i get
"cannot stat: no such file or directory"
I was asking where do i place the files at to successfully push them using adb?
Click to expand...
Click to collapse
Ah, misunderstood things. As far as I know, you can r try putting it in /System
From Terminal on tablet;
from terminal (TABLET): (thors CWM)
su
chmod 755 /data/local/itsmagic
mount -o rw,remount /system
rm /system/etc/install-recovery.sh
mount -o ro,remount /system
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p1
./data/local/itsmagic

Thanks! So once i push the itsmagic and RA recover to my tab what do i do next?

coder_for_life22 said:
Thanks! So once i push the itsmagic and RA recover to my tab what do i do next?
Click to expand...
Click to collapse
According to Drellisdee, these are his instructions'
Install itsmagic:
1. Copy itsmagic somewhere to /data or /cache, and set chmod 755 to it.
adb push recovery-ra-iconia-3.13-gnm.img /sdcard
adb shell
su
dd if=/sdcard/recovery-ra-iconia-3.13-gnm.img of=/dev/block/mmcblk0p1
sync
reboot recovery
(I never used this method, I used the flash zip version.)
---------- Post added at 10:56 PM ---------- Previous post was at 10:53 PM ----------
Other notes from the It's Magic Thread.
Flash a custom recovery:
1. dd the new recovery to mmcblk0p1:
e.g.
Code:
dd if=/mnt/external_sd/cwm.bin of=/dev/block/mmcblk0p1
2. Call itsmagic
3. Reboot. Bootloader will do the rest
4. Boot into recovery and see if it works
5. Every time you change mmcblk0p1 or mmcblk0p2, itsmagic must be called again.
Pretty much the same as Drellisdee had.

When i try to "adb push recovery-ra-iconia-3.13-gnm.img /sdcard"
I get "File cannot be pushed: Is A Directory"
Any ideas?

coder_for_life22 said:
When i try to "adb push recovery-ra-iconia-3.13-gnm.img /sdcard"
I get "File cannot be pushed: Is A Directory"
Any ideas?
Click to expand...
Click to collapse
Not a clue.
Try posting on Drellisdee's thread for the recovery. He's usually pretty good about answering. Or send him a PM. He should be able to fix you right up
Interesting, you are not the only one to mess up the recovery with the ICS leak. Saw a couple others lately, and they were both running CWM. You might want to look in Taboonay, Lightspeed, and Flexreaper thread. I think that's where I might have seen them. At least I think.
---------- Post added at 11:17 PM ---------- Previous post was at 11:14 PM ----------
Never mind the previous post. I found the thread.
http://forum.xda-developers.com/showthread.php?t=1552010
The guy used Acer Recovery to install the RA Recovery. CWM wouldn't install.
So try Acer Recovery, and use RA

hi guys i have been soo fustrated trying to roll my iconia back from the ics leak!
I tried to use some of the methods on a thread i posted earlier but no luck =(
I always get the error "recovery verified failed" when i try to boot into recovery mode.
Does ANYONE know anything that can fix this issue and help me rollback my tablet?
Thanks guys

coder_for_life22 said:
Hello guys,
I used the ics leaked rom for the Acer Iconia. And not i am stuck with it on my tablet.
I rooted it following a tutorial, and tried using clockworkmod but it always says "recovery verified failed" when i try to boot into recover using Volume+power.
I tried following a tutorial that i cant post the link to because of security here on the thread.
I get far enough to enter the CPUID but when i enter my Serial it is only 11 characters long when the EUU tool is asking for 16. I tried converting it to SBK but it still didnt work, just said wrong CPUID entered.
If anyone can please help me get ICS off my tablet and back to 3.2 or 3.1 i would greatly appreciate it!
Click to expand...
Click to collapse
How are you getting this serial # your using? Every method I have seen out there to roll back needs this cpuid#
Sent from my A500 using xda premium

rdnkchevy said:
How are you getting this serial # your using? Every method I have seen out there to roll back needs this cpuid#
Sent from my A500 using xda premium
Click to expand...
Click to collapse
I would suppose the "serial#" is the tabs serial number.
I know with RA recovery, the backup contains a UID.txt file. Not sure what would be in Clockwork. I don't have any to check, so not sure if clockwork keeps the UID number.

[Q] No access to recovery

Hello,
I plan to install a custom rom, and for that I followed all the tutorials on the web without success.
Using Acer recovery install, whatever the chosen recovery I get the error "recovery verified failed", and flashing the stock 4.03 recovery I have bugdroid lying.
Using AfterOta, it freezes at step 3/5 and Blackthund3r, it stuck stage two..
I have a bootloader and ICS 4.0.3 OTA maj.
If someone has an idea, I'd be grateful
Thanks !

babysugar said:
Hello,
I plan to install a custom rom, and for that I followed all the tutorials on the web without success.
Using Acer recovery install, whatever the chosen recovery I get the error "recovery verified failed", and flashing the stock 4.03 recovery I have bugdroid lying.
Using AfterOta, it freezes at step 3/5 and Blackthund3r, it stuck stage two..
I have a bootloader and ICS 4.0.3 OTA maj.
If someone has an idea, I'd be grateful
Thanks !
Click to expand...
Click to collapse
Rooted?
Yes? use AcerRI to install any recovery.
Download thor200240/digetx CWM 1.7.3.zip here
Copy zip to SD card
Reboot to recover.
Install from zip file > Choose file from SD Card
Select the zip and install.
Reboot to recover if u see CWM 1.7.3 ur set.
Full Backup
Save your cpuid (In your CWM folder on your sd card inside the backup files u just made. Should be a text file named uid.txt or cpuid.txt.)
Copy any compatible rom onto your SD card
Wipe data, cache and dalvik
Flash your rom the same way u installed the .zip file.

Thank you for your response.
Yes, I'm rooted and I already tried Acer Recovery Install without success...
I get "recovery verified failed" (in red)...

tried all the recoveries in ARI?
use adb to install the zip then.

shadowmikeshadow said:
tried all the recoveries in ARI?
use adb to install the zip then.
Click to expand...
Click to collapse
I tried all the recovery... And I don't know how to use adb :s can you quickly explain ?

use the platformer tool link below to use adb so u dont need sdk.
Follow instructions on platformer tool download page to set up your adb
open command prompt and navigate to your platformer
cmd commands:
view available directories: dir
change directory: cd (cd desktop (forward directory example) / cd .. (up directory example))
Use this guide to install with adb
cwm: here
platformer: here

Ok, I'll try later because I can't now and I tell you !
Thanks !!

make sure your rooted too, that could be causing the issue with ari..
download root checker from play store its free

shadowmikeshadow said:
make sure your rooted too, that could be causing the issue with ari..
download root checker from play store its free
Click to expand...
Click to collapse
I already checked, I'm rooted

Having the same issue.
I will also look into adb tool because I'm in the same boat. I did pretty much the same thing and am also stuck with the same error message and can't access the Recovery mode.

shadowmikeshadow said:
make sure your rooted too, that could be causing the issue with ari..
download root checker from play store its free
Click to expand...
Click to collapse
I don't understand.
I put the recovery on sdcard with adb, and next ? How should I install it ?

Follow this guide here
but use the recovery from the zip in earlier post.

[Q] how to install a modem.zip or .img

good day guys
i have looked and looked, my lg d802 is rooted and i have twrp recovery installed, with 4.4.2 android version, my question
can someone tell me how can i flash a modem.img or modem.zip?
when i use the application twrp from andriod and say install from zip it reboots to recovery mood when i can restart my system or update from cash or update from adb
what do i do next, where do i find the zip file, if i push the file through su terminal emulator where can i find it or how can i flash it afterwords, i want to change my radio version coz my signal keeps dropping all the time
thanks in advanced

Rabia said:
good day guys
i have looked and looked, my lg d802 is rooted and i have twrp recovery installed, with 4.4.2 android version, my question
can someone tell me how can i flash a modem.img or modem.zip?
when i use the application twrp from andriod and say install from zip it reboots to recovery mood when i can restart my system or update from cash or update from adb
what do i do next, where do i find the zip file, if i push the file through su terminal emulator where can i find it or how can i flash it afterwords, i want to change my radio version coz my signal keeps dropping all the time
thanks in advanced
Click to expand...
Click to collapse
Flash it with flashify
:good:

xlr8me said:
Flash it with flashify
:good:
Click to expand...
Click to collapse
have you tried it with modem?

download this : https://mega.co.nz/#!kcVxSLaB!BJ4hHTF_3H8HR6EJTuak2hjiK1g1JosdKDfhcQ9Kr8g
and apply it.

somboons said:
download this : https://mega.co.nz/#!kcVxSLaB!BJ4hHTF_3H8HR6EJTuak2hjiK1g1JosdKDfhcQ9Kr8g
and apply it.
Click to expand...
Click to collapse
could you elaborate, if i need to install it in my phone how can i if i cant install zip file through twrp?

Rabia said:
could you elaborate, if i need to install it in my phone how can i if i cant install zip file through twrp?
Click to expand...
Click to collapse
Why don't you try to install via twrp ?
You can't install roms you mean?

bender_007 said:
Why don't you try to install via twrp ?
You can't install roms you mean?
Click to expand...
Click to collapse
i rooted my mobile and found a software twrp on my device, if i say install from zip and slide, it reboots to recovery mode where it gives me yet another option, ones to restart system, another to install from cache and i go inside all folders but cant find my zip file, another it says from sdcard but when i choose it says cannot mount sd, and the final is to install from adb but i dont know how to install from adb

Rabia said:
i rooted my mobile and found a software twrp on my device, if i say install from zip and slide, it reboots to recovery mode where it gives me yet another option, ones to restart system, another to install from cache and i go inside all folders but cant find my zip file, another it says from sdcard but when i choose it says cannot mount sd, and the final is to install from adb but i dont know how to install from adb
Click to expand...
Click to collapse
Just type "adb sideload" in google or youtube.

bender_007 said:
Just type "adb sideload" in google or youtube.
Click to expand...
Click to collapse
okay thats a good start i shall try and see, thanks, any how if you have any other thoughts i would be greatfull
regards

bender_007 said:
Why don't you try to install via twrp ?
You can't install roms you mean?
Click to expand...
Click to collapse
But how can I flash the modem.bin extracted from kdz?
Sent from my LG-D802 using Tapatalk