Database Users

Flashing new recovery isnt working.

Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks

mobilemidget said:
Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks
Click to expand...
Click to collapse
Did u delete the name on the recoveryname.img upon flashing??
Sent from my HTC Vision using XDA App

Download Root Explorer and navigate to /system/bin
Make sure /system is mounted in r/w then take this attached file, unzip it, and place it inside of /system/bin
Go back into terminal and try that command again.

ok so I installed root manager, and put the flash_image.zip in the system/bit, and tried it again with the terminal emulator, but i still have no results, it says after the pause when you plress enter after the flash_image prompt, your supposed to reboot the phone and it should start with the new recovery, but when i open ROM manager it staill shows V 2.5.... If i did somthing wrong i cant figure it out., Please help.
Thanks

http://www.youtube.com/watch?v=w4QViSam2og&feature=youtube_gdata_player
Follow these instructions. You can't go wrong. Make sure you back out of the app and go back in. It sets the cursor to the correct posistion. All you have to do is put the .img in the root of your sd. Hope this helps, it did for me.
Sent from my HTC Vision using XDA App

wait, so why aren't you just flashing the recovery through ROM manager? Are you trying to install CWR 3.0+?

yes I am trying to flash cwm 3.0, and it is not an option with ROM manager. I will try the Youtube instructions. Thanks

Ok so I tried the instructions with the Youtube video, and when i do the cmd promt in Terminal i get this;
Cant open device: "/dev/block/mmcblk0"
error in reading mbr!
failed with error: -1
I have the recovery.img file (not zip) on the sd card, I used root mamnager to put it in the bin file within system. but the instructions on the video say to use astro and it doesnt give an option to go as deep as root manager.
Thanks

Yes unzip it but make sure its in the root of your sd. That means not folders at all. That's the command that he is making in the video. I don't think you can flash cwm 3.0 in rom manager, only revert back to earlier recoveries, for froyo roms.
Sent from my HTC Vision using XDA App

Make sure the file is named what your commanding it to be. Make sure its recovery.img no caps.
Sent from my HTC Vision using XDA App

OK so I am trying this too. I am putting the recovery image directly to the root of my sd and I can see that it's there. But in TE, I put in the commands and it tells me
flash_image: not found
It's there!!!! I can see it when I have my phone connected. What am I doing wrong?
Edit: I am running stock rooted. Does this have something to do with it?

Rooted running a stock rom? Honestly I can't tell you all I know is I'm running custom rom. If I had to guess I would say it doesn't. All I can say is I had issues until I watched the video, sorry I can't help more. Only thing I would say to do is wipe everything you did and try redoing it.
Sent from my HTC Vision using XDA App

I can say you should only have one .img in your sd to not confuse it. I'm pretty sure you can use command prompt on your pc if you have access to one.
Sent from my HTC Vision using XDA App

Ok, I think I am getting somewhere, I was searching my sdcard on my computer, and I realised that the root of my sdcard is not called "sdcard" so in the command i was doing it wrong, It is called "HTC DESIRE" so i did it in Emulator and it worked i rebooted my phone in recovery and I am now rocking the new ClockworkMod Recovery 3.0.0.5...
Thanks all for the help, Hope what i discovered helps someone else.

Wait, Wait, Wait... I just screwed it up again... I went into ROM Manager after I successfully flashed 3.0.0.5. and it was not showing that in ROM Manager, so I tapped on flash latest recovery, and damnit... it replaced all my hard work with the 2.5 recovery... I have tried to repeat the flash process a few times with 3.0, and i have not been successful... Help... I dont know what to do now!!!

Instead of flashing the recovery in rom manager, after you've inputted the
su
# flash_image recovery sdcard/recovery.img
you can just type in after it
# reboot recovery
and it will reboot you into CWM 3.0. Be sure to perform a nandroid backup under 2.2 first and when you want to go back to a froyo rom, you'll have to flash the 2.5 recovery image again.

Yes, you will not see it in rom manager. Just reboot into the recovery and if you see orange and cwm 3.0 your good. Just repeat the steps.
Sent from my HTC Vision using XDA App

mobilemidget said:
Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks
Click to expand...
Click to collapse
"flash_image: not found" means that you do not have the 'flash_image' binary installed. Follow the guide here to get 'flash_image' installed on your device (the 'flash_image' binary is attached).
As for why ROM Manager not giving the newest recovery as an option, ROM Manger isn't fully compatible with the latest recovery as it just came out. The latest recovery (I'm assuming you're referring to v3.x) is only for Gingerbread based ROM's, if you're trying to install a Froyo based ROM then you should be using recovery version 2.x.

OriginalGabriel said:
"flash_image: not found" means that you do not have the 'flash_image' binary installed. Follow the guide here to get 'flash_image' installed on your device (the 'flash_image' binary is attached).
Click to expand...
Click to collapse
I will try this tonight, thank you. I haven't run into this in any of the tutorials I've read though. I appreciate it.

Hey everyone I found a site that shows me how to flash CWM 3.0 through ROM Manager,
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-3-using-rom-manager/
However, it is not working for me, if anyone has been successful in doing it this way please let me know cause evrything i try this i still am left with CWM 2.5. I really want to try the new Cyanagen nightly ROM, but i need to have 3.0... I had it once when i was doing it through terminal, however stupid me went back into rom manager and ruined what i did, and could not redo it... i am getting frustrated.
Please Help me.
Thanks

[GUIDE] Install ClockworkMod Recovery image after updated to 2.3.4 (GRJ22).

Not applicable
Delete this thread

Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!

Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.

Let me answer myself.
I don't think the latest rom 2.3.4 is compatible with the clockwork you supplied. So I have to flash my phone back to GRH78. I downloaded the stock ROM from the internet. and then push all the images file into /sdcard/clockworkmod/backup/2010.xxx.
Next, I restore the image in clockwork menu.
after restore, reboot the phone, now I am back in business.
When the phone is boot, i lost the root again, so i went to modaco.com and get Paul's package. run it, restart, I got the root.
Finally, go to market place and get ROM Manager, install the clockwordmod. and I have a 'proper' phone.
although I don't have the least rom, at least i got a working phone that is rooted.

bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
I have the same problem. How did you handle it?

Wow, why risk messing up your phone with flashing a boot.img when you can just rename /etc/install-recovery.sh to something like /etc/install-recovery.bak?
Here's one way to rename (courtesy of Matridom). Another is to use Root Explorer.
Matridom said:
The new update applies the install-recovery.sh script into our phones (not there previously.
Boot into the bootloader
flash CWM
select recovery from the bootloader (DO NOT reboot the phone)
apply the su binary
boot into the OS and test root
make sure busybox is properly installed
run ADB shell
then:
Code:
su
mount -o remount,rw /dev/block/mtdblock3 /system
mv /system/etc/install-recovery.sh /system/etc/install-recovery.bak
Boot back into the bootloader and re-flash CWM, should stay permanent now.l had applied the SU binary at the same time as the OTA update, then renamed the installer script and flashed back CWM.
Click to expand...
Click to collapse

andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
same here someone please help ?

This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App

bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
Hi Bante, I am sorry for the inconvenience. I have revert back the CWM Recovery to 3.0.2.4. You can download it at the link above, and try it again
I hope that the problem you mention wont persist anymore

zero383 said:
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I am sorry but not all people can successfully use Command Prompt to do so.
I cant use command prompt, as it says "Image cant be loaded".
So I had to use this method.
I search around the forum and seen this as a quite common problem,
so I decided to share it
Hope you understand.
Anyway, thanks for your method too Cheers

andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist

16vMK1 said:
same here someone please help ?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist

Wow people like to make things complicated. Why install an entire rom to get ride of a script?
if you can flash cwm, you should have some basic understanding of fastboot, adb and the search options in the forums. the answers are all there already.
Sent from my Nexus S

No disrespect, I agree flashing recoverys should only be done after you understand how to use the tools to do it. there is no reason someone who is going to mod systems on their nexus shouldn't be able to use fastboot and adb properly. all the right drivers are in the sdk.
Sent from my Nexus S 4G using Tapatalk

nxt said:
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Click to expand...
Click to collapse
This is what I did.
I rooted my NS, which had 2.3.3
Used phone with stock 2.3.3 until I figured out which ROM I want to flash.
Before I flashed any ROM, did a Nandroid Backup through CWM.
Used the ROM for a few days, but when I saw that official update is ready for download for i9020A, did do a restore from the Nandroid backup I created.
Updated from 2.3.3 to 2.3.4, phone works fantastic, video chat also works great.
After update when I tried using any of the apps required SU permission, they didn't work. I tried installing a couple of .apk files, couldn't either install it or after installation it didn't work.
Thought let me try wiping my phone clean and start all over again, may be I will use a custom ROM again, downloaded ROM, went to ROM Manager to reboot into recovery, nothing happens.
Tried booting into Recovery option manually by pressing Volume Up and Power button, nothing happens but the Bot with an Arrow appears on screen.
So, I thought I will follow this procedure to reflash CWM to my phone and get it going. I was able to use the command FastBoot once, and suceeded pushing .img file to my phone but now whenever I try using the commands from my computer, this error message appears : "This application has failed to start becasue AdbWinApi.dll was not found. Re-installing the application may fix this problem."
Why this error message if I have the sdk on my computer already through which I was once able to push .img file without any troubles?
Can anyone tell me what would be a possible solution?
Also, how can I fix this problem and get ClockWorkMod Recovery installed on my NS again?
How can I get stock recovery image on my phone if I want start all over again from scratch?
Thx a million.
Edit ::: I found the answer as to how to how to install CWM again. Thx anyways.
Other question still remains a puzzle... why am I not able to install certain programs or if did manage to install, can't run them?

I ran your method and I think I'm stuck at some step...
My phone now default boots into CWM 3.0.2.4
Recovery boots to a newer recovery I flashed.
How do I get my phone to default boot into the OS again?
Edit: nevermind, just downloaded the full 2.3.4 rom, extracted and flashed the original boot.img.

dreamsforgotten said:
All the right drivers are in the sdk.
Click to expand...
Click to collapse
After installing the sdk and a platform, I have adb, but where is fastboot?

I was getting the same error as "Image cant be loaded". after hours of struggling I found that It's only because I was not in the same directory as the img file. silly eh?

hi,did you repaiar your phone,i have try everything but it just keep going in clockwork mode,if i than pres reboot now in clockworkmode it stays on google padlock
i realy need phone if you can help or someone else,than ....

just tried this method of window7 (thanks for the work) with cwm 3.0.2.4, but got the same result like the others in this thread: cant boot the android 2.3.4, the system is always booting into the cwm, no way out.
I don't think this tool works as it should.
:-(
EDIT:
I didn't realize that window7's tool would install the cwm into the boot-partition instead of the recovery-partition.
To get my boot partition back I downloaded the 2.3.4 firmware image from http://forum.xda-developers.com/showthread.php?t=1056062 and extracted the boot.img from the zip.
with "fastboot flash boot boot.img" I restored my orginal boot partition an can boot into android again.
(fastboot is part of the android sdk)

root 4.2.2. without flashing customer recovery

Good morning guys,
I see a lot of threads here about rooting 4.2.2, but in all of them it is recommended to root the phone by installing zip archive from a custom recovery.
I don't want to change stock recovery - is there any way to root it by flashing img from adb? I did it in this way on 4.2.1, by installing CF-Auto-Root-mako-occam-nexus4.img file from adb.
Can anyone advice how to get root without flashing custom recovery?

I have to ask,....why would you NOT want a custom recovery? What is the point in using a crippled stick recovery?
From my Evo LTE, yup.

Look at this How to thread in the general section, I copied and pasted relevant information. I kept a custom recovery and didn't try this method, but it says it will not flash a custom recovery.
E. Optional -- Root
If you want to get root access follow the steps below. (And no, this will not flash a custom recovery, and not, it will not make you "not stock".) Unlocked bootloader required. See steps above.
1) Download (to your computer) the latest version of CWM (from here) or TWRP (from here) for your device;
2) Rename the file to customrecovery.img, and make sure it is in the same directory as your fastboot.exe file;
3) Download (to /sdcard on your device) the latest version of either ChainsDD's Superuser (not currently working), or Chainfire's SuperSU;
4) Restart your device in fastboot mode and plug into computer;
5) Open a command prompt in the directory mentioned above and type: fastboot boot customrecovery.img
6) Wait for it to boot;
7) Navigate the menus the recovery menu on your device and select an option like "update zip from sdcard". Find the zip that you downloaded, and apply it.
8) Reboot. Done.

You can flash custom recovery via fastboot, use it to install su.zip and when you will choose restart after that, you will have question about you want custom recovery permanently or not, if you choose no then after restart you will have stock recovery

scottspa74 said:
I have to ask,....why would you NOT want a custom recovery? What is the point in using a crippled stick recovery?
From my Evo LTE, yup.
Click to expand...
Click to collapse
I want to make installing of future OTA as simple as possible. So I will get root and freeze all the system apps i don't want to be run, but when OTA comes I will be able to install it and will not receive any error messages which i had during this OTA.
It seems like this is a good solution:
5) Open a command prompt in the directory mentioned above and type: fastboot boot customrecovery.img
Click to expand...
Click to collapse
Do i understand correctly that this boots customer recovery on my phone from PC hard drive, but doesn't flash it to the phone? So, I'm able to install root.zip from it, but when i reboot the phone I don't have a custom recovery.

You can do as i mentioned in my post before or you can use as well command mentioned by ketjr81: fastboot boot nameofrecovery.img in both cases you will have had stock recovery after restart

Thank you guys, you have solved my issue. Now i have to find a ZIP with root to flash.

fatum2002 said:
Thank you guys, you have solved my issue. Now i have to find a ZIP with root to flash.
Click to expand...
Click to collapse
you find it in thread mentioned by ketjr81

[Q] Galaxy S4 GE no root after motochopper

Ok, I'm total noob but not complete idiot. Just want to get that out of the way
I have have the Galaxy S4 Google Edition running Android 4.3.
I unlocked the bootloader before the Android 4.3 update, but have never had root access. I've tried motochopper program, but keep getting failure errors and continued no root.
What I'd like to do is restore my device to stock and run it over again. I'm sure I did something wrong at somepoint.
Can someone please help me?
Thanks

nhlfan14 said:
Ok, I'm total noob but not complete idiot. Just want to get that out of the way
I have have the Galaxy S4 Google Edition running Android 4.3.
I unlocked the bootloader before the Android 4.3 update, but have never had root access. I've tried motochopper program, but keep getting failure errors and continued no root.
What I'd like to do is restore my device to stock and run it over again. I'm sure I did something wrong at somepoint.
Can someone please help me?
Thanks
Click to expand...
Click to collapse
1. Go here and download the CWM / TWRP / MobileODIN installable ZIP
http://forum.xda-developers.com/showthread.php?t=1538053
Place the installable zip on your INTERNAL SD Card.
2. Get CWM:
http://www.clockworkmod.com/rommanager
Go here and grab CWM 6.0.3.6 for the INTERNATIONAL I9505 - yes, it works on the I9505G
Put your phone in fastboot mode by turning off the phone completely. Hold down Vol-Up Vol-Down and power simultaneously.
Since you already seem to have adb, you probably have the fastboot executable.
From your computer's command line type "fastboot boot recovery-clockwork-6.0.3.6-jfltexx.img"
This will boot recovery - temporarily - it will not overwrite the recovery on your phone.
Choose install zip from sdcard. Navigate to the installable zip that you placed on you sdcard in a prior step.
Reboot. When CWM asks to fix "this may overwrite your recovery" SAY NO. Just let it reboot.
You will be rooted. Download and install busybox from the market to complete the process.

bleez99 said:
1. Go here and download the CWM / TWRP / MobileODIN installable ZIP
http://forum.xda-developers.com/showthread.php?t=1538053
Place the installable zip on your INTERNAL SD Card.
2. Get CWM:
http://www.clockworkmod.com/rommanager
Go here and grab CWM 6.0.3.6 for the INTERNATIONAL I9505 - yes, it works on the I9505G
Put your phone in fastboot mode by turning off the phone completely. Hold down Vol-Up Vol-Down and power simultaneously.
Since you already seem to have adb, you probably have the fastboot executable.
From your computer's command line type "fastboot boot recovery-clockwork-6.0.3.6-jfltexx.img"
This will boot recovery - temporarily - it will not overwrite the recovery on your phone.
Choose install zip from sdcard. Navigate to the installable zip that you placed on you sdcard in a prior step.
Reboot. When CWM asks to fix "this may overwrite your recovery" SAY NO. Just let it reboot.
You will be rooted. Download and install busybox from the market to complete the process.
Click to expand...
Click to collapse
Worked like a charm! Only hiccup I had was it wouldn't let me access the file from the SD card, only internal memory.
2nd question is, IF i needed to restore everything to stock again at some point in the future, what steps would I need to take?

nhlfan14 said:
Worked like a charm! Only hiccup I had was it wouldn't let me access the file from the SD card, only internal memory.
2nd question is, IF i needed to restore everything to stock again at some point in the future, what steps would I need to take?
Click to expand...
Click to collapse
Since you have the stock recovery, all you need to do is unroot and you're done. Triangle Away works fine for the I9505G just in case you've bumped you flash counter. Ah yes, search the forums for busybox uninstaller. It's also a flashable zip.
Please hit the thanks button if this helped.
When dialog fails, it's time for violence.

Can someone help me again. I'd like to restore the phone to complete stock. I followed the instuctions here:
http://forum.xda-developers.com/showthread.php?t=2265477
But i get a SECURE CHECK FAIL : SBL2 error.
I just want to start fresh.
thanks.

nhlfan14 said:
Can someone help me again. I'd like to restore the phone to complete stock. I followed the instuctions here:
http://forum.xda-developers.com/showthread.php?t=2265477
But i get a SECURE CHECK FAIL : SBL2 error.
I just want to start fresh.
thanks.
Click to expand...
Click to collapse
Anybody?

nhlfan14 said:
Anybody?
Click to expand...
Click to collapse
U can try follow this guide: HERE

[Q] how to install a modem.zip or .img

good day guys
i have looked and looked, my lg d802 is rooted and i have twrp recovery installed, with 4.4.2 android version, my question
can someone tell me how can i flash a modem.img or modem.zip?
when i use the application twrp from andriod and say install from zip it reboots to recovery mood when i can restart my system or update from cash or update from adb
what do i do next, where do i find the zip file, if i push the file through su terminal emulator where can i find it or how can i flash it afterwords, i want to change my radio version coz my signal keeps dropping all the time
thanks in advanced

Rabia said:
good day guys
i have looked and looked, my lg d802 is rooted and i have twrp recovery installed, with 4.4.2 android version, my question
can someone tell me how can i flash a modem.img or modem.zip?
when i use the application twrp from andriod and say install from zip it reboots to recovery mood when i can restart my system or update from cash or update from adb
what do i do next, where do i find the zip file, if i push the file through su terminal emulator where can i find it or how can i flash it afterwords, i want to change my radio version coz my signal keeps dropping all the time
thanks in advanced
Click to expand...
Click to collapse
Flash it with flashify
:good:

xlr8me said:
Flash it with flashify
:good:
Click to expand...
Click to collapse
have you tried it with modem?

download this : https://mega.co.nz/#!kcVxSLaB!BJ4hHTF_3H8HR6EJTuak2hjiK1g1JosdKDfhcQ9Kr8g
and apply it.

somboons said:
download this : https://mega.co.nz/#!kcVxSLaB!BJ4hHTF_3H8HR6EJTuak2hjiK1g1JosdKDfhcQ9Kr8g
and apply it.
Click to expand...
Click to collapse
could you elaborate, if i need to install it in my phone how can i if i cant install zip file through twrp?

Rabia said:
could you elaborate, if i need to install it in my phone how can i if i cant install zip file through twrp?
Click to expand...
Click to collapse
Why don't you try to install via twrp ?
You can't install roms you mean?

bender_007 said:
Why don't you try to install via twrp ?
You can't install roms you mean?
Click to expand...
Click to collapse
i rooted my mobile and found a software twrp on my device, if i say install from zip and slide, it reboots to recovery mode where it gives me yet another option, ones to restart system, another to install from cache and i go inside all folders but cant find my zip file, another it says from sdcard but when i choose it says cannot mount sd, and the final is to install from adb but i dont know how to install from adb

Rabia said:
i rooted my mobile and found a software twrp on my device, if i say install from zip and slide, it reboots to recovery mode where it gives me yet another option, ones to restart system, another to install from cache and i go inside all folders but cant find my zip file, another it says from sdcard but when i choose it says cannot mount sd, and the final is to install from adb but i dont know how to install from adb
Click to expand...
Click to collapse
Just type "adb sideload" in google or youtube.

bender_007 said:
Just type "adb sideload" in google or youtube.
Click to expand...
Click to collapse
okay thats a good start i shall try and see, thanks, any how if you have any other thoughts i would be greatfull
regards

bender_007 said:
Why don't you try to install via twrp ?
You can't install roms you mean?
Click to expand...
Click to collapse
But how can I flash the modem.bin extracted from kdz?
Sent from my LG-D802 using Tapatalk