Related
1- flash MJ9_BTU UK
2- root with CF_AUTOROOT
3- download CSC Changer from ply store and change CSC on BTU
4- download & use triangleaway for counter reset
5-flash MJ9 again
6-boot in to recovry wipe data/fact_reset, wipe cashe & dalvike
reboot and on wifi check update you will get MK6 OTA
(hagi-naser)
This has been posted so many times that I have lost count.
Sent from my GT-I9300 using Tapatalk
Steps #5 & 6 can be skipped and replaced by the following steps:
*remove the root via SuperSU app
*do factory reset in settings/accounts/backup & reset.
Sent from my GT-I9300 using xda app-developers app
any chance to root without using pc?
Sent from my GT-I9300 using xda premium
CWM
[tapatalk]dki[/tapatalk]
But I also need pc to install cwm... stock recovery cant flash .zip recovery right?
Sent from my GT-I9300 using xda premium
Before u start make backups of ur files /EFS , /myown**** and any /others if u need them. REMEMBER u doing this on ur own risk.
What do u need:
1. Win rar LINK
2. USB drivers for our device LINK
3. Odin LINK
4. Official firmware LINK
5. Cf-auto-root LINK
6. SuperSU flashable zip file LINK
7. LATER download "csc changer" LINK and app root uninstaller LINK.
What to do:
1. Install win rar on ur computer.
2. Unpack USB drivers and install.
3. Unpack official firmware once (ONLY ONCE!).
4. Put your phone to download mode (Turn off him, press and hold "volume DOWN"+Home buttom+power and hold untill ur screen look like that LINK
Next press "volume up" to confirm. Then ur screen should be like this LINK
5. Connect your device to pc by USB cable. REMEMBER! Always use usb port from back panel of ur pc. NEVER use usb from keyboard, hubs or front usb panel. They can not hold power and conection will be lost (which can make huge problem for u and ur device).
6. Flash official firmware by Odin.
7. When ur device will restart and boot corectly put on ur storage cf-auto-root zip file (DO NOT UNPACK IT!).
8. Turn off ur phone, press and hold "volume UP"+home buttom+power. Screen should look like this LINK
There u can navigate up and down by volume buttoms and accept by short pressing power buttom.
9. Navigate to "install zip from SD card", navigate to cf-auto-root ziped file and press accept by power buttom. Now you should see many of: NO NO NO YES NO NO NO
Navigate to YES and accept. Some letters will apear and when it done press "reboot system now"
10. When your phone boot corectly put on your storage SuperSU flashable zip file (DO NOT UNPACK IT) and delete cf-auto-root zip file
11. Turn off ur phone, press and hold "volume UP"+home buttom+power.
12. Navigate to "install zip from SD card", navigate to SuperSU flashable zip file and install it by the same way as cf root. When done press "reboot system now".
13. When phone boot corectly go to Supersu app and open it, and look is it work fine. You can download root checker from here LINK Open it, press "verify root access". If SuperSU appear, grant root permission for app and you should see LINK.
14. Go to "playstore" use search and find "Samsung Galaxy S / S2 / S3 CSC". Big S letter on image
Here is google play by PC LINK
15. Install and open this app. Ofc grant root permission for app when ask for it. Press "change csc" and on list use "BTU".
16. Reboot device.
17. Download from playstore "Root App Delete" or from pc LINK
18. Instal app from 17 point and open it. Grant root permission, navigate to system apps and find on list app "CWM Menager" with this image icon LINK, uninstall it. Close "Root App Delete" we will not need it anymore.
19. Open SuperSU app, go to settings and press "Full Unroot". It will uninstall SuperSU.
20. Turn off ur phone, press and hold "volume UP"+home buttom+power. Wipe data/factory reset, wipe cache partition, advenced -> wipe dalvik cache. Reboot system now.
21. After device boot corectly go to apps-> Settings-> Accounts (Tab)-> Backup and reset-> "Factory data reset"-> reset device
22. After ur phone boot corectly go to apps-> Settings-> More(Tab)-> About device-> Software update
23. Get your OTA update
This is for NOOBS guide made by me. If i made some mistakes let me know to correct. I wrote it from my memories of week ago
Press thanks if helped
----
12.12.13 - fixed link to FW
----
maqikpl said:
Before u start make backups of ur files /EFS , /myown**** and any /others if u need them. REMEMBER u doing this on ur own risk.
What do u need:
1. Win rar LINK
2. USB drivers for our device LINK
3. Odin LINK
4. Official firmware LINK
5. Cf-auto-root LINK
6. SuperSU flashable zip file LINK
7. LATER download "csc changer" LINK and app root uninstaller LINK.
What to do:
1. Install win rar on ur computer.
2. Unpack USB drivers and install.
3. Unpack official firmware once (ONLY ONCE!).
4. Put your phone to download mode (Turn off him, press and hold "volume DOWN"+Home buttom+power and hold untill ur screen look like that LINK
Next press "volume up" to confirm. Then ur screen should be like this LINK
5. Connect your device to pc by USB cable. REMEMBER! Always use usb port from back panel of ur pc. NEVER use usb from keyboard, hubs or front usb panel. They can not hold power and conection will be lost (which can make huge problem for u and ur device).
6. Flash official firmware by Odin.
7. When ur device will restart and boot corectly put on ur storage cf-auto-root zip file (DO NOT UNPACK IT!).
8. Turn off ur phone, press and hold "volume UP"+home buttom+power. Screen should look like this LINK
There u can navigate up and down by volume buttoms and accept by short pressing power buttom.
9. Navigate to "install zip from SD card", navigate to cf-auto-root ziped file and press accept by power buttom. Now you should see many of: NO NO NO YES NO NO NO
Navigate to YES and accept. Some letters will apear and when it done press "reboot system now"
10. When your phone boot corectly put on your storage SuperSU flashable zip file (DO NOT UNPACK IT) and delete cf-auto-root zip file
11. Turn off ur phone, press and hold "volume UP"+home buttom+power.
12. Navigate to "install zip from SD card", navigate to SuperSU flashable zip file and install it by the same way as cf root. When done press "reboot system now".
13. When phone boot corectly go to Supersu app and open it, and look is it work fine. You can download root checker from here LINK Open it, press "verify root access". If SuperSU appear, grant root permission for app and you should see LINK.
14. Go to "playstore" use search and find "Samsung Galaxy S / S2 / S3 CSC". Big S letter on image
Here is google play by PC LINK
15. Install and open this app. Ofc grant root permission for app when ask for it. Press "change csc" and on list use "BTU".
16. Reboot device.
17. Download from playstore "Root App Delete" or from pc LINK
18. Instal app from 17 point and open it. Grant root permission, navigate to system apps and find on list app "CWM Menager" with this image icon LINK, uninstall it. Close "Root App Delete" we will not need it anymore.
19. Open SuperSU app, go to settings and press "Full Unroot". It will uninstall SuperSU.
20. Turn off ur phone, press and hold "volume UP"+home buttom+power. Wipe data/factory reset, wipe cache partition, advenced -> wipe dalvik cache. Reboot system now.
21. After device boot corectly go to apps-> Settings-> Accounts (Tab)-> Backup and reset-> "Factory data reset"-> reset device
22. After ur phone boot corectly go to apps-> Settings-> More(Tab)-> About device-> Software update
23. Get your OTA update
This is for NOOBS guide made by me. If i made some mistakes let me know to correct. I wrote it from my memories of week ago
Press thanks if helped
Click to expand...
Click to collapse
Can i update from 4.1.2 XXELA to 4.3 MJ9 without losing my efs? I am talking for flashing with Odin.
P.S. - Link for M9 BTU is broken (File has reached maximum downloads)
From xxela u not lose efs
but good user always have min 1 backup remember it
ps. I will upload it to other host cuz i have it still cuz sammobile choose sh1t hoster.
Please check the FW Threads before posting it.
Here is the official XXUGMJ9 BTU 4.3 mirror, speed 2-2.5 MB/s enjoy!
https://mega.co.nz/#!r8A3kIqR!Zn7qWQHhDPifp0EQuqZ_UFl61y5_rlKq7-cTK-Oks8k
DONE! It works Thanks!
So welcome in MK6 club
What about in dumped firmware mk6? Do i need to follow the first step again? :what:
one question will the update come via ota or ?
Sent from my GT-I9300 using xda app-developers app
No OTA
HTC-DeSiRe-S-S510e said:
one question will the update come via ota or ?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'm running stock MG4 (BTU) no there is no ota update and no kies update. It just says you already have the latest updates. Is something wrong or will it still come???
Just to share my expirience with this tut...
I tred first to install mk 6 rom from other thread but csc came kor,than followed this quide and somehowe menaged to change csc to btu. After root delete app i stii had custom binary. Tried flashing mk9 but i got some sistem errors and over this i flashed again mk6 so now its ok... its btu
Sent from my GT-I9300 using Tapatalk
vicfirth_23 said:
What about in dumped firmware mk6? Do i need to follow the first step again? :what:
Click to expand...
Click to collapse
Dont flash that "dumped firmware" sh1t. Ppl have issues with their devices cuz of it. Follow my instruction started from 1. Step by step and everything will be fine.
---------- Post added at 08:15 PM ---------- Previous post was at 08:14 PM ----------
HTC-DeSiRe-S-S510e said:
one question will the update come via ota or ?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
if u going to do it by my instruction it will be update by OTA.
---------- Post added at 08:20 PM ---------- Previous post was at 08:15 PM ----------
meehi said:
I'm running stock MG4 (BTU) no there is no ota update and no kies update. It just says you already have the latest updates. Is something wrong or will it still come???
Click to expand...
Click to collapse
U have to install MJ9 manualy by odin. Dont ask me why cuz i dont have time for that stories. U just have to install MJ9 manualy and by OTA update to MK6.
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
uglyjohny said:
I tred first to install mk 6 rom from other thread but csc came kor
Click to expand...
Click to collapse
If u instaled MK6 from other threed, for what u need BTU csc? U got the latest update so u dont need change csc (but u still have strange FW made by hands of some users)
uglyjohny said:
than followed this quide and somehowe menaged to change csc to btu. After root delete app i stii had custom binary.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Cuz u dont read instruction well. When u unrooted device its not mean u cleared everything.
Important is read and think
Look at this again:
17. Download from playstore "Root App Delete" or from pc LINK
18. Instal app from 17 point and open it. Grant root permission, navigate to system apps and find on list app "CWM Menager" with this image icon LINK, uninstall it. Close "Root App Delete" we will not need it anymore.
19. Open SuperSU app, go to settings and press "Full Unroot". It will uninstall SuperSU.
20. Turn off ur phone, press and hold "volume UP"+home buttom+power. Wipe data/factory reset, wipe cache partition, advenced -> wipe dalvik cache. Reboot system now.
21. After device boot corectly go to apps-> Settings-> Accounts (Tab)-> Backup and reset-> "Factory data reset"-> reset device
except TERAFILE SERVER
Does anybody has a download link of I9300XXUGMK6 BTU/OXA on MEGA SERVER or any other except terafile.co as my proxy server does not allow me to download any file fromk terafile.co
Thanks a million!
hey guy need help......i hv Samsung Galaxy Note 4(SM-N910G).....i root my device and it work well...but today i reset my Note 4 factory setting for some reason.....n some how....i wipe my OS of my note 4.....then i install OS......bt after i installation of OS i rooted my mobile again without any problem.... i wipe my setting again n now im unable to root my device dnt know y.........i tried all.........like re-installation of OS.......tried to root again n again........bt it always fail.....help me out...???????:crying::crying::crying::crying::crying::crying::crying:
using SGN4 (SM-N910G)
Not sure how you're going about this, I'll just list the steps I've used.
1/ Flash standard firmware from Sammobile.com using phone's Download mode and Odin.
2/ After the reboot, put phone into Download mode again and flash TWRP Recovery, again with Odin.
3/ After reboot, put phone into Recovery mode, then Install UpdateSuperSU-vx.xx.zip (where x.xx is whatever version you have) from the extSD card.
4/ Reboot and check if SuperSU is in all apps screens, start it and let it update the binaries, then instal TWRP's apk from play store.
5/ Reboot.
Works a treat every time.
nothing happen........n now i'm unable to flash TWRP Recovery......help me out plz.......
I looked at other threads, and they either were really confusing, or weren't pertaining to my phone. Can someone give me a clear answer of how to root my phone?
Phone: AT&T Samsung Galaxy S4
Model Number: SAMGSUNG-SGH-1337
Android Version: 5.0.1 Lollipop
And also, I need a way of removing Knox. But rooting it is the priority!
Thanks in advance.
Okay I Found a Link
I decided to come on today, and saw that DoJCole posted a verified way of rooting the type of phone I have. Link: http://forum.xda-developers.com/galaxy-s4-att/general/root-att-s4-5-0-1-t3165816
Wrathfulweasel said:
I decided to come on today, and saw that DoJCole posted a verified way of rooting the type of phone I have. Link: http://forum.xda-developers.com/galaxy-s4-att/general/root-att-s4-5-0-1-t3165816
Click to expand...
Click to collapse
Don't Use This Method ( Kingroot ) ... Kindly Use This Method [How-To] Update to I337_OC4 - 5.0.1 and KeepRoot @muniz_ri
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Because This Method Only Able To Get Proper Root Access ... I Used Kingroot ->Successfully Rooted --> But Not Able To Install Anything Like [ Custom ROM ] ..So Always Use " Update to I337_OC4 - 5.0.1 and KeepRoot " Metthod .. Without Issues It Will Works :good:
jack_ssl said:
Don't Use This Method ( Kingroot ) ... Kindly Use This Method [How-To] Update to I337_OC4 - 5.0.1 and KeepRoot @muniz_ri
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Because This Method Only Able To Get Proper Root Access ... I Used Kingroot ->Successfully Rooted --> But Not Able To Install Anything Like [ Custom ROM ] ..So Always Use " Update to I337_OC4 - 5.0.1 and KeepRoot " Metthod .. Without Issues It Will Works :good:
Click to expand...
Click to collapse
The thing is, I don't need to update- I need to first root my phone. This update requires an already-rooted phone. Also, I don't need to update my phone.
Thanks for repsonding though!
EDIT: Wait, are you saying that I should first root using Kingroot, and then update to 1337_OC4?
Wrathfulweasel said:
The thing is, I don't need to update- I need to first root my phone. This update requires an already-rooted phone. Also, I don't need to update my phone.
Thanks for repsonding though!
EDIT: Wait, are you saying that I should first root using Kingroot, and then update to 1337_OC4?
Click to expand...
Click to collapse
No , Downgrade I337UCUFNB1_Rootable_Full_Odin : https://www.androidfilehost.com/?fid=23501681358548937
And Download I337_OC4_Stock_Rooted_ROM
https://www.androidfilehost.com/?fid=24052804347800728
If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
https://www.androidfilehost.com/?fid=23681161096070831
Then Install FlashFire ... Give Root Permission
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OC4_Bootloader using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
-_- I don't get it
jack_ssl said:
No , Downgrade I337UCUFNB1_Rootable_Full_Odin : (LINK)
And Download I337_OC4_Stock_Rooted_ROM
(LINK)
If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
(LINK)
Then Install FlashFire ... Give Root Permission
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OC4_Bootloader using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Click to expand...
Click to collapse
:| Did I mention that I'm a noob too? I rooted a phone once before (Samsung Galaxy Mega GT-i9152) and it wasn't this complicated for me... and does this bypass Knox? Thanks for responding to me so fast though.
The thing is, I don't understand what its saying...
EDIT: Okay, I see what's going on now. I can't root directly from 5.0.1- need to downgrade.
http://forum.xda-developers.com/galaxy-s4-att/help/help-rooint-galaxy-s4-5-0-1-t3235410
That link is a thread in which an answerer answered the question with two links. Its a two part process to rooting the 5.0.1 Android.
Ah ha
jack_ssl said:
No , Downgrade I337UCUFNB1_Rootable_Full_Odin : (link)
And Download I337_OC4_Stock_Rooted_ROM
(link)
If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
(link)
Then Install FlashFire ... Give Root Permission
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OC4_Bootloader using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Click to expand...
Click to collapse
I would just like to say I understand it now. Thanks!
Exactly what I was looking for
A bit about this post.
I just want to share the links that was useful to me when I was working on my girlfriends phone. Its an awesome device.
I gathered the links and added some troubleshooting tips that helped me out. I hope it does help you too. Enjoy.
UPDATE 09/21/2017
For firmware, stock images and download needs .
Visit https://desktop.firmware.mobi
It was made by our lord Chainfire.
Stock ROMS for SM-G930W8
Updato Rom Download Collections
Stock Recoveries for Galaxy S7 G930W8 Rogers
Marshmallow 6.0 G930W8VLU2BQB6
Download
Nougat 7.0 G930W8VLU2BQH1
Download
How to extract Recovery from Firmwares
How To Extract Stock Recovery From Samsung Firmware
How to Root Galaxy S7 with Magisk
Click Here for MaxLee Guide or Watch Video Below
Download Root, TWRP, Magisk Kit
Video Link
Troubleshooting on Installing Magisk inside TWRP
Problem: When you can't find the zip files on the internal, external sd or otg.
Symtoms
sd card / otg / internalsd showing as 0 mb or mount error.
you can see folders but not files.
How to fix it
Follow the steps below. WARNING: Wiping DATA will delete your files on your internal storage (emulated sd)
Requirements: Copy Magiskv14 , MagiskManager ,AntirootRemoval inside External SDCARD. Insert in the phone.
Boot to TWRP Recovery (VOLUP+HOME+POWER)
Go to Wipe > Format Data
Press back key, then choose reboot > Recovery
Inside recovery, install the necessary zip files.
How to Restore the Mobile Data and Mobile Hotspot Quick Settings Toggles on Samsung Galaxy Devices
Click here for the full steps
How to Restore to Stock Firmware
Video Link
Tweaks for Battery Life
Disable Wifi Scanning - Settings>Privacy and Safety>Location>Improve Accuracy
https://www.androidcentral.com/fix-battery-life-galaxy-s7
Fix Wifi Lag on S7
Automatic
Set DNS as google using DNS Changer
Manual
Enable Developer mode on your S7 or S7 Edge.
In the new "Developer options" in "Settings" change "Use legacy DHCP client" from OFF to ON.
Anothery Way
Change DNS settings
If the above tips did not work for you, its time to take things to the next level. If the Galaxy S7 is the only device in your Wi-Fi network to suffer from slow speeds, you can try changing the DNS server used on the handset.
For this, you will first have to make the device forget the existing Wi-Fi network. Then, tap on its name to join again, but before you enter the password, tap on ‘Show advanced options.’ Now proceed to tap ‘IP Settings’ and select ‘Static’ from the list. Leave other IP settings as they are, and simply enter the DNS server you’d like to use in the DNS text field area. You can try using Google DNS first (8.8.8.8, 8.8.4.4) or OpenDNS (208.67.222.222) to see if they fix the Wi-Fi woes on your S7 or not.
Important Tools
ADB Installer
Latest Odin
Samsung USB Drivers
Wireless ADB Root - Download
Magisk Thread
Fix Odin Device Info Fail when Restoring (Credits to Original Poster)
Method 1
Open Odin, place all the necessary files into their slots.
Go the the options tab, make sure "Auto Reboot" IS ticked.
Press "start", but as soon as you do, hold down VolumeDown+Home+Power on your phone.
Odin will fail and your phone will reboot into download mode again.
Now press "Start" in Odin again, and your phone should flash without a problem.
This might take a few attempts to get right.
Method 2 (Another Variation)
Download the stock for your phone.
Boot into download mode by pressing ( power + volume down + home button) and stop at the screen of continue and reboot.
Press volume down to restart phone
Quickly boot back into download mode by pressing (power + volume down + home button)
Press continue
Install firmware with Odin
Wait for the firmware to be installed
Ready.
How I Rooted my G930W8
Don't skip any of the step.
First clean install the latest Nougat 7.0 G930W8VLU2BQH1 - Guide
Download the MagiskFilesRoot, unzip it in the sdcard, slide it inside your phone
Boot up S7 then setup the normal way
Enable Developer Options - System > About Phone > Build Number > Tap 7 Times, press back.
Select Developer Options then Turn on ADB Debugging & OEM Unlock
Disable the Samsung Factory Reset Protection if you have it enabled
Put phone in download mode
Download TWRP using this twrp-3.1.1-0-herolte.img.tar
Open Odin, uncheck AutoReboot, check AP point to the TWRP we just downloaded. Hit Start
Once its finished, do Recovery Combo (Power + VolumeUp + HomeButton)
It will reboot in TWRP Recovery, flash MagiskV14.zip, if you have problem seeing files wipe DATA and then reboot to recovery again using TWRP, select SDCARD as storage then flash MagiskV14.zip
Reboot the phone, wait 10-15 minutes then install MagiskManager.apk
Optional - Open Magisk Manager, select SuperUser then open Download. Install Busybox by 0sm0sis.
You are now running systemless root
Refer to MaxLee Video on Rooting S7 with Magisk - Guide
Did you manage to root the G930W8 on nougat 7.0 build with this method? I've had nothing but problems attempting to root for the last few days. Tried cf-auto root and this magisk method early on in my attempts with no success. I've just fine a full clean build flash and restore and would really like to root but am worried I'm just going to get no where again and spend hours getting back to where I'm at now...
v2kai said:
Did you manage to root the G930W8 on nougat 7.0 build with this method? I've had nothing but problems attempting to root for the last few days. Tried cf-auto root and this magisk method early on in my attempts with no success. I've just fine a full clean build flash and restore and would really like to root but am worried I'm just going to get no where again and spend hours getting back to where I'm at now...
Click to expand...
Click to collapse
Yes. Refer to second post. I'm now running the latest nougat with magiskv14 systemless root. Its better that way, I can still use snapchat and banking applications.
What was the problem you are having?
Xygote said:
Yes. Refer to second post. I'm now running the latest nougat with magiskv14 systemless root. Its better that way, I can still use snapchat and banking applications.
What was the problem you are having?
Click to expand...
Click to collapse
Having trouble as well.
I get message "integrity check failed" after flashing magisk via twrp a step 11 then makes me reset the phone but because of the custom recovery it only bootloops.
Then i restart the whole process again only to stop at step 11.
Is there a step i'm missing?
Start all over again, but on step 11 follow this.
Try it this way:
When you boot up to TWRP, swipe allow modification. Flash MagiskV14.zip, then if it says install TWRP app, press "do not install".
If you have problem seeing files wipe DATA and then reboot to recovery again using TWRP, select SDCARD as storage then flash MagiskV14.zip
I tried it but i accidentally let the phone reboot after flashing twrp and it failed the integrity check and started bootlooping. I entered recovery and grabbed the log which i attached here.
So I did the steps again but used this steps from the other guide for exynos models
At this point, you will reach the screen asking you if you want to allow system modifications.
By swiping right, you will trigger dm-verity, and if you don't follow the next step you will be unable to boot!
If you are going to root your device and follow the rest of these steps, then it is safe to swipe right and enable modifications.
If you want to use Systemless DevBase, then do not swipe. Keep it as read only.
Go to Wipe and click on format data. Type "yes" and it will format.
Now go back to home and click on "Reboot" then click on "Recovery" Option.
Then went from step 11 here and what you said to flash magisk and it worked.
My phone is finally debloated.
I tried your steps many times but everytime it's failing. Everytime it fails when installing "system". I've tried with different CSC version firmwares but it failed with each one of them. I', 100% sure that it is G930W8 S7 Flat because it was running on the same version of custom ROMs.
cy56 said:
I tried your steps many times but everytime it's failing. Everytime it fails when installing "system". I've tried with different CSC version firmwares but it failed with each one of them. I', 100% sure that it is G930W8 S7 Flat because it was running on the same version of custom ROMs.
Click to expand...
Click to collapse
Same here... I tried it on two different stock roms with no luck.
I almost soft bricked my s7 which was working perfectly before applying the patch. It was giving me dm-verity error at boot...
I was able to flash it back and make it working using full stock rom.
I highly recommend readers to NOT apply the above Magisk Root on their G930W8 (S7).
DeCoDish
sorry if this is in the wrong section i have galaxy s7 its on android 7.0 my power button is broken doesnt work at all i normally dont let my phone power down completley cause of it and it has ive tried rebooting the phone usin volume down and then plugging into computer and it just brings up the charge screen is there any other ways i can get this phone powered on even if i have to download something on my computer i will pleaqse help if possible
Have you tried these suggestions?
https://www.addictivetips.com/android/turn-on-an-android-phone-with-a-broken-power-button/
I just want to confirm this, since it's not explicitly mentioned in the post... When you root it trips KNOX, which locks you out from Disconnect Pro, Samsung Health, and Samsung Pay. Does this also mean that Android pay will not work either? Or does this method allow for Android pay to work?
If not, is there a workaround yet?
Scraggarax said:
I just want to confirm this, since it's not explicitly mentioned in the post... When you root it trips KNOX, which locks you out from Disconnect Pro, Samsung Health, and Samsung Pay. Does this also mean that Android pay will not work either? Or does this method allow for Android pay to work?
If not, is there a workaround yet?
Click to expand...
Click to collapse
There are many reports on the XDA forums that Android Pay works with Magisk systemless root and with tripped Knox on S7 (as opposed to Samsung Pay which will not work once Knox is tripped).
Xygote said:
A bit about this post.
I just want to share the links that was useful to me when I was working on my girlfriends phone. Its an awesome device.
I gathered the links and added some troubleshooting tips that helped me out. I hope it does help you too. Enjoy.
UPDATE 09/21/2017
For firmware, stock images and download needs .
Visit https://desktop.firmware.mobi
It was made by our lord Chainfire.
Stock ROMS for SM-G930W8
Updato Rom Download Collections
Stock Recoveries for Galaxy S7 G930W8 Rogers
Marshmallow 6.0 G930W8VLU2BQB6
Download
Nougat 7.0 G930W8VLU2BQH1
Download
How to extract Recovery from Firmwares
How To Extract Stock Recovery From Samsung Firmware
How to Root Galaxy S7 with Magisk
Click Here for MaxLee Guide or Watch Video Below
Download Root, TWRP, Magisk Kit
Video Link
Troubleshooting on Installing Magisk inside TWRP
Problem: When you can't find the zip files on the internal, external sd or otg.
Symtoms
sd card / otg / internalsd showing as 0 mb or mount error.
you can see folders but not files.
How to fix it
Follow the steps below. WARNING: Wiping DATA will delete your files on your internal storage (emulated sd)
Requirements: Copy Magiskv14 , MagiskManager ,AntirootRemoval inside External SDCARD. Insert in the phone.
Boot to TWRP Recovery (VOLUP+HOME+POWER)
Go to Wipe > Format Data
Press back key, then choose reboot > Recovery
Inside recovery, install the necessary zip files.
How to Restore the Mobile Data and Mobile Hotspot Quick Settings Toggles on Samsung Galaxy Devices
Click here for the full steps
How to Restore to Stock Firmware
Video Link
Tweaks for Battery Life
Disable Wifi Scanning - Settings>Privacy and Safety>Location>Improve Accuracy
https://www.androidcentral.com/fix-battery-life-galaxy-s7
Fix Wifi Lag on S7
Automatic
Set DNS as google using DNS Changer
Manual
Enable Developer mode on your S7 or S7 Edge.
In the new "Developer options" in "Settings" change "Use legacy DHCP client" from OFF to ON.
Anothery Way
Change DNS settings
If the above tips did not work for you, its time to take things to the next level. If the Galaxy S7 is the only device in your Wi-Fi network to suffer from slow speeds, you can try changing the DNS server used on the handset.
For this, you will first have to make the device forget the existing Wi-Fi network. Then, tap on its name to join again, but before you enter the password, tap on ‘Show advanced options.’ Now proceed to tap ‘IP Settings’ and select ‘Static’ from the list. Leave other IP settings as they are, and simply enter the DNS server you’d like to use in the DNS text field area. You can try using Google DNS first (8.8.8.8, 8.8.4.4) or OpenDNS (208.67.222.222) to see if they fix the Wi-Fi woes on your S7 or not.
Important Tools
ADB Installer
Latest Odin
Samsung USB Drivers
Wireless ADB Root - Download
Magisk Thread
Fix Odin Device Info Fail when Restoring (Credits to Original Poster)
Method 1
Open Odin, place all the necessary files into their slots.
Go the the options tab, make sure "Auto Reboot" IS ticked.
Press "start", but as soon as you do, hold down VolumeDown+Home+Power on your phone.
Odin will fail and your phone will reboot into download mode again.
Now press "Start" in Odin again, and your phone should flash without a problem.
This might take a few attempts to get right.
Method 2 (Another Variation)
Download the stock for your phone.
Boot into download mode by pressing ( power + volume down + home button) and stop at the screen of continue and reboot.
Press volume down to restart phone
Quickly boot back into download mode by pressing (power + volume down + home button)
Press continue
Install firmware with Odin
Wait for the firmware to be installed
Ready.
Click to expand...
Click to collapse
I followed these directions exactly but when I boot into TWRP and attempt to install the Magisk.zip I recieve the following errors stating "could not mount /data partition" then causing the phone to bootloop until I flash the stock firmware again.
Why is this happening?
benberger88 said:
So I did the steps again but used this steps from the other guide for exynos models
At this point, you will reach the screen asking you if you want to allow system modifications.
By swiping right, you will trigger dm-verity, and if you don't follow the next step you will be unable to boot!
If you are going to root your device and follow the rest of these steps, then it is safe to swipe right and enable modifications.
If you want to use Systemless DevBase, then do not swipe. Keep it as read only.
Go to Wipe and click on format data. Type "yes" and it will format.
Now go back to home and click on "Reboot" then click on "Recovery" Option.
Then went from step 11 here and what you said to flash magisk and it worked.
My phone is finally debloated.
Click to expand...
Click to collapse
can you clarify(link to) what combination of steps you used to achieve a successful root? I havent attempted again since my last attempt but it sounds like you had some success. If you'd share it'd be really helpful and appreciated. Would really like to get root back on my phone
also just to clarify, I'm on nougat 7.0 with security patch Nov 1, 2017
Thanks
Avengement said:
I followed these directions exactly but when I boot into TWRP and attempt to install the Magisk.zip I recieve the following errors stating "could not mount /data partition" then causing the phone to bootloop until I flash the stock firmware again.
Why is this happening?
Click to expand...
Click to collapse
If its first time TWRP installation then you need to Format data (Caution: Format data will format the Phone internal storage and you need to backup files first if you have in phone storage like photos video and etc) After formatting data it Will allow to read and write the data partition). Further once you Flash TWRP then Super SU or Magist (Root) is compulsory to boot normal unless its bootloop
Any of you recommend holding off on the root till the Oreo update? Also, does rooting change the kernel to a different one? I wanna avoid battery/performance issues if I can by staying on the stock kernel.
MirzaAwais said:
If its first time TWRP installation then you need to Format data (Caution: Format data will format the Phone internal storage and you need to backup files first if you have in phone storage like photos video and etc) After formatting data it Will allow to read and write the data partition). Further once you Flash TWRP then Super SU or Magist (Root) is compulsory to boot normal unless its bootloop
Click to expand...
Click to collapse
How do you format the drive? What type of file system do you format it to? At what point in this tutorial is this done?
hi
can someone confirm a procedure for rooting s7 on exynos cpu
would be more than appreciated
thanks
nate
Im not New to rooting phones Iam new to rooting Samsung phones and Odin Software.
some specs of SM-S737TL:
Carrier: WMFM
OS: Android 7.0
Model #: SM-S737TL
Device Name: Galaxy J7 Sky Pro
CPU: Exynos Octa 7870
Architecture: 8x Arm cortex-A53 @ 1.59 GHz
Board: Universal7870
Ram: 2G but actually is 1.85G "but who's counting right!?"
Internal Storage: 16G
Security KNOX
few things about this phone:
-In developer options there is NO option for OEM UNLOCK "My first phone without that option"
-FRP LOCK is ENABLED
-In this phone's recovery the top line reads "samsung/j7popeltetfntmo/j7popeltetfntmo7.0/NRD90M/S737TLUDU1AQF2 user/release-keys" My issue here is "TMO" Im guessing that that means T-Mobile???
-I feel like the Internal Storage was Auto Encrypted without asking the user and without an option to encrypt internal storage. The only option for Encryption is individual file encryption. I say this because battery life is horrible I have seen this on other phones that have encryption enabled. Or is it KNOX doing the battery drain?
-Odin download mode with VOL Dwn+Home Key+PWR
The Sky Pro is recognized by Odin with the Samsung USB Drivers
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Cf Autoroot supersu files
https://autoroot.chainfire.eu/
Odin Versions 1.3 to version 3.10.7 All in one
https://www.droid-developers.com/samsung-odin-downloader/
Odin Latest versions "3.12.10"
https://forum.xda-developers.com/showthread.php?t=2711451
Questions:
1. Is the Samsung J7 Sky Pro just a Rebranded
Samsung galaxy Wide
Samsung Galaxy Prime
2. Could we use a root method from a similar rebranded phone?
3. Could we use a SuperSU from the rebranded or Super similar phone? "i kinda know the answer but I ask anyway"
4. Could we just flash the latest SuperSU using CF auto-root w/Odin or Just typical ADB commands and gain root like that?
5. Notice the line at the recovery of this phone it says "j7popeltetfntmo" TMO usually means T-Mobile. So whats up with that???
6. Odin Mode easy to get to Rumor is Tracfone Doesnt lock bootloaders Does this mean the Sky Pro Tracfone Varient has a Unlocked bootloader out of box? I assume yes because we can get to bootloader, Odin Mode, and Recovery without hax/mods
Model Versions of Sky Pro
Family Mobile SM-S737TL
Straight Talk SM-S727VL
Total Wireless S727VL4G LTE
Tracfone SM-J727V (cdma)
I'm waiting on that too I bought two on black Friday to send to relatives in Mexico and so far no root no unlocking, waiting on Odin or that other root software to get er done
Sent from my HTC One M9 using XDA Free mobile app
this is op. Look for crom sevice on xda download install. I believed it oem unlucked my phone. Check it out guys. Get back to me let me know what you think. now if we have oem unlock we just need stock rom.
With this phone the way to root it would be Reset to factory then not letting the phone to load and run stock install WE HAVE TO AVOID ENCRYPTION WHICH THIS PHONE FORCES! SO WE FACTORY RESET AND GO IMMEDIETLY TO BOOTLOADER
Oh I should tell you I installed crom service but the phone didnt reset and apply update immedietly it was like 1 or 2 days later. I just left it installed figured if it didnt do anything right then it doesnt work. I Got distracted with a phone call and forgot to uninstall crom. Thats the story I want root for my phone
Com service
hotboi21 said:
Com service
Click to expand...
Click to collapse
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Odin 3
https://devfiles.co/download/mhjr5aI8/Odin3_v3.13.1.zip
Recovery TWRP 3.1.1.0
https://www.androidfilehost.com/?fid=889764386195925101
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
https://www.androidfilehost.com/?fid=673956719939815322
hacker812c said:
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Odin 3
https://devfiles.co/download/mhjr5aI8/Odin3_v3.13.1.zip
Recovery TWRP 3.1.1.0
https://www.androidfilehost.com/?fid=889764386195925101
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
https://www.androidfilehost.com/?fid=673956719939815322
Click to expand...
Click to collapse
Well done, wasnt sure if i could say anything yet. pointed in the Crom direction on another thread. I need to read all the rules. I am new at this but love it.
@whitebeardedtrimmer
Thanks for reply your status
I m happy
Ok. Before I even say anything, I have no idea what half of the things that are said on here means. All I want is to be able to use my phone as a mobile hotspot/tethering. But that setting is not on this phone. I have the j727vl. I downloaded a app that lets me access the setting but it's blank. Does that make sense? Anyways. I Googled ?how I could possible get my phone to let me do that, and i cane across rooting it. I've tries kingroot and one other thing (forgot what it's called ?) so please if someone can explain what to do (in a language I can understand) id be forever grateful. I just want to be able to watch Netflix again ??
crystalking1 said:
Ok. Before I even say anything, I have no idea what half of the things that are said on here means. All I want is to be able to use my phone as a mobile hotspot/tethering. But that setting is not on this phone. I have the j727vl. I downloaded a app that lets me access the setting but it's blank. Does that make sense? Anyways. I Googled ?how I could possible get my phone to let me do that, and i cane across rooting it. I've tries kingroot and one other thing (forgot what it's called ?) so please if someone can explain what to do (in a language I can understand) id be forever grateful. I just want to be able to watch Netflix again ??
Click to expand...
Click to collapse
You don't need an app to be able to use your phone as a hotspot
All you have to do is go to connections and then Mobile Hotspot and tethering
amdsam95 said:
You don't need an app to be able to use your phone as a hotspot
All you have to do is go to connections and then Mobile Hotspot and tethering
Click to expand...
Click to collapse
I cant. That is not even an option on this phone, or atleast not the one I have. I have read that the carrier may have that setting blocked.
illiam1 said:
Im not New to rooting phones Iam new to rooting Samsung phones and Odin Software.
some specs of SM-S737TL:
Carrier: WMFM
OS: Android 7.0
Model #: SM-S737TL
Device Name: Galaxy J7 Sky Pro
CPU: Exynos Octa 7870
Architecture: 8x Arm cortex-A53 @ 1.59 GHz
Board: Universal7870
Ram: 2G but actually is 1.85G "but who's counting right!?"
Internal Storage: 16G
Security KNOX
few things about this phone:
-In developer options there is NO option for OEM UNLOCK "My first phone without that option"
-FRP LOCK is ENABLED
-In this phone's recovery the top line reads "samsung/j7popeltetfntmo/j7popeltetfntmo7.0/NRD90M/S737TLUDU1AQF2 user/release-keys" My issue here is "TMO" Im guessing that that means T-Mobile???
-I feel like the Internal Storage was Auto Encrypted without asking the user and without an option to encrypt internal storage. The only option for Encryption is individual file encryption. I say this because battery life is horrible I have seen this on other phones that have encryption enabled. Or is it KNOX doing the battery drain?
-Odin download mode with VOL Dwn+Home Key+PWR
The Sky Pro is recognized by Odin with the Samsung USB Drivers
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Cf Autoroot supersu files
https://autoroot.chainfire.eu/
Odin Versions 1.3 to version 3.10.7 All in one
https://www.droid-developers.com/samsung-odin-downloader/
Odin Latest versions "3.12.10"
https://forum.xda-developers.com/showthread.php?t=2711451
Questions:
1. Is the Samsung J7 Sky Pro just a Rebranded
Samsung galaxy Wide
Samsung Galaxy Prime
2. Could we use a root method from a similar rebranded phone?
3. Could we use a SuperSU from the rebranded or Super similar phone? "i kinda know the answer but I ask anyway"
4. Could we just flash the latest SuperSU using CF auto-root w/Odin or Just typical ADB commands and gain root like that?
5. Notice the line at the recovery of this phone it says "j7popeltetfntmo" TMO usually means T-Mobile. So whats up with that???
6. Odin Mode easy to get to Rumor is Tracfone Doesnt lock bootloaders Does this mean the Sky Pro Tracfone Varient has a Unlocked bootloader out of box? I assume yes because we can get to bootloader, Odin Mode, and Recovery without hax/mods
Model Versions of Sky Pro
Family Mobile SM-S737TL
Straight Talk SM-S727VL
Total Wireless S727VL4G LTE
Tracfone SM-J727V (cdma)
Click to expand...
Click to collapse
Here is the SM-S737TL stock firmware I am not sure if I can post links. But will try both normal and one with a space.
https://mega.nz/#!mPJ2ULBL!WL62OzZynfPSviSQPDRihJl7WQBXlG3xUwYUy7CdUi8
https :// mega.nz /#!mPJ2ULBL!WL62OzZynfPSviSQPDRihJl7WQBXlG3xUwYUy7CdUi8
Remove spaces Link should be good.
Here is SM-S737TL stock firmware. It contains the 5 files listed below.
AP_S737TLUDU1AQF2_CL11476814_QB13814489_REV01_user_low_ship_meta.tar.md5
BL_S737TLUDU1AQF2_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
CP_S737TLUDU1AQF2_CP6659865_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
CSC_TFN_S737TLTFN1AQF2_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
HOME_CSC_TFN_S737TLTFN1AQF2_CL11476814_QB13814489_REV01_user_low_ship.tar.md5
SM-S737TL COMBINATION File
Here is the combination file for the SM-S737TL.
COMBINATION_TFN_FA70_S737TLUDU1AQD2.7zr contains COMBINATION_TFN_FA70_S737TLUDU1AQD2_TFNFAC_CL11263326_QB13338441_REV01_user_mid_noship.tar.md5
Link with spaces.
https :// mega.nz /#!jKhE2arK!M0kxFVJjG7zjNJ3h66qb5y7WxJW-jH521BnuweyTThw
I tried the root method but odin alway fails and in the phone says security check failed
reggiet1 said:
Here is the combination file for the SM-S737TL.
COMBINATION_TFN_FA70_S737TLUDU1AQD2.7zr contains COMBINATION_TFN_FA70_S737TLUDU1AQD2_TFNFAC_CL11263326_QB13338441_REV01_user_mid_noship.tar.md5
Link with spaces.
https :// mega.nz /#!jKhE2arK!M0kxFVJjG7zjNJ3h66qb5y7WxJW-jH521BnuweyTThw
Click to expand...
Click to collapse
sir where is the link for combination
hacker812c said:
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
Odin 3
Recovery TWRP 3.1.1.0
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
Click to expand...
Click to collapse
So this method works for this mobile?
my model is Samsung sm-s727vl
which is from StraightTalk
Does this also sim unlocks the phone?
I don't really want to try this without someone saying this method worked.
Anything so Far?
Anything so Far? I tried to root my phone but when following instructions but I can't flash anything. I tried going in control panel, update drivers etc. but no luck. Help me and if anyone has successfully rooted the SM-S737TL then let me know how you did it. Thanks in advance. Will the other versions work with SM-S737TL? (eg. SM-J727V OR SM-S737VL)
Root didn't work for sm-s737tl
I love this Walmart family mobile phone but would like to root it. I bought the same phone for my mom because it's a great phone for the price. I tried the root as outlined but the result was FAIL! ODIN found the phone and connected but the end result was Complete (Write) operation failed and the download screen said something about a security check failing.
I'm assuming I'm missing an OEM unlock but don't see it in developer options menu.
My baseband version is s737tlud1aqf2
I really want to root this phone!
Hlp I have no computer can I root it ?????
I have no computer but I'm working on borrowing one I really hope this works I've been waiting on this for a long time thank you in advance:fingers-crossed:
hacker812c said:
My friends around the world
@hotboi21 @illiam1 and @regio81
i searched and analise the root for j727 j737 variants
i found this test method and share
*** remember ***
Install this at your own risk
I am not responsible for any damage to your device
*** steps ***
1. Download your official rom if root fail
2. Download odin and samsung drivers
3. Download TWRP and SuperSu 2.82 this release disable knox and security i tested
****3.1 (ExternalSD) Copy SuperSu 2.82 to ExternalSD i recomend
****3.2 InternalSD is formated with factory reset and if you restart mobile this encrypt your SD ok
4. Enable developer options in your phone and select USB debugging
5. Enter in stock recovery and start factory reset in your mobile [remove encrypt] Remember this reset is required
6. Reboot directly in download mode at this point
7. Open Odin and unselect AutoReboot
8. Flash TWRP after flash reboot mobile - press power + vol down
9. imediatly after enter recovery TWRP to flash SuperSu
10. Flash Supersu and Reboot with Root
11. if your root fail flash your official ROM
12. if your root is perfect press Thanks i am happy
*** files ***
Samsung drivers
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Odin 3
https://devfiles.co/download/mhjr5aI8/Odin3_v3.13.1.zip
Recovery TWRP 3.1.1.0
https://www.androidfilehost.com/?fid=889764386195925101
SuperSu 2.82 Tested on Android 7.0 and Galaxy j7 PRO April 2018
https://www.androidfilehost.com/?fid=673956719939815322
Click to expand...
Click to collapse
It doesn't work on this device:
Samsung Galaxy J7 Prime
Model: SM-J727T
Baseband version: J727TUVU3BRH3
I get to step
8. Flash TWRP after flash reboot mobile - press power + vol down
Click to expand...
Click to collapse
and flash with odin fails and "SECURE CHECK FAIL (RECOVERY)" is displayed in the upper left hand corner of the screen. Just FYI for others trying to flash same model phone as me.