1- flash MJ9_BTU UK
2- root with CF_AUTOROOT
3- download CSC Changer from ply store and change CSC on BTU
4- download & use triangleaway for counter reset
5-flash MJ9 again
6-boot in to recovry wipe data/fact_reset, wipe cashe & dalvike
reboot and on wifi check update you will get MK6 OTA
(hagi-naser)
This has been posted so many times that I have lost count.
Sent from my GT-I9300 using Tapatalk
Steps #5 & 6 can be skipped and replaced by the following steps:
*remove the root via SuperSU app
*do factory reset in settings/accounts/backup & reset.
Sent from my GT-I9300 using xda app-developers app
any chance to root without using pc?
Sent from my GT-I9300 using xda premium
CWM
[tapatalk]dki[/tapatalk]
But I also need pc to install cwm... stock recovery cant flash .zip recovery right?
Sent from my GT-I9300 using xda premium
Before u start make backups of ur files /EFS , /myown**** and any /others if u need them. REMEMBER u doing this on ur own risk.
What do u need:
1. Win rar LINK
2. USB drivers for our device LINK
3. Odin LINK
4. Official firmware LINK
5. Cf-auto-root LINK
6. SuperSU flashable zip file LINK
7. LATER download "csc changer" LINK and app root uninstaller LINK.
What to do:
1. Install win rar on ur computer.
2. Unpack USB drivers and install.
3. Unpack official firmware once (ONLY ONCE!).
4. Put your phone to download mode (Turn off him, press and hold "volume DOWN"+Home buttom+power and hold untill ur screen look like that LINK
Next press "volume up" to confirm. Then ur screen should be like this LINK
5. Connect your device to pc by USB cable. REMEMBER! Always use usb port from back panel of ur pc. NEVER use usb from keyboard, hubs or front usb panel. They can not hold power and conection will be lost (which can make huge problem for u and ur device).
6. Flash official firmware by Odin.
7. When ur device will restart and boot corectly put on ur storage cf-auto-root zip file (DO NOT UNPACK IT!).
8. Turn off ur phone, press and hold "volume UP"+home buttom+power. Screen should look like this LINK
There u can navigate up and down by volume buttoms and accept by short pressing power buttom.
9. Navigate to "install zip from SD card", navigate to cf-auto-root ziped file and press accept by power buttom. Now you should see many of: NO NO NO YES NO NO NO
Navigate to YES and accept. Some letters will apear and when it done press "reboot system now"
10. When your phone boot corectly put on your storage SuperSU flashable zip file (DO NOT UNPACK IT) and delete cf-auto-root zip file
11. Turn off ur phone, press and hold "volume UP"+home buttom+power.
12. Navigate to "install zip from SD card", navigate to SuperSU flashable zip file and install it by the same way as cf root. When done press "reboot system now".
13. When phone boot corectly go to Supersu app and open it, and look is it work fine. You can download root checker from here LINK Open it, press "verify root access". If SuperSU appear, grant root permission for app and you should see LINK.
14. Go to "playstore" use search and find "Samsung Galaxy S / S2 / S3 CSC". Big S letter on image
Here is google play by PC LINK
15. Install and open this app. Ofc grant root permission for app when ask for it. Press "change csc" and on list use "BTU".
16. Reboot device.
17. Download from playstore "Root App Delete" or from pc LINK
18. Instal app from 17 point and open it. Grant root permission, navigate to system apps and find on list app "CWM Menager" with this image icon LINK, uninstall it. Close "Root App Delete" we will not need it anymore.
19. Open SuperSU app, go to settings and press "Full Unroot". It will uninstall SuperSU.
20. Turn off ur phone, press and hold "volume UP"+home buttom+power. Wipe data/factory reset, wipe cache partition, advenced -> wipe dalvik cache. Reboot system now.
21. After device boot corectly go to apps-> Settings-> Accounts (Tab)-> Backup and reset-> "Factory data reset"-> reset device
22. After ur phone boot corectly go to apps-> Settings-> More(Tab)-> About device-> Software update
23. Get your OTA update
This is for NOOBS guide made by me. If i made some mistakes let me know to correct. I wrote it from my memories of week ago
Press thanks if helped
----
12.12.13 - fixed link to FW
----
maqikpl said:
Before u start make backups of ur files /EFS , /myown**** and any /others if u need them. REMEMBER u doing this on ur own risk.
What do u need:
1. Win rar LINK
2. USB drivers for our device LINK
3. Odin LINK
4. Official firmware LINK
5. Cf-auto-root LINK
6. SuperSU flashable zip file LINK
7. LATER download "csc changer" LINK and app root uninstaller LINK.
What to do:
1. Install win rar on ur computer.
2. Unpack USB drivers and install.
3. Unpack official firmware once (ONLY ONCE!).
4. Put your phone to download mode (Turn off him, press and hold "volume DOWN"+Home buttom+power and hold untill ur screen look like that LINK
Next press "volume up" to confirm. Then ur screen should be like this LINK
5. Connect your device to pc by USB cable. REMEMBER! Always use usb port from back panel of ur pc. NEVER use usb from keyboard, hubs or front usb panel. They can not hold power and conection will be lost (which can make huge problem for u and ur device).
6. Flash official firmware by Odin.
7. When ur device will restart and boot corectly put on ur storage cf-auto-root zip file (DO NOT UNPACK IT!).
8. Turn off ur phone, press and hold "volume UP"+home buttom+power. Screen should look like this LINK
There u can navigate up and down by volume buttoms and accept by short pressing power buttom.
9. Navigate to "install zip from SD card", navigate to cf-auto-root ziped file and press accept by power buttom. Now you should see many of: NO NO NO YES NO NO NO
Navigate to YES and accept. Some letters will apear and when it done press "reboot system now"
10. When your phone boot corectly put on your storage SuperSU flashable zip file (DO NOT UNPACK IT) and delete cf-auto-root zip file
11. Turn off ur phone, press and hold "volume UP"+home buttom+power.
12. Navigate to "install zip from SD card", navigate to SuperSU flashable zip file and install it by the same way as cf root. When done press "reboot system now".
13. When phone boot corectly go to Supersu app and open it, and look is it work fine. You can download root checker from here LINK Open it, press "verify root access". If SuperSU appear, grant root permission for app and you should see LINK.
14. Go to "playstore" use search and find "Samsung Galaxy S / S2 / S3 CSC". Big S letter on image
Here is google play by PC LINK
15. Install and open this app. Ofc grant root permission for app when ask for it. Press "change csc" and on list use "BTU".
16. Reboot device.
17. Download from playstore "Root App Delete" or from pc LINK
18. Instal app from 17 point and open it. Grant root permission, navigate to system apps and find on list app "CWM Menager" with this image icon LINK, uninstall it. Close "Root App Delete" we will not need it anymore.
19. Open SuperSU app, go to settings and press "Full Unroot". It will uninstall SuperSU.
20. Turn off ur phone, press and hold "volume UP"+home buttom+power. Wipe data/factory reset, wipe cache partition, advenced -> wipe dalvik cache. Reboot system now.
21. After device boot corectly go to apps-> Settings-> Accounts (Tab)-> Backup and reset-> "Factory data reset"-> reset device
22. After ur phone boot corectly go to apps-> Settings-> More(Tab)-> About device-> Software update
23. Get your OTA update
This is for NOOBS guide made by me. If i made some mistakes let me know to correct. I wrote it from my memories of week ago
Press thanks if helped
Click to expand...
Click to collapse
Can i update from 4.1.2 XXELA to 4.3 MJ9 without losing my efs? I am talking for flashing with Odin.
P.S. - Link for M9 BTU is broken (File has reached maximum downloads)
From xxela u not lose efs
but good user always have min 1 backup remember it
ps. I will upload it to other host cuz i have it still cuz sammobile choose sh1t hoster.
Please check the FW Threads before posting it.
Here is the official XXUGMJ9 BTU 4.3 mirror, speed 2-2.5 MB/s enjoy!
https://mega.co.nz/#!r8A3kIqR!Zn7qWQHhDPifp0EQuqZ_UFl61y5_rlKq7-cTK-Oks8k
DONE! It works Thanks!
So welcome in MK6 club
What about in dumped firmware mk6? Do i need to follow the first step again? :what:
one question will the update come via ota or ?
Sent from my GT-I9300 using xda app-developers app
No OTA
HTC-DeSiRe-S-S510e said:
one question will the update come via ota or ?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'm running stock MG4 (BTU) no there is no ota update and no kies update. It just says you already have the latest updates. Is something wrong or will it still come???
Just to share my expirience with this tut...
I tred first to install mk 6 rom from other thread but csc came kor,than followed this quide and somehowe menaged to change csc to btu. After root delete app i stii had custom binary. Tried flashing mk9 but i got some sistem errors and over this i flashed again mk6 so now its ok... its btu
Sent from my GT-I9300 using Tapatalk
vicfirth_23 said:
What about in dumped firmware mk6? Do i need to follow the first step again? :what:
Click to expand...
Click to collapse
Dont flash that "dumped firmware" sh1t. Ppl have issues with their devices cuz of it. Follow my instruction started from 1. Step by step and everything will be fine.
---------- Post added at 08:15 PM ---------- Previous post was at 08:14 PM ----------
HTC-DeSiRe-S-S510e said:
one question will the update come via ota or ?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
if u going to do it by my instruction it will be update by OTA.
---------- Post added at 08:20 PM ---------- Previous post was at 08:15 PM ----------
meehi said:
I'm running stock MG4 (BTU) no there is no ota update and no kies update. It just says you already have the latest updates. Is something wrong or will it still come???
Click to expand...
Click to collapse
U have to install MJ9 manualy by odin. Dont ask me why cuz i dont have time for that stories. U just have to install MJ9 manualy and by OTA update to MK6.
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
uglyjohny said:
I tred first to install mk 6 rom from other thread but csc came kor
Click to expand...
Click to collapse
If u instaled MK6 from other threed, for what u need BTU csc? U got the latest update so u dont need change csc (but u still have strange FW made by hands of some users)
uglyjohny said:
than followed this quide and somehowe menaged to change csc to btu. After root delete app i stii had custom binary.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Cuz u dont read instruction well. When u unrooted device its not mean u cleared everything.
Important is read and think
Look at this again:
17. Download from playstore "Root App Delete" or from pc LINK
18. Instal app from 17 point and open it. Grant root permission, navigate to system apps and find on list app "CWM Menager" with this image icon LINK, uninstall it. Close "Root App Delete" we will not need it anymore.
19. Open SuperSU app, go to settings and press "Full Unroot". It will uninstall SuperSU.
20. Turn off ur phone, press and hold "volume UP"+home buttom+power. Wipe data/factory reset, wipe cache partition, advenced -> wipe dalvik cache. Reboot system now.
21. After device boot corectly go to apps-> Settings-> Accounts (Tab)-> Backup and reset-> "Factory data reset"-> reset device
except TERAFILE SERVER
Does anybody has a download link of I9300XXUGMK6 BTU/OXA on MEGA SERVER or any other except terafile.co as my proxy server does not allow me to download any file fromk terafile.co
Thanks a million!
Related
do step by step these Instructions for flashing any ROM on GT-P1000 :
1- first you must install Samsung USB drivers from attachment
2- then you must root your device
you can root p1000 2.3.X with DoomLord V4
download Doomlord then extract into your pc
set your device in USB debugging mode then connect via usb cable into pc
go to folder and run as administrator mode "runme.bat" file
press any key and waiting until your device restarts
if you see "SuperUser" icon in apps root be successful
3- galaxy tab p1000 is an old android device so you cannot flash cwm recovery with "Rom Manager"
you must flash recovery with odin
download Odin 3 v1.7
download recovery file "http://www.mediafire.com/?q8s0wnj1s6109gc"
open odin and unchecked "Re-partion" *** if u check this maybe brick your device!!
http://forum.xda-developers.com/attachment.php?attachmentid=2230439&stc=1&d=1378154387
click on PDA and open recovery file that you download
turn off your device
then hold volume- with power button , go to downloading mode
connect tablet via usb to pc , waiting for installing drivers
goto odin if you see yellow COM text its ok ,,
click on START button and waiting until restarting your device
now recovery cwm is installed
4- download your favorites rom and copy it into your sd card folder
5- turn off the device and hold volume+ with power button for 10-15 sec
up = volume +
down = volume -
select = power
Make a Nandroid backup before you install the new ROM.
go to wipe cash and do it
go to factory reset and do it
go to advanced and wipe calvik and wipe battery stat
then go back and select install zip from sd card
select your ROM file and tap power button , wait for installing rom
after you see Successful text you can reboot device and Enjoy from your new ROM
if you see this error : install aborted (status 7)
go to mount and storage then unmount "/system"
then format "/system" and "/data"
try again and it will be ok !!
View attachment Odin3_v1.7.rar
View attachment DooMLoRD_v4.zip
what files i have to use for p1N?
Stuck at pc ! mobile screen
While doing the steps, after I pressed start Odin said "fail!" with a red square above the yellow com12 square, I disconnected the device and connected it again but ended t this screen with mobile ! pc
thanks
whats is version of this CWM ?
there are thousand of such tuts are here.. atleast provide some roms
even if you dont wipe your data new rom will be installed i tested it
nandroid backup are rubbish just try to restore from nandroid backup and your tab will be bricked( my personal exp 4 days ago)
Is Doomlord handling 2.2 tabs also, or I need 2.3 somehow? Kies is not offering a fw update.
Sent from my GT-P1000 using xda app-developers app
Error
Hey XDA,
I Have a gt-p1000 , i rooted it succesfully using ut methods and wanted to install cwm . I tried by ur method but ended up bricking
I unbricked using ur method and now a prob arises
I get the superuser icon in my laucncher but i have lost root access ..
What to do ... Please Help
U cAN unroot it using xda 's unbrick method
Unfortunately u have bricked ur device but no big issue and i did it so its very easy
evry time i try this i end bricking my device ....
Pls help i wanna install a custom rom on it
Use overcome method. Follow my signature.
Sent from my GT-P1000 using xda app-developers app
If i rooted only the tab will be formatted?
sent from my GT-P1000 using XDA Premium
noo
hamada3381 said:
If i rooted only the tab will be formatted?
sent from my GT-P1000 using XDA Premium
Click to expand...
Click to collapse
no rooting will not delete any data
I think there is a problem with the recovery file
---------- Post added at 11:15 PM ---------- Previous post was at 10:19 PM ----------
If you will use "Installing Stock Rooted Rom" method then it will be formatted, but if it's rooting with some file then i think it's ok
I completed step 3, it said that all completed but now it is stuck in a restart loop, it shows some error colors (see image), then it shows Samsung logo, vibrates 3-4 times and it restarts again.
I cannot seem to get it recovery mode (UP+Power), download mode enters OK (Down+Power).
Any ideas ?
suite?
adrianTNT said:
I completed step 3, it said that all completed but now it is stuck in a restart loop, it shows some error colors (see image), then it shows Samsung logo, vibrates 3-4 times and it restarts again.
I cannot seem to get it recovery mode (UP+Power), download mode enters OK (Down+Power).
Any ideas ?
Click to expand...
Click to collapse
do you have solved this problem? I have the same picture after installed the CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar file.
Thanks
I was able to fix mine using instructions from a different topic, it was about the "Overcome" (images, rom or whatever was that), the file name is "The_Installation_Guide_The_Overcome_Experience.pdf" and at some point it tells you to load around 3 different files in that program, and flash them all.
After this I was able to put Cyanogen images on card and easy install them with the ClockWork mod loader.
Yeah. Do not panic if the video is hosed. I also got strange disruptions when following 'some online guides'.
The closest guide I have found that works to upgrade from Stock reliably, is the process mentioned on https://goo.im/devs/cmwiki/p1/p1c/ (Verizon CDMA P1000). I only have the CDMA version, not the SIM card version.
This is undergoing major revisions. I hope. I can say there are two (2) Verizon SCH-I800 recovery images available now. One that works is the ODIN image from TheCollective.
forum.xda-developers.com/showthread.php?t=2383201
TheCollective repository http://www.theandroidcollective.org/i800/public/
I have tested this image. It works.
I recovered the device after a working 2.3.5 stock was running (from the other viable stock image) and I wanted to flash a modem.bin from heimdall. Mistake. Device locked up at 100% along with heimdall, and a forced reboot (hold power down) only gave the
PHONE - ! - COMPUTER
screen.
It would also work to restore from Download mode, with ODIN and TheCollective stock.
I have never gotten the modem working again, though.
Hi there, where can I get a superuser flashable zip for P1000? I changed from cyanogenmod to omnirom and I have lost root access.
Are you sure? I am using Omnirom and I have super user.
You mean you don't have the SuperSu or whatever icon in app tray.
Go to Settings, scroll down all the way, above "about tablet" and performance, is there a SuperSu option?
Sent from my GT-P1000 using XDA Free mobile app
i opened downloading mode but Odin is not showing anything i install given or i download latest usb driver
INSTALL TWRP AND ROOT
YOUR GALAXY TAB 4
This is for Galaxy Tab 4 7.0 SM-T23x / NU models.
New Updet : Flasheble TWRP 2.8.7.0 Download Link is given at the end of the thread.
Code:
WARNING:
1. Warranty will be void if you install a Custom Recovery and ROOT your device.
2. I am not responsible for any thing wrong happen with your device. Do this at your own risk.
3. If you blame me, I will lough at you.
4. But you can always PM me or comment here if any thing wrong happen to your device. I will try to help you.
REQUIRED:
PC
Data Cable
Your TAB 4
Some Basic Knowledge (very important!!)
A working Brain !!!! (It is inside your head)
INSTRUCTIONS:
First of all you have to download the ROOT Samsung Galaxy TAB 4 v4.zip from HERE.
My zip contains :
Odin_v3.09
SAMSUNG_USB_Driver.exe
recovery.tar.md5
UPDATE-SuperSU.zip
Extract the zip.
Install Samsung USB driver (Given in the zip) on your pc if you don't have this. If you have already installed the driver, ignore this step.
Now, lets start installing TWRP...
Open ODIN in your PC.
Put your Tablet in download mode by Pressing the Home button + Power + Volume Down. Release buttons ,when you see a warning ; then press the volume up (vol +) to continue to download mode.
Connect your Tablet to your PC
There is a option named 'AP' in the ODIN . Just tick that and click on 'AP'.
Now Select the recovery.tar.md5 file from the extracted zip.
Now you have to untick the Auto Reboot option in the ODIN. Otherwise the TWRP wouldn't start in the recovery mode.
Press START Button in the ODIN.
Wait till flashing is finished.
After flashing is finished, don't unplug, turn off or restart your device. Press and hold Home button + Power + Volume Up button untill your device restart into the recovery mode.
Now just reboot your device from recovery.
ROOTING PROCESS :
FIRST OF ALL YOU HAVE TO TRANSFER THE UPDATE-SuperSU.zip FILE( I have given in the zip) IN THE INTERNAL MEMORY OF YOUR TABLET
BOOT INTO RECOVERY MODE BY PRESSING POWER BUTTON+HOME BUTTON+VOLUME UP BUTTON
NOW SELECT INSTALL
CHOOSE THE UPDATE-SuperSU.zip FROM THE INTERNAL MEMORY OF YOUR TABLET
FLASH THE FILE AND THEN RESTART YOUR TABLET
[NEW UPDATE]
Flashable zip of TWRP 2.8.7.0 :
29/07/2014
If you have TWRP 2.8.0.1 or lower installed, you can flash the TWRP 2.8.7.0 to updet directly !! :laugh:
You Can Download the flasheble zip from HERE. just flash the zip and enjoy TWRP 2.8.7.0 .
Bugs of TWRP 2.7.8.0 :
Probably MTP is not working Fixed
Unable to restore backups Fized
Can't clear Cache partition from wipe option Fixed
ExtSdCard is not showing Fixed
Meny Thanks & Credits:
TeamWin for this beautiful recovery.
@reas0n for the TWRP 2.8.7.0 Recovery img and all fixing.
:angel: :good:
DON'T FORGET TO GIVE A THANKS, IF YOU FOUND THE POST HELPFUL
:good: :angel:
Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?
moonbutt74 said:
Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?
Click to expand...
Click to collapse
Agreed.
Links through adfly = getting money from people clicking that adfly link. Which I believe isn't at all allowed on xda (advertisement links). So.... I'm unsure about this post... ?
I am sorry...
DUHAsianSKILLZ said:
Agreed.
Links through adfly = getting money from people clicking that adfly link. Which I believe isn't at all allowed on xda (advertisement links). So.... I'm unsure about this post...
Click to expand...
Click to collapse
Should i give the original google doc link?? I am new in xda. So please help me..
moonbutt74 said:
Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?
Click to expand...
Click to collapse
But I did not copy any thing from someones post... :crying:
I chenged the link
moonbutt74 said:
Why are you reposting this?
And why are you linking through adfly?
The files in question are linked/contained in this google docs account listing
file/d/0B0K2_1KLOf0ddnUydGplTEpUd2s/edit
is this your build ? or is this copied from someone elses archives?
Click to expand...
Click to collapse
I chenged the link with the original google doc link. Now is this ok??
BRoy_98 said:
I chenged the link with the original google doc link. Now is this ok??
Click to expand...
Click to collapse
Okay, you're getting there , now why is there a password on the archive?
moonbutt74 said:
Okay, you're getting there , now why is there a password on the archive?
Click to expand...
Click to collapse
Its not for any special reason.. I just gave this...
New Recovery
BRoy_98 said:
Its not for any special reason.. I just gave this...
Click to expand...
Click to collapse
Is this latest recovery?
[email protected] said:
Is this latest recovery?
Click to expand...
Click to collapse
Yup... I think so...
BRoy_98 said:
Yup... I think so...
Click to expand...
Click to collapse
Think???? Aren't you suppose to be the one who should know this ?
ssanjy said:
Think???? Aren't you suppose to be the one who should know this ?
Click to expand...
Click to collapse
Nice Joke..!!!
It is the latest recovery..!!
work this with a german sm-t230 ?
greetings
w32parite said:
work this with a german sm-t230 ?
greetings
Click to expand...
Click to collapse
No, go into the general section and look for the thread with your model number (SM-T230)
Edit: You need this thread
thx a lot.
BRoy_98 said:
Nice Joke..!!!
It is the latest recovery..!!
Click to expand...
Click to collapse
Twrp updated in the link? I assume so and downloading
Sent from my SM-T231 using XDA Free mobile app
It worked!
My device is SM T231
android 4.4.2
Bought it, didn't update or anything
Downloaded your zip files, and scanned with antivirus (eset)- was clean.
Turned of antivirus and firewall.
Did everything in the post.
Changed the following (guide for extreme noobs)- that's me
Downloaded zip
open odin
Switched off before putting in download mode.
Put Tablet in download mode by Pressing the Home button + Power + Volume Down. Release buttons ,when you see a warning -DON'T PANIC -WAIT FEW SECONDS then press the volume up (vol +) to continue to download mode.
Connect your Tablet to your PC
Now you have to untick the Auto Reboot option in the ODIN. Otherwise the TWRP wouldn't start in the recovery mode.
Copy recovery.img.tar.md5 to C:
There is a option named 'BL' in the ODIN . Just tick that and click on 'BL'.
Now Select the recovery.img.tar.md5 file from the extracted zip.
Press START Button in the ODIN.
Wait till odin software says "RESET"
Press and hold Home button + Power + Volume Up button until your device restart into the recovery mode.
Click reboot
click system
Swipe when it asks swipe to install
Phone will reboot and open normally
Odin software will say "PASS"
ROOTING
Connect Tab to computer and paste SUPERUSER.ZIP into documents folder of Tab
BOOT INTO RECOVERY MODE BY PRESSING POWER BUTTON+HOME BUTTON+VOLUME UP BUTTON
NOW SELECT INSTALL
Select Documents folder
Select SUPERUSER.ZIP
Swipe when it asks (I forgot whether it will tell "swipe to install" or "swipe to flash"
It will say "Successful"
Select Reboot to System
Done
j55555 said:
There is a option named 'BL' in the ODIN . Just tick that and click on 'BL'.
Click to expand...
Click to collapse
No. I'm glad it worked out for you in this one specific instance, but you should be using the AP button, not the BL button to flash a custom recovery. Please edit this in your post, you shouldn't be giving other new users potentially dangerous and erroneous advice
w32parite said:
work this with a german sm-t230 ?
greetings
Click to expand...
Click to collapse
Yes. It will work for SM-T230
thisisapoorusernamechoice said:
No. I'm glad it worked out for you in this one specific instance, but you should be using the AP button, not the BL button to flash a custom recovery. Please edit this in your post, you shouldn't be giving other new users potentially dangerous and erroneous advice
Click to expand...
Click to collapse
What is the defense between BL & AP ? BL is working always for me.
I looked at other threads, and they either were really confusing, or weren't pertaining to my phone. Can someone give me a clear answer of how to root my phone?
Phone: AT&T Samsung Galaxy S4
Model Number: SAMGSUNG-SGH-1337
Android Version: 5.0.1 Lollipop
And also, I need a way of removing Knox. But rooting it is the priority!
Thanks in advance.
Okay I Found a Link
I decided to come on today, and saw that DoJCole posted a verified way of rooting the type of phone I have. Link: http://forum.xda-developers.com/galaxy-s4-att/general/root-att-s4-5-0-1-t3165816
Wrathfulweasel said:
I decided to come on today, and saw that DoJCole posted a verified way of rooting the type of phone I have. Link: http://forum.xda-developers.com/galaxy-s4-att/general/root-att-s4-5-0-1-t3165816
Click to expand...
Click to collapse
Don't Use This Method ( Kingroot ) ... Kindly Use This Method [How-To] Update to I337_OC4 - 5.0.1 and KeepRoot @muniz_ri
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Because This Method Only Able To Get Proper Root Access ... I Used Kingroot ->Successfully Rooted --> But Not Able To Install Anything Like [ Custom ROM ] ..So Always Use " Update to I337_OC4 - 5.0.1 and KeepRoot " Metthod .. Without Issues It Will Works :good:
jack_ssl said:
Don't Use This Method ( Kingroot ) ... Kindly Use This Method [How-To] Update to I337_OC4 - 5.0.1 and KeepRoot @muniz_ri
http://forum.xda-developers.com/gal...-to-update-to-i337oc3-5-0-1-keeproot-t3075814
Because This Method Only Able To Get Proper Root Access ... I Used Kingroot ->Successfully Rooted --> But Not Able To Install Anything Like [ Custom ROM ] ..So Always Use " Update to I337_OC4 - 5.0.1 and KeepRoot " Metthod .. Without Issues It Will Works :good:
Click to expand...
Click to collapse
The thing is, I don't need to update- I need to first root my phone. This update requires an already-rooted phone. Also, I don't need to update my phone.
Thanks for repsonding though!
EDIT: Wait, are you saying that I should first root using Kingroot, and then update to 1337_OC4?
Wrathfulweasel said:
The thing is, I don't need to update- I need to first root my phone. This update requires an already-rooted phone. Also, I don't need to update my phone.
Thanks for repsonding though!
EDIT: Wait, are you saying that I should first root using Kingroot, and then update to 1337_OC4?
Click to expand...
Click to collapse
No , Downgrade I337UCUFNB1_Rootable_Full_Odin : https://www.androidfilehost.com/?fid=23501681358548937
And Download I337_OC4_Stock_Rooted_ROM
https://www.androidfilehost.com/?fid=24052804347800728
If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
https://www.androidfilehost.com/?fid=23681161096070831
Then Install FlashFire ... Give Root Permission
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OC4_Bootloader using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
-_- I don't get it
jack_ssl said:
No , Downgrade I337UCUFNB1_Rootable_Full_Odin : (LINK)
And Download I337_OC4_Stock_Rooted_ROM
(LINK)
If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
(LINK)
Then Install FlashFire ... Give Root Permission
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OC4_Bootloader using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Click to expand...
Click to collapse
:| Did I mention that I'm a noob too? I rooted a phone once before (Samsung Galaxy Mega GT-i9152) and it wasn't this complicated for me... and does this bypass Knox? Thanks for responding to me so fast though.
The thing is, I don't understand what its saying...
EDIT: Okay, I see what's going on now. I can't root directly from 5.0.1- need to downgrade.
http://forum.xda-developers.com/galaxy-s4-att/help/help-rooint-galaxy-s4-5-0-1-t3235410
That link is a thread in which an answerer answered the question with two links. Its a two part process to rooting the 5.0.1 Android.
Ah ha
jack_ssl said:
No , Downgrade I337UCUFNB1_Rootable_Full_Odin : (link)
And Download I337_OC4_Stock_Rooted_ROM
(link)
If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process.
(link)
Then Install FlashFire ... Give Root Permission
Attention! Set your screen timeout to 10mins before beginning!
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Select "Flash Zip or OTA" and locate and select the ROM. Leave "Auto-mount" unchecked under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set Reboot setting to "Download."
6. Press the lightning bolt then "Ok" to begin the flash.
7. Once the flash is complete and the device reboots into "Download" mode, flash the I337_OC4_Bootloader using Odin's PDA/AP slot. Done!
The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition. Once complete your device will reboot and pause on the AT&T splash screen for about 1 - 2 minutes (15 - 20 mins for DeOdexed version) before completely rebooting. Done!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Click to expand...
Click to collapse
I would just like to say I understand it now. Thanks!
Exactly what I was looking for
please teach me how to root my phone and install CWM and TWRP.
im still noob in this site. sorry not good in english but i can understand. hopefully you could help me. i wanted to flash the noble rom powered ny remi. http://forum.xda-developers.com/gal...e-rom-v2-0make-phone-note7big-update-t3446032 :good::highfive:
How to root and install twrp revovery on grand 2 sm-g7102
hackako11 said:
please teach me how to root my phone and install CWM and TWRP.
im still noob in this site. sorry not good in english but i can understand. hopefully you could help me. i wanted to flash the noble rom powered ny remi. http://forum.xda-developers.com/gal...e-rom-v2-0make-phone-note7big-update-t3446032 :good::highfive:
Click to expand...
Click to collapse
First download kingroot and follow as the app instruct and then your device will be rooted .
Open your browser and search for "Super sume"
( but do not download it from apps4fun.com )
once u download super sume open the app and
grant it root permission and then press the big blue
icon and let it do its work once it is completed
super su will start autometiclly and then go to its seting and scroll down and search for ENABLE PRO
and put a tick on it . Now close super su and open playstore and search for FLASH FIRE and download it . Now open it and grant it root permission . Now close it and download ZIP FILE OF TWRP FOR GRAND 2 . Once u downloaded it copy i to your external sd card . Now open flash fire you will see a plus sign at the bottom press it and select flash zip or otp now select sd card as a storage from the top
and select the zip file of twrp it will show u a screen and now selet ok from the top left corner and the scroll down and select flash and then ok . And it will take 1 to 5 min to flash and its down twrp is now installed in your grand 2 . IF YOU LIKED IT PLEASE LIKE MY REPLY AND I ANY PROBLEM TELL ME
How to root and flash recoveries!
Its just easy mate, first of all youll need a PC, Odin3, and a USB Cable. Download SuperSU zip file on the chainfire website in youre phone, download TWRP or CWM recovery tar file on a specific thread, install Odin3 on any website (You need working one), so after downloading those youll need to turn off and put your phone in Download Mode or Odin mode which is for Samsung. Connect the phone into the PC and open Odin3, after opening youll see buttons which includes AP or PDA. Select it and choose the tar file and turn off any settings if told on instructions of installation, after setting those flash and once its done and shows "PASS!" remove battery for 10 secs if told and set your phone on recovery. Select install zip and choose the SuperSU zip file on the download location and BOOM! Youre done mate.
LEAVE A THX PLS! Sincerely youre friendly neighbor NYT
How should i install twrp on grand 2 sm-g710k?
NYT_RootComm said:
Its just easy mate, first of all youll need a PC, Odin3, and a USB Cable. Download SuperSU zip file on the chainfire website in youre phone, download TWRP or CWM recovery tar file on a specific thread, install Odin3 on any website (You need working one), so after downloading those youll need to turn off and put your phone in Download Mode or Odin mode which is for Samsung. Connect the phone into the PC and open Odin3, after opening youll see buttons which includes AP or PDA. Select it and choose the tar file and turn off any settings if told on instructions of installation, after setting those flash and once its done and shows "PASS!" remove battery for 10 secs if told and set your phone on recovery. Select install zip and choose the SuperSU zip file on the download location and BOOM! Youre done mate.
LEAVE A THX PLS! Sincerely youre friendly neighbor NYT
Click to expand...
Click to collapse
The first step bro look at it.
Hamza Muzaffar said:
How should i install twrp on grand 2 sm-g710k?
Click to expand...
Click to collapse
There is No TWRP for the Korean Variant of the GRAND 2 (SM-G710K)
STORMING BLOOD17 said:
There is No TWRP for the Korean Variant of the GRAND 2 (SM-G710K)
Click to expand...
Click to collapse
And what if i want to install noble rom in grand 2 it is not possible?
Hamza Muzaffar said:
And what if i want to install noble rom in grand 2 it is not possible?
Click to expand...
Click to collapse
You need to flash TWRP first
But there is No TWRP FOR SM-G710K
Flashing will probably Brick your device and/or corrupt your EFS partition
Obsolete, move to the new thread here below.
(EASY ROOT) Z982 via QFIL or TWRP B20_Modified SYSRW 4/8/19
xxMoon said:
!!!!!WARNING!!!!!!
This will wipe your phone.
Prep
Enable USB Debugging and OEM Unlocking on your phone
Install ADB Driver
Install EDL Drivers
Restart Computer
Files
ZTE_BLADE_Z_MAX_edl.7z
Guide
1. Extract the folder inside ZTE_BLADE_Z_MAX_edl.7z to your desktop.
2. Connect your phone to your computer.
3. Open the folder "ZTE_BLADE_Z_MAX_edl" that you just extracted.
4. Right click on ZTE_BLADE_Z_MAX_edl.bat
5. click run as administrator
6. Press Y
7. Press 1
8. Press 2
9. Press Y
10. Press N
11. Press 1
12. Press 3
13. Press Y
14. Press N
15. Press Q
16. Disconnect your phone from the computer.
17. Press and hold "Power and Vol+" untill the ZTE Logo Appears then release the power button while continuing to hold vol+
18. Once booted into TWRP Recovery, swipe to allow modifications.
19. Tap Wipe
20. Tap Format Data
21. Type yes
22. Tap Blue checkmark
23. Back out to the main screen.
24. Tap Reboot
25. Tap System
"Initial Boot will take some time, and may even reboot"
"If more than 5 mins elapses, press and hold power button to restart device"
26. Setup Android
27. Locate Magisk and open it.
28. Install magisk manager "May have to anable unknown sources first"
!!!!DO NOT UPDATE MAGISK!!!! Only update the magisk manager.
Profit!!!!
Click to expand...
Click to collapse
nvm fixed my issue
So upto magisk v18.0 works fine. However, 18.01 causes the phone to go into dfu mode.
It is important that you only update magisk manager, not magisk itself.
xxMoon said:
So upto magisk v18.0 works fine. However, 18.01 causes the phone to go into dfu mode.
It is important that you only update magisk manager, not magisk itself.
Click to expand...
Click to collapse
Even though it says I have 18.0 installed, whenever I download a module it says that I need version 17.0+ which sucks because I really want to change the fonts. Whenever I try booting into twrp to manually flash, it never shows my files, no matter where I put them, I tried using Es file explorer to move them to/system/bin but it says operation failed every time so I do not know what to do at this point. I cant flash files via twrp or magisk and I really would like some help on this.
---------- Post added at 06:40 PM ---------- Previous post was at 06:32 PM ----------
If so can you give me a detailed explanation on how to flash modules through ADB, seems that it is my only option until Magisk lets me download what I want. All I want to do right now is change my fonts so I can get rid of these blob emojis. If it helps, the file I'm trying to obtain offf magisk is called IOS 12.1 Emoji but like I said, it says I need v17.0 to install and gives me installation failed everytime
Good ****!!!!
Since a lot of people are having problem with magisk all just rebuild my boot.img so you won't have to add the su file. Then hopefully people would use it because it currently up to date without any issues I can find
Jasonls221 said:
Since a lot of people are having problem with magisk all just rebuild my boot.img so you won't have to add the su file. Then hopefully people would use it because it currently up to date without any issues I can find
Click to expand...
Click to collapse
I did a whole reflash using yours and magisk wasnt there so I had to go back to the original one posted from moon. Can you explain what you did to flash yours and get it to work? Can you also re-upload the file on here? Thank you
evtoofly said:
I did a whole reflash using yours and magisk wasnt there so I had to go back to the original one posted from moon. Can you explain what you did to flash yours and get it to work? Can you also re-upload the file on here? Thank you
Click to expand...
Click to collapse
The only problem with mine was you had to transfer the su file I supplied to /system/bin
Jasonls221 said:
The only problem with mine was you had to transfer the su file I supplied to /system/bin
Click to expand...
Click to collapse
so without fully reflashing , all i have to do is use a file explorer to transfer su, and then use twrp to flash the boot image only? I really dont wanna have to wipe my device again and set up my phone again
---------- Post added at 05:35 AM ---------- Previous post was at 05:33 AM ----------
Thats another problem I face as well, no file explorer has let me move a file to the bin folder so how did u do it?
evtoofly said:
so without fully reflashing , all i have to do is use a file explorer to transfer su, and then use twrp to flash the boot image only? I really dont wanna have to wipe my device again and set up my phone again
---------- Post added at 05:35 AM ---------- Previous post was at 05:33 AM ----------
Thats another problem I face as well, no file explorer has let me move a file to the bin folder so how did u do it?
Click to expand...
Click to collapse
I used twrp and adb. adb push su /system/bin
Jasonls221 said:
I used twrp and adb. adb push su /system/bin
Click to expand...
Click to collapse
where did u place the boot file on your device for twrp because twrp never sees files for me
also with the su file, can I put that anyweher on my device and run that adb command for it to transfer? sorry im confused
edit: I managed to get everything working and now I can install modules and also have the latest version of Magisk, thank you!
evtoofly said:
where did u place the boot file on your device for twrp because twrp never sees files for me
also with the su file, can I put that anyweher on my device and run that adb command for it to transfer? sorry im confused
edit: I managed to get everything working and now I can install modules and also have the latest version of Magisk, thank you!
Click to expand...
Click to collapse
Cool, I'll try to make this automated but I'm not good with windows
I cant wait for roms to come out for this device! Also gotta learn how to turn s secure on for this device , now that its rooted.
evtoofly said:
I cant wait for roms to come out for this device! Also gotta learn how to turn s secure on for this device , now that its rooted.
Click to expand...
Click to collapse
I could make a custom ROM once there's a TWRP recovery able to flash zips successfully
good job...
Legit works like a charm.. Very impressive!! All hail the ZTE PIMP!!
---------- Post added at 05:00 AM ---------- Previous post was at 04:59 AM ----------
Question i have a zte z970 that has had the firmware deleted. Anyone know of a fix for this?
---------- Post added at 05:03 AM ---------- Previous post was at 05:00 AM ----------
I can boot into normal recovery but i cant flash any of the stock firmware i can find....
For z970 , that is a easy fix, get your twrp firmware backup and restore it ...Don't tell me you don't have the backup...I have backup but it interludes my person things together
Would I be able to install systemless xposed via magisk or no?
evtoofly said:
Would I be able to install systemless xposed via magisk or no?
Click to expand...
Click to collapse
I've tried, but I dont think it worked.
xxMoon said:
I've tried, but I dont think it worked.
Click to expand...
Click to collapse
It actually does work. With the latest magisk, all you do is download the xposed sdk 25(Android 7.1) module on magisk and then download xposed 3.15 apk installer and xposed will work. I have been using it all day and already have some xposed modules installed:good: