Hi, I'm new to here, so I can't post in the developer section.
I just moved to this kernel and ROM, but my WiFi isn't working. I was not previously on Doom. I installed the kernel, went into CWM and flash the ROM, and the WiFi is no longer working. I'm not sure what I've done wrong. Can somebody point what's wrong to me? Thanks.
try flashing this from CWM:
https://www.dropbox.com/s/excimxn5917yos0/ARC-DooMKernel-ICS-v04-modules_CWM (1).zip
Tried it, but no cigars. I noticed under About Phone that it says my phone is an LT18i, but it is an LT15i. This shouldn't make a difference, should it?
Edit: Tried a few things and got it working. Could someone delete/close this?
Related
Hey people im having A huge problem (took me ALL afternoon to get here) ok so i flashed a bad ROM, Odin'ed back to stock (but when i did that it always said "wipe data failed", and now im trying to restore a backup in recovery and it keeps on freezing at "pcsync_stream" and it also froze one time at "HALGPS_conf.cfg", i replied on a post that had a similar problem but no one answered so i made my own, here is the link to the other post if you need more info:
PLS REPLY AND THANK YOU!
I ran into the same problem today. I'll keep an eye on this post and let you know if I come up with anything.
WAudette...
Did your bad ROM also flash a new kernel? Nandroid doesn't flash the kernel back, so you might need to do that as well. I have no idea if this is THE problem, but it is a common problem.
Good luck.
I've run into this before myself, when I forgot to disable the Voodoo lagfix before flashing something. You could try disabling it using ADB if you know how to do that, but that didn't work in my case. You're likely going to have to use ODIN. The instructions are here: http://forum.xda-developers.com/showpost.php?p=8129898&postcount=1 under "Did you flash something before disabling Voodoo?", Fix 1.
Hi there an good evening. I have a major problem with the Custom Rom Baldoz Rom5.0, just released today.
I cant post in the developers thread, cause i dont have 10 posts, sadly. So i need to post it herer
Just downloaded it, disabled lagfix via CWM (Darkys Rom9.5) and wiped. After this i installed the new rom. Looks good in the first place. But im not satisfied with the performance so i tried to get back to Darkys via CWM, but now i have the problem:
Its not possible via the 3-key method to go into recovery. Just stucks at Galaxy s IT9000 and didnt go any further.
Removed battery, but that didnt solve anything.
Hope, u can help me. Would be great
Try to go in recovery mode using extended Power menu
The same here! Stuck and missing appz
Hey.
I'm having difficulties with new cyanogenmod 7.1
I Followed different tutorials and none of them helped me.
I started with stock 2.1 rom and did all the unlocking bootlader stuff , then installed custom kernel and managed to install cyanogenmod 7.1 but then occurred a funny thing . There was only FreeXperia logo showing up, nothing else, and it rebooted all the time. Then I flashed stock rom again and tried to understand what's wrong and tried to use different kernels and nothing.
So my question is. Is there anything I'm missing here?
Henri.
Full wipe after you install rom.
Dot forget to make backups first.
about that...
i always do full wipe after installing roms, so it has to be something else.
Thnks anyway..
But after browsing several topics in XDA forum I saw that I'm not only one with the problem.
If anybody has had the problems like I do and got the solutions, every kind of tips are welcome.
Thread closed
I got it all working, but I don't know what was the reason, because, I just did the whole thing again about three or four times, and then it just booted and worked.
I never could install Cyanogenmod in my phone... could you?
Hey!!!
I could write a total working tutorial how I managed to get to work everything, but it takes time, so if you want tutorial send me private message , so I create it for you.
Henri
Does wifi and/or 3G work for you longer then 15 minutes?
No, but at the moment I'm using RC1 flawlessly.
Sent from my E15i using XDA App
coffee-break said:
I could write a total working tutorial how I managed to get to work everything, but it takes time, so if you want tutorial send me private message , so I create it for you.
Henri
Click to expand...
Click to collapse
umm..why not post it publicly man ? It will be useful for everyone including myself.
Would also like that tutorial
ok,
i'm gonna post it here after finishing it.
So, the wanted tutorial is here!
Firstly it's for xperia x8(E15i) to be superclear.
I'm gonna put that tutorial into steps.
STEP 1
You need to have stock 2.1 rom with baseband XXX015 , if you don't have it, then go to Sony Ericsson's webpage and download the upload service and flash it back into your phone.
STEP 2
You phone has to be rooted. Easieset way is using Superoneclick(sorry, i'm not gonna provide the link, because it's just google-ing thing to you who need rooting program)
STEP 3
Now, everything comes to the unlocking process for bootloader. there is also tutorial how to succeed when using s1tool and msm7227 (if you have problem, then I don't know). Try to undestand the tutorial of doing it.
S1tool is for identifying if your phone is unlocked or not.
and msm7227 is for unlocking
tut is here - LINK
I wish luck, don't brick your phone, but it's not so hard to understand tutorials if you have right phone and right tutorial.
STEP 4
I totally suggest to install stable rom. The reason is that released 7.1 has bugs and incompatibility with some phones and i haven't got wifi and 3g working , but tried different roms and kernels.
I provide links i got from deani77, big thanks to him.
You can try this link for FXP028 ROM - http://www.multiupload.com/IIWIPG1ALH
For FXP030 kernel try this link - http://hotfile.com/dl/132650338/7b17...USTOM.ftf.html
(that release is RC1 of Cyanogenmod 7.1 but I think it's the best at the moment!)
and you download all the files as usual. Rom zip package should be in the SD card's root folder, so you can easily install it after flashing kernel
STEP 5
installing is quite simple actually. You need to use flashtool that is provided with rom(link in step 3)
firstly you flash kernel. Kernel file is the one you downloaded .ftf file. You have to put that file(X8_custom.ftf) into firmware folder which is inside of flashtool folder.
Then you open flash tool and you click FLASH, then appears little window and you click ok and then you need to plug in your phone into usb while holding down back button. Your phone has to be off when you are doing that. Then flashtool identifies your phone and will flash the kernel into your phone. when everything comes smooth then you now have fxp custom kernel. it has clockworkmod recovery and you need to click several times back button when FreeXperia logo appears.
STEP 6
You have to do factory reset and format, also i suggest from advanced menu using format system.
Then you select from the recovery menu install custom zip... and you browse your rom .zip file and if everything is OK then it should display "installing update or smth" if it's done then good for you, you reboot and it should work.
IF YOU WANT GOOGLE APPS , then google the link and install it same way you did with the rom. You can do it any time.
..
So if anything is not understandable then ask. I'm not an expert or anything, I just did things like I described.
Best,
Henri.
i have still had problems with bootloop and passing md5 checksum any idea on how to fix this?
mm.. at the moment I don't know but what that md5 checksum means?
I fixed my bootloop issue when I flashed back to stock rom, then I just did all the steps I describe again (not unlocking bootloader because it was unlocked already) .. but I don't know what's really does the bootlooping thing. I just got lucky. It took me like billion hours until I got it working...
ok so heres the rundown. i have my hd2 and have in the past put a different rom on, so it is not stock(just for a reference point). Now i want android, I have multiple verions n builds which were using paranoid android and cm9 for ice cream sandwhich. Every build i throw on there i always boot thru the sd card thru the clrcad.exe. Every build i try the wifi is never able to find any sources, it just keeps turning on n off.
That is my problem and didnt know how to go about it. Just for Reference 1. I have looked thru all the developer threads and did see others had problems and they got no solutions. 2. i just joined so i cannot post in the developer threads to ask them for help. 3. i did search the forums for similar problems but nothing related to the same problem they were using different build or os. If i missed somthing please tell me.
I thought maybe since i dont have a stock rom on the hd2 it might be interfering with ics. The wifi works fine while using windows. A second thogut was maybe i should just install the magldr which from what i read would wipe the internal mem, but once the first time putting that on there i could was done i could boot thru that instaed of using clrcab.exe.
Here you go:
http://forum.xda-developers.com/showthread.php?t=1445766
You are welcome.
Marvlesz said:
Here you go:
http://forum.xda-developers.com/showthread.php?t=1445766
You are welcome.
Click to expand...
Click to collapse
i would just hit te thanks! button but it said i didnt have permission so Thanks! i will try thatright now
ok so i applied the apk and installed with superuser permission without a problem. i then reset the phone, but it didnt work. So i made sure that under advavance configuration it said US, tghen proceeded to input the *#94349# and it said that wifix was enabled, but still the same problem it just turns on n off all the while giving me the unending message of "turning on wifi..."
but now here is the things i have tried since yesterday i have made to installer hardspl 2.08 and radio 20.15.50.14 and then magldr. With little trouble i was able to get android to run stright from bootup now instaed of going thru windows. Everything runs great except for wifi, i technicly not sure if data works as to i dont have it on yet, soon tho.... soon...
Any ideas would be much thanks. BTW im trying PARANOIDANDROID HD2 [v1.5b][TABLET/HYBRID][CM9][tytung HWA R3] from the thread [26-Aug-12][sd/mag] paranoid jellybean hd2 Beta v1.992.
You said you tried the same apn under windows and it worked. Now you're on ICS and it doesn't work.
I had this problem a while ago when I went on a vacation, it just used to say "truning wifi on", but nothing shows up. It's a regional wifi problem. OK, try this: flash a rom without a simcard inserted, and check if the wifi is working. IF, it works, then WiFix SHOULD fix your issue, otherwise report back.
(Btw, there is another way to fix the regional wifi by replacing the wireless modules, but I can't find the link, sorry )
Marvlesz said:
You said you tried the same apn under windows and it worked. Now you're on ICS and it doesn't work.
I had this problem a while ago when I went on a vacation, it just used to say "truning wifi on", but nothing shows up. It's a regional wifi problem. OK, try this: flash a rom without a simcard inserted, and check if the wifi is working. IF, it works, then WiFix SHOULD fix your issue, otherwise report back.
(Btw, there is another way to fix the regional wifi by replacing the wireless modules, but I can't find the link, sorry )
Click to expand...
Click to collapse
ok so my next step is is flashing it to the internal, got it. Afraid to do but willing. I tried the wifix and according tothe phone the country code is US right now and currently im trying different kernals from the thread. Once i burn thru those with no success which hopefully ill find a good one i will try your method Thank you for your assistance.
deus_diabolus said:
ok so my next step is is flashing it to the internal, got it. Afraid to do but willing. I tried the wifix and according tothe phone the country code is US right now and currently im trying different kernals from the thread. Once i burn thru those with no success which hopefully ill find a good one i will try your method Thank you for your assistance.
Click to expand...
Click to collapse
ok so i have burn thru most of those kernals not seem to work except some were laggier. Reverted back to original kernal the dev was using and removed sim card. It didnt help still had same problem. Still want to stay with this build but i am looking into a similar build for rom to flash to internal.
deus_diabolus said:
ok so my next step is is flashing it to the internal, got it. Afraid to do but willing. I tried the wifix and according tothe phone the country code is US right now and currently im trying different kernals from the thread. Once i burn thru those with no success which hopefully ill find a good one i will try your method Thank you for your assistance.
Click to expand...
Click to collapse
deus_diabolus said:
ok so i have burn thru most of those kernals not seem to work except some were laggier. Reverted back to original kernal the dev was using and removed sim card. It didnt help still had same problem. Still want to stay with this build but i am looking into a similar build for rom to flash to internal.
Click to expand...
Click to collapse
Oh, you're using an sdrom, sorry I forgot that !
No, it doesn't have to be to the internal, just a fresh install (whether nand or sd, and in your case it's SD)
And you totally misread my answer, I didn't mean Kernels and I didn't mean remove the sim while still on the same rom x)
Maybe it's my fault for writing such an answer, let me paraphrase my answer for you:
1- Remove your current build from the SD card (better if you backup your whole sd to pc and format it)
2- Remove simcard. (BEFORE INSTALLING)
3- Put totally fresh and new rom on sd.
4- Boot up ROM and test wifi.
5- Report back Read the edit
Edit:
OK, first of all, I'm sorry for not reading the whole thread. I just read it again, and will answer your questions.
You wanted to try android so you went for Icecream (which has the regional Wifi issue)
As long as the radio is correct, the stock ROM should not interfere with android.
No, if it is (truly) the regional issue, installing android through MAGLDR will not solve your issue. it will persist.
And btw, instead of doing all the steps, just try a GingerBread ROM, if wifi works there then it is the regional issue.
Marvlesz said:
Oh, you're using an sdrom, sorry I forgot that !
No, it doesn't have to be to the internal, just a fresh install (whether nand or sd, and in your case it's SD)
And you totally misread my answer, I didn't mean Kernels and I didn't mean remove the sim while still on the same rom x)
Maybe it's my fault for writing such an answer, let me paraphrase my answer for you:
1- Remove your current build from the SD card (better if you backup your whole sd to pc and format it)
2- Remove simcard. (BEFORE INSTALLING)
3- Put totally fresh and new rom on sd.
4- Boot up ROM and test wifi.
5- Report back Read the edit
Edit:
OK, first of all, I'm sorry for not reading the whole thread. I just read it again, and will answer your questions.
You wanted to try android so you went for Icecream (which has the regional Wifi issue)
As long as the radio is correct, the stock ROM should not interfere with android.
No, if it is (truly) the regional issue, installing android through MAGLDR will not solve your issue. it will persist.
And btw, instead of doing all the steps, just try a GingerBread ROM, if wifi works there then it is the regional issue.
Click to expand...
Click to collapse
ok so i took sim card, formated the sd card, put fresh build on and started it. Loaded in and still same exact problem. ok so will try gingerbread.
ok so put gingerbread on phone and loaded it up and gave it a reboot just because. Loaded up, turned on wifi hit settings for it, it just said scanning. Backed out installed wifix, and dialed *#93439# it engaged and still nothing changed. Now on both this and ics i input my ssid and wep key for my home router just to try and help out but just said not in range. If i dont put that in, ice just says turning wifi on... then off then on etc..., on gigerbread it says scanning. So im stuck on what to do the only thing i havent tried far as i know (which is very little) is to flash to the interal mem.
On gingerbread you don't need the WiFix.. uninstall it.
if it says scanning, that means it's working.
Hey guys. Im a new user (posting wise) so I cant post in development, but, I have a few questions.
I just got a Galaxy s4. rooted, installed teamwins recovery, and flashed infamous 6.0.
Att i337 ucuamdl
It flashes fine but at boot it says "System UI has stopped" and upon completing setup i get the "settings stopped" message and kicked back to entering my name. Endless loop.
Ive read earlier in the Infamous thread that this is caused by a lokidoki issue. The dev has stated that lokidoki doesnt need to be flashed anymore, but, I tried flashing it after the rom flash just in case. Still no dice. I've also tried rebooting, reflashing, and flashing lokidoki after and not.
Ive gotten Infamous 3.5 to flash fine but I love the tweaks and lcd density on the 6.0 version. Perhaps Im missing something very obvious?
Any ideas on what I can do to cure this? Thanks for your time guys.
here is the thread and the discussion theyre having
http://forum.xda-developers.com/showthread.php?t=2304792&page=38
fresh wipe everytime.
Synergy-7 said:
Hey guys. Im a new user (posting wise) so I cant post in development, but, I have a few questions.
I just got a Galaxy s4. rooted, installed teamwins recovery, and flashed infamous 6.0.
Att i337 ucuamdl
It flashes fine but at boot it says "System UI has stopped" and upon completing setup i get the "settings stopped" message and kicked back to entering my name. Endless loop.
Ive read earlier in the Infamous thread that this is caused by a lokidoki issue. The dev has stated that lokidoki doesnt need to be flashed anymore, but, I tried flashing it after the rom flash just in case. Still no dice. I've also tried rebooting, reflashing, and flashing lokidoki after and not.
Ive gotten Infamous 3.5 to flash fine but I love the tweaks and lcd density on the 6.0 version. Perhaps Im missing something very obvious?
Any ideas on what I can do to cure this? Thanks for your time guys.
here is the thread and the discussion theyre having
http://forum.xda-developers.com/showthread.php?t=2304792&page=38
fresh wipe everytime.
Click to expand...
Click to collapse
Hi,
You may get a better answer by posting in your own DEDICATED FORUM
thank you. i was a bit confused as to where to post.
On the other hand, i think it be an issue with TWRP.
Mods, can you close this? Ive started a new thread
http://forum.xda-developers.com/showthread.php?p=45541864#post45541864
Synergy-7 said:
thank you. i was a bit confused as to where to post.
On the other hand, i think it be an issue with TWRP.
Click to expand...
Click to collapse
Hi,
There is a TWRP for your phone as well.
Also,you could choose a different recovery.
malybru said:
Hi,
There is a TWRP for your phone as well.
Also,you could choose a different recovery.
Click to expand...
Click to collapse
i have TWRP now but I think a different recovery might do me so good from what I've read so far. Im having trouble getting CWM installed. I cant get the two files I need for loki copied into /data/local/tmp. Root browser says theyre copied but nothing shows up.
UPDATE: ive installed infamous 3.5. works great. having trouble with 3minit but i did use rom tool box pro to change lcd density
to 320 under build props.
UPDATE 2: Flashed tmobile kernal and tmobile lcd density in the infamous 6.0 aroma installer using CWM from Rom manager. everything went great. Even though i have a i337, the tmobile kernal flashed fine . I loki'ed after the rom flash and it booted fine.