Related
Apologies for the double post but I'm dying to get my wildfire back working.
Rooted it yesterday with unrevoked, attempted to add the Openfire ROM this morning with everything going fine untill the reboot. I'm now stuck on the white HTC screen and have been for the last hour. Any help would be great, cheers.
did u do nandriod back up first
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
I backed up the stock firmware I already had manually, before it prompted on the flash.
did you do a full wipe before flashing the rom?
No i didn't, thought it would be safer incase something went wrong?
run your restore then I couldn't get it to work either
Sent from my Archos5 using the XDA mobile application powered by Tapatalk
if you did a nandroid backup of your stock rom then you should be fine to wipe, since you did not wipe and flashed the new rom over your stock rom, apps and settings will conflict, therefore not work...
Right I see, I'm currently going through what I'm guessing is the restore....recovery - Nandroid, I'll let you know how I get on.
Thanks again.
Nope I seem to be getting nowhere here, can someone point me in the direction of the restore?
you didn't do nandroid backup did you haha, you'll have to install an RUU file to return to stock rom, or just do a full wipe and flash a new rom like openfire or wildpuzzle.
Where can I find the RUU file and how do I access my SD card? USB won't let me get to it, I'm guessing the phone is in charge mode?
go into recovery - partitons menu - mount sd card (or somthing like that) to open your memory card
Spot on, I'm on downloading an ruu file now, going to load it up with a stock rom then try flashing it again, but wiping it this time.
Infact how do I do a full wipe? I'm after the easiest way to get the phone booting up so I can flash it properly?
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
go into clockwork recovery and click the title "wipe data/factory reset" and then flash the ROM you want to use.. to install a ROM:
- "install zip from sdcard"
- "Choose zip from sdcard"
- "click the zipfile"
- "yes"
- "reboot"
and if you want to install RUU dont ask me never done that
Reggie24 said:
Anyone?
I'm still no further than I was three hours ago!
EDIT:
BREAKTHROUGH!!! =D
Restored it to before I flashed it incorrectly. Nearly threw the phone across the room in excitement.
Click to expand...
Click to collapse
How did u restored it .....????
sunny_16977 said:
How did u restored it .....????
Click to expand...
Click to collapse
From the HBOOT screen go to recovery, then nandroid, restore, and to the appropriate time/date.
I've still had no luck with actually flashing the phone though. Back to Android 2.1 for me.
I'm 99% percent sure you have the OC issue some ppl incl myself on here have - try reinstalling openfire if thats what you wanna use - and then go to wildpuzzle thread - dl 0050 and flash it. If i'm correct phone will be fine and use openfire - but will NOT be overclockable. I wish Jacob had my phone or got hold of a phone w that problem...
I had problems with the Wildpuzzle 8.0.11 ROM, it would just sit there (did a ADB logcat on it, but I've lost the actual log... sorry! ) ignoring a duplicate entry (yeah, I did a full wipe . Removed WP and put on the latest OpenFire ROM... omg... what a difference to the stock ROM! Soooo much faster, even before I overclocked it.
I'd say, if you have boot issues with WP give OpenFire a go. Certainly worked a treat on my Wildfire.
i want to know if i can keep the stock rom for my epic(Build:sph-d700 eclair.di18, kernel:2.6.29) and add a custom kernel? and which kernel is the best for battery life and speed? tired 2 times and bricked my phone both times. phone is rooted and used the one click root.
juice.ki11z said:
i want to know if i can keep the stock rom for my epic(Build:sph-d700 eclair.di18, kernel:2.6.29) and add a custom kernel? and which kernel is the best for battery life and speed? tired 2 times and bricked my phone both times. phone is rooted and used the one click root.
Click to expand...
Click to collapse
There's a sticky at the top of the forum that lists the custom ROMs and kernels available for the Epic.
I suggest you pick one and try it. If you like it keep it, if not, flash another.
You need to be rooted and you need custom recovery.
Via clockworkmod recovery, you can flash just a kernel to your stock ROM.
hope this helps
has anyone made a video on how to do it the right now on a EPIC? i tried it like 5 times with baby step step2 and it didnt work on DI18
juice.ki11z said:
has anyone made a video on how to do it the right now on a EPIC? i tried it like 5 times with baby step step2 and it didnt work on DI18
Click to expand...
Click to collapse
you need to be rooted. you also need clockwork mod recovery.
then you can flash a different kernel
yeah i have all that and ive watched videos on how to do it on other phones but not on the epic it seems easy but when i do it my phone mess's up! i put the zip in the root of the SD card power the phone off and put into clockworkmod instill the zip and it bricked my phone every time. not sure if im doing it right. thats why im asking if theres a video on how to do.
Do One-click-root, clockwork recovery (both should be done from the computer via USB debug mode) then, power off your epic. Next, Hold Volume Down, Camera Button and Power Button until the clockwork recovery screen pops up(should be green text, not blue which is the stock recovery). If you have the custom kernel already in your SD card, go to Install Zip From Card > Choose Zip from SD Card > (Custom Kernel)
And there you have it.
To flash any rom, you do the same thing
dude i did all that and it doesnt work. it says everything was installed but when i reboot it, it doesnt go pass the samsung.com screen. what kernel works with stock rom DI18??
I've tried both Phoenix Kernel 1.49 as well as Xtreme kernel's 1.0 version. Both work fine. I think you need to flash back to stock rom via Odin and redo the process... you know how to do that right?
i havent changed my rom im using the one the phone comes with i just want a custom kernel thats all! ive reset my phone 5 times in the last 24 hours trying to get this to work! and nothing.
The process is very simple for flashing a new ROM/Kernal, and you seem to have the concept down. You could try restoring to factory, re-rooting through the one-click to ensure it goes through correctly, than try flashing a new kernal then.
Also i know for new roms the first boot takes a while, im not sure how it is for kernals. Also i noticed theres a few different kernals around here, some for 2.1 and some for 2.2. Make sure you are using ones compatible with 2.1 if you are on the stock rom!
yeah i did that i tried babystep and step2 and both didnt work. i dont want to give up! but im over reseting my phone.
Do you get any errors at any point?
Sent from my Android using Tapatalk and Wifi/CDMA
when its installing the zip on other videos i see the yellow bar load till its done but i my phone it starts than big blue letters so up on the screen. and its goes back and it says its done and that it was installed but when o reboot my phone it wont go pass the samsung.com screen
Which kernels have you tried?
Sent from my Android using Tapatalk and Wifi/CDMA
babystep, step 2
I'm sorry but I dont know what babystep and step 2 are. Link?
Sent from my Android using Tapatalk and Wifi/CDMA
http://www.bakedsnackshack.com/source/
Its those kernels. I tried babystep and I too only see the samsung.com splash. Those kernels are probably optimized for baked snack. My guess is they dont play nice with the stock boot animation.
Sent from my Android using Tapatalk and Wifi/CDMA
Try Phoenix 1.49s.
Sent from my Android using Tapatalk and Wifi/CDMA
I'm curretly using xtreme kernal with stock rom, and then setcpu to have it set at 200min 800max... still not getting better battery life though. I think ill try phonex kernal next...
Sent from my SPH-D700 using XDA App
First of all, I'm sorry if there is a thread similar to this, or with the same purpose. I'm opening this thread because I've tried almost every mod for LG GT540 and I don't know what to use anymore...
Been a long Cyanogen mod user, I've now changed to Super Fast Froyo and I find it really as it says SUPER FAST.
What I'm asking you is, if you can tell me what is the best mod for playing games the phone wasn't designed for (any 3D game), surfing (without force closes), and using the phone as a PHONE (calls, messages - without force closes)
I've tried OpenSwift (don't know what version) about 3 months ago.. and I was able to play games, but in that time the mod wasn't stable...
Also, Cyanogen 7 (2.3.3) and I wasn't able to play games.. though the phone worked smooth, with some force closes and few restarts..
I've searched lots of forums, but everywhere there are persons saying this is better than that and vise versa..
That's normal yea.. but got tired of that, and decided to open a thread here..
About the games not playing.. well I maybe am a beginner.. but I've tried everything I could..
Any help appreciated ..
Thanks.
Stay on a custom 2.1 rom it will solve all ur problems..
Use swap for speed.
Link sd for unlimited storage space.
Nothing is as stable as 2.1 version.
Sent from my GT540 using XDA App
I agree with sanmit that everything works in 2.1 and for games is good. So you should stay in one of the many good custom versions out there. And check the other posts until devs cook something worth it to change again. Now mur4ik has released version 2.0. So will see how it goes and inform
Sent from my GT540 using XDA App
Thanks for replying!
I've decided to go with Elegance Swift 2.1, but I have a problem now... I can't flash it with Clockwork Recovery... it says "installation aborted"
I have wiped user data, phone, cache.. everything but it just doesn't work.. Is there a way to do this with fastboot? That's lots easier.. but I see a file called "data.img" here and don't know how to write that on phone
Thanks.
buya new phone?
just sayin, i dont think the gt540 is the best one for gaming. as its not capacitive screen. so you cant play mario or something smooth. but yeah as said above the stock 2.1 is the best. as i hav the SwiftDroid milestone1 V2.0 android 2.3.3 the battery dies too quick to play many games.
I don't want new phone lol
by the way... I found out how to install via Recovery.. but now my phone won't boot.. it's stuck on LG LOGO...
I can't post in developers threads.. and I can only ask here..
hi mate you need to flash both the recovery image and the boot image that should get your phone working again
eoghan2t7 said:
hi mate you need to flash both the recovery image and the boot image that should get your phone working again
Click to expand...
Click to collapse
Well.. I flashed clockwork recovery (if that's what you meen) and using CR i used the option restore to actually install the Elegance Swift 2.1 mod
do i have to flash the boot image after i did this with fastboot or?
EDIT
Did use fastboot for boot.img, still the same problem...
if you flashed via recovery then the boot.img should have been included in the backup so in what i will do is download the rom your tring to use and make a fresh backup and upload it for you
link me to the thread you downloaded the rom from
eoghan2t7 said:
if you flashed via recovery then the boot.img should have been included in the backup so in what i will do is download the rom your tring to use and make a fresh backup and upload it for you
Click to expand...
Click to collapse
Wow.. thanks..
h* t p : // www . multiupload.com/WP41EZA5BO
this is what I used (with Clockwork Recovery 3.0.0.5 - i know that there is newer)
ok give me half an hour and ill get you a working version of this
uploading now for you i have included the easy flash tool
download this and put your phone in fastboot mode then run the start me.bat in the zip folder hopefully that should work
http://www.sendspace.com/file/a8l3hg
Thanks for the effort .. but I'm getting FAILED (data transfer failure (Too many links))
when trying to send system.img to phone
EDIT
I'm using XP SP3, does that changes anything? :\
EDIT 2
Can you just tell me how to do this with Clockwork?
to do it via recovery copy the zip file you and me downloaded to to the root of your sd card then go into recovery and select install update zip then select choose update zip and then select the zip file you copied to the root of the sd card
eoghan2t7 said:
to do it via recovery copy the zip file you and me downloaded to to the root of your sd card then go into recovery and select install update zip then select choose update zip and then select the zip file you copied to the root of the sd card
Click to expand...
Click to collapse
It worked, finally!
Thanks a lot for you time and help
no problem anytime
I think that CM7 is a lot better than 2.1 in many terms. (battery is worse, but it still lasts 2 days)
Use the stock 2.1 thats the best for your wishs...
Its the most useful...
i try everything but always back to stock or soft mod 2.1
hello all, this is my first post, and i am new to this kind of things but i have been downloading and testing aloooooooooooot of roms, and i have been suffering from battery drain until i find the solution by my self, and i said why not share it with all this people facing the same problem.
first flash the LT15i_4.1.B.0.431_Europe 1 from here http://forum.xda-developers.com/showthread.php?t=1330314
flash some kenel which will give you CWM ( any kernel )
then download this one again (KA20.1_Ice_Cream_Sony_Arc&ArcS) from here but please follow the instruction of how to install this one http://forum.xda-developers.com/showthread.php?t=1539752
after this download from the same post the " on screen bottons '' because the light of bottons of the arc goes off with this patch. do it if you like i have done it. here is the link http://www.mediafire.com/?g82pgwabvx80dbg
now here is what to do after installing all these things and having arc ran under KA20.1 go back to LT15i_4.1.B.0.431_Europe and flash only the KERNEL of it and nothing else or you can just flash the stock ics kernel with flashtool or fastboot but without CWM just and only the stock kernel withouuuut CWM
we are going to install CWM dont be afraid, now turn on the phone and go to the market and install from it Xperia CWM.
when it is installed open Xperia CWM on your menu and install the CWM or just follow this http://forum.xda-developers.com/show....php?t=1437840
you are done now all you have to do is desable bravia from the brightness menu and leave the baseband on 72 dont change it and you will notice a big diffirence in the battery life.
download the stock kernel that works just fine from the attachmente
if it works to you please say it.
What is the battery usage you got with this trick
2 days with usage and stuff but in sleep mode it stays where ever is it doesnt change. in usage you get less battery drain. try it your self and see
So essentially your talking about installing a Rom then using a stock kernel, which is suggested in most Rom threads for ics as Sony hadn't released the source, you'll find this change now as the source is out.
Sent from my LT18i using XDA
I see. Quite astonishing that i'd used this kind of method when flashing the KA20.1 ROM. The differences is i just re-flash back the LT18i V2 kernel, install and setup Fast Reboot and freeze some unused .apk in Link2SD. Luckily the battery is 34% after 3 days using it.
Demons Of Razgriz
LT18i KA20.1 Ice Cream Sony
LT18i V2 Kernel
My 2 cents..
I was using ICSSGS from 1st RC. But it becomes very laggy after 3-4 weeks, so factory reset every month was necessary. I decided to change ROM.
I installed DOC's v12 ( I assume is is the same Doc that was cooking ROMs for my Omnia, and I was werry pleased with those ROMs). Did wipe, cleaned cache, cleaned Dalvik, formatted /system, flashed ROM, wipe again and it was working. But after two days it was still very laggy (talking about waiting for response for 3-5 seconds) so I wanted something faster. I had choose this Openkang milestone 6.
And then the fun begins.
Downloaded, copied to sd, booted to CWM, all wipes, flashed ROM, flashed gapps and went to bootloop. 3 button combo worked only for download mode, not for entering CWM. There was no way I could access CWM. I even could not enter Android boot (don't know exactly how it is called, but it saved my TF101 more than once.)
So after 1/2 hour of unsuccessful trying to get to CWM, phone just shows logo for icyglitch kernel and went to boot again, I have seen that only option to do anything was Odin. I downloaded Odin, downloaded some 2.3.6 ROM and downloaded CWM for that rom.
First I had to find driver for phone. I remembered phone on ICS wants nexus drivers so I installed those, booted phone to download mode and flashed 2.3.6 rom with Odin.
Phone booted, boot animation was on screen, but it did not boot to working Android. I didn't care too much, just booted to download mode again, flashed CWM and now I had at least access to my sd card. Did all wipes again, flashed DOC again and went to bootloop (Icyglitch kernel logo) again.
....
So I repeated Odin procedure, and when I had working CWM I flashed good old ICSSGS 4.02. This one worked.
I had spent 4 hours to solve this problem mostly because I was not full prepared to flash.
-I had no working USB driver on PC
-I did not had Odin
-I do not have ADB installed. Even if I had it, I don't know much how to use it.
-I did not have any working 2.3.6 ROM WITH bootloader
-Nandroid backup... hmmmm... what is that? Bah, don't need it...
Luckily I flashed my phone so many times I already roughly know what to do, but I still have experienced my share of "OMGOMGOMGOMG".
My advice to new and seasoned flashers:
Don't be cocky. After million of successful flashes once will go wrong. If nothing else Murphy will kick in. And when something goes wrong, be sure that all that you need to rescue phone is on your HDD and you know WHERE it is and how to use it. And read guides. And when you finish reading read them again, then go to sleep and flash next day.
Now I'm even more satisfied with myself because I do not flash other people's phones. If it happens that I create a 400€ brick, it will be at least mine.
If this helps anyone to restore phone, click Thanks button :good:
Thankyou for being man enough to share this, I hope all noobs read this and start getting the message!
slaphead20 said:
Thankyou for being man enough to share this, I hope all noobs read this and start getting the message!
Click to expand...
Click to collapse
Lol you were faster .
I had the same problem today trying to flash aokp m6...
Got bootloop and then Odin was hanging at various points when I tried going back to stock GB.
I thought I was goosed but the good old SGS came through in the end!
Sent from my GT-I9000 using xda premium
Flashing can be frightful. I'm sure every seasoned flasher here on XDA has had their fair share of OMG moments. I know I sure have.
Future advice: after you lost recovery, you didn't need to go back to GB. Stratosk (of Semaphore Kernel) has a .tar version of his ICS kernel that can be flashed with Odin, which will then restore your CWM. This would have been a faster, simpler fix for you. Keep that in mind for next time.
I would suggest you try SlimICS the next time you get sickend of (laggy) ROM. I for one, absolutely love SlimICS, and as all, it does have some drawbacks (no lag, though) when you're pimping it out too much.
upichie said:
Flashing can be frightful. I'm sure every seasoned flasher here on XDA has had their fair share of OMG moments. I know I sure have.
Future advice: after you lost recovery, you didn't need to go back to GB. Sratosk (of Semaphore Kernel) has a .tar version of his ICS kernel that can be flashed with Odin, which will then restore your CWM. This would have been a faster, simpler fix for you. Keep that in mind for next time.
Click to expand...
Click to collapse
Too bad I didn't know that. Somehow I was convinced that no ICS rom or kernel is flashable via Odin. But Later when everything worked and I finally had time to breathe I thought that I didn't need to go to GB. I think maybe only to flash any GB CWM with Odin would be enough. All I needed was working CWM, not entire rom.
Anyway, I'll try Slim now, let's hope I won't need to rescue phone again.
I bricked my phone twice yesterday, trying to install a CM9. It was my first attempt to modify a phone. Nice start.
bpp9 said:
I bricked my phone twice yesterday, trying to install a CM9. It was my first attempt to modify a phone. Nice start.
Click to expand...
Click to collapse
Happens to everyone! 2years in and I accidentally wiped my sd card yesterday! Was a long night! It's a fast learning curve but fun when you get the hang of it!
Always brick my phone in the past, nearly one time a day
Well some tips for flashing:
- On stock ROMs, try flashing all partition firmware (i.e. 3 files in Odin) with re-partition checked before finding for help.
- Always backup you data with apps like Titanium backup, I don't usually use nandroid because it is not so flexible.
- Get GB bootloader before going to CM based ROMs, and go back to froyo bootloader if you want to have froyo back (search EzBoot for this).
- CM based ROMs and stock ROMs use a different filesystem, so flash all partition firmware before going back from CM to stock.
- Same reason, you will mostly get bootloops when going to CM ROMs. In this case, just hold the 3-button combo to enter recovery and flash it again.
- Same reason again, don't use CWM2 recovery to flash CM.
In case that anyone don't know, CM means CyanogenMod.
Hope this helps!
Sent from my GT-I9000 using xda app-developers app
tt0204 said:
Always brick my phone in the past, nearly one time a day
Click to expand...
Click to collapse
Uauuu, and you still didn't have heart attack?
I'm not sure if the fact that I managed to rescue my phone is good. Now I still don't have reason to buy SGS II.
And yes, Slim is woking, you can see my new signature. :highfive:
Managed to flash properly before I did
Wait at least until we get a working jelly bean before getting a new phone!
Sent from my GT-I9000 using xda app-developers app
slaphead20 said:
Happens to everyone! 2years in and I accidentally wiped my sd card yesterday! Was a long night! It's a fast learning curve but fun when you get the hang of it!
Click to expand...
Click to collapse
Ahaha, I did the exact same thing the day before yesterday!
Using GT-I9000 my sent Tapatalk 2 from.
First time i flashed my phone was a heart in mouth moment when it boot looped for the first 2 or 3 times.
Swore I'd never flash my phone again. Over a year later and my phone has gone through countless changes and still going strong.
The only other issue I've had with customizing my phone is telling my flatmate about it. Problem being that he doesn't quite understand the concept of 'rooting' or 'flashing'. At least not in the geek sense of the words.
Yesterday,i was reverting to stock from ics you know...And rooted JW4 with cf.then i wanted to flash semaphore's 2.7.4.I am %100 sure that there was nothing wrong.Just semaphore over cf.Did that ten times!... so here it is;
when flashing process started odin gave fail WHILE flashing zImage.not after or before.Just at the middle of flashing zImage.
I dunno why maybe that one was a random error of odin who nows....
Anyway after it said fail,phone shutted down itself from download mode..First thing that i tried,entering to recovery.But phone was not responding.No boot logo or..just black screen.
I took a deep breath.Restarted my pc while it is restarting i put out the battery from phone wait for 30sec.
Then after pc started up ,i opened odin and put the files etc etc.
Then magical thing happened
I tried directly to the d.mode it worked and flashed JVQ then got JW4 from kies
This was my story...
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
dreamer94 said:
Yesterday,i was reverting to stock from ics you know...And rooted JW4 with cf.then i wanted to flash semaphore's 2.7.4.I am %100 sure that there was nothing wrong.Just semaphore over cf.Did that ten times!... so here it is;
when flashing process started odin gave fail WHILE flashing zImage.not after or before.Just at the middle of flashing zImage.
I dunno why maybe that one was a random error of odin who nows....
Anyway after it said fail,phone shutted down itself from download mode..First thing that i tried,entering to recovery.But phone was not responding.No boot logo or..just black screen.
I took a deep breath.Restarted my pc while it is restarting i put out the battery from phone wait for 30sec.
Then after pc started up ,i opened odin and put the files etc etc.
Then magical thing happened
I tried directly to the d.mode it worked and flashed JVQ then got JW4 from kies
This was my story...
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
Actually boot directly into download mode without rebooting computer/phone will work
i know but wanted to live with that action,adrenaline
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
I think we should start a membership here. Anyone who wants to join must expirience "OMG" factor for at least 20 min. I had it 4-5 times, if I count my hassling with Omnia too.
Isn't something interesting? I mean, look at us. We flash phones, sometimes we manage to make it useless, we spend hours for rescuing them, all that time we swear to god that we will never do that again, but 5 minutes after we manage to make our phones work we are ready for next flashing. Here in Slovenia we use to say that even donkey goes on ice only once, but looks like we newer learn...
My current favorite thread, it's refreshingly honest to see people laughing at themselves, and sharing their disasters, we all do it, in fact that's why we do it! Nice to see so much humility
About not bricking other people's phones....
Right now I'm in the process of bricking my boss's phone. He wants ICS on his Dell Streak 5, even if it is only pre-alpha ... Wish me luck.