Related
hy all. i have a problem (wish): i want to install a clean rom ( i have it allready) and i want to customize it with the programs that i want to, and then, to save this rom (i supose that i have to dump it and reconstruct it) exactly with my settings/applications/etc. can i do that? if I can, how? thx alll.
When you customize your polaris on the device itself, it doesn't change the ROM on it. So dumping it will not give you a new ROM. You'll have to change the ROM on the desktop, and upload it afterwards. There are a lot of topics about ROM building.
ok. thx. i will go then to that topics. thx.
Yes but the problem is that all those posts are about porting a 6.1 rom from another device to polaris.
Now that we have a 6.1 rom how exactly do we cook it and flash it back?
Here's my problem: I have the PTG 6.1 rom, but I want to replace the CF2 with CF3.5 and replace TTN6 with TTN7, and flash it back.
I already have Kitchen 1.3, extracted the 'RUU_signed.nbh' and a dump of 03_OS.nb.payload.
Now, where do I go from here?. I want a rom that's exactly the same as the official one but with the changes I mentioned above.
I'm a complete noob at this cooking rom issue. I've read lots of threads but I've only gotten more confused about all the XIPs, SYSs, OEMs and stuff, and I think the same happens with other users.
I know that some of the actual cookers were once in the same place I'm now, so can someone point me out the rigth way and if possible post a detailed tutorial on how to extract, cook and flash back a rom on POLARIS, me and lots of users would apreciate it a LOT.
Second That Thought.
What would be nice to see (if possible) the following,
as an example:
1. Download Polaris ROM Kitchen v1.3
2. Extract to c:\Kitchen
3. Copy your ROM image (*.nbh) to X:\
4. Run command
...20. Install Package (M2D.cab) by doing the following ...
21. Recombine the ROM by doing the follow commands ...
22. Flash your ROM to your Polaris
23. Hard Reset and verify that the package you installed is in your ROM
Congrats
A step by step like that, which walks a user though the process of a demo ROM and a demo *.cab for learning would be FANTASTIC!!!
Thanks in advance to whoever can help us out!
Juxtyce
bump.
Any help from the professionals out there?
Look here:
1. .Net2.0 => .net3.5
http://forum.xda-developers.com/showpost.php?p=2685138&postcount=22
2. replace the ttn.cab file in the folder "\kitchen.work\Build\OEM\OEMAPPS" with the TomTom7 cab. If it don't have the same name, rename the new cab or edit the file 'config_AP.txt' in the same folder
hope it will help you I managed it this way.
P.S. I didn't change the XIP as mentioned in the given thread. See following posts
I will dump the wm6.1 rom for you guys, and provide you with a kitchen with some packages you can use.
I will do so for all available languages that is available with official wm6.1
But,that is gonna be quite time consuming, and I hope that you understand that I ask this in return:
Any small donation for the time I use on that will be of help.
I dont say that its required, not at all. I am not doing this for money.
But the number of hours I spend on this is getting pretty high.
I will do this project either you donate or not.
cheers
thank you a lot itje. can you make in romanian also?
dunno if it's the good topic to post but let's try.
I see many fantastic people cooking excellent roms (i wish i could do the same...), and, in those roms, a lot of softwares.
Isn't it possible to just have a rom with the bare minimum?
and seperate cabs to install what you want?
for example, manilla 2d is cool, but many people like spb mobile shell better, so it's wasted memory.
May be i'm just wrong, don't understanding how it all works, so plz explain to me !
ady_uaic said:
thank you a lot itje. can you make in romanian also?
Click to expand...
Click to collapse
if the language is available; yes
taniwha913 said:
Isn't it possible to just have a rom with the bare minimum?
Click to expand...
Click to collapse
There is a large choice of ROM's, some loaded with extra's, some very minimally equiped. There are so many that your favorite must be out there already. Just search for it.
Hello,
This is my Snapdragon ROM series.
Built with complete stock concept & Stability.
99% Bug free
ROM Overview
ROM Version: Snapdragon V1.0.0 WWE
> Release Date: 1/12/2010
> ROM BASE: LEO-3.14.
> CE OS & BUILD COM2: 5.2.21913.5.0.94
> Manila Version: Core_2_5_20181527.0
> PagePool=20 mb
> All applications from HTC.
> Use .NET Compact Framework 3.5
> Disable Sercurity , patched cert HTC
Snapdragon V1.0.0
This is a complete stock ROM for those who want to have flexibility of customization on stock ROMS.
Expect 100% performance & Stability.
This ROM is designed keeping in mind for those people who want to change to a stock ROM for language purposes but find GOLDCARD method complicated.
ATTENTION: YOU NEED HSPL ON YOUR DEVICE.
RADIO: ANY 2.x.50.xx PLEASE FLASH THE RADIO BEFORE INSTALLING THE ROM
Link to download will be added soon
**P.S. This is my first ROM, I invite all senior members to test my ROM.**
**Please Report if you find any bug**
**New & More customized Versions' of Snapdragon ROM will be Released soon**
**Please follow the thread for further updates**
SCREENSHOTS
nishantshekhar.02 said:
Hello,
This is my Snapdragon ROM series.
Built with complete stock concept & Stability.
99% Bug free
ROM Overview
ROM Version: Snapdragon V1.0.0 WWE
> Release Date: 1/12/2010
> ROM BASE: LEO-3.14.
> CE OS & BUILD COM2: 5.2.21913.5.0.94
> Manila Version: Core_2_5_20181527.0
> PagePool=20 mb
> All applications from HTC.
> Use .NET Compact Framework 3.5
> Disable Sercurity , patched cert HTC
Snapdragon V1.0.0
This is a complete stock ROM for those who want to have flexibility of customization on stock ROMS.
Expect 100% performance & Stability.
This ROM is designed keeping in mind for those people who want to change to a stock ROM for language purposes but find GOLDCARD method complicated.
ATTENTION: YOU NEED HSPL ON YOUR DEVICE.
RADIO: ANY 2.x.50.xx PLEASE FLASH THE RADIO BEFORE INSTALLING THE ROM
Link to download will be added soon
**P.S. This is my first ROM, I invite all senior members to test my ROM.**
**Please Report if you find any bug**
**New & More customized Versions' of Snapdragon ROM will be Released soon**
**Please follow the thread for further updates**
Click to expand...
Click to collapse
Welcome aboard Chef...
Need to see the screen shot before test it
Cheers...
download link... thanks..
We need the download link.
Thanks.
marcusromer said:
We need the download link.
Thanks.
Click to expand...
Click to collapse
Hello,
I'm experiencing some problems with my internet connection. The ROM will be uploaded soon.
Thank you
is ur rom ready chief? and is it actually stock rom? all stock applications are included? like world mobile card or jetcet print?
benveq said:
is ur rom ready chief? and is it actually stock rom? all stock applications are included? like world mobile card or jetcet print?
Click to expand...
Click to collapse
hello,
yes the rom is ready, but i'm having some interent issues due to.which i'm not able to upload. as soon as i get through, i'l upload the link. yes it has all d stock apps from htc. its a complete stock.rom tweaked for performance..
Hey nishant.. good 2 c a Indian chef on hd2 forum..
Will give it a try.. and provide cabs also for 5 rom start menu and other customisations.
it could be so nice if u remove copilot and provide it as a .cab file ?
bhai sahab 4 din ho gaye hai.. aab to link de doo .. ke sirf hawa kar rahe hoo
benveq said:
it could be so nice if u remove copilot and provide it as a .cab file ?
Click to expand...
Click to collapse
I would seriously consider tht in upcoming versions. The link will be available by today evening.
Hello, I bought on the german e-bay a mobile device called Acer neotouch s200, which is in german language without other languages like english, etc... I have read that if I want to get english language, I need to (re)flash it. Currently, the device has S200_3.003c.00_DE ROM. I do not know exactly if it is better to get the default ROM or the newest. To flash it, I downloaded Acer S200 beta 3 flashing tool, ran Acer_EUU.exe, but it stopped before updating the device (this was made on my desktop computer with Windows XP). I also tried it on my laptop with Windows 7, but the Acer_EUU.exe "stopped working". Can you please give me any advice how to solve my problem? I read it is better to get the default ROM, because it reduce the battery status, but it has got bugs.
Thank you
heeelp please
bry4nnn said:
heeelp please
Click to expand...
Click to collapse
heeelp please
Please do some search on this forum. This is one of the thread I found.
Quote:
benjaminchan
10th April 2010, 06:47 AM
Dear Stress Analyst,
Thanks for your helpful advice. The problem has been solved. For the benefit of those who run into the same problem, here is what I did (I am summarizing this from memory, so I may miss a few things):
- I downloaded a file called "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar". The size is 162,841,490 bytes.
- I unzipped the contents of the .rar file into a folder.
- I put the S200 in bootloader mode by pressing and holding the camera and power buttons, while pressing the reset button with the stylus. The LED started flashing red. I connected the S200 to my Windows XP SP3 desktop, and it caused the Acer HS-USB driver to be installed.
- In the aforementioned folder, I ran “Acer_Euu.exe”, and was led through a series of windows. Just click, click, click ...
- When flashed, the Arto ROM was nice and interesting on my pda, but a bit too funky for a middle-age man like me. So I decided to install the Acer update instead.
- I unzipped file “OS_Acer_3.003c.01.EN.02_WM65_A.zip” and ran file EUU_Acer_S200_3.003c.01_EN_02_03.03.08_3.003c.00_2 0100202.exe
- After flashing the updated Acer ROM, I checked the version number, which was CE OS 5.2.21883 (Build 21883.5.0.783). The earlier version was Build 21857.5.0.66. The new version seems to run faster than the old version. Here is what I think were the problems with the older version 21857.5.0.66:
- The old firmware does not do a Clean Boot very well.
- The old firmwave has problems connecting to the Acer update.
Arto's ROM overcame these two problems, which meant that I can use it as a temporary bridge to the updated Acer ROM.
Unquote..
You can try the newest Arto's rom on the 2nd thread below yours.
Unhappy
How can I change ROM Acer neoTouch S200
I have OS_ACER_3.003b.00.EN_WM65_S200
I want to change to
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_2 0100203
problem
Code
ERROR CODE = SKU_incompatible
Search.... All answers in this forum............
.....Tried to update from 3.003b to EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203
and the utility tells me SKU_incompatible .
I have in registry EN language by default.
Does anyone knows what is wrong with it?
Yes, for this "3.003c.00_EN_01" rom you should have language set ton EN_01 in your registry. ;-]
.....................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_01".
guys, do you really think that I am an idiot? I know all these steps, but I CANNOT connect the device to my laptops & PC
btw, can u copy here a DL link for "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar" ? Cannot find it
cmooon fellaz
Can you get into bootloader mode?
Version 2.1 is just the latest version during the creation of the thread. You can download other versions here.
http://www.almostunreal.org/arto/
Try follow up on this thread.
http://forum.xda-developers.com/showthread.php?t=642654&page=258
Get machine into bootloader mode, Red led flashing. Key sequence:
Camera + Volume down + Reset
Previous key sequence won't work for me. (Camera+Power+Reset)
Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
Thanks for any advice
Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.
bry4nnn said:
Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse
lnchu said:
Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.
Click to expand...
Click to collapse
ehm, your file is called "Name: OS_Acer_3.003c.01.EN.02_WM65_A.zip " which refers to a newer firmware, right? Anyway, i have to repeat myself: "I need default stock firmware, the oldest with EN" (and in my opinion it is probably called 2.003, yy?)
acer900 said:
bry4nnn said:
....
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse
For what exactly do I need this: WWE Clean and WWE MC 1.1 ? How I said, I rly do not need any CUSTOM firmware. just want to get the default firmware, not these bugged versions.
Click to expand...
Click to collapse
Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***
acer900 said:
Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***
Click to expand...
Click to collapse
u r so amusing, are not u? "custom roms are made to correct problems in the stock firmware" - yeah yeah and the bugs there are like side effects at painkillers, yeah?
And why the **** are u spamming here in this thread (now)? I wanted to get stock FW, not an advice about slow_buggy_custom_rom, cyao
I belong here, been here almost from the start of this forum and know a hell of a
lot more than you!!!! but dumb assholes like you who come to a windows mobile hacking forum to ask for advice about stock firmware don't!!
Not to mention, insulting the work of the very people you ask to help you're
sorry - wannabe - know-it-all ass will surely never get answers!!!!!
Any ideas how to get the default stock fw like it is here - http://tinyurl.com/5s5ocmh ?
I had it before with unsuitable languange (fw version was 3.003c). Now I want the same, just with english. If I use the fimwares from acer webpage then I have the same theme (& and the display is still dark, cannot change some options, etc..)
PROBLEM SOLVED
Arto made for me this stock firmware (3.003c.01.EN.02)
http://www.4shared.com/file/jJQSar1f/Stock_rom_english_S200.html
The home screen looks like this:
http://tinyurl.com/6fyfkhv
Thank you
I have taken sometime to build my own Custom ROM but then I have decided to use Alien ROM.. I started with Alien ROM Build 3 and now upgraded to Build 4..
I required arabic support, so I built this CWM based package to be flashed over Alien ROM Build #4.
Special Thanks to:
azy8000 -- For his libwebcore.so
kennethpenn -- For Alien ROM
Download link: www . multiupload . com / MIJWOTYCWR
Note: I have no previous posts thus I cannot post links, please trim the spaces from the above link to download.
First thank you. I have been waiting for this. do you know if this is going to work with this rom which was built on Alien and Aura?
http://forum.xda-developers.com/showthread.php?t=1222108
I attempted to install this anyway, i went to cmw and tried to install it from there and I got this installation abort massage.
I am not sure what framework its using. I will download it this weekend and patch its framework.
Sent from my MB860 using XDA App
seems to be working fine for me.
Thanks man, going to try now, waiting for some thing like this from long long time (since 2.2.1)
Quick question does it add only Arabic or Farsi too ???
Flashed the file, phone boots up normal, but i am unable to see any Arabization in sms.
and that's is the only thing i want to Arabiz
Noob here.
I intend on buying a bell Atrix. I need arabic support. Websites, typing, texting, that sort of thing. Rooting the Atrix, then flashing this ROM will achieve this, yes?
thank you
thank you for your offert helpfull
It will collect useful information for developers.
This theme will help us to work together and to finally workable firmware for our animal.
We kindly request all the people who will be able to find a device with a processor with us and with the support of two simkart inform us
here are the results of our work
I say in Russian user, but my goal - to attract users to develop firmware
already made several firmware versions
they were later executed and lay out the themes
If you like my work - please do not forget to say thanks!
In the course of communication will complement the topic.
request
reference for those who want to do our mite to launch network cyan7)
can ask for help in other subjects firmware devices, owners of which you were
than now to start a screeching halt with the network?
the same problem with port Leva ....
Need deodeks stock firmware files from the \ system \ framework
attempt № ...
So, what should be done next?
deodeks the \ system \ framework
this deodeksom run any of custom assemblies
deodeks will be used to launch a network of cyanogen
how? Step 1
through any deodeksator deodeksatsiyu do with API 10 - will necessarily be an error!
note on what files they are
the files that go with errors - remake with API 9
this deodeksom run any of custom assemblies
If that fails - Step 2
through any deodeksator deodeksatsiyu do withAPIs 9
this deodeksom run any of custom assemblies
this algorithm deodeksa other devaysakh with android 2.3. * and port drivers
put the logs of the work done for the analysis!
and if successful, run any custom firmware files with deodeksirovannymi - in enclosure attached archive folder deodeksirovannoy
Go for it! our success!
is one of the results http://forum.xda-developers.com/showthread.php?t=2108595
Custom firmware
To install over rekaveri
alex-rev.1
will soon publish the second
is one of the results http://forum.xda-developers.com/showthread.php?p=38062197#post38062197
Custom firmware
To install over rekaveri
[email protected]
Thks for yr rom. I am using rev3. This is great rom. But i dont like mui home.i chsnge to go launcher.it is smooth. Everythings is ok
Sent from my LG-F160K using xda app-developers app
larrylong said:
Thks for yr rom. I am using rev3. This is great rom. But i dont like mui home.i chsnge to go launcher.it is smooth.
Click to expand...
Click to collapse
trying to eliminate defects....
some of my build here is not lined
You can view the complete list of work here - http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=19780784
http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=19798091
here you can find answers to frequently asked questions
and solutions to the many problems
here is not often )
constantly on the Russian forum http://4pda.ru/forum/index.php?showtopic=294336
write in the subject - I will try to help
there can follow the news of assembly and firmware
Start new topic
decorations - http://4pda.ru/forum/index.php?showtopic=426426&view=getnewpost
This may be used http://translate.google.com
adding input languages in the firmware
wrote here http://forum.xda-developers.com/showpost.php?p=39202141&postcount=12
is one of the results http://forum.xda-developers.com/showthread.php?p=39298288#post39298288
Custom firmware
To install over rekaveri
Nahim2k7-update