alcurtis93 said:
I thought i would create a new CMW flashable zip for people on orange uk moving to Custom Roms, or even those who are on generic firmware but don't have this capibilty.
It basically enables Signal boost technology (UMA) for Galaxy S devices when in low signal areas.
This CMW zip works perfectly. This zip is tried and tested on most roms
However Give me and others feedback on if this works for you on other Rom's.
Remember this is Orange Network only!
Find the zip attached.
Just flash in recovery.
Here's an emergency link in case the xda one becomes unresponsive....
https://www.box.com/s/404ac0aba2a144a5355d
This is designed for the s2 but should work on the s3. Please let me know!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Didn't work when posted in s1 forum, hoping it will when my s3 arrives.
Sent from my GT-I9000 using xda premium
Wow - this should be excellent! I was disappointed it wasn't compatible with signal boost out of the box!!
Has anyone tried this on an S3 yet?
LoveJimbo said:
Wow - this should be excellent! I was disappointed it wasn't compatible with signal boost out of the box!!
Has anyone tried this on an S3 yet?
Click to expand...
Click to collapse
This if it doesn't work can be tweaked to work. I shall be getting the s3 soon and so will have a play. But if people can try it that would be great
Sent from my GT-I9100 using xda premium
I would try but sadly on o2. Not complaining though signal is fantastic but the want for more is still there
Sent from my GT-I9300 using Tapatalk 2
Can anyone confirm if this works on the S3? Bought this S3 today after being told instore that it features the Signal Boost software only to get it home and find out I had been lied to . Signal at home is terrible. So I'll have to take the phone back if I can't get this sorted.
lukey-windy said:
Can anyone confirm if this works on the S3? Bought this S3 today after being told instore that it features the Signal Boost software only to get it home and find out I had been lied to . Signal at home is terrible. So I'll have to take the phone back if I can't get this sorted.
Click to expand...
Click to collapse
I have just flashed this onto my S3 however no signal boost appears to have been installed. Unless I have done something wrong then I can confirm that it does not work for the S3.
---------- Post added at 08:15 AM ---------- Previous post was at 08:04 AM ----------
lukey-windy said:
I have just flashed this onto my S3 however no signal boost appears to have been installed. Unless I have done something wrong then I can confirm that it does not work for the S3.
Click to expand...
Click to collapse
Ok, so I have managed to install the app by extracting the package and installing the apk. However when I open the signal boost app it immediately force closes.
lukey-windy said:
I have just flashed this onto my S3 however no signal boost appears to have been installed. Unless I have done something wrong then I can confirm that it does not work for the S3.
---------- Post added at 08:15 AM ---------- Previous post was at 08:04 AM ----------
Ok, so I have managed to install the app by extracting the package and installing the apk. However when I open the signal boost app it immediately force closes.
Click to expand...
Click to collapse
If you could extract the apk and put it in /system/app
Extract the lib files and put them in /system/lib and then extract the .prop file and put it in /system and then let me know.
Sent from my GT-I9100 using xda premium
alcurtis93 said:
If you could extract the apk and put it in /system/app
Extract the lib files and put them in /system/lib and then extract the .prop file and put it in /system and then let me know.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ok. I'll try that now mate. I presume that you have the app fully working? I'd be ovr the moon.
Ok, so I've managed to get the app installed and openable. I have enabled signal boost and I have the orange house icon in the top left of the screen however I am unable to make calls when I have no mobile network coverage. It seems that the app isn't correctly routing the calls.
Just to warn you, this app causes crazy wake locks and ruins of battery life, only use it if you really need to!
Sent from my GT-I9300 using Tapatalk 2
Lennyuk said:
Just to warn you, this app causes crazy wake locks and ruins of battery life, only use it if you really need to!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I'm getting somewhere now. I can now get the green house icon to turn green which gives me a "signal boost". Great for texting, however when I make or receive a call the signal and or app just drops leaving me with no signal. It then restarts after about a minute and goes green again. Any suggestions?
Bump i would like to use this, or is there a orange stock rom with it on?
lukey-windy said:
I'm getting somewhere now. I can now get the green house icon to turn green which gives me a "signal boost". Great for texting, however when I make or receive a call the signal and or app just drops leaving me with no signal. It then restarts after about a minute and goes green again. Any suggestions?
Click to expand...
Click to collapse
Hmm. Im getting an s3 in the next few weeks so then I can definately work on it. Its strange texts work but calls don't
Sent from my GT-I9100 using xda premium
alcurtis93 said:
Hmm. Im getting an s3 in the next few weeks so then I can definately work on it. Its strange texts work but calls don't
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I look forward to you starting work on it mate. It is very strange indeed. When making or receiving calls then app just crashes and restarts.
My hope is that orange soon release a version with signal boost in so that I don't have to start writing code and can just tear the files straight out. Fingers crossed
Sent from my GT-I9100 using xda premium
alcurtis93 said:
alcurtis93 said:
I thought i would create a new CMW flashable zip for people on orange uk moving to Custom Roms, or even those who are on generic firmware but don't have this capibilty.
It basically enables Signal boost technology (UMA) for Galaxy S devices when in low signal areas.
This CMW zip works perfectly. This zip is tried and tested on most roms
However Give me and others feedback on if this works for you on other Rom's.
Remember this is Orange Network only!
Find the zip attached.
Just flash in recovery.
Here's an emergency link in case the xda one becomes unresponsive....
https://www.box.com/s/404ac0aba2a144a5355d
This is designed for the s2 but should work on the s3. Please let me know!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Will this work on Galaxy note n7000?
Click to expand...
Click to collapse
krypton_the_slayer said:
alcurtis93 said:
Will this work on Galaxy note n7000?
Click to expand...
Click to collapse
Should do. It may need extracting and the files putting in place first. You need to be running a custom kernel preferably.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
krypton_the_slayer said:
alcurtis93 said:
Will this work on Galaxy note n7000?
Click to expand...
Click to collapse
Should do. It may need extracting and the files putting in place first. You need to be running a custom kernel preferably.
Sent from my GT-I9100 using xda prmium
Click to expand...
Click to collapse
krypton_the_slayer said:
alcurtis93 said:
Will this work on Galaxy note n7000?
Click to expand...
Click to collapse
Should do. Try it for us. I ideally need these devices to get it to work but there's no chance of that.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Related
Ever since installing android I've been having signal issues. Sometimes ill just lose signal for like. 30seconds then it will all be fine. Or other times ill have full bars 3G but yet the notification bar and lockscreen say no service and because it says no service my cell stand by is height battery even though there's signal. And this happened on different Roms and I have the latest radio.
What can I do?
This is a known issue. Unfortunately, it doesn't seem like it's a big deal to the developers. I've seen a couple threads posted here in the general section about it but have never seen anything where a dev has addressed the problem. Who knows, maybe they are just working on it behind the scenes.
mmduluth said:
This is a known issue. Unfortunately, it doesn't seem like it's a big deal to the developers. I've seen a couple threads posted here in the general section about it but have never seen anything where a dev has addressed the problem. Who knows, maybe they are just working on it behind the scenes.
Click to expand...
Click to collapse
Would you be kind enough to list those couple of threads?
Sent from my HD2 Droid HD using XDA App
jose makalolot said:
Would you be kind enough to list those couple of threads?
Sent from my HD2 Droid HD using XDA App
Click to expand...
Click to collapse
i to have been having the same problem and was recommended to update to the newest radio version, which has done nothing, and im running Nexus HD2-froyo v1.9g nand with 2.15.50.14 radio version. if you find a fix please post one and i will do like wise
jdmhatchy94 said:
i to have been having the same problem and was recommended to update to the newest radio version, which has done nothing, and im running Nexus HD2-froyo v1.9g nand with 2.15.50.14 radio version. if you find a fix please post one and i will do like wise
Click to expand...
Click to collapse
Sorry but I don't have such issue. I am using 2.12.50.x
Sent from my HD2 Droid HD using XDA App
Is it possible for me to downgrade from my current radio version?
Sent from my Nexus One using XDA App
jdmhatchy94 said:
Is it possible for me to downgrade from my current radio version?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Of course. Just enter bootloader.
Ok sweet imma attempt that now i ty sir
Sent from my Nexus One using XDA App
i went to go download the recommended radio version from (http://forum.xda-developers.com/showthread.php?t=611787) and when i download and unzip file it shows up as leo_radio_15.40.50.07u_2.12.50.02_2.nbh
is there something im missing or do you have a link to download the right file
jdmhatchy94 said:
i went to go download the recommended radio version from (http://forum.xda-developers.com/showthread.php?t=611787) and when i download and unzip file it shows up as leo_radio_15.40.50.07u_2.12.50.02_2.nbh
is there something im missing or do you have a link to download the right file
Click to expand...
Click to collapse
leo_radio_15.40.50.07u_2.12.50.02_2.nbh is the radio itself...
what are you trying to look for?
jose makalolot said:
leo_radio_15.40.50.07u_2.12.50.02_2.nbh is the radio itself...
what are you trying to look for?
Click to expand...
Click to collapse
then why doesnt it come up as CustomRUU.exe when i try to run the other radio it asks me to select a program from my computer to run it
jdmhatchy94 said:
then why doesnt it come up as CustomRUU.exe when i try to run the other radio it asks me to select a program from my computer to run it
Click to expand...
Click to collapse
get a customruu.exe from roms or builds and put it in the same folder as leo_radio_15.40.50.07u_2.12.50.02_2.nbh then click customruu.exe.
If you don't have a copy of customruu.exe then search button or google will help you.
jose makalolot said:
get a customruu.exe from roms or builds and put it in the same folder as leo_radio_15.40.50.07u_2.12.50.02_2.nbh then click customruu.exe.
If you don't have a copy of customruu.exe then search button or google will help you.
Click to expand...
Click to collapse
damn your good lol i appreciate your fast responses sir thank you. i am dl the radio version now ill see how it does
dino1394 said:
Ever since installing android I've been having signal issues. Sometimes ill just lose signal for like. 30seconds then it will all be fine. Or other times ill have full bars 3G but yet the notification bar and lockscreen say no service and because it says no service my cell stand by is height battery even though there's signal. And this happened on different Roms and I have the latest radio.
What can I do?
Click to expand...
Click to collapse
Well, i used 2 have such issues before so here's what i did....Upgraded to d latest radio & then went into Settings > Mobile networks, i then changed network connection from "Auto" to "GSM only"...That stabilized my network, i still get great data speeds so i'm gud....
Most times its not a problem of the build, its more lyk your location (cell towers) and the phone trying to give you a better network by switching between GSM & WCDMA connections...
P.S. Try using GSM or WCDMA only mode n see which works best for you.
Wow that also worked i put my connection to run 2g and wifi and it shot me straight up to 4 bars
Sent from my Nexus One using XDA App
jdmhatchy94 said:
Wow that also worked i put my connection to run 2g and wifi and it shot me straight up to 4 bars
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Glad i could be of assistance....
jdmhatchy94 said:
Wow that also worked i put my connection to run 2g and wifi and it shot me straight up to 4 bars
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
And with that no doubt your battery consumption also improved dramatically
jdmhatchy94 said:
Wow that also worked i put my connection to run 2g and wifi and it shot me straight up to 4 bars
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
You know that signal bar shows 3.5g>3g>2g? So if you choose auto it shows 3.5g first, if ever possible, then so on and so forth. So even if you have 4bars 2g then 1bar 3g, it will show 1bar on the signal bar.
Sent from my HD2 Droid HD using XDA App
Wow alotta responses fast lol. Thanks everyone. Now with the radio are there specific ones that should be used with the tmous hd2?
dino1394 said:
Wow alotta responses fast lol. Thanks everyone. Now with the radio are there specific ones that should be used with the tmous hd2?
Click to expand...
Click to collapse
Yep, Check out radios here...D one on my signature works beautifully for most & i would recommend it.
Hi all just thought id share, and let everyone know that the app in the market made by gokhanmoral does work on the note2, mine being the N7100 so all credits go to him for his work :good:
no need to change build.prop if your unsure how, his app does work on the note 2
here is his full explanation guide on this site:
http://www.androidnz.net/2012/06/at-your-own-risk-how-to-disable-fast.html
And to the app:
https://play.google.com/store/apps/details?id=com.gokhanmoral.fastdormancytoggle.i9300&hl=en
Thanks
Sent from my iPhone using Tapatalk
Just tried this as O2 don't support Fast Dormancy, however I get the following nessage:
CitizenLee said:
Just tried this as O2 don't support Fast Dormancy, however I get the following nessage:
Click to expand...
Click to collapse
This worked for me on the sgh-I317M note 2 here in Canada with rooted stock as I mentioned also in root acquired thread in Att note 2 General forum
Sent from my SGH-I317M using Tapatalk 2
I have an N7100 in Canada on Rogers, pretty sure they don't support Fast Dormancy.. Does switching this off create any benefit?
tawheed12 said:
I have an N7100 in Canada on Rogers, pretty sure they don't support Fast Dormancy.. Does switching this off create any benefit?
Click to expand...
Click to collapse
Your correct Rogers network doesn't support fast Dormancy yet
Sent from my SGH-I317M using Tapatalk 2
tawheed12 said:
Does switching this off create any benefit?
Click to expand...
Click to collapse
More stable data connection and better battery life.
Just a note for those having the sqlite write error. You are likely using the perseus kernel. For some reason the database has a different group when using perseus. You can just add r/w to 'other' to get around the issue (the permissions reset on reboot).
Another note, the program specified above doesn't always detect the correct current network (aka, mine is 31000 and it detected 31100), and so the sqlite rows entered don't always work.
Final note: Disabling FD isn't usually a good thing. Be very sure the network you are on doesn't support FD, in any of its forms, else you will get slow connect times and much worse battery life by having it disabled.
turilo said:
Your correct Rogers network doesn't support fast Dormancy yet
Sent from my SGH-I317M using Tapatalk 2
Click to expand...
Click to collapse
Jade Eyed Wolf said:
More stable data connection and better battery life.
Click to expand...
Click to collapse
Thanks!
CitizenLee said:
Just tried this as O2 don't support Fast Dormancy, however I get the following nessage:
Click to expand...
Click to collapse
Same to me...stock rom root and cwm added...i don t know i can work this app...
Please someone provide the contents in screenshot of nwk_info.db dormpolicy table for unmodified international version. I don't think that disable dormancy in this program reverts all changes.
Thank you.
Acorns said:
Just a note for those having the sqlite write error. You are likely using the perseus kernel. For some reason the database has a different group when using perseus. You can just add r/w to 'other' to get around the issue (the permissions reset on reboot).
Another note, the program specified above doesn't always detect the correct current network (aka, mine is 31000 and it detected 31100), and so the sqlite rows entered don't always work.
Final note: Disabling FD isn't usually a good thing. Be very sure the network you are on doesn't support FD, in any of its forms, else you will get slow connect times and much worse battery life by having it disabled.
Click to expand...
Click to collapse
Andy clue how to make it work in Perseus Kernel?
Not work with RedPill kernel.
Sent from my GT-N7100
The first thing everyone should be doing is checking if their networks supports FD or not, and if they do then you should leave it alone.
I know O2 in the UK do not support it, which is why I wanted to disable it.
This is how I got it working:
-Flash ROM / kernel via recovery
-Open Galaxy Note Toolbox (link in Dev section)
-Choose option to root and install busybox
-Run FD app
For me this worked on Perseus and RedPill, tested with ARHD, however others users have reported that it didn't work for them.
I'm actually on Omega at the moment and had forgotten to do this so my FD app is currently giving me the SQL error. I'll fix it later though, at work right now
CitizenLee said:
Just tried this as O2 don't support Fast Dormancy, however I get the following nessage:
Click to expand...
Click to collapse
If you get this error, reinstall busybox.
Sent from my GT-N7100 using xda premium
onslaught86 said:
If you get this error, reinstall busybox.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Only worked for me when I used Galaxy Note 2 Toolbox to reinstall, as I described above.
I flashed new NEAK kernel last night and it didn't break the FD app... loaded it up and no SQL error
Didn't there use to be a special code you could type into your phone to enable a secret menu that would then let you switch fast dormancy off? I remember doing this to an old smartphone a couple of years ago.
Sent from my Nexus 7 using Tapatalk 2
simacca said:
Didn't there use to be a special code you could type into your phone to enable a secret menu that would then let you switch fast dormancy off? I remember doing this to an old smartphone a couple of years ago.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, but it doesn't work on GN2
CitizenLee said:
Yeah, but it doesn't work on GN2
Click to expand...
Click to collapse
Thats a shame
Sent from my GT-N7100 using Tapatalk 2
onslaught86 said:
If you get this error, reinstall busybox.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
This worked for me using Omega 8. Got the error then reinstalled.
A little place to discuss about this phone, other Samsung phones or other stuff without spamming the forum too much
Now, did anyone expected this?
www.androidpolice.com/2012/12/17/sa...hone-that-looks-a-whole-lot-like-the-note-ii/
Sent from my GT-I8190 using xda app-developers app
Great now we have an OT
And on grand its nothing impressive though came as a complete surprise !
leap before you think
Finally that someone posted here
Sent from my GT-I8190 using xda app-developers app
ppero196 said:
Finally that someone posted here
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Count on me and you will never be disappointed
et too brute !
Re: OT Area
Can anyone help me with something?
I need to see how the Nature UX UI looks like since I am making a theme for our phone. Can anyone please replicate the following pictures? I want to see how it looks like on your jelly bean phones... Thank you so much.!
Also, the popup that appears when you change media volume.
Any help is much appreciated.
Re: OT Area
Dr01nE said:
Can anyone help me with something?
I need to see how the Nature UX UI looks like since I am making a theme for our phone. Can anyone please replicate the following pictures? I want to see how it looks like on your jelly bean phones... Thank you so much.!
Also, the popup that appears when you change media volume.
Any help is much appreciated.
Click to expand...
Click to collapse
Here you go (zip archive).
Altough system language is Croatian, its looks exactly like that in english language.
http://db.tt/vKC3hGxR
Sent from my GT-I8190 using xda app-developers app
Re: OT Area
ppero196 said:
A little place to discuss about this phone, or other Samsung phones without spamming the forum too much
Now, did anyone expected this?
www.androidpolice.com/2012/12/17/sa...hone-that-looks-a-whole-lot-like-the-note-ii/
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Its an ok device.. But the screen resolution is too low for that screen size...
Sent from my GT-I8190N using xda app-developers app
Does firmware 4.1.2 allow support for multi window? I read somewhere that it does, along with a new gallery. Is this true?
Re: OT Area
Count_Chocula said:
Does firmware 4.1.2 allow support for multi window? I read somewhere that it does, along with a new gallery. Is this true?
Click to expand...
Click to collapse
No it doesnt... maybe in 4.2 update..
Sent from my GT-I8190N using xda app-developers app
so i got my s3 mini from a friend studying in dubai
phone was brand new in the box
looked legit
had all the right hardware specs and software and all packaged as expected
however
started looking at a few things in details for example the imei
there are a few websites where you can query your imei and see what output it gets
mine showed some other brand and model of phone
leading me to believe my phone is one of those cheap replicas
and yet the look and feel and performance seems legit
Re: OT Area
Give me screenshot of About Phone settings.
Complete
Sent from my GT-I8190 using xda app-developers app
ok will do
travelling at the moment, will send you a screen shot as soon as i can via pm
forum problem
Greetings all!
I am having a slight problem with the forum. I can't seem to stay logged in all the time, even if the box is ticked. From time to time I must reenter my credentials, and that is a [first world problem] I know but is there something others has experienced or is it just me?
On the side note, this occurs in latest stable Chrome, latest dev build chrome, as well as latest stable FireFox.
I never click the link to log out, I just close the tab/window. And it appears to be quite random too, that I must reenter my credentials.
Thoughts? Solutions?
Re: OT Area
broman.m said:
Greetings all!
I am having a slight problem with the forum. I can't seem to stay logged in all the time, even if the box is ticked. From time to time I must reenter my credentials, and that is a [first world problem] I know but is there something others has experienced or is it just me?
On the side note, this occurs in latest stable Chrome, latest dev build chrome, as well as latest stable FireFox.
I never click the link to log out, I just close the tab/window. And it appears to be quite random too, that I must reenter my credentials.
Thoughts? Solutions?
Click to expand...
Click to collapse
why dont you just download the xda app in the market? it will keep you updated to our forum and also hassle free about that relog in issue
Sent from my GT-I8190 using xda app-developers app
Re: OT Area
Permission to join the thread
Sent from my SGS III Mini using XDA
Re: OT Area
kuroiraida said:
Permission to join the thread
Sent from my SGS III Mini using XDA
Click to expand...
Click to collapse
You don't need permission
Sent from my GT-I8190 using xda app-developers app
Re: OT Area
Just realized that Adaway, Adfree Adblock plus etc. has removed from Play Store. Weird :what:
Re: OT Area
ztandroid said:
Just realized that Adaway, Adfree Adblock plus etc. has removed from Play Store. Weird :what:
Click to expand...
Click to collapse
They were removed weeks ago.
Devs have apks on their webpages
Sent from my GT-I8190 using xda app-developers app
Re: OT Area
ppero196 said:
They were removed weeks ago.
Devs have apks on their webpages
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Aaaah..I see..:beer:
Sent from my Samsung Golden
Re: OT Area
uits one of the latest google moves...it removed all ad blocking app from their store...
please hit THANKS if I helped
sent from somewhere and somehow by the wonderful s3 mini
Nobody has seen this yet? Finally available.
http://phandroid.com/2013/06/27/att-galaxy-tab-2-10-jelly-bean/
I check faithfully everyday. Downloading it now OTA. Came here to report it but gokartracer5 is already on top of the update. :victory: It better be JB. :fingers-crossed:
Updated it last night, still trying to find the right file to root with.
UPDATE: I'm rooted! Good to go!
Someone posted the root method in the development thread. It works.
Sent from my SAMSUNG-SGH-I337 using xda premium
gokartracer5 said:
Someone posted the root method in the development thread. It works.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I just wish there was a reliable CWM recovery touch for this variant.
Also, maybe it's just me, but I have to say that, for all of the cries from people for JB, I've really not noticed much of a difference since the update.
Yeah, it has to be the smallest changelog I have ever seen.
Agoattamer said:
Yeah, it has to be the smallest changelog I have ever seen.
Click to expand...
Click to collapse
It isn't as though I had any problems with the tablet before, except for some occasional lag, but, except for the icons and some minor cosmetic changes, I haven't noticed anything to distinguish it from ICS.
Of course, I'm grateful that they're at least updating it. Especially since there would be so many people crying if they didn't.
Maybe I'm too oblivious to notice the changes.
Sent from my Samsung Galaxy S III using Tapatalk.
Changes that I know of are:
Google Now
AT&T AllAccess Widget
Smart Stay
Agoattamer said:
Changes that I know of are:
Google Now
AT&T AllAccess Widget
Smart Stay
Click to expand...
Click to collapse
Wow. Nothing there that I use or couldn't live without. Still, that'll keep the zealots quiet for at least a while, LOL!
Sent from my Samsung Galaxy S III using Tapatalk.
Wasn't this release supposed to include Project Butter?
I just noticed something that has been changed that I don't like: in the settings from the taskbar you used to be able to turn mobile data on and off, and now that button is gone and I can't figure out how to get it back.
Sent from my Samsung Galaxy Tab 2 10.1 using Tapatalk.
Technically doesn't airplane mode do just about the same thing on this tablet? Unless you have found a use for the phone signal.
Agoattamer said:
Technically doesn't airplane mode do just about the same thing on this tablet? Unless you have found a use for the phone signal.
Click to expand...
Click to collapse
The way I see it, the mobile data radio button was most handy so that I could make sure I was not using my data plan when WiFi was on. I preferred having this feature, and I have noticed a difference in the past when I thought I was using WiFi only to learn I wasn't. Maybe you don't think it was useful, but I certainly found it to be very much so. Now I have to drill down into the settings to manually turn off mobile data instead, which is a pain.
Besides, airplane mode usually shuts off Bluetooth, GPS, mobile data, and WiFi, or at least it has on nearly every device I've ever owned. In other words, from a practical standpoint: baby with the bathwater.
Sent from my Samsung Galaxy Tab 2 10.1 using Tapatalk.
I guess you are right. Airplane mode does shut off way too much. How about adding a data toggle from the Play Store?
Agoattamer said:
I guess you are right. Airplane mode does shut off way too much. How about adding a data toggle from the Play Store?
Click to expand...
Click to collapse
Shouldn't have to, that button was a perfect solution, I wish I knew why it was removed, there really was no need for it to go.
Oh well.
Sent from my Samsung Galaxy Tab 2 10.1 using Tapatalk.
Smart stay isn't working for me, anyone else?
Sent from my SAMSUNG-SGH-I497 using xda app-developers app
Jorge81 said:
Smart stay isn't working for me, anyone else?
Sent from my SAMSUNG-SGH-I497 using xda app-developers app
Click to expand...
Click to collapse
Works for me but only when I am in bright light and have the tab perpendicular to my face for it to pick up my eyes.
Agoattamer said:
Works for me but only when I am in bright light and have the tab perpendicular to my face for it to pick up my eyes.
Click to expand...
Click to collapse
It's been working for me just fine, no matter what angle I have the tablet at, and I wear glasses.
Sent from my Samsung Galaxy Tab 2 10.1 using Tapatalk.
Any chance someone with this Rom and Root could extract and post the AllAccess APK?
Should be in /system/app/
I highly recommend a hard reset after updating to 4.1.
I didn't the first time and it was super laggy and buggy. After formating, it's smooth now.
Every single AOSP ROM I have tried to flash, 3g does not work. On every single one.
What am I doing wrong? I've tried probably 5 ROMs..
I'm just really frustrated with myself and I can't figure out what I'm doing wrong, so finally I have decided to make a post!
DustCrow said:
Every single AOSP ROM I have tried to flash, 3g does not work. On every single one.
What am I doing wrong? I've tried probably 5 ROMs..
I'm just really frustrated with myself and I can't figure out what I'm doing wrong, so finally I have decided to make a post!
Click to expand...
Click to collapse
Are you on a 3rd party carrier other than sprint?
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Are you on a 3rd party carrier other than sprint?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
No I am on sprint.
DustCrow said:
No I am on sprint.
Click to expand...
Click to collapse
try flashing your radios/modem via odin
DustCrow said:
No I am on sprint.
Click to expand...
Click to collapse
Did you try changing your network mode? I have had issues with 3g before and changing network mode fixed my problem. Also once you DL the roms you are having problems with have you looked at about device to see if you have a baseband /software version?
Sent from my SPH-L720 using Tapatalk
ParkerParker said:
Did you try changing your network mode? I have had issues with 3g before and changing network mode fixed my problem. Also once you DL the roms you are having problems with have you looked at about device to see if you have a baseband /software version?
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
also make sure network info in there
When you say 3g doesn't work, do you mean that you're phone's status bar never shows 3g service or does it show 3g with a signal bar or two and you can't pull any data services over it. If it shows 3g with no actual data services run the ookla speedtest.net app and let us know what the results of that are.