Related
Hi everybody,
First, sorry for my poor english, i try to explain the best i can.
My HD2 is on one of the first Phone 7 release 01/2011 ago.
I want go back on stock rom, cause recently, i've a bug, my phone can't boot. It stay on Phone7 logo and next reboot.
Without my SD card, the phone boot, but it's in english, and My computer recognyze it on " Windows Phone7 " with yellow exclamation point.
I've tried to flash 6.5 stock rom with usb cable, but it's said it can't connect the device.
To go on flash screen, i push reboot+power off+ vol down button. Next on emagldr 1.13 screen, i select "5.usb flasher".
Next i can check on my computer's now recognyzed as " Microsoft USB Sync", but the stock rom still not abble to work:" no phone response, check usb cable"
I'm sure that my usb cable is working.
Any suggestion ?
You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.
tictac0566 said:
You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.
Click to expand...
Click to collapse
Thanx for your answer, i think the bug is here i cannot enter normal tri-color bootloader, it doesnt work :s
When i do power+ vol down until the device start, i first have a blank Htc screen maybe 1sec, and quikly next boot menu from MAGLDR 1.13
However, i'm sure that my Vol Down button work, it works on magldr menu.
try pulling out the battery, then hold down the two volume buttons, as hard as you can safely get away with, pop the battery back in whilst still holding buttons down, if it doesnt start tap the power button. keep holding down the buttons through out the whole process until it comes on.
if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...
sb2003 said:
if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...
Click to expand...
Click to collapse
except he hasnt been able to get in to the bootloader as the previous posts to your suggest
dazza9075 said:
except he hasnt been able to get in to the bootloader as the previous posts to your suggest
Click to expand...
Click to collapse
huh, must be that i'm blind missed it completely
Thx for taking time to help me,
So, if i push vol up and down, i 've a screen, next the screen loading wph 1,2,3,4 Go.
I read on it "This operation will 1.delete all your personal data, and reset all setting to manufacturer default. 2. Calculate CRC checksum. Press Voldown to restore manufacturer default, or press Vol Up to get CRC, or press other keys to cancel".
But,
Nothing happend if i press vol down, or volUp or other buttons :s
Maybe we've to try another way to get into bootloader, i think my poor batterie level is bugging the bootloader.
So, I known that we can't acces bootloader via windows.
I'm on Seven x64, my hd2 is recognyzed as a phone7 Device, with a yellow "!".
If i launch HSPL 4, with administrator right, and XP SP2 compatibility level, it can't acces via USb. " no response".
Any suggestions ? May i change the driver?
right, well that proves the buttons are working, i think its just a case of not having them held in at the right time
pop the battery out, hold down the vol down button on its own and keep it held down, put the battery back in and if it doesnt restart tap the power button.
dont let go of the vol down button
Yep, i've done this maybe 30 or 40 times, no way, no bootloader.
I4ve found a thread that explain to fullu charge the battery, remove it and wait 24H before, do the operation ( vol down, putt battery still vol down, push power stil vol down) No way, this doesn't work :s
So i've order a new battery, maybe it'll resolve the problem, i hope. See when it arrive.
Oh dear, well if you definitely cant get in to bootloader and the keys do work then that's a problem, I doubt a battery will fix it but id be interested in knowing if it does work, good luck! Is been reading quite a bit about fixing devices via the wee metal points inside devices, I wonder I the points inside the hd2 will allow this...
Sent from my HD2 using XDA Windows Phone 7 App
I'm not sure i've understand all your reply Dazza, are u suggesting to check the 3 pin connector baterry on my HD2 ?
If it's this, i've already check this, the 3 pin are good, and i've put a graphyte electrical dust on it to improve the contact.
Nope, I mean if you pop the battery cover off there are 3 metal connectors next to the sim card, it seems on some devices people have found similar points and managed to connect the device to a serial port on a pc, then had direct access to the device bypassing the bootloader. I don't think anyone done this for the hd2 yet but apparently this will fix a completely bricked device
Sent from my HD2 using XDA Windows Phone 7 App
Ok ! Maybe if the new battery won't resolve, i'll try something like that
Its complicated an as far as i know its not been done for the hd2, im not even sure that's the correct points but its a possibility. There are another 2 points on the opersite side to the volume buttons under the battery cover.
Sent from my HD2 using XDA Windows Phone 7 App
Please help me.. i load font changer from android market to my device and add fonts to my sd cart.. After that i select my new fonts to the list and it reboot my device now i can not turn on my htc.. Please help me.. how can get my pda the back.. I'm sorry for my english.. :s
crayz61 said:
Please help me.. i load font changer from android market to my device and add fonts to my sd cart.. After that i select my new fonts to the list and it reboot my device now i can not turn on my htc.. Please help me.. how can get my pda the back.. I'm sorry for my english.. :s
Click to expand...
Click to collapse
When you mean cannot turn on, does it not switch on at all or does it not boot to Android?
What loader do you use - Magldr or cLK? Try plugging in to the charger. If it is it Magldr, the phone should boot up, if it is cLK it should show the charging light (let it charge for sometime, then unplug the charger and try to power on).
If it is powering on but not loading Android, try to restore a backup in clockworkmod (if you took a backup), else start from scratch - press down the vol down, power on, task 29, flash magldr...
i can turn on my phone but cannot load the android.. it stuck on loading screen and then i remove its batary and close the phone.. before this problem i installed the font changer my phone and ghange my fonts i think this problem based on this programs and my changec fonts.. Please help me and get my htc back..Im using MagLDR.. Please explain and show the solving methods step by step..
crayz61 said:
i can turn on my phone but cannot load the android.. it stuck on loading screen and then i remove its batary and close the phone.. before this problem i installed the font changer my phone and ghange my fonts i think this problem based on this programs and my changec fonts.. Please help me and get my htc back..Im using MagLDR.. Please explain and show the solving methods step by step..
Click to expand...
Click to collapse
with the phone off, press and hold the power button.
Choose AD Recovery (scroll with vol keys, select using the make call/ answer key). This will load clockworkmod.
In CWM, choose mounts and storage, and mount USB drive
Copy your current ROM's zip file to the USB drive from the computer (download it if required)
Go back to CWM main menu, install zip from sd card, choose zip from Sd card.
After flashing is over, reboot and see if it works...
Swyped from my HTC HD2 running CM7 (Gingerbread 2.3.5)
Anyone who can help me please?
Running Hyperdroid 3.0.1 CM7 its been working fine
lately a few minor software issues then today when i pressed the lockscreen/hang up button once it was working as if i had long pressed it
so i rebooted, and it got stuck on the bootscreen android logo..
ive tried options in the mgldr menu but nothing!
anyone that can help at all will be saving me thanks
What all have you tried to do to correct the issue besides rebooting the device? Have you tried flashing a new ROM, task 29 and start from scratch, restore from a NANDroid backup made with Clockwork Mod Recovery before the issue arouse. These or some of the things you can try. But just tro let you know you may be facing bad blocks in your NAND, but this is the worst case scenario. I say this because you said the following.
liam.ire said:
lately a few minor software issues then today when i pressed the lockscreen/hang up button once it was working as if i had long pressed it
Click to expand...
Click to collapse
The few minor software issues could have been the early signs of blocks in the NAND going bad.
Thanks for the reply!
Ok the only thing i can do is load MGLDR 1.1.3 by holding volume+ and on
in that menu option 2. (boot ad sd) says the kernal wont open
but im loading from nand i think so probably doesnt apply?
option 4. USB mass storage works fine
ad recovery says go!go!go! but nothing pc side
USB flasher says go!go!go! and is seen on my pc as removable device 'MGLDR'
what should you advise i do first? thanks again your really helping me i feel like theres no hope!
liam.ire said:
Thanks for the reply!
Click to expand...
Click to collapse
No problem you are very welcome.
liam.ire said:
Ok the only thing i can do is load MGLDR 1.1.3 by holding volume+ and on
Click to expand...
Click to collapse
I think you meant to say by holding the volume down and power button as this is how you boot into the bootloader.
liam.ire said:
in that menu option 2. (boot ad sd) says the kernal wont open
but im loading from nand i think so probably doesnt apply?
Click to expand...
Click to collapse
You are correct option #2 boot ad sd is to boot Android from SD card. It also use to be for booting into Clockwork Mod Recovery back when you had to have two of the files for Clockwork Mod Recovery on your SD card.
liam.ire said:
option 4. USB mass storage works fine
Click to expand...
Click to collapse
Well this tells you that MAGLDR is functioning correctly with this option and your PC is able to communicate with MAGLDR.
liam.ire said:
ad recovery says go!go!go! but nothing pc side
Click to expand...
Click to collapse
liam.ire said:
USB flasher says go!go!go! and is seen on my pc as removable device 'MGLDR'
Click to expand...
Click to collapse
Again this shows communication between your PC and MAGLDR.
liam.ire said:
what should you advise i do first? thanks again your really helping me i feel like theres no hope!
Click to expand...
Click to collapse
Unless your HD2 is Hard Bricked and needs to be JTAGed or you have bad blocks in the NAND memory there is always hope.
Again I have to ask have you tried running a Task 29 and then re install MAGLDR and then re flash Clockwork Mod Recovery and do either a fresh install of the Hyperdroid or use a NANDroid backup you made before running the TASK 29. You can also use the HD2 NAND Toolkit to run the Task 29 and re install MAGLDR.
lovely thank you for the links! one noob question what mode in MGLDR should i use when running task 29.exe?
AD recovery/USB flasher or USB TTY ?
The video tut of task29 says you need to be in active sync? but i can only get to mgldr
liam.ire said:
The video tut of task29 says you need to be in active sync? but i can only get to mgldr
Click to expand...
Click to collapse
ActiveSync is the program that Windows XP and earlier use to communicate with Windows Mobile Devices. Vista and 7 use Windows Mobile Device Center (WMDC)
Boot your phone into the tri-color bootloader screen, and run task29 on your computer once the computer has shown that it is connected to your phone. Your phone won't connec to ActiveSync or WMDC while in bootloader, but you ought to be able to run task29 anyways, as long as your comp recognises your phone and connects to it properly
thanks for reply Huggs,
how can i get to the tri color screen? i only have mgldr on the phone thanks
hold voldown when starting phone to get to bootloader
connect usb
run task29
however i don't think its necessary since flashing cwm should reset all the nand partitions.
enter magldr
usb flasher
flash CWM
enter cwm
choose wipe data/factory reset to clear out any leftover android folders on your sd card
make sure your target rom.zip is on the sd card
flash your rom thru cwm by selecting 'flash zip from sd card'
that loads up Magldr, im not using winmob, i was using android
holding power starts magldr
holding voldonw (JUST voldown, not voldown and power)
if JUSt holding voldown doesnt start bootloader, you have problems.
When in magldr i go to USB flasher and my pc see's it as a removable device but when i run any program like hspl or daf it doesnt recognize it at all
ok just holding vol down goes to load boot but says SD kernal wont open or something it flashes up quite fast
i had android on NAND, and im pretty sure the way i done it was so there was only the android OS on the internal memory not winmob aswell
liam.ire said:
When in magldr i go to USB flasher and my pc see's it as a removable device but when i run any program like hspl or daf it doesnt recognize it at all
Click to expand...
Click to collapse
well no it wouldbnt, because you run those programs from bootloader, not magldr.
liam.ire said:
ok just holding vol down goes to load boot but says SD kernal wont open or something it flashes up quite fast
i had android on NAND, and im pretty sure the way i done it was so there was only the android OS on the internal memory not winmob aswell
Click to expand...
Click to collapse
trust me, the bootloader is always there, magldr cant start without it. magldr is, to all intents and purposes, a really fancy bit of code that sits where the winmo secondary splashscreen usually lives. If you removed bootloader, the phone wouldn't do anything, let alone start magldr.
power off
hold and keep holding voldown
tap and release power
keep holding voldown
if you don't get to the multi coloured stripy screen (bootloader) then you either have a faulty volume button, or are suffering from the (seemingly more and more common) ''cant get into bootloader''.
If that's the case, then i cant help you, and i suspect only a JTAG will save your phone.
---------- Post added at 12:06 AM ---------- Previous post was at 12:00 AM ----------
anyway, forget that for now, how did.........
enter magldr
usb flasher
flash CWM
enter cwm
choose wipe data/factory reset to clear out any leftover android folders on your sd card
make sure your target rom.zip is on the sd card
flash your rom thru cwm by selecting 'flash zip from sd card'
.............go? any luck?
ok well bad news then..
power off
hold and keep holding voldown
tap and release power
keep holding voldown
did that and it said "SD KERNAL WONT OPEN" or something to that degree :/
as for the 2nd option with CWM when im in magldr and choose USB FLASHER and my pc see's it i flash cwm on the pc side yeah?
i believe i have the right files isit 'DAF' the application no?
thanks again for your help man id be totally lost otherwise
yea, usb flasher, connect usb, run daf.exe
sorry to say its not sounding good no advice for you im afraid. there are a fair few threads that talk about bootloader not starting, so read read read, and then tomorrow look up jtag.
sorry.
ok thanks man, very frustrating as the phone was working pretty flawlessly with the same rom for months.. then all of a sudden small software issue so i restarted and it just got stuck at the android logo..
the fact i can still use as mass storage or that my pc detects in the flasher means its not totally broken hardware wise?
ok well i flashed DAF and it worked! phone restarted and it said "NAND Kernal wont open" but thats the first time flashing anything worked since
just to clarify the DAF did flash and said it worked but i couldnt load the bootloader because NAND kernal wouldnt open
nothing more i can say, i'm afraid. I've not seen anything definitive regarding these types of issue.
liam.ire said:
ok well bad news then..
power off
hold and keep holding voldown
tap and release power
keep holding voldown
did that and it said "SD KERNAL WONT OPEN" or something to that degree :/
as for the 2nd option with CWM when im in magldr and choose USB FLASHER and my pc see's it i flash cwm on the pc side yeah?
i believe i have the right files isit 'DAF' the application no?
thanks again for your help man id be totally lost otherwise
Click to expand...
Click to collapse
Can you show us a picture of you screen with that message? Might help us help you
Hello,
i have 2 question about HD2 with Android NAND
1. I cant make hard reset on the phone. I've tried factory rest form the menu, but after the restart, nothing is changed. How can i make hard reset in another way?
2. Is there a way to install Andorid ICS or Jelly Bean without working Volume buttons...
Thank you!
To master reset you have to go into recovery
Sent from my HTC HD2 using XDA
LexHammer said:
without working Volume buttons...
Click to expand...
Click to collapse
you are pretty much stuck right where you are, unless you just happen to be running cLK with a touch recovery, and if you aren't already running cLK and touch recovery, you can't get them, because you need the volume buttons to install them.
Isnt there a PC program that i can use to install Andorid from the computer or any app that can map volume buttons to some of the hardware buttons on HD2?
LexHammer said:
Isnt there a PC program that i can use to install Andorid from the computer or any app that can map volume buttons to some of the hardware buttons on HD2?
Click to expand...
Click to collapse
There's always SD Android. I don't think it's possible to do much without working volume buttons.
Can i use both NAND and SD Andorid? How will choose which one to boot first?
Wait, sorry I didn't read the OP properly, you're already on NAND Android right? If so, then you're stuck on that ROM, SD Android requires power buttons when in MAGLDR.
use hd2 toolkit install clk and then over the hd2 toolkit touch recovery. use backbutton to boot into recovery.
http://forum.xda-developers.com/showthread.php?t=1090783
oh sorry you need the volume buttons...
if you have something for trade we can trade http://forum.xda-developers.com/showthread.php?t=1860554.
i think you have no way to get another rom...
You can install recovery without volume buttons, but you need CLK.
just flash the recovery via fastboot and viola touch recovery and theres your reset
KShion619 said:
You can install recovery without volume buttons, but you need CLK.
just flash the recovery via fastboot and viola touch recovery and theres your reset
Click to expand...
Click to collapse
And if i dont have clk, but magldr, can i do the "just flash the recovery via fastboot" part without volume buttons?
No.
HI all, thank you for your time.
I recently inherited a htc hd2 that has android 2.3.4 on it, model T8585 baseband ver maui.11amd.w11.19.sp.v1, 2011/06/23 00:50. kernel 2.6.35.7. build number 10hx2p.h3.111121.ad2_3_4_v1.wvgac_cn.com_v01_3g.
I don't know what any of that means but for 3 days I have been trying to put ICS on my phone but cant get any of the apps to connect to the phone via usb, htc sync, win mod sync, no rom apps connect, moborobo will connect, and accessing the sd works but that is all.
I do not have clockwork recovery and can not install, my recovery program is <3e>.
even though android is running on the phone it will not allow root access.
I have downloaded and installed all the java and sdk stuff, could not manualy install usb connection drivers, my os is win 7 64.
I am going mad, every turn seems to be a brick wall, but not a brick phone yet, please help!
don't worry
Hi dj,
well it sounds like the most important stuff should be on your phone. However, I'm missing the following information:
Do you have magldr or CLK installed?
To find out, do the following:
Turn on your phone (with the hangup-key), right after feeling the bootup vibration press and hold the hangup-key again.
If you have a working magldr or CLK installed it should show up now.
The version is also important, my MAGLDR is version "1.13".
Tell me what your phone has installed please and I'll try to help more.
Greets
rubb3ld1ek4tz said:
Hi dj,
well it sounds like the most important stuff should be on your phone. However, I'm missing the following information:
Do you have magldr or CLK installed?
To find out, do the following:
Turn on your phone (with the hangup-key), right after feeling the bootup vibration press and hold the hangup-key again.
If you have a working magldr or CLK installed it should show up now.
The version is also important, my MAGLDR is version "1.13".
Tell me what your phone has installed please and I'll try to help more.
Greets
Click to expand...
Click to collapse
thanks for the quick reply, no I can not install that stuff, when I go into recovery mode it is <3e> recovery not clockwork, I can not install them because my phone does not seem to support native usb, I have tryed to install them from the sd card, I have tryed to install CLK from the app at the google download store, nothing works, I have red that i should roll back rom to win but cant to that without htc or other sync working, I have read roll recovery back to <2e> using the sd card but cant do that, I cant even root the phone because everything requires that a usb sync work or that CLK already be on, I;m going round in circles.
dj.asynchronous said:
thanks for the quick reply, no I can not install that stuff, when I go into recovery mode it is <3e> recovery not clockwork, I can not install them because my phone does not seem to support native usb, I have tryed to install them from the sd card, I have tryed to install CLK from the app at the google download store, nothing works, I have red that i should roll back rom to win but cant to that without htc or other sync working, I have read roll recovery back to <2e> using the sd card but cant do that, I cant even root the phone because everything requires that a usb sync work or that CLK already be on, I;m going round in circles.
Click to expand...
Click to collapse
okay, I don't know if I get you right? You have android on your HD2 but you don't have MAGLDR or CLK (those are bootloaders, not recoveries)?
Magldr looks like this: http://www7.pic-upload.de/17.02.11/n35i2xpo9mg.jpg
And you enter it this way (if you should have it): pull out battery -> put back in -> press and hold the power key until you see the magldr screen (takes maybe 5 seconds).
My problem is that I'm not sure how your phone is setup. Please try to clarify.
If you have or had a working android on your phone, I'm pretty sure that you also have MAGLDR or CLK installed.
However... if you don't have it yet please download the HD2-Toolkit from here: http://forum.xda-developers.com/showpost.php?p=19931919&postcount=50
Thats a good tool to install either: magldr or clk. And once you have it I'll try to help you with that.
Greets
rubb3ld1ek4tz said:
okay, I don't know if I get you right? You have android on your HD2 but you don't have MAGLDR or CLK (those are bootloaders, not recoveries)?
Magldr looks like this: http://www7.pic-upload.de/17.02.11/n35i2xpo9mg.jpg
And you enter it this way (if you should have it): pull out battery -> put back in -> press and hold the power key until you see the magldr screen (takes maybe 5 seconds).
My problem is that I'm not sure how your phone is setup. Please try to clarify.
If you have or had a working android on your phone, I'm pretty sure that you also have MAGLDR or CLK installed.
However... if you don't have it yet please download the HD2-Toolkit from here: http://forum.xda-developers.com/showpost.php?p=19931919&postcount=50
Thats a good tool to install either: magldr or clk. And once you have it I'll try to help you with that.
Greets
Click to expand...
Click to collapse
I do appreciate your help, I had already installed the toolkit but it will not connect to the phone(no pc based "phone hacking"software will connect to the phone. the usb works fine only to access the sd card, moborobo will synch with phone but nothing else.
when i hold vol down and on, the phone boots into <3e> recovery, <3e> is not an emoticon, it is the name of the recovery app the phone boots into, not any clockwork, magldr thing.
I think I could sort it all out one way or another if I could flammin ROOT! my phone, but all the methods I have found involve using a sync program that i cant use because they will not communicate with the phone.
I know it seems strange that a windows phone has android on it without being rooted or having other stuff going on, but I assure you this is the case.
I'm obviously missing something but I don't know what it is??? I's there a way to root the thing from the sd card, or is there a hidden box that i just have to check to access the root? I'm lost bro http://forum.xda-developers.com/images/smilies/eek.gif
PLEASE DON'T follow those steps. As Nigeldg pointed out: there are incorrectnesses in my post!
Follow this link instead: http://forum.xda-developers.com/showthread.php?t=1044830
Okay, I think I kinda get where you're stuck at.
Here is what I think I would do, just out of my memory:
- Install the Toolkit again. Start program and in there download the drivers (button in the right corner) and install them properly.
- Boot phone and press down the volume down key (exactly like this: click on power button, release power button, hold volume down and keep holding), to get into three color screen.
- Connect your phone via usb and wait until it says USB on the phone (instead of serial)
- if it should not switch to USB, your Windows does not connect to your phone, because of a driver problem (maybe you have to reboot your pc once?!)
- start your toolkit
- press Wipe (Task 29) --> this will erase everything on your phones NAND
- follow instructions
- next press install HSPL
- follow instructions
- reboot phone
- press Install MAGLDR
- follow instructions
- boot phone and keep holding the power button until you see the MAGLDR menu
- move down to "5. USB Flasher" (with volume down)
- press call button to enter
- wait until it says USB....USB
- in the Toolkit, on the left side choose your partition size (my suggestion 200mb main and 45 cache)
- press repartition
- follow instructions
- reboot phone into MAGLDR again and move down to "8. AD Recovery"
- press call button to enter
- move down to mounts and storage
- press call button to enter
- mount USB-Storage (your sd-ccard)
- your computer should show your SD-Card
- download your favorite ROM and move the .zip to the SD-Card
- back on your phone unmount USB-Storage
- go back with back button
- move down to "install ZIP from SDcard" and choose the desired zip file
- follow the installer and reboot into MAGLDR afterwards
- in MAGLDR move down to "10. Services"
- press call button to enter
- and press call button again on "1. Bootsettings"
- and again on "1. Boot Source"
- then move down to "2. Android from NAND"
- and finally press call button to finish this
- Now move cursor to "3. Boot AD NAND" and press call button.
-> Your phone should boot up android and set it up for you, give it some time, even after seeing the login screen.
Reading your last answer, I think your problem is right at the beginning of what I wrote. You can't even get into the 3 color screen?!
If this should not work please tell me at what point of my instructions you are stuck.
Greets
Nigeldg said:
@OP, Actually please don't follow that guide. Just reading a few lines shows that:
1. It says to Task29 (never a necessary step)
2. It then says 'install HSPL'. Either HSPL 2.08 is already installed (so this step isn't needed) or you've just messed up your phone by trying to flash Task29 without HSPL
3. It says to repartition with a 200MB system and 45MB cache - you actually repartition as per the ROMs requirements, and 45MB cache is just a waste of space (most ROMs recommend 5, people have flashed as low as 2MB without issue)
4. It says to transfer the ROM to your SD card via CWM, which can cause the .zips to be corrupted. Always transfer via an SD card reader if possible, or within an OS (not MAGLDR or CWM).
5. It says that you have to set the boot settings to AD NAND when you don't
Whilst it's great that you're trying to help people out and write your own guides, don't do so when you're ill-informed and don't really know what you're doing. It's best just to stick with already existing guides.
@OP, try the guide in my sig if you're looking for one which is easy to follow, has clearly outlined steps and is (most importantly) correct.
Click to expand...
Click to collapse
^The same post I wrote on the other thread
Hey Nigeldg
thanks for your advance in this. Thanks for pointing those out. Will correct that and point to the links in your signature from now on.
Greets
rubb3ld1ek4tz said:
Hey Nigeldg
thanks for your advance in this. Thanks for pointing those out. Will correct that and point to the links in your signature from now on.
Greets
Click to expand...
Click to collapse
" Boot phone and press down the volume down key (exactly like this: click on power button, release power button, hold volume down and keep holding), to get into three color screen".
when I follow this step my phone goes into <3e> recovery, not red blue green clockwork, "<3e>" is my recovery, it is a screen with "!" in a triangle and a little android dude.
my recovery does not let me install unsigned stuff so even though I can put things on the sd card, I can not install them from there.
the phone does not sync with any toolkit, install, htc, win, android, or other even though htc, and android drivers are in my device driver list.
my phone is not rooted.
I do appreciate all your help guys, I will keep looking arround the forum, I found some posts about my <3e> recovery and mods so it will allow install of non signs apps, peace.
dj.asynchronous said:
" Boot phone and press down the volume down key (exactly like this: click on power button, release power button, hold volume down and keep holding), to get into three color screen".
when I follow this step my phone goes into <3e> recovery, not red blue green clockwork, "<3e>" is my recovery, it is a screen with "!" in a triangle and a little android dude.
my recovery does not let me install unsigned stuff so even though I can put things on the sd card, I can not install them from there.
the phone does not sync with any toolkit, install, htc, win, android, or other even though htc, and android drivers are in my device driver list.
my phone is not rooted.
I do appreciate all your help guys, I will keep looking arround the forum, I found some posts about my <3e> recovery and mods so it will allow install of non signs apps, peace.
Click to expand...
Click to collapse
This may sound silly but always best to check the simple things 1st, do you have windows mobile device center installed?
I am not entirely convinced you have a HD2. you may have a clone.
I'm inclined to believe RobbieP's right. I've never heard of this recovery ever being used on an HD2. You claim that you're not rooted (all of the HD2's ROMs are rooted bar the DFT Stock Desire ROM) and you also say that when you boot up there is an ! in a triangle. None of these things should really be happening on an HD2.
Secondly, you seem to be very confused about your terms. Please read the guide in my sig about that, as if you somehow do have an HD2 then you should be aware of all of those things before flashing.
If possible, could you post some pictures of your phone and also the settings info etc.? It might help in determining if it's a fake.
swukjay said:
This may sound silly but always best to check the simple things 1st, do you have windows mobile device center installed?
Click to expand...
Click to collapse
Yeh, it's installed, but just to be certain, after your question, I reinstalled it, still no good.
Im going to try to root the phone latter, will look around on this forum for a non usb style root.
yeah I suppose it could be fake, I have only seen on forums of Samsung phones using this recovery, It was bought on eBay cheep, when I do a factory reset it goes Asian on me, it looks exactly like the hd2.
As far as getting some terms mixed up, sorry, I had put in a lot of reading and trial and error before asking for help, It's hard to gauge how long to grind away at something before asking for a tip.
I will post some pics of the phone latter
thanks again for all your help guys.