If you have recently upgraded to ICS and cannot connect or see your router's 5GHz SSID, it is because Sammsung used Taiwan legal channels for HK as well, You should set your router's 5GHz channle to 56, you will then see and be able to connect to your router's 5GHz channel.
Reference here: http://www.cisco.com/en/US/docs/ ... _chp.html#wp1272047
My route only has channels 36, 40, 44 and 48
Is there any way of changing /extending the number of channels on ICS?
First check whether toucan change the country setting of your router.
I am sure changing some files at the system/etc/wifi will get that fixed as well. However I haven't gone into it. Hopefully some coders could come up with an app to change that .
Sent from my GT-N7000 using Tapatalk 2
In the event your router cannot be changed to to other channels, you can do the following if your device is rooted:
1. install root explorer or anything similar
2. navigate to root then etc/wifi/
3. open the following files with a text editor ( if you are using root explorer long press the file name will pop up a menu, then choose text editor:
Files to be modified: nvram_net.txt_murate and nvram-net.txt_semcove ( back up these two file first)
4. change ccode of the two files from TW to ALL , save and exit
5. restart your wifi then you will see your 5GHz SSID at whatever channle
6. connect to that SSID as usual
In the event your router cannot change to to other channels, you can do the following if your device is rooted:
1. install root explorer or anything similar
2. navigate to root then etc/wifi/
3. open the following files with a text editor ( if you are using root explorer long press the file name will pop up a menu, then choose text editor:
Files to be modified: nvram_net.txt_murate and nvram-net.txt_semcove ( back up these two file first)
4. change ccode of the two files from TW to ALL , save and exit
5. restart your wifi then you will see your 5GHz SSID at whatever channle
6. connect to that SSID as usual
Thank you very much. I follow the root method and it works like a charm. 5GHz connected at channel 36.
It's a pitty that sammy launch such update with a silly mistake like this. Non root user may not be able to use their 5GHz though .
Sent from my GT-N7000 using xda premium
Glad that works for you
Sent from my GT-N7000 using Tapatalk 2
vaio said:
In the event your router cannot change to to other channels, you can do the following if your device is rooted:
1. install root explorer or anything similar
2. navigate to root then etc/wifi/
3. open the following files with a text editor ( if you are using root explorer long press the file name will pop up a menu, then choose text editor:
Files to be modified: nvram_net.txt_murate and nvram-net.txt_semcove ( back up these two file first)
4. change ccode of the two files from TW to ALL , save and exit
5. restart your wifi then you will see your 5GHz SSID at whatever channle
6. connect to that SSID as usual
Click to expand...
Click to collapse
I follow that and still can't connect to WIFI! Don't know what is wrong!
birdfish said:
I follow that and still can't connect to WIFI! Don't know what is wrong!
Click to expand...
Click to collapse
2.4Ghz works for you?
It is always obtaining IP address on the phone!
---------- Post added at 02:09 PM ---------- Previous post was at 02:08 PM ----------
vaio said:
2.4Ghz works for you?
Click to expand...
Click to collapse
Yes, I think it should be: Channel11 (2462 MHz)
That is a different problem, forget your router and add them back, make sure you enter the password right
The password is OK. I think there maybe some issue with the Franco r-3 kernel!
Thanks for your help
birdfish said:
The password is OK. I think there maybe some issue with the Franco r-3 kernel!
Thanks for your help
Click to expand...
Click to collapse
Sorry I cannot be of help to you. Have a great week
birdfish said:
The password is OK. I think there maybe some issue with the Franco r-3 kernel!
Thanks for your help
Click to expand...
Click to collapse
working fine on 3 routers, 2 are broadcomm based chipsets, using wpa-tkip and one is atheros based chipset using wpa2-aes. no problems getting IPs, connecting and reconnecting, or anything weird like that.
i only switched ROMs last night, but so far so good.
I'm using Franco r3 as well.
vaio said:
In the event your router cannot change to to other channels, you can do the following if your device is rooted:
1. install root explorer or anything similar
2. navigate to root then etc/wifi/
3. open the following files with a text editor ( if you are using root explorer long press the file name will pop up a menu, then choose text editor:
Files to be modified: nvram_net.txt_murate and nvram-net.txt_semcove ( back up these two file first)
4. change ccode of the two files from TW to ALL , save and exit
5. restart your wifi then you will see your 5GHz SSID at whatever channle
6. connect to that SSID as usual
Click to expand...
Click to collapse
Thanks, this worked like a charm running LPY -
Also, for those following these instructions a few minor correction, at least for me;
the correct files are nvram_net.txt_murata and nvram_net.txt_semcove
I'm sure these were typos on the posters part, but nonetheless for those that like to be certain they are modifying the correct files.
Also, my stock LPY did not list "TW" in the ccode field, instead it said GB but I'm assuming this is dependent on the region code for the rom you are using - just change to ALL like it states
vaio said:
In the event your router cannot be changed to to other channels, you can do the following if your device is rooted:
1. install root explorer or anything similar
2. navigate to root then etc/wifi/
3. open the following files with a text editor ( if you are using root explorer long press the file name will pop up a menu, then choose text editor:
Files to be modified: nvram_net.txt_murate and nvram-net.txt_semcove ( back up these two file first)
4. change ccode of the two files from TW to ALL , save and exit
5. restart your wifi then you will see your 5GHz SSID at whatever channle
6. connect to that SSID as usual
Click to expand...
Click to collapse
Interesting enough, I followed these steps to have a look at the 2 files (nvram_net.txt_semcove & nvram_net.txt_murata) and the ccode is already set to ALL but I still can't see the lower 36, 40, 44 & 48 channels.
I ended up having to change the firmware on my router, so it could run the higher channels for it to work.
---------- Post added at 06:55 AM ---------- Previous post was at 06:51 AM ----------
birdfish said:
The password is OK. I think there maybe some issue with the Franco r-3 kernel!
Click to expand...
Click to collapse
This is what I did to fix the franco kernel problem.
http://forum.xda-developers.com/showpost.php?p=26584486&postcount=2740
tw15tr said:
Interesting enough, I followed these steps to have a look at the 2 files (nvram_net.txt_semcove & nvram_net.txt_murata) and the ccode is already set to ALL but I still can't see the lower 36, 40, 44 & 48 channels.
I ended up having to change the firmware on my router, so it could run the higher channels for it to work.
Click to expand...
Click to collapse
i haven't tested this on 5ghz myself yet either. There was a modified text file from the I777 iirc that someone posted in the development section that changed it specifically to US 5ghz bands. IIRC this was for gingerbread, but it might be identical or easily modifiable for ICS.
Maybe even though ALL is set at ccode, it still limits the ccodes in some way.
Here is the thread I'm mentioning, I will have to delve into this myself later on...
http://forum.xda-developers.com/showthread.php?t=1479839
tw15tr said:
Interesting enough, I followed these steps to have a look at the 2 files (nvram_net.txt_semcove & nvram_net.txt_murata) and the ccode is already set to ALL but I still can't see the lower 36, 40, 44 & 48 channels.
I ended up having to change the firmware on my router, so it could run the higher channels for it to work.
---------- Post added at 06:55 AM ---------- Previous post was at 06:51 AM ----------
This is what I did to fix the franco kernel problem.
http://forum.xda-developers.com/showpost.php?p=26584486&postcount=2740
Click to expand...
Click to collapse
Franco Kernel is now at R4, that solves the Wifi issue ( But some says no......)
vaio said:
Franco Kernel is now at R4, that solves the Wifi issue ( But some says no......)
Click to expand...
Click to collapse
No for me too. But reflash speedmod K3-3 and the WIFI is back to normal.
I don't want to reflash the whole rom with Franco just to make WIFI work.
I believe I have a different problem than the one stated here, but I would appreciate any help I can get. As a little bit of history, I did experience the same problem I am experiencing now when I flashed LPF.
I flashed LQ2 over my rooted stock GB, which flashed the new modem "LPT." Previously, I had LA4 modem on my GB ROM, which worked fine and rendered a speed range of 9-10 MBps over wi-fi. After flashing LQ2 ROM and LPT modem, my wi-fi speeds have gone down to 200-300 KBps, which is quite low for a wi-fi connection.
I have a 2.4 GHz router, so my issue is not 2 vs 5 GHz, but the issue I am facing is the really slow speed of wi-fi on the new ROM. When I had the same wi-fi issue after flashing LPF, I had tried flashing a different and LA4 modem, but the speed did not improve.
I am in the US and my Note is originally from the UK.
As I said, any help with this issue is appreciated, as I feel crippled with such low wi-fi speed, and would be great to revert back to the high speeds. Thanks.
Related
Have flashed JVH (GT_I9000_XWJVH_XXJVO_XEEJV3)with odin and rooted with CF-Root-XW_NEE_JVH-v3.2-CWM3RFS, and the good old user agent problem is back in stock browser and Dolphin HD. In Dolphin it says "Desktop" for user agent in settings, but if I try bbc.co.uk it takes me to the mobile site. Anyone else seeing this?
Try this, push to system/app but backup first. Thanks to criskelo for the tweak.
Thanks for that. Not sure if I am doing something wrong, but I used root explorer to copy over ( changed to r/w) and renamed my old one... but it still doesn't work. Am I doing something wrong? If I click on it in root explorer it trys to run the installer but fails?
TIA
Rename old 'browser.apk.bak' then paste new browser. You do not need to run installer. Either reboot or go to your launcher app drawer n click on internet icon. Good luck.
Yeah thats what I did... still the same . Are you running JVH
Sent you a pm.
Still no joy
Is no one else having problems with GT_I9000_XWJVH_XXJVO_XEEJV3 ??
Yep, I have the exact same issue!!
Anyone else seeing the problem? Anyone got a cure?
I can remember something like this on one of the older roms ( early Froyo I think) but can't find if that ever got cured by people or if Samsung cured it in an update?
After copying new browser apk across to system remember to set the permissions on it so it matches all other apks in folder
Sent from my GT-I9000 using Tapatalk
I'm also using JVH and initially tried the browser file from this thread. The problem is not the useragent setting from the browser - it's working fine. The problem is that the phone is also sending out the x-wap-profile string as part of the http requests. Some sites are obviously disregarding the useragent string when they detect the x-wap-profile string.
I'm getting around the issue by using an app from the market called 'Filterproxy'. I've used the app to setup a proxy server on the phone and I'm routing the browser requests through the proxy. All the proxy server is doing is stripping out the x-wap-profile string from the http requests. Works great.
i have this problem to...really annoying. I have a problem with the market too, a lot of app doesn't show(ex: face, tiwiiter, and a lot of other), it is only with me??
Hey Rob would you kindly provide us with the exact procedure you used to setup Filterproxy? I'm sure many of us would appreciate it!
EDIT:
I've actually managed to get it working as well! For those wondering:
1) As Rob mentioned, install FilterProxy from the market
2) In the "Main" Tab of the app click the settings button which will direct you to your wireless & networks settings page
3) Go to Wireless and/or Mobile Network (Depending on which connection you are using)
4) a) For Wi-Fi simply go to Wi-Fi settings -> Advanced (Press the menu button)
4 b) For Data access go to Mobile Networks -> Access Point Names -> Edit access point
5)set the Proxy to localhost
6)set the Port to 8000
7) Now head to the "HTTP Header" tab in the app
8)Fill the name box with "X-Wap-Profile"
9) Press the R button to place "(REMOVE)" in the value box
10) Press "Add"
Presto!
BTW in case this doesn't work try adding "x_wap_profile" as well
Hi!
I Cannot find solution to connect to company's hidden Wifi 802.1x network
I tried almost anything to make it work .... but without success
I have had various wpa_supplicant bin files.
I have edited 100x wpa_supplicant.conf file.
I was reading forums with "SOLVED" solutions ... for other phones ... but cannot find solution to work on Huawei IDEOS X5 U8800.
I also have tried it with various ROMs: MIUI 1.8.x and 1.9.x, VOID, B135, B136,B160, cm7-100911, Oxygen ...
But every time with no success ...
Hints:
a) All other colleagues connect without problem (they have HTCs, Samsung Galaxy S I,II, iPhones 3,4 ...) while my friend and i cannot connect
b) I connect to my home Wifi (WPA/PSK) without a problem!
Anyone have similar problem?
BTW: MY wpa_supplicant.conf file looks like:
ctrl_interface=wlan0
update_config=1
network={
ssid="mySSID"
scan_ssid=1
key_mgmt=IEEE8021X
group=WEP104 WEP40
auth_alg=OPEN SHARED
eap=PEAP
identity="[email protected]"
password="zzzzzz"
phase2="auth=MSCHAPV2"
}
Brgds,
S.
HELPPPPP
Have had sporadic issues myself, and found that setting ap_scan=2 in /system/etc/wifi/wpa_supplicant.conf was helpful but not flawless. I reverted back to a CWM of MIUI 1.8.19 which I recalled seemed to connect without issues. On reviewing the wpa_supplicant.conf files in system and data, I noticed that the ctrl_interface was different.
ctrl_interface=DIR=/data/misc/wifi/wpa_supplicant GROUP=system
rather than ctrl_interface=wlan0
I haven't yet tried moving back to the latest version of MIUI to test these changes, but will do so when I get the time.
Modify below files and ensure permissions dont change
Both /data/misc/wifi/wpa_supplicant.conf
and /system/etc/wifi/wpa_supplicant.conf
also create a new folder wpa_supplicant in /data/misc/wifi/
mkdir /data/misc/wifi/wpa_supplicant -m 750
haydnlj said:
Have had sporadic issues myself, and found that setting ap_scan=2 in /system/etc/wifi/wpa_supplicant.conf was helpful but not flawless. I reverted back to a CWM of MIUI 1.8.19 which I recalled seemed to connect without issues. On reviewing the wpa_supplicant.conf files in system and data, I noticed that the ctrl_interface was different.
ctrl_interface=DIR=/data/misc/wifi/wpa_supplicant GROUP=system
rather than ctrl_interface=wlan0
I haven't yet tried moving back to the latest version of MIUI to test these changes, but will do so when I get the time.
Modify below files and ensure permissions dont change
Both /data/misc/wifi/wpa_supplicant.conf
and /system/etc/wifi/wpa_supplicant.conf
also create a new folder wpa_supplicant in /data/misc/wifi/
mkdir /data/misc/wifi/wpa_supplicant -m 750
Click to expand...
Click to collapse
The control interface is changed so that it works with other versions of wpa_supplicant. If you change it to the way it was in the older Miui then wifi won't work at all.
If it never worked (even on stock) then the issue probably isn't with wpa supplicant, and could be a problem with the wifi driver, or the hardware itself. This really needs someone who knows what they're doing and access to a hidden 802.1x network to look into it.
stockwell said:
If it never worked (even on stock) then the issue probably isn't with wpa supplicant, and could be a problem with the wifi driver, or the hardware itself.
Click to expand...
Click to collapse
Was there a driver change between 1.8.19 and later MIUI versions? The supplicant seems like the same version (v 0.6.10)?
On returning to 1.8.19 have had 3 days without issues. When on 1.9.30 the change to ap_scan=2 definitely improved and seemed to make a connection on reboot flawless, but reconnection from sleep was sporadic (probably <30%). Watching wpa_cli output when waking phone from screen off on 1.9.30 showed a failed connection attempt, and then a series of timed scans (CTRL-EVENT-SCAN-RESULTS) - these continued after CTRL-EVENT-CONNECTED (something that didn't occur after toggling wifi on/off/on and connecting).
stockwell said:
This really needs someone who knows what they're doing and access to a hidden 802.1x network to look into it.
Click to expand...
Click to collapse
Agree
haydnlj said:
Was there a driver change between 1.8.19 and later MIUI versions? The supplicant seems like the same version (v 0.6.10)?
On returning to 1.8.19 have had 3 days without issues. When on 1.9.30 the change to ap_scan=2 definitely improved and seemed to make a connection on reboot flawless, but reconnection from sleep was sporadic (probably <30%). Watching wpa_cli output when waking phone from screen off on 1.9.30 showed a failed connection attempt, and then a series of timed scans (CTRL-EVENT-SCAN-RESULTS) - these continued after CTRL-EVENT-CONNECTED (something that didn't occur after toggling wifi on/off/on and connecting).
Agree
Click to expand...
Click to collapse
Thanks for you feedback, that really helps. Even though the version number is the same they aren't the same file.
I'll get in contact with you via pm to try and sort this out.
Thanks guys for trying!
So there is no solution yet?
Any news ?
Thanks!
Any news ?
I have same problem with that.
I also have the same problem, and looking for a solution. I am using Redmi 4a MIUI 8.2.6.0
re: [DEV] Ubuntu on Nexus S (natively)
I'm new so I can't answer to the thread : [DEV] Ubuntu on Nexus S (natively) in the dev section.
I have a root image (based on the HD2 image) and a netarchy kernel (2.6.35) which contain :
- working wifi module : scanning does not work with iwlist but with wpa_cli, it does (cause of driver and combo scan feature).
- working touchscreen : patched mxt224 kernel module to have ABS_X, ABX_Y and BTN_ events + evdev 2.6
I have converted the ext2 image to an ext4 one. I will try to make proper patches and readme if they are people interrested in.
In 2.6.39, there is a bcm driver in staging. Maybe with 3.0 kernel (waiting ICS kernel sources), we can have a working wifi module with wireless-tools such as wicd or iwlist.
This is awesome... I've been waiting for this just to mess with it
Sent from my Nexus S 4G using Tapatalk
Wow this would be awesome. Any chance you could work on something for the NS4G?
Sent from my Nexus S 4G using xda premium
It seems they have the same configuration (instead of wimax support). This may work.
For now, I can't post on the right thread on DEV section and I can't post the link
You can grab files on : http://www.okazoo.eu/~yan/ubuntu_on_nexuss
The root image file is still uploading ... be patient !
Find a way to enable iwlist and wicd scanning using combo-scan bcm4329 feature.
I have written a wrapper, to use it you need to :
- mv /sbin/iwlist /sbin/iwlist.old
- cp the wrapper script to /sbin/iwlist ...
This is a crappy way as this way is not robust to wireless-tools update !
I can connect to my home wireless router with wicd !
Root image file is uploaded !
I found an interesting stuff to control the modem (2G and maybe 3G) :
http://trac.osuosl.org/trac/replicant/wiki/libsamsung-ipc
I will check if I need to write a RIL library to make a simple interface to write/read SMS and make calls.
The next step is to find GUI apps to do those things !
For some reason, i get a kernel panic while booting. The rootfs at http://forum.xda-developers.com/showthread.php?p=10486278 works fine, but still, no touchscreen or anything
Can you give me some details :
- hardware (Nexus S or Nexus S4G and what version S-LCD or Amoled) ?
- last messages (reason of kernel panic) ?
Did you use my boot image file ?
looks cool, but how to use it without a mouse.
It's the i9020A, the non-Sprint 4G one. I placed your rootfs image into the /sdcard/ubuntu/ folder, and used fastboot to boot the boot.img that you provided in initramfs.tgz. The errors themselves, i'll copy the file back and run it again to pinpoint it.
Doing the same thing with the .ex2 that the other thread uses lets me boot to the GUI, but still, no interaction
radianter said:
looks cool, but how to use it without a mouse.
Click to expand...
Click to collapse
I don't understand the question. Is your touchscreen working ?
breakingspell said:
It's the i9020A, the non-Sprint 4G one. I placed your rootfs image into the /sdcard/ubuntu/ folder, and used fastboot to boot the boot.img that you provided in initramfs.tgz. The errors themselves, i'll copy the file back and run it again to pinpoint it.
Doing the same thing with the .ex2 that the other thread uses lets me boot to the GUI, but still, no interaction
Click to expand...
Click to collapse
I am waiting the output. For now, I am working on a i9023 version. I have uploaded new initramfs archive which contain a more generic boot image file. Can you test it ?
can you tell me how to install this? I am waiting for so long for an working Ubuntu or XP on our beloved nexus s
winsys said:
I am waiting the output. For now, I am working on a i9023 version. I have uploaded new initramfs archive which contain a more generic boot image file. Can you test it ?
Click to expand...
Click to collapse
Sure thing, i'll test it for you. Let me download it real quick.
---------- Post added at 02:07 AM ---------- Previous post was at 01:38 AM ----------
It boots and the touchscreen works. Yay. For some reason, there's no option to configure the Wifi. I'm going to snoop and tweak, see if i can't find it.
---------- Post added at 02:32 AM ---------- Previous post was at 02:07 AM ----------
The app launcher loaded on my second reboot, and after switching to "Wifi mode" It still does not detect any wifi networks. Setting up the At&t APN in the 3G settings doesn't work either.
Normal, it's normal, the module bcm4329 provided in the root image file was build for i9023 kernel.
You can download this file : https://www.okazoo.eu/~yan/ubuntu_on_nexuss/bcm4329.ko
After download, issue : adb push bcm4329.ko /lib/modules/2.6.35.13+/kernel/drivers/net/wireless/bcm4329/bcm4329.ko
Wifi should work after that !
---> download new image files !
Still no luck, after a couple reboots. I'm still faced with "No wireless networks found" in the Wicd network manager. I compared the MD5 sums of the file on the device with the file you linked me, and they match, so i know i pushed it successfully.
The Network Tools lists a Loopback device and several unknown devices occupying different ports, (rmnet0, usb0, sit0), with the Loopback device (lo) selected. Are those imperative?
Hum, at your point, do you see eth0 in the iwconfig listing ?
Do you have copy the iwlist wrapper I made ? iwlist-wrapper must be pushed as iwlist. What is the iwlist scan output ?
iwlist
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
I'll mess with it, see if i can't get it working
---------- Post added at 02:53 AM ---------- Previous post was at 02:34 AM ----------
Running iwconfig returns
# iwconfig
iwconfig
lo no wireless extensions.
rmnet0 no wireless extensions.
ifb0 no wireless extensions.
ifb1 no wireless extensions.
usb0 no wireless extensions.
sit0 no wireless extensions.
ip6tnl0 no wireless extensions.
No mention of eth0.
Is there EAP-SIM support in OnePlus 2?
EAP-SIM is supported by my carrier (France/Free) to connect phone to nearby WiFi Hotspots automatically using mobile account identification.
There are some posts around here talking about this feature (here and there for example).
It is not provided in AOSP, the android issue #9329 is open since 2012 asking for it.
Apple, Samsung, LG, HTC, Sony... phones support it through custom OS or Android overlay.
So the real question is: Do Oxygen OS provide it?
EDIT/ANSWER :
It works fine. I've used it multiple times.
Carrier application (Free) says it supports it
I just received the phone yesterday and installed an application provided by my carrier to configure Visual Voice Mail (Messagerie Free).
The application can also configure EAP-SIM and said that the phone is compatible and I completed its configuration.
However I didn't had the change to test it (EAP-SIM).
I'll post a reply if I'm able to test it.
Connection occurs
I saw the phone connecting to an EAP-SIM WiFi Hotspot (FreeWiFi_Secure), however I couldn't confirm the connection was working (I was driving, so safefty first).
It seems to be working, I just have to confirm it (browse some website when connected to a EAP-SIM WiFi Hotspot).
It works
I can confirm it works.
I've used it multiple times.
So good news.
Hi everyone !
Are you SURE EAP-SIM is working on the Oneplus 2 (the 2, not the one).
I had the oneplus ONE and, yes, it IS working, "Messagerie Vocale Free" can configure Freewifi_secure for the phone.
But I now have the Oneplus TWO and "Messagerie Vocale Free" cannot configure it : It says it cannot configure EAP-SIM on Dual SIM phones, you have to configure it manually. And when trying to configure EAP-SIM manually.. it's not possible...
I'm talking about stock ROM (Oxygen OS 2.1.2)
Yea it works I'm on stock rom and AK kernel.
In Singapore I needed Eap Sim for my provider's free WiFi, so it kind of look like this
network={
ssid="SingTel WIFI"
key_mgmt=WPA-EAP IEEE8021X
eap=SIM
sim_num=1
priority=235
}
network={
ssid="Singtel WIFI"
key_mgmt=WPA-EAP IEEE8021X
eap=SIM
sim_num=1
priority=242
}
The settings were automatically disabled by the phone once added for some reason, I thought it didn't work and left the code there until one day I realize I was connecting to the WiFi through Eap Sim. Nt sure what I did in between that made it work. Perhaps restart or add only when WiFi is off or disable then enable background WiFi scan
Take note that there are two wpa_supplicant file. The correct one should have some WiFi AP already there if u have previously connected to any WiFi AP. The path should be system>data>misc>WiFi
I modified the file using fx file manager with the free root add-on. Which means u need to root ur phone in order to change the settings. ES file explorer didn't work for me
10/8/16:
I've upgraded to Paranoid 6.0.2, there is EAP-SIM option when connecting to Singtel WiFi however it will always result in "Authentication Problem".
I've tried many ways to fix it:
- Removing pmf = 1
- Setting DHCP back to lollipop
- Disable 1.2 and 1.1 TLS for compatibility
- Adding sim_num = 1 (will be removed by driver due to external_sim = 1)
All of them did not work for me.
The only one that did work was to use EAP-AKA instead of EAP-SIM. It even works for [email protected] too.
P"
Thanks all for your advices,
Here is the procedure for French FREE MOBILE + OP2 users
The correct file "wpa_supplicant.conf" is in System(root)/data/misc/wifi as Imk1988 said (so grateful to him btw)
(do not modify the other wpa_supplicant.conf file in System(root)/etc/wifi)
Add this line
network={
ssid="FreeWifi_secure"
key_mgmt=WPA-EAP IEEE8021X
eap=SIM
sim_num=1
priority=5
}
after rebooting, it's working like a charm
Conditions:
SIM FREE MOBILE in slot 1
OP2 rooted
Hi lmk1988,
I tried using your method for Singtel WiFi (using a Oneplus X on CM12.1) and it's not working I'm afraid. I could edit the file successfully, but I get a "WiFi connection failed" when I try to connect.
Will try again later!
(I'm wondering if it's just that CM doesn't support EAP-SIM at all...)
Unfortunately I'm using oneplus two (custom rom: SkyDragon v3.1 OOS2.2 and Boeffla 1.1-beta3) now.
Not really sure if it will work for oneplus X
Anyway do make sure u are modifying the correct file, there are two files with the same name.
And note that not all Singtel WiFi will work. It's funny it can be working on one day then not working the next. Kinda depends on time and place.
---------- Post added at 08:59 AM ---------- Previous post was at 08:27 AM ----------
Okay the issue seems to be from CM12.1 oneplus X
Take a look at bbs.zhiyoo.com/thread-9972195-1-1.html
(T.T I can't post links yet because under 10 post)
It's in Chinese but if you look at what they say for version 8
Code:
8.0更新：
回滚7.0版本的音频驱动设置
回声问题应该解决了
禁用EAP-SIM 设备本身不支持
It basically means
Code:
version 8.0:
Reverted Audio Driver to 7.0
Echo issue have been be fixed
[B]Restricted EAP-SIM setting, it is not supported[/B]
I'm not sure if it means CM12.1 for oneplus X does not support EAP-SIM, or does it mean oneplus X does not support EAP-SIM.
Try changing your ROM back to OOS and see if it works
I see.
Thanks man! I don't really know much about coding, etc., and finding out where everything us. Just kinda winging it by searching through forums and so on.
So really appreciate the help and the info! = )
I'm not sure if I'll try to switch back to the stock OS at the moment, found CM to be preferred at the moment. If I do, though, I'll let you know!
OK i seem to have this extremely bizzare wifi issue.
I can connect to wifi access points fine, if i turn off wifi and turn it back on i am unable to auto connect and have to re-enter credentials for it to connect. Before doing so i checked my wifi ap to see if my ap were listed and they were not.
If i re-enter everything is fine but having to do this to wifi ap is annoying. After i have entered and check the wifi ap files i can see the credentials are saved etc.
If i do not re-enter the credentials and restart the phone with wifi enabled it connects to AP fine.
If i leave wifi connected and connect to to wifi aps that require certs its fine also without the need to re-enter creds.
At first i thought maybe i had a corruption in the wifi config files but i dont see any, no duplicate aps at all, no fancy characters i can see.
Does anyone have any thoughts as my wifi config with aps is many years old and has a massive amount of APs listed.
It doesnt matter what ROM i try as soon as i restore all my APs the issues start, is there a way to bulk export, wipe wifi aps and re-import them all again?
Do wifi aps with spaces in or length cause issues with 5.1.1?
1 root ur phone if you are unrooted 2 download any build prop editor from playstore 3 change this line ro.securestorage.support=true to false in /system/build.prop 4 if it doesnt work try a different build prop editor cz the changes might not be sticking 5) hit the thanks button if it helped
dork997 said:
1 root ur phone if you are unrooted 2 download any build prop editor from playstore 3 change this line ro.securestorage.support=true to false in /system/build.prop 4 if it doesnt work try a different build prop editor cz the changes might not be sticking 5) hit the thanks button if it helped
Click to expand...
Click to collapse
ro.securestorage.support=false
already