I have a htc trophy, and i unlocked him with a code number. But i can't install xap files.
I need to do anything else to install xap files?
WP version: 7.10.8107.79
Bootloader: 5.12.2250.1
Thanks
the Unlock code is simply for unlocking your simcard slot to accept a different carriers sim card.
If you want to install xap files, you need to install HSPL and flash a custom rom.
Thanks.
Can i flash with this specifications?
Rom: 5.12.168.01
Radio: 5.69.09.05a
Version: 7.10.8107
I buy the phone with this version and i do not have any backup.
Related
After flashing this rom : [Rom][WM6.5][27 Aug'09]New Elfin ROM With Latest build 23034 Xip/Sys
The device stay in the 'smart mobility' screen,
I can't even boot it up first time
I can't turn it on so how can flash back other rom?
Can someone tell me what can I do?
Please Help me. thank you
You can use this Unbricker ROM ---> http://forum.xda-developers.com/showthread.php?p=2913636#post2913636. It's the easyest way, without using other WM devices. It worked for me.
You can also use the Elf/Elfin Unbricker (Gold Card) ----> http://forum.xda-developers.com/showthread.php?t=437996. Hadn't tried this one though.
Hope that I helped.
------------------------------------------------------------------------------------------------
A user of this forum, 911sniper, provided us with an HTC test-only ROM:
http://forum.xda-developers.com/show...&postcount=735
Alternate download link:
http://www.neufgiga.com/n/50-17/shar...492127a54134b/
Alternate download link:
http://www.4shared.com/file/82315205/ea440324/RUU.html
IMPORTANT: Read the steps below before flashing!!!!
------------------------------------------------------------------------------------------------
This is a ROM that can potentially overwrite and/or unbrick a device with an original (non-patched) SPL. It has a wildcard for Model ID (ELF0*****) and CID (11111111).
I don't have a bricked Elf but I tested it with an original CID-locked SPL and it overwrote it and flashed a new generic HTC ROM with the following:
IPL 2.11.1002
SPL 2.11.1000 MFG
ROM version: 2.11.0. WWE
ROM date: 08/14/07
Radio: 02.98.90
CE OS 5.2.1620 (Build 18125.0.4.2)
Here are the steps to make it work:
Quote:
Download this ROM from the link above
Two ways to flash:
Rename the file to ELF0IMG.nbh if you want to flash from SD card (you must format the card to FAT32 first)
Put the ROM in a RUU folder that contains the RomUpdateUtility.exe. You must remove any other .NBH files in that folder first.
Start your bricked Elf in bootloader mode (hold down camera button and reset). If you are using the SD card, it should flash right away.
NOTE: If the device flashed successfully but is now stuck at the new boot screen, you are still ok. Now you can flash ANY shipped ROM at the bootloader (if you have an Elfin, flash only an Elfin shipped ROM) and your device will be running again. If you can't flash a shipped ROM after successfully flashing the Unbricker ROM, then make a Gold Card and follow the steps in that thread.
NOTE: If the Unbricker ROM doesn't work then make a Gold Card and use it again on that card.
NOTE:
One thing I noticed is that you cannot use the white screen method (elf-uspl.exe) after you flash this ROM. If you try that, then the message "Not in use" pops up under the penguin. However, you can flash ANY shipped ROM from bootloader after this unbricker ROM has been flashed. From there, you can do white screen method and then flash the Hard-SPL/USPL/cooked ROM.
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_hTC_Asia_SEA_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following releases:
1. RUU_Schubert_hTC_Asia_SEA_WWE_1.54.728.01_Radio_5.51.09.29_22.32.50.10U
2. RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.728 i.e. with characteristic value 728
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_hTC_Asia_SEA_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_hTC_Asia_SEA_WWE_2.20.841.02_Radio_5.65.09.11a_22.44.50.15_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Why is the rom firmware update is Telstra Operator? instead of SEA ?
177412c0 said:
Why is the rom firmware update is Telstra Operator? instead of SEA ?
Click to expand...
Click to collapse
Hi,
Cause in the thread title has characteristic value [CV] 841
Regads, ansar
What's new in ROM, plz...
drnothing said:
What's new in ROM, plz...
Click to expand...
Click to collapse
Hi,
NoDo (OEM & SYS) and Radio, it is compact i.e. min size and fast
Regards, ansar
Telstra Nodo Rom for Telstra HD7???
Hi Ansar....Loving your work mate.
I noticed you have used the Telstra HD7 'nodo' rom as a base for a few variants.
Is there any chance your could sign one so it can actually load on to the Telstra HD7. I a demo Telstra HD7 in need of an update to nodo.
I tried the SEA releases using the CV 841 but to no avail and was hoping you could realse a signed one that will owrk on a the 841 variant.
Cheer.
Amsim
Amsim said:
Hi Ansar....Loving your work mate.
I noticed you have used the Telstra HD7 'nodo' rom as a base for a few variants.
Is there any chance your could sign one so it can actually load on to the Telstra HD7. I a demo Telstra HD7 in need of an update to nodo.
I tried the SEA releases using the CV 841 but to no avail and was hoping you could realse a signed one that will owrk on a the 841 variant.
Cheer.
Amsim
Click to expand...
Click to collapse
Hi,
I will try to develop one
Thnx for supporting!!
Regards, ansar
NoDo ROM SEA_2.20.841.02
I was able to use DFT's RSPL & HSPL successfully and I by coincidence reflashed my HD7 with RUU_Schubert_hTC_Asia_SEA_WWE_1.57.728.02_Radio_5.52.09.16_22.33a.50.10U_by_ansar
Now, my SPL version is 1.57 (not available in DFT's RSPL list) so I want to change it to 2.20 (which is available in DFT's RSPL list) by using these two ROMs but was unsuccessful (followed your instructions correctly)
I got ERROR [244] Invalid Model ID
Why is that?
Hi there. how can I install this coming from deepshining rom?
I put
TyphooN_CM7_v3.7.1-MAGLDR.zip
on the SD card and
used the program
"HD2 Android NAND Toolkit".
When using
"Install MAGLDR"
the process stucks at 0%
Do I need to downgrade my ROM version from v3.14 to a older ROM version?
Thank you very much for your reply.
Regards,
Wim
First, you need HSPL in order to install magldr
Thanks.
I manage to find HSPL4, and with this SPL3.03.000 was no problem. Now I could install Android om my HTC HD2 with WM3.14 installed.
an M681Q updated itself to version 6.3.0.0A and lost all languages except English and Chinese, how do i flash a Global rom?
SN: 91QEBN
Aandroid version: 7.0
Build: 6.3.0.0A
Have you tried manually downloading any of 6.2.0.0G/ 6.3.0.0G and put it in the phones root directory and updating by ticking with clear data?
I've tried actually, but the phone just reboot without updating or it says that the .zip file I'm using is corrupted.
If I unlock the bootloader, I'll be able to pass from Chinese Rom the the Gloal Version?
Thanks,
First of all, a friendly "hello" to everyone.
The XDA Developer Forum has been helping me for 10 years, you guys are awesome.
Now I would probably need your "swarm knowledge" again, my previous knowledge will probably help me
not further.
My goal is to somehow get LineAgeOS on 3 devices, preferably with root.
The plan is:
1. downgrade with stockroms,
2. Unlock bootloader
3. Install twrp
4. Flash LineageOS
5. Flash root
I have different problems with this.
I couldn't find any solutions with Google either, especially since almost all download links are now offline.
My first project is the P9 Lite (vns-l21 with Android 7 and emui5.0 software version: ???)
As I understand it, I only get the bootloader unlocked if I downgrade to android 6, otherwise the dcunlocker software cannot read the unlock code.
I would then do this via an update.app from the SD card, with the 3-finger method.
The manufacturer mode *#*#2846579#*#* is blocked by the firmware. (no menu opens).
- Here I have the problem that I can't find any compatible firmware.
(Error message during installation, telling me to get the right version)
I can't find out which version I need or is compatible for an update
my build number shows "NRD90M test-keys".
(Don't know why, I think I tried to flash something.)
How should I proceed now?
Psychedelic2313 said:
NRD90M test-keys".
Click to expand...
Click to collapse
your fw is incomplete or you installed fw for different region (wrong oeminfo). That's why Project menu doesn't work.
With this build number you cannot install full stock using 3 buttons method. Also dc-unlocker cannot recognize your device.
Try to unlock BL using PotatoNV method, then install TWRP, flash oeminfo for your region and install full stock ROM via dload method from SD Card.
Thank you for your prompt reply !
how can i get my oeminfo ? i dont now my region which is installed.
I have seen a tutorial on youtube using PotatoNV. - but for this i must have to open the handy. Right ? I don't really want that.