Related
Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)
Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.
I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english
Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.
Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!
I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?
Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...
bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help
MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help
Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom
try to flash sbf use rsd
If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.
if sbf doesnt work u better send it to warranty
Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)
If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.
white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope
Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD，the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.
Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy
good night friends!
I'm here asking for this help not for lack of looking for the solution, sorry my bad english, I'm from Brazil and I
defy caught in a bootloader, I tried almost everything I found here in the forum, but most of the problems is
reset solved by making the recovery, but in my defy the recovery does not open, the flash works only power + vol up, already
I spent several roms to no avail, could someone help me run my recovery? grateful heart
list of roms flashead
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FFJORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbfz
JORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbf
JRDNEM_U3_2.34.1_DEBLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA02B.0R_USAJORDANRTCEE_P029_A019_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTHKTW_P021_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_3.4.2_164-003_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFFR03A.0R_PDS03C_USAJRDNFRYOVFFR_P028_A014_M004_HWp3_Service1FF.sbf
Motorola_Defy_Nu___Android_2.2_FroYo
shadow_defy_2.3.3_85_Orange
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
mmec2 said:
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
Click to expand...
Click to collapse
I really can not, no way to go to the screen with the robot android! he goes right on the logo motorola M!
can it be hardware problem?
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
farsight73 said:
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
Click to expand...
Click to collapse
I'm using motorola rsd 4.9 with updated drivers, what happens is install the rom normal after reboot gets stuck in the Motorola M logo, the software update site does not recognize my phone, do all these roms that I would be no my phone?
im tried this roms now
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF
3.4.3_11-Stock.UKTmobile_BLUR
but no results!
don't worry about it, dude.
maybe you can try the way followed:
1.power off your defy;
2.remove the battery from the phone;
3.plug the usb cable into the phone without battery;
4.open RSD and chose one of the roms your listed, but 3.4.2-177-005 NORDIC prefered,
5.take the battery into your phone, now your can see the "connected" on RSD;
6.click the "start" button to flash;
7.wait the phone reboot completely, usually it'll reboot.
if not reboot, remove and on your battery, power on your phone, then press the "volume - and power" botton together, you can enter the robot screen, press volume up and down botton together, usually you can enter the recovery, then chose wipe 3 and 4, totally you can save your defy~~
Be sure to have enough battery while flashing..
Get the phone into bootloader (hold volume down when switch on) and flash an SBF like one from the list you've attached using RSD lite. Surely you have used RSD Lite before?
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
jdearauj said:
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
Click to expand...
Click to collapse
This same friend, I have the same problem, is this a hardware problem? I move the roms but not normal
Vol I login recovery - + Power key
http://forum.xda-developers.com/showthread.php?t=966537
Try flashing nordic, if fails arabic, if fails, 2.3.3, if fails probably corrupt nand broken hardware.
Before and after every flash always try to access recovery (volume down) and WIPE. reboot and wait crossing fingers, if it fails to boot flash next sbf, try to go recovery + wipe; reboot, cross more fingers; if fails to boot try next sbf and repeat.
The reason for this is that you can flash a lower version but it wont boot, so you have to flash a higher and higher version until you get one that works.
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
zyxwvut said:
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
Click to expand...
Click to collapse
OMG Exactly!!!! i have same problem and nobody seems to be able to tell me what to do, they keep saying same thing about trying various SBF's and Vol down + power method. No matter what SBF file I successfully flash with, i cannot get into boot recovery mode.
I have heard before from desperate users that they were able to revive their phone by flashing a full 2.3.4 sbf. This however comes with downsides of not being able to downgrade to froyo by flashing ANY froyo sbf's. There is a way to downgrade back to froyo but its a dirty method. Even after downgrade you can't just flash a sbf, you will always need to restore nandroid and flash fixed sbf
Hi.. I m using a Motorola Defy XT 535 (rooted). Installed Audio beat installer, it asked for a reboot and after that... its going on a continious boot loop..
Tried going to the recovery mode using the volume+ - and power on button.. but it stops at a screen with an exclamation surrounded by a white triangle and the android robot at the button.. can some1 help me with this.. plz?
Thanks
I do not own this device but Hold volume + & - and you'll see wipe menu or if it doesn't work tap bottom right corner
Sent from my MB526 using xda premium
Thanks that worked..
i m into the android system recovery.. I have the sbf for my mobile.. can anyone guide me through the flashing process...
I m a noob in this.. and I know nothing abt this
Thnx
toss87 said:
Thanks that worked..
i m into the android system recovery.. I have the sbf for my mobile.. can anyone guide me through the flashing process...
I m a noob in this.. and I know nothing abt this
Thnx
Click to expand...
Click to collapse
Refer this thread. Should help
http://forum.xda-developers.com/showthread.php?t=1827338&highlight=xt+535
I'm having this issue too
Just last night I FINALLY rooted my phone. An hour or so later, I installed Beats Audio Installer Root v.2.3.2.1 AdFree_Released by HPR.apk. I had already done Titanium Backup before trying to install this. I ok'd the reboot, and have been watching a bootloop ever since. I can go into recovery, and bootloader. I have already tried to wipe cache, and a factory reset...with no luck. I don't know how to get to my backup I made, and I'm out of ideas.
mamalovebug14 said:
Just last night I FINALLY rooted my phone. An hour or so later, I installed Beats Audio Installer Root v.2.3.2.1 AdFree_Released by HPR.apk. I had already done Titanium Backup before trying to install this. I ok'd the reboot, and have been watching a bootloop ever since. I can go into recovery, and bootloader. I have already tried to wipe cache, and a factory reset...with no luck. I don't know how to get to my backup I made, and I'm out of ideas.
Click to expand...
Click to collapse
go to recovery mode and wipe data... nor the best to cleanup with flashing one more time with the fresh room.
This beats Audio Installer seems a spam application, mine using Player Pro for a nice and clear audio player.
Try this link for custom room : http://forum.xda-developers.com/showthread.php?t=2249892
(press THANKS if I do help you :good: )
How to unbrick Motorola Defy XT535
Hello android geeks,
Please help me
Scenario
1. i was using chinese ics rom in my defy xt535. due to more problems with that rom, i flashed with Gingerbread rom. But i forge to wipe partition data before flashing . so i was unable to pass beyond red m logo
2. when i tried to enter recovery menu. i got a blank screen with green android with yellow exclamation mark within white triangle
3. again i flashed with chinese ics , again without clearing partition data (because i am not able to access recovery mode). now i am able to enter android , But touch screen is not working
What I have tried
1. I tried erasing phone data using Wondershare mobile transfer, but i failed as it is possible only if I enable USB debugging. sadly i cannot enable usb debugging as my touch screen is not working
Advantages
1. I can access bootloader (white screen) by pressing power button and up button
2. I can able to pass beyond moto logo, which is a good sign that the phone can be saved
Disadvantages
1. Unable to enter recovery mode (Yellow exclamation mark)
2. Touch screen is NOT working, so not able to enable usb debugging
Doubts
1. How to check whether my touch screen problem is software oriented or hardware oriented?
2. What is the method to completely erase phone data without entering recovery mode, no root, and without touch screen functionality?
3. Is there any way to install recovery menu without root function and without touch screen function?
4. My idea is to completely erase all the phone data and flashing it with gingerbread rom? Is it right or is there any other alternatives?
Things I have
1. Bricked Defy XT535
2. Laptop and PC with windows 7
3. USB cable
4. RSD Lite
5. SUTLR
6. Patch files to root Defy XT535
7. Chinese ICS ROM
8. Gingerbread ROM
9. Wondershare Mobile transfer
If you feel i have missed few details, please notify me
I am one among the few indian XT535ians, please help me to save the rugged device
my email id [email protected]
thank you
Hello,
I need help from the community.
Since I've tried Quarkx's 2ndboot updates, my Defy never stopped freezing and rebooting.
I have tried lots of sbf, either get it stuck in the bootloader with error err:A5,69,35,00,23 (with sbf that includes Quarkx's updates) either get it stuck in a bootloop (with Froyo sbf).
I really don't know what to do now and I don't have access to factory recovery anymore (pushing power button + down volume doesn't do anything).
Should I trash my Defy ? Or is there still a hope ?
Please help me, I really love this device, don't wanna change
Thank you all
Nobody has no idea ?
Is VERY very hard to really brick this phone. So:
Remove battery and when you put it back keep pressing vol+ button. The bootloader menu will appear. On PC start RDS lite and chose JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf. Connect defy to windows pc through USB cable and the connection confirmation will appear on RDS. Flash the ROM.
EDIT:
UPDATED POST AT THE BOTTOM!
Hey guys,
flashed czechops CM 10.2 a while ago everything was running fine.
On Saturday i decided to let the battery drain completely to do a full recharge. That`s when the Problems started.
After booting the Phone up i was stuck in a Bootloop with the Cyanogenmod Logo turning around and around and around and so on.
Okay i thought let`s reboot and see what happens.
Still the same.
I then booted into recovery by holding the x button on the keyboard and power and then when the androind in the triangle showed up using vol + and vol - to get into recovery.
I then deleted the cache and rebooted again (No full wipe to factory default trying to avoid that).
After that the phone turned on saying Android is getting updated Updating Package x of y.
After its done its now stuck in Apps getting started.
After i found out to get to the Bootmenu i decided to check the Recovery Menu there.
I can choose between Motorola Stock Recovery (the normal one i already was on)
and Team Win Recovery.
So i choose Team Win Recovery and thought okay since its not working im gonna install the Update of czechops 10.2
Installing itself worked fine. But now im stuck in the same loops.
Currently im goind a Backup of the System with the Team Win Recovery in the hope i wont loose the data even if what im trying to avoid a full factory wipe.
What kinda poped in my eyes when i started the recovery was that it said E: Unable to locate '/boot' partition for backup.
Could this be the problem which is stopping the phone from booting correctly?
And if so how can i fix it?
Hope anyone can help me,
Kind Regards,
Invi
I had te same problem before doing a clean install.
I don't know why but, if you install the android 10.0 tezet and from there start the gapps, creating a account and installing your apps, you do not have problems to install the 10.2.
Good luck.
Sent from my A953 using xda app-developers app
jonasgitz said:
I had te same problem before doing a clean install.
I don't know why but, if you install the android 10.0 tezet and from there start the gapps, creating a account and installing your apps, you do not have problems to install the 10.2.
Good luck.
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the heads up jonas.
Unfortunately its too late its seems. My Milestone is just a stone now it seems.
After trying to install 10.2 12.03.14 and that not working correct after doing a full factory wipe i decided to install cm 11 from czechop.
Unfortunately it seems it failed.
My milestone just boots up and stops at the First Logo. No lights. No chance to get in any recovery mode except the normal one.
Bootloader was working some time but stopped cause the Battery is almost empty.
The Problem is i cant even load the Phone anymore cause as soon as i put it on a charger it boots up and wont get enough battery power to live for a few minutes.
So the only thing left working is the normal Android 3e Recovery. Hope i can do anything from there.
Don't give up.
Your problem it's normal, you fisrt need a global battery charger to recharge your battery.
After it, go to boot recovery, you must turn on the milestone holding " volume down + camera" or "volume up + camera", than you need to uses the RSD Lite to reflash your milestone 2.
Normaly, when do you came from another room, you stay in boot loop, so you need to entery in Miestone recovery, "x + volume down" than after it you do a factory reset. It will boot normaly after that.
To go to boot recovery, you must turn on.
Try harder.
(Guys, lets try to help a little)
Sorry about my poor english
I wont. Already ordered an global battery charger yesterday. In the mail from the store delivery is 7-10 Weekdays.
Good thing i have a second cellphone which i can use in the meantime.
i had a similar scenario
Invisan said:
Thanks for the heads up jonas.
Unfortunately its too late its seems. My Milestone is just a stone now it seems.
After trying to install 10.2 12.03.14 and that not working correct after doing a full factory wipe i decided to install cm 11 from czechop.
Unfortunately it seems it failed.
My milestone just boots up and stops at the First Logo. No lights. No chance to get in any recovery mode except the normal one.
Bootloader was working some time but stopped cause the Battery is almost empty.
The Problem is i cant even load the Phone anymore cause as soon as i put it on a charger it boots up and wont get enough battery power to live for a few minutes.
So the only thing left working is the normal Android 3e Recovery. Hope i can do anything from there.
Click to expand...
Click to collapse
hi, I had a similar situation to that earlier today, in that I got to the situation where on boot up I got the Motorola logo then nothing else (I was trying to install C.M. 11 from 10.2 but when it went to install got a message E;// error - verification signature installation aborted), after major panic thinking I'd bricked my milestone, I tried starting the phone in bootloader mode (press camera, volume up and power buttons at the same time) which gives a black screen saying boot loader 70.13 and towards the bottom says boot menu, connect USB, then on your pc find program MOTOROLA SOFTWARE UPDATER (hope you've got it) open the program, it'll say connect a device plug your phone in and let it do it's stuff, takes about an hour (charge your battery using a desktop battery charger beforehand) and your phone will be returned to the stock Motorola rom but at least your phone isn't a brick and you can always start again trying cyanogenmod.
hope this helps
mark13_2001 said:
hi, I had a similar situation to that earlier today, in that I got to the situation where on boot up I got the Motorola logo then nothing else (I was trying to install C.M. 11 from 10.2 but when it went to install got a message E;// error - verification signature installation aborted), after major panic thinking I'd bricked my milestone, I tried starting the phone in bootloader mode (press camera, volume up and power buttons at the same time) which gives a black screen saying boot loader 70.13 and towards the bottom says boot menu, connect USB, then on your pc find program MOTOROLA SOFTWARE UPDATER (hope you've got it) open the program, it'll say connect a device plug your phone in and let it do it's stuff, takes about an hour (charge your battery using a desktop battery charger beforehand) and your phone will be returned to the stock Motorola rom but at least your phone isn't a brick and you can always start again trying cyanogenmod.
hope this helps
Click to expand...
Click to collapse
So i downloaded Motorola Software Updater and RSD Lite + Motorola Device Manager newest Version
Unfortunately my Milestone seems not to be recognized by either Software updater nor RSD Lite.
In the Device Manager S Flash OMAP3630 shows up and is recognized.
Im running Windows 8.1 x64 and on a second Computer Windows 7 x64
What tool can i use ander Linux? Maybe the Phone will be recognized there.
EDIT:
K found it. Doing it with Linux at the Moment. Its working.
Only need to Root it then and after that flash my old Files and hope they are working.
At least i have an old Backup i made from Tezet before going up to 10.2 which i made with Clockworkmod
Hope it will work and not be broken like the one i made with Team Win Recovery.
Anyone knows how i can change stuff in a Team Win Backup?
Invisan said:
So i downloaded Motorola Software Updater and RSD Lite + Motorola Device Manager newest Version
Unfortunately my Milestone seems not to be recognized by either Software updater nor RSD Lite.
In the Device Manager S Flash OMAP3630 shows up and is recognized.
Im running Windows 8.1 x64 and on a second Computer Windows 7 x64
What tool can i use ander Linux? Maybe the Phone will be recognized there.
EDIT:
K found it. Doing it with Linux at the Moment. Its working.
Only need to Root it then and after that flash my old Files and hope they are working.
At least i have an old Backup i made from Tezet before going up to 10.2 which i made with Clockworkmod
Hope it will work and not be broken like the one i made with Team Win Recovery.
Anyone knows how i can change stuff in a Team Win Backup?
Click to expand...
Click to collapse
I did find it took a long time for the Motorola software updater (about 20 mins) to detect my milestone 2 (I'm using windows7 x64), I'm thinking the mistake I made when trying to upgrade to CM 11 was I didn't wipe data/cache before trying to install it
mark13_2001 said:
I did find it took a long time for the Motorola software updater (about 20 mins) to detect my milestone 2 (I'm using windows7 x64), I'm thinking the mistake I made when trying to upgrade to CM 11 was I didn't wipe data/cache before trying to install it
Click to expand...
Click to collapse
Hi mark,
well Windows popped up saying N/A
when it should show new Software.
It also couldnt recognize my Cellphone correctly it seemed.
But i flashed it with Linux anyways.
Flashing to tezet`s 10 worked also like a charm
and i could install my Backup i made in december before
updating to czechops 10.2.
Guess after i know what to do now i will try to update to cm11 now.
Invisan said:
Hi mark,
well Windows popped up saying N/A
when it should show new Software.
It also couldnt recognize my Cellphone correctly it seemed.
But i flashed it with Linux anyways.
Flashing to tezet`s 10 worked also like a charm
and i could install my Backup i made in december before
updating to czechops 10.2.
Guess after i know what to do now i will try to update to cm11 now.
Click to expand...
Click to collapse
let us know how you get on as I'm tempted to try again (I do like how CM10 gets rid of all the un-necessary apps but gives you control of all the system parameters) but want to step up to CM11 without having the same problem as before.