Problem MD5 mismatch for instal GingerSpeed v 1.0 ROM - Defy Q&A, Help & Troubleshooting

Hi, i have a problem with the install GingerSpeed v 1.0 (Rom) because when i try to restore the imag, i have a message : MD5 mismatch.
And it's not possible for me to test the ROM.
Thank you for your help

download again and try it
one of the reazon could be
"broken file in download"
what rom you have before and what tipe is the phone?
Sent from my MB525 using XDA

vaserbanix said:
download again and try it
one of the reazon could be
"broken file in download"
what rom you have before and what tipe is the phone?
Sent from my MB525 using XDA
Click to expand...
Click to collapse
I have sbf 3.4.2-179-2 CEE DEBLUR (root) with defy green lens.
Before i test cm7 and WhiteRabbit Edition 1.5.2 *AROMA INSTALLER*, but i have a problem of 3G disconnect. probably with my provider : FREE mobile.
(i test a different baseband without success) And i'm not alone for the problem.
My ROM CEE DEBLUR work with Free mobile but the synchro contact facebook don't work and i want the buttons for wifi, airplane mod, torch.... in the statubar.
Thank you for your help, I will try again to download the file and test.

2ndinit 1.4.2 don't read .tar archieve(if you put on the phone this version)
must instal 2.0 or 2.3version
Sent from my MB525 using XDA

Related

Moto Defy Hangs

Hi,
I am using Motorola defy android version 2.2.2.
Currently m facing one problem, my phone hangs everytime when i open Data Manger option from Settings. It hangs in a way that the only options remain for me is to remove the battery and start again.
Please help me with this.. Due to this issue i can switch ON or Off my internet option.
Thank You
Chintan Jain
chintu12155 said:
Hi,
I am using Motorola defy android version 2.2.2.
Currently m facing one problem, my phone hangs everytime when i open Data Manger option from Settings. It hangs in a way that the only options remain for me is to remove the battery and start again.
Please help me with this.. Due to this issue i can switch ON or Off my internet option.
Thank You
Chintan Jain
Click to expand...
Click to collapse
Go CM10 (Jelly Bean)
Stock sucks hard. A lot of problems.
http://forum.xda-developers.com/showthread.php?t=1768702
Search for Epsylon build.
Sent from my MB525 using xda app-developers app
Backup Data and factory reset.
I think, the settings were corrupt. so every time you try to change, the settings crashes.
Sent from my GT-P7500 using XDA Premium HD app
Backup and flash with your factory ROM
Hi,
The best option for you to do is to Backup all the SMS, Contacts and Application data and then flash your phone with the factory build ROM that came in with your DEFY.
Here is the list of ROMS for Defy variants---http://forum.xda-developers.com/showthread.php?t=966537
Go through this link and get your ROM do a MD5 check to double check if the downloaded version is correct. Then flash your phone with that ROM. By doing this you would have the warranty of ur device intact (If your defy is still within the warranty period).:good:
Then finally restore all your backups. :angel:
You may be tempted to upgrade your ROM to the newest SBF like ICS or JellyBeans. while doing so please make sure that that particular SBF is fixed SBF and not full SBF. the difference btwn the 2 is. Fixed SBF allows you to downgrade your DEFY but full SBF only lets you upgrade the version but never downgrade.
If you can understand this then go ahead and search for that perfect match for your DEFY.
Cheers,
Vic
Thanks a lot
ppero196 said:
Go CM10 (Jelly Bean)
Stock sucks hard. A lot of problems.
http://forum.xda-developers.com/showthread.php?t=1768702
Search for Epsylon build.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot for the replay
Thank You
ppero196 said:
Go CM10 (Jelly Bean)
Stock sucks hard. A lot of problems.
http://forum.xda-developers.com/showthread.php?t=1768702
Search for Epsylon build.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Thanx for the reply..

Looking for complete Howto: Defy+ / CyanogenMod installation / under Ubuntu

Hello,
I try to install the latest Version of Cyanogenmod (http://download.cyanogenmod.com/?type=nightly&device=jordan) on my new Defy+, using Ubuntu 12.04
But.. I fail. It seems there is no complete HowTo for Dummies written.
Here , I can find how to install ADB on Ubuntu and my device is recognised:
List of devices attached
0A3AABF910015007 device
Click to expand...
Click to collapse
...but then, what?!
I want to a) delete all thats on the phone and b) install cyanogenmod and the google pack.
If I find several pieces to go through the comlete installation I am happy to make one complete post out of it for everyone.
Thanks,
Jean
That is for defy not defy+
You will get a frequently updated CM7 at fitsnugly.euroskank.com/?rom=cm7&device=jordanplus
Flash the ROM from here on your defy+.
Root your phone and install 2nd init. Then flash the rom in custom recovery. There are plenty of tutorials! Even videos! Google
Sent from my MB526 using xda app-developers app
flash defy+ with 2.3.6 and cyanogenmod
kadavil said:
That is for defy not defy+
You will get a frequently updated CM7 at fitsnugly.euroskank.com/?rom=cm7&device=jordanplus
Flash the ROM from here on your defy+.
Root your phone and install 2nd init. Then flash the rom in custom recovery.
Click to expand...
Click to collapse
thanks. I gave up Linux qnd took a windows computer. that's what I did:
1. Download & install the driver http://www.motorola.com/consumers/v/index.jsp?vgnextoid=2cff07f8ef573210VgnVCM1000008806b00aRCRD
2. download and install RSD lite http://dl.atftas.us/OEM/Motorola/RSDLite5.6.msi
3. Do step 2 and 4 from this HowTo (wipe not necessary) http://www.android-hilfe.de/anleitu...fuer-bl7-stock-roms-2-3-6-dfp-188-hoeher.html
4. install 2ndInit: http://forum.xda-developers.com/showthread.php?t=1032212 and activate it
5. copy the latest version of cyanogenmod on the sd card http://download.cyanogenmod.com/?type=nightly&device=jordan
6. restart entering the bootloader (press the sound button down when the blue light flashes while booting)
and now... I will try with the defy plus versions you send me! you have any other recommendation for strong defy plus versions? maybe a CM9 version?
thanks! and I will update later!
Cm9 has been stopped. Cm10 is latest.
Cm7 is rock solid and stable. Cm10 is awesome but I cant put up with it
Sent from my MB526 using xda app-developers app

[Q] unable to install MIUI

Hello friends,
I have installed custom ROMs many times before... I have tried MIUI, cyanogenmod 9, etc...
But, before few days my phone had stuck at the boot logo, so I flashed it using the SBF- JRDNEM_U3_3.4.3-36-1.7
my phone is Motorola Defy (green lense) MB525...
Now, when I am trying to install MIUI or WIUI , it is showing installation complete,
but, after rebooting the system it is booting in my Normal FROYO only...
How can I install MIUI on my phone again now????
What the.. unbelievable.. Ok then try a newer 2ndinit apk and check the installation zip files. Is the problem limited to miui or does it happen with ANY ROM?
Sent from my MB526 using xda premium
change the sbf version... try to flash other sbf
I also have defy green, I am on fixed GB sbf and its is working perfectly...... you also can try this
Problem Solved
thekguy said:
What the.. unbelievable.. Ok then try a newer 2ndinit apk and check the installation zip files. Is the problem limited to miui or does it happen with ANY ROM?
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thank you very much buddy!!
Actually, this time I was using "tenfar recovery" on my friends suggestion... I think there was some problem with that...
Now, after flashing my defy I installed the newer version of "2nd init recovery"...
And MIUI is running well on my defy now...

CM7.2.4-motoroi-pure-speed-xt720.zipFINAL.

View attachment 1698859hi have been working on this cm7.
its name will say should telll.
Thanks go to.
Nadabak.
Miozoe7ae.
Fjfalcon.
All i did port it without the above people this would not be possiable!
CM7.2.4-motoroi-pure-speed.
http://www.4shared.com/zip/5_FNwx_d/CM724-MOTOROI-XT720-kai-si-50R.html
What works.
radio.
Camera.
Video recording.
Fm radio.
Sensors.
Market.
all gapps are included in rom!
At this time you need to be on xt720-mod-sbf to have working sensors.
i will be adding link and downloads to this page.
WARING do try 2ndboot it will mess up everything.View attachment update-MilestoneXT720-cm7-bootfix-20111005-11541967352147.zip
cm7
http://www.mediafire.com/?9ah0q479plahc0f
Keep this in mind if your a motoroi user you dont flash mod sbf it only for milestone xt720.
Motoroi user can flash without bootfix also.
http://code.google.com/p/miui-xt720/downloads/detail?name=RSDLite4.6.msi&can=2&q=
http://android.fjfalcon.com/xt720/D...tion_MotoConnect_01.01.21_32_bit_4.5.0.msi.gz
This the link to xt720-sbf-mod.
1. Download OR open recovery.
2.extract to main sdcard.
3.flash with rsd lite make sure you have install motorola usb drivers.
When you have flash sbf mod this remember it is not meant to boot.
4.go to stock recovery and click on update from sdcard this will take you to OR.open recovery.
Install cm7.2.4-motorio.zip and bootfix-cm7.
Reboot that it.
tnx man.
downloading.
bootloop
im stuck on motorola logo ;(
should i flash the bootfix? im motoroi
i succesfully installed it. stupid me i use the instruction on milestone
the rom is 100% smooth!
Re: CM7.2.4-motoroi-pure-speed-xt720.zip
zhelin07 said:
im stuck on motorola logo ;(
Click to expand...
Click to collapse
Did you install OR -open recovery to your sdcard.
If so go to stock recovery and click on update from sdcard it will take you to OR-OPEN RECOVERY.
This only xtmod sbf mod is only milestone xt720.
Do have your motoroi sbf to flash.
Sent from my Milestone XT720 using xda premium
mchlbenner said:
Did you install OR -open recovery to your sdcard.
If so go to stock recovery and click on update from sdcard it will take you to OR-OPEN RECOVERY.
Sent from my Milestone XT720 using xda premium
Click to expand...
Click to collapse
yes i click update.zip
fix
http://code.google.com/p/miui-xt720/downloads/detail?name=[79.11][50]_Service1FF_00.sbf.part1.rar
Download this motoroi sbf this will fix you.
You dont flash xt720 mod sbf its only for milestone xt720.
please read thread before flashing.
mchlbenner said:
http://code.google.com/p/miui-xt720/downloads/detail?name=[79.11][50]_Service1FF_00.sbf.part1.rar
Download this motoroi sbf this will fix you.
You dont flash xt720 mod sbf its only for milestone xt720.
please read thread before flashing.
Click to expand...
Click to collapse
yes its working now..
3g
the 3g still not working globe network from ph
guys download the google play mod by chelus its the onlyway to make the market [email protected]
how install this rom for xt720? if i have cm9 and how install sbf?
post some screenshots and/or video plz
How install sbf? and i can install that rom if i have cm9?
mchlbenner,please write full instructions how install this rom on xt720?
cofused?
there are two xt720 guys motoroi and milestone so there might be a confusion. for motoroi user dont use sbf mod and bootfix stock 2.2 will do. for milestone flash 2.1 sbf mod and bootfix will needed.
mchlbenner said:
hi have been working on this cm7.
At this time you need to be on xt720-mod-sbf to have working sensors.
Click to expand...
Click to collapse
Have you try to add sensorfix.ko that is on fjfalcons' ROM ?
Re: CM7.2.4-motoroi-pure-speed-xt720.zip
zhelin07 said:
there are two xt720 guys motoroi and milestone so there might be a confusion. for motoroi user dont use sbf mod and bootfix stock 2.2 will do. for milestone flash 2.1 sbf mod and bootfix will needed.
Click to expand...
Click to collapse
Yes their are but this milestone xt720 forms and directions are given for both.
Sent from my SGH-T759 using xda premium
Re: CM7.2.4-motoroi-pure-speed-xt720.zip
Zachary57 said:
Have you try to add sensorfix.ko that is on fjfalcons' ROM ?
Click to expand...
Click to collapse
For some reason this motodoi cm7 is a little diffrent all my other sensor fixes dont work.
Im working on sensor fix regular sbf 2.1.
Your answer no not yet.
Sent from my SGH-T759 using xda premium
Re: CM7.2.4-motoroi-pure-speed-xt720.zip
vadims746 said:
How install sbf? and i can install that rom if i have cm9?
mchlbenner,please write full instructions how install this rom on xt720?
Click to expand...
Click to collapse
Please read all the thread directions are ready given.
Sent from my SGH-T759 using xda premium
me necessary instal 2.1? if i have xt720.
me need instal sbf from rsd lite yes?
Re: CM7.2.4-motoroi-pure-speed-xt720.zip
vadims746 said:
me necessary instal 2.1? if i have xt720.
me need instal sbf from rsd lite yes?
Click to expand...
Click to collapse
Yes and install motorola usb driver all links are given.
Sent from my Milestone XT720 using xda premium
i got a motorla logo=(
1 i extract open recovery to sdcard
2 i flash sbf in rsd lite,successfully
3 and i dont can go in open recovery it just load motorola logo.

[Q] Defy No Network (2G and 3G)

I have a problem in my Defy Plus
All the ROM that I install everything works perfectly except for the network (2G/3G)
My location is Brazil (South America) with the operator "Tim".
I've been in the Advanced option and changed the baseband and nothing worked.
The only Rom that works perfectly is the Original Network (2.3.5)
I need help, I can not get the old Rom who is consuming a lot of memory and is very old.
Please help me out.
Note: The current Rom is XPeria D 4.1:laugh:
Grateful.
xStiff said:
I have a problem in my Defy Plus
All the ROM that I install everything works perfectly except for the network (2G/3G)
My location is Brazil (South America) with the operator "Tim".
I've been in the Advanced option and changed the baseband and nothing worked.
The only Rom that works perfectly is the Original Network (2.3.5)
I need help, I can not get the old Rom who is consuming a lot of memory and is very old.
Please help me out.
Note: The current Rom is XPeria D 4.1:laugh:
Grateful.
Click to expand...
Click to collapse
Use the Defy baseband switcher.
It might be your APN settings. Are they correct?
Sent from my LT25i using xda app-developers app
Baseband switcher and APN =(
hotdog125 said:
Use the Defy baseband switcher.
Click to expand...
Click to collapse
installed baseband switcher configured to Brazil (TIM), also set up the APN and without any results:crying:. Actually when you turn the phone network is OK! But to make a network connection drops and does not return. Wi-fi and GPS functions normally only 2g and 3g drops!
=
Please help me out. Meanwhile I am without communication =( =crying:
Flash Modem
I do not have much knowledge on "Flash Modem" but will if I change the modem I can stabilize the mobile network? If yes, a modem to be nominated?
=' (
Please,, Help!!!!
Use one of quarx's newer builds, the connection drops don't appear for a very long time.
Sent from my MB526 using xda app-developers app
^^)
hotdog125 said:
Use one of quarx's newer builds, the connection drops don't appear for a very long time.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I will download and install.
Give back.
xStiff said:
I will download and install.
Give back.
Click to expand...
Click to collapse
I had the same problem too, with the same operator "Tim" in Brazil in the CM10.1 rom, so I get back to the whiterabbit nextgen till I found a fix.
Quarx =( / Whiterabbit ??
yupedward said:
I had the same problem too, with the same operator "Tim" in Brazil in the CM10.1 rom, so I get back to the whiterabbit nextgen till I found a fix.
Click to expand...
Click to collapse
Performed the installation Quarx and yet the problem continues = (.. I'm going to download the whiterabbit and volterei for feedback
??!!
Before performing the installation Whiterabbit will perform a downgrade to version 2.2 Rentail (can sometimes conflict is happening between ROMS)
xStiff said:
Performed the installation Quarx and yet the problem continues = (.. I'm going to download the whiterabbit and volterei for feedback
Click to expand...
Click to collapse
unsuccessfully. Whiterabbit installed and make a call or send the following message appears:
xStiff said:
unsuccessfully. Whiterabbit installed and make a call or send the following message appears:
Click to expand...
Click to collapse
This problem is there in all roms. Only way to fix is to reboot. But for you I guess its different. I suggest you to experiment with different basebands.
Give up = (, should not have solution = /already installed android 4.2, 4.1, 4.0, 2.3.7 and none worked. Only with the original ROM 2.3.5 worked.
Sent from my MB526 using xda app-developers app
I've changed the baseband. Already installed the rom baseband Chinese and nothing worked.
Sent from my MB526 using xda app-developers app
Try various basebands using defy baseband switcher
Sent from my MB526 using xda app-developers app
I tested ALL baseband and the maximum that can stay with the network was however not hear anything during the call! Messages work with the internet. Any suggestions?
Inside the folder /system/etc/motorola/bp_nvm_default/ files which are responsible for the network? Mantelos and so I can replace the others (who are not on the network but the configuration of the call / message)
Sent from my Xperia Z using xda premium
Replace the whole folder from stock and try.
Sent from my MB526 using xda app-developers app

Categories

Resources