Database Users

Broken Power button

With a broken power button, is there any way I can get my xda2 into bootloader mode so I can change the ROM?

i doubt it unless you take it apart and shortcurcit the to points that the powerbutton is connected to
would prob be easier to put in a new button then i guess

I may be wrong but doesn't the power button actually put the phone into suspend mode?
Would it work to map the "suspend" function to another button (like the calendar button)? Or does a hard reset only work with the usual specific hardware buttons?

no it's not the only function
clicking on a suspece software shortcut
while reseting the device dont result in a hardreset

I have a solution. i have the same problem. Get a paperclip, and insert it into the hole where the power button should be. Slide it in until your device turns on/off. Then hold it there carefully, and press and hold the ACTIOn key and the reset button.
Works for me!

Power off and Device Lock Reg Edits?

Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!

honduh said:
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
Click to expand...
Click to collapse
The only thing that I could suggest that might help is to get yourself a good case for your phone that would protect the button from being accidentally pushed. I have never had this problem with my phone. The button actually has to be pressed and held to bring up the power off menu. Even when not in it's case, I have never had this happen; however, the phone is only out of it's case, when I am using it. In the case, there is even less chance of powering off the device.
Rod.

The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??

TheChampJT said:
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
Click to expand...
Click to collapse
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys

Find what the application is that launches when pressing the button and add it to the S2U exclusions list.
I have a verizon and my power button toggles screen off and on, so im not entirely sure, Is this a stock popup or a program you installed ? There is probably a registry entry somewhere that defines how the power button functions jsut as the button manager does for other buttons.

honduh said:
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Click to expand...
Click to collapse
I understand your point, and am still wondering what it is you keep in your pocket with your phone that shuts it off!? Anyways, why do you keep referring back to the default device lock? S2U2 performs the same way, as it locks everything besides the power button. If the power button is locked, how would you wake up the device to unlock it ???

the power button has two functions, it blanks the screen if you press it, or it brings up the power off menu when you long press it. The problem i'm having is s2u2 doesnt prevent the power off menu from coming up, where as the stock device lock does. Thus, it is possible to completely power off the phone while the keys are locked.... of course I want to be able to wake the phone up with the power button, but i dont want to be able to turn it completely off.
And i'm not sure how it turns off in my pocket, except i usually carry it with the power button face down (phone upside down) and it must press against the bottom of my pocket...
The application that it is calling is the stock shut down menu, i'm not sure how I could add this to the exception list, as I dont know how to call it remotely....
Thanks again for the replies!

The title of this caught my attention.
It would be very nice to have a registry edit that will lock the device when powered off or on device wake up.
I use S2U2 and I am really not liking it personally, but it is better then the default setup currently I feel.

Broken power button, reassigning to another button

I've got a XDA Mini S which I was given. It works fine, except the power button is faulty. I can press the soft reset button to switch it on, and any button unlocks the phone, but I have to just wait for the screen to time out when I'm done doing whatever I'm doing with it.
Is it possible to reassign the power button to another button, e.g. the voice recorder? I know it wont work to switch the phone on from powered down, but can I lock the phone with another button, maybe via an application or config tool?

abo999 said:
I've got a XDA Mini S which I was given. It works fine, except the power button is faulty. I can press the soft reset button to switch it on, and any button unlocks the phone, but I have to just wait for the screen to time out when I'm done doing whatever I'm doing with it.
Is it possible to reassign the power button to another button, e.g. the voice recorder? I know it wont work to switch the phone on from powered down, but can I lock the phone with another button, maybe via an application or config tool?
Click to expand...
Click to collapse
try to use the AE button Plus for remapping hardware buttons! You can download it at http://ae.inc.ru/index.php

[Guide] Anti pocket unlock tweak

New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!

3ll0s said:
New guy here!
I'm from holland and I have a 2009 hd2 which is currently running AOKP Milestone 5 SE
So this is my first guide and i'll start with something simple.
Eliminating those frustrating pocket unlocks and the screen turning on in your pocket which drains your battery.
The easiest option is to start using your volume rocker as a unlock button and removing all the front button mappings for waking your phone.
Your power button is still your lock button though.
1. Find out if your rom has any special rom options (e.g. rom control, some toolbox, cynogen mod options etc)
2. Go through those options and try to find something with volume wake, it's probably under lockscreen options.
3. If you have found the option enable it, if not you have to download WidgetLocker in the market it comes with the option in it.
4. Once you've tested it we can begin with disabling the front keys by downloading ButtonRemapper in the market.
5. Now when you're in the app, you are seeing a list of key numbers with their name and function behind it. key number 116 is the only one you need to keep on its original state, it is for the power button when the phone is unlocked.
6. Start by clicking a key and putting its state in NONE and press ok, now do this for the remaining keys, EXCLUDING 116.
7. Hit the apply button and see your hd2 hot rebooting
8. When the phone comes to its senses again, try it out!
Lock with your power button
Unlock with your volume rocker.
It almost feels like a modern android phone with the lock/unlock button on the top or side.
I hope you like it, because I really do!
Click to expand...
Click to collapse
Nice guide! Very similiar to my original mod here but you make it a bit more simplified xD

After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?

d4v0r said:
After removing WAKE and WAKE_DROPPED from the keys, clicking buttons doesn't wake the screen (as expected), but lights the buttons, and they stay lit forever (i.e. until the next unlock/lock).
Do you also experience the same thing? Any solution?
Click to expand...
Click to collapse
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk

elesbb said:
Yes this is normal, caused by a gpio wake lock from the kernel. No solution yet, I personally don't care as it drains a lot less battery than having your screen come on
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).

Rick_1995 said:
gpio don't need wakelocks in kernel, when interrupt is raised, cpu exits suspend and services the raised gpio interrupt. This is problem with bad coding logic of the key's backlight driver, i will see what can be done in some days (really busy atm).
Click to expand...
Click to collapse
This is still kernel related though right? as it deals with the driver? And you really dont have to work on it its not that big of a deal, put it on lowwwww priority you do amazing work here so as it is

the most important thing is to not keep anything else metal and/or hard, in your pocket with the hd2. Items like batteries or keys

3ll0s said:
...
Lock with your power button
Unlock with your volume rocker.
...
Click to expand...
Click to collapse
This idea is awesome, thank you!
I've customized it a little bit to save my power button (and so my touchscreen connector).
I've set all my hardware buttons to power, but without wake property.
Now, I can:
Lock with any hardware button
Unlock with volume rocker.

thanks a lots aha

[SOLVED] Any key screen wake for stock?

As the title says, is there any way to set the function of, let say, the back key or the search key to wake the screen?
I know that the ICS port has this function natively but i'm using stock.
i tried Button Remapper and NoLock without success.
any ideas?
note: the reason being is that i need to replace the camera pcb since the power is busted.
it works.... if i pressed on the button with extreme force (yes, i've attempted to rectify the issue myself, but screwed up to the point where i can't undo and fix.)
SOLVED: I edited key 248 (rotation key) with "POWER WAKE".
so now that key can turn off the tablet or wake it.
Makes things with tablet much more bearable until i get the front camera pcb ]replaced.