Just wondering if this bugs anyone else -
My note seems to have an overly sensitive screen.
If It's in my pockets, screen facing in, then sometimes my pocket will trigger the screen. I have haptic feedback on, and when I feel the vibration I think I got a notification on something.
I basically always keep the screen facing out now.
Using glas.t screen protector.
- Frank
Related
Just wondering if X1's screen is more flimsy than other screens. Noticed a slight dent/depression near the top of my screen and been wondering whether it all along was like that or cos the screens more flimsy than other phones. Cos don't think I've been pressing too hard. Own a Touch Pro too and have been using that for a longer time and the screen's still ok. Anyone else notice any dent/depression in your screen?
This is my first phone with a capacitive screen, so perhaps it is a quirk of them, but I have noticed that if I am not holding the phone in such a way that I am touching the metal bezel, the screen does not recognise touches that are close to the edges of the screen. It seems that the screen requires a circuit to be made with other metal parts on the phone before recognising the touch.
For example, if I put the phone on my desk and touch the backspace key with a single finger, nothing happens. If I keep holding my finger on it, and touch the metal bezel, hey presto, the button clicks.
This reminds me of a watch a friend of mine had a long time ago, that had a capacitive "hair trigger" button that only worked for him (because it required a circuit to be made with the back face of the watch, meaning when he pressed the button it completed a circuit through his body)
Anyone else noticed this? It is slightly annoying because I have to hold the bezel when I want to use the phone..
Confirmed.
And you might very well be correct in the assumption about the circuit not closing in every part of the screen. I think it's the nature of any capacitive surface tbh. If you press in the middle of the screen then there is enough adjecent space to actually complete the circuit while on the edges there is simply not enough space around your fingertip to not close the circuit at all. That is why touching the bezel works.
But as I have been holding my little Hero in my hand while typing anything I simply didn't know this little odd thing. I have read about it though.
Yet another reason to hold your precious little Hero in your hand...
Wierd not like that on my samsung.. its all plastic tho
Mine is the same.. especially on the right hand side of the screen. If it's in a case it makes it really bad!!
Sounds like bad shileding and grounding to me
Didn't notice this until I put a screen protector on but now it's really bugging me.
On a related note (metal bezel related), I've noticed that in dim lighting the button backlight flickers. But if i touch the screen and bezel, it stops.
herman3101 said:
Didn't notice this until I put a screen protector on but now it's really bugging me.
Click to expand...
Click to collapse
Same here. Could it be that the screen protector slightly touches the aluminium casing and thus grounding the screen (or creating a wrong potential)?
I noticed that when i touch (=ground) the outer aluminum frame with just one single finger then the touch screen works flawlessly.
(I'm using the offical HTC screen protector).
joemax said:
On a related note (metal bezel related), I've noticed that in dim lighting the button backlight flickers. But if i touch the screen and bezel, it stops.
Click to expand...
Click to collapse
Hmm definatly bad grounding issue. Its either some pretty poor design or a defect.
i confrim, using hero without touch the metal edge result in less responsivity and difficult on multitouch operation
hope new firmware can solve this, too many errors using it like a normal keyboard on a table!
hi
As soon as i make a phone call my screen goes off, now on my iphone it used to do this only when the light sensor was covered. to bringthe screen back on I have to press one of the black buttons in the bottom of the phone, is this a fault?
I had this problem after fitting a screen protector. removing it solved the issue for me.
The genuine HTC Screen protectors have 2 holes in for the sensors. I can confirm this does not affect the screen when making a call.
Are you using a screen protector which doesn't have a hole for the proximity sensor etc?
It may be it can't function right as it maybe seeing the protector as something close to the sensor, hence why the screen goes off.
I have a Vidocq screen protection and the phone wake up again when I finish the call...
So I removed the included screen protector since it had a deep scratch on it. I read on the forums that you don't need the protector and that it actually works better without it.
Well my experience has been the complete opposite. Ever since I removed the protector I'm ready to smash this bloody phone. It's next to impossible to use due to the humidity in my area or something. The SMALLEST amount of moisture on my finger tips or even in the air will cause the screen to go haywire and register touches all by itself. Apps will open by themselves...i can barely type anything as it keeps typing multiple characters on it's own or other silly stuff. If I wipe down the display it will work fine for the first little bit until it gets that tiny bit of moisture from my fingers on the screen again and it starts going haywire again. It's a hassle just to try and unlock the phone from the lock screen at times.
So is my phone defective or is just the suffering I must incur by living in a humid area. I can't use the phone like this so I guess I'll have to look at buying a new screen protector. But if this is not normal and is a fault in my hardware then i would like to return it and get a different phone. I didn't really have issues with the screen protector on.
Ive kept my screen protector on my phone, works fine until i have moisture or (rain drops) on the screen, then my phone doesnt respond and also misfunctions the position of where i touch on the screen not sure if this is normaly as its the rain drops on the screen..
Tested witht he iphone 4 in the rain and works brilliant, why doesnt the X10 do the same !! :/
duffy1807 said:
Ive kept my screen protector on my phone, works fine until i have moisture or (rain drops) on the screen, then my phone doesnt respond and also misfunctions the position of where i touch on the screen not sure if this is normaly as its the rain drops on the screen..
Tested witht he iphone 4 in the rain and works brilliant, why doesnt the X10 do the same !! :/
Click to expand...
Click to collapse
As you may know, those screens are capacitive displays, that means they're activated by sending (very) small amounts of electricity and are kinda "looking for a conductive material" in order to register an input.
The conductive material can be your finger, or something like... a raindrop or your screen, so that's why it thinks you're pressing that part of the screen...
Now it's even more obvious without the screen protector since it's directly on the screen.
As for why the iphone doesn't have issues with that, it does, but the screen being multitouch it's not as bad...
thanks for the info.good to know.
I didn't like the thick screen protector as my thumb/finger seemed to drag and not slide smoothly. I took it off and replaced it with a slightly thinner protector. I'm much happier with the feel now.
Angie
Sent from my X10i using XDA App
@smok3yjk - probably best if you do as Angelahp - get another screen protector on there.
Does anyone have a really sensitive touchscreen?
Sometimes if even a droplet of water falls on or a smear/fingerprint smudge gets on mine, the flipside acts as if it is still being held at that point for me..
Sometimes it's caused hangups in a call, or zooms in indefinitely on some webpage, gets annoying sometimes.
Anyone experienced this or have a fix? I have a hard case, but that's not really helping.
just a thought
I noticed my screen is also very touch sensitive. I prefer it that way verse other android phones I've owned. Maybe a screen protector will give you the effect you are looking for.
Screen protector did the trick for me.