My X5 has lost the Internal SD - Huawei Ideos X5 U8800

I have been using IDEOS X5 U8800 for a good deal of time and it has been running smoothly with MIUI-Elite ROM X1.35 at 1GHz.
A few days ago, without special changes, the battery went flat and switched itself off, so I left it charged overnight.
The next day I turned on the phone and all was good, EXCEPT the internal SD card was not found.
I never used an external SD card, but when I inserted it, it was being detected OK.
So I am worrying if the internal SD partition was entirely lost.
I tried different settings in that "X5 settings by Stgockwell 2011" that switches between Internal SD, External SD, Enable UMS on secondary storage device. Then I rebooted tin Recovery Mode with mounting for USB option. All no good.
Will anyone please give me some insight on how to re-enable the drive and/or retrieve the data? Thanks so much in advance....

After looking around by using ES Explorer I found the photos are located in /HWUserData/DCIM/Camera
however SDCARD or SD-EXT are still not accessible.
Sorry for the freaked out, but I am not sure if they are backup or what. So how I can mount these data back? Thank you.

I had a similar problem,installing stock 2.2.2 rom did the job and corrected the failure. After that i installed b158 and miui 2.33 v3 .35 working flawlesly.

-valvoline- said:
I had a similar problem,installing stock 2.2.2 rom did the job and corrected the failure. After that i installed b158 and miui 2.33 v3 .35 working flawlesly.
Click to expand...
Click to collapse
Thanks buddy! Hope it will never happen again!
To thank you, here are 20% coupon codes for you to purchase at CASESSS.com
F607FC81D99062FC4004
DB8C0C109DF01DF74140

Related

[RETIRED] CyanogenMod 6.1 Beta4 & ClockworkMod Recovery (Updated 2010.12.11)

I have updated ClockworkMod Recovery for the G Tablet to support the internal SD card a bit better.
There is now an advanced option to partition the internal SD card. This can come in handy when the internal partitions get hosed (which seems to happen on occasion with this device). To keep it close to stock you can select a 2048MB Data Partition and the remaining ~13GB will go to the internal SD card. You also have an option to format the internal SD card space as well as mount it as /emmc. You can still format the external SD card using the existing advanced option.
This recovery still uses the external SD card as its primary mount for actions (install ROM, backup, restore, etc.). However, the recovery is configured to “fall back” to the internal SD card for these actions if (and only if) there is no external SD card available to be mounted.
As always, credit to Koush for creating ClockworkMod Recovery in the first place.
----------------------
This is the current BETA release of the CyanogenMod 6.1 port for the G Tablet. There are still several issues, but it is far enough along that I use it as my daily system. Please review issues and post new ones as needed at the Issues page linked below. Feel free to leave feedback in the forum, but I may not be able to follow up on it. The best option is to catch me in #tegratab on Freenode IRC.
CyanogenMod 6.1 Beta4
CyanogenMod 6.1 Beta4 - MD5
ClockworkMod Recovery
My site: bekit.net post
gapps does work, but I probably should not release that here. Just make sure it is the MDPI variety and has an update-binary compatible with tegra.
*Note:
This version now matches the standards for SD card mounting on devices with both internal and external SD card space. This means that the external SD card slot now mounts to /mnt/sdcard (symlink /sdcard) and the internal space mounts to /mnt/emmc (symlink /emmc). The device properly recognizes the internal vs. external space and allows proper unmounting and handling of the external SD card. This also means that some apps (if they were coded poorly) will not recognize the internal SD space as available SD card space and will require you ti insert an external SD card. I will see if I can do something about the default apps (read: camera) that have this problem; other apps will need to be fixed by the developers.
Changelog:
CM6.1 Beta4:
Updated SD mappings for internal/external SD space to match standards (see note above)
Using latest available source from the CyanogenMod repo
Updated kernel to latest G Tablet version (still waiting on source so we can build our own)
Updated to the lasted drivers available for the G Tablet
Included updated libGLESv2 from nvidia (Angry Birds!)
Proper setup of CPU values - this allows the folio Flash APK to install properly
Matched fingerprint and device settings to latest G Tablet values
ClockworkMod Recovery 2.5.1.3 (2010.12.11):
Added options for managing the internal SD card
Using latest available source from the CyanogenMod repo
ClockworkMod Recovery 2.5.1.2 (2010.11.24):
Updated SD mappings to match standards (see note above)
Using latest available source from the CyanogenMod repo
Enjoy!
-Brint (bekit)
Nice may try it on one of the other g tabs I picked up today.
Thanks for all the work
Happy Thanksgiving to you too!!! and I will enjoy this for desert.
Works like a charm! We all love you! Now wish this damn camera would work right >_<
Awesome, Thank you for putting this together!
Do you know if it addresses the slowdown problem that was present in cmb2? (After using it for a while,browsing etc would slow down till you did a reset)
As usual amazing work. Everything is rock steady. Only things I added were Spare Parts to maximize some apps and a certain keyboard replacement that starts with S.
titanium backup is not seeing my internal sd card, is this a known issue? also i'm unable to mount sd or external sd to computer, the window closes when i try to. the rom seems to run smoothly though.
Thank you Bekit!
First time posting here in ages. Is there a trick to getting the audio working? No audio here, except for a freak accident. Not sure how or why it started working out of the blue, rebooted now it's gone again.
happy turkey day!
Crimton said:
titanium backup is not seeing my internal sd card, is this a known issue? also i'm unable to mount sd or external sd to computer, the window closes when i try to. the rom seems to run smoothly though.
Click to expand...
Click to collapse
Same here and Kobo wants /mnt/sdcard. I've uninstalled both and re-installed in case something changed with beta4 that they'd cached but it didn't change anything. I've found the Titanium Backup official support site (www.legendroid.com/forumdisplay.php?27-Titanium-Backup-Official-Support) but haven't done through it yet ... turkey'd almost ready so it may be a while. Folks out east (or north or anywhere that this isn't a holiday) may wanna check in there.
EDIT: Meant to thank you, bekit, for your work on this. Sorry, was distracted by the smell of nearly done turkey!
No SD card here as well. Do I need to install the newest recovery?
Will be kinda hard to download anything.
Thanks for this update! As with all releases, I will try this one out as well. It's great to have choices in firmware, and at this stage, these firmwares are really-REALLY nice.
Happy Thanksgiving to you, too!!!
puppyfarts said:
Thank you Bekit!
First time posting here in ages. Is there a trick to getting the audio working? No audio here, except for a freak accident, not sure how or why it started working out of the blue.
happy turkey day!
Click to expand...
Click to collapse
Try plugging/unplugging the headphones, has worked for me in the past.
Turbo4V said:
Try plugging/unplugging the headphones, has worked for me in the past.
Click to expand...
Click to collapse
Mind=BLOWN! Thanks!
I can't get the recovery installed. Can I get an update.zip?
I can't install anything from the market. I keep getting not enough room on card? I have internal card selected in CM settings.
I tried installing this, making sure to put on the new clockwork and clearing user data, and when I was all done and went to reboot I got "magic value mismatch" no matter what I did. I was able to get into nvrecovery but flashing the old clockwork wouldn't fix it. I finally gave up and flashed the stock image to get going again, blowing away my internal SD titanium backups. Not a huge loss, but if anyone else is thinking about trying this, copy anything important off the internal SD just in case.
*edit*
Whoops, scratch that, apparently the nvrecovery stock image install doesn't wipe the SD, everything was there when I was done and flashed Clockwork again.
This is running well and I am seeing very smooth scrolling in the browser. That has been my biggest complaint with the gtablet.
Spaztik said:
I tried installing this, making sure to put on the new clockwork and clearing user data, and when I was all done and went to reboot I got "magic value mismatch" no matter what I did. I was able to get into nvrecovery but flashing the old clockwork wouldn't fix it. I finally gave up and flashed the stock image to get going again, blowing away my internal SD titanium backups. Not a huge loss, but if anyone else is thinking about trying this, copy anything important off the internal SD just in case.
*edit*
Whoops, scratch that, apparently the nvrecovery stock image install doesn't wipe the SD, everything was there when I was done and flashed Clockwork again.
Click to expand...
Click to collapse
Same thing happened to me. "magic value mismatch" It's not to magic, lol. Off to NVflash I go. (lost everything).
flashed new cwm 2.5.1.2, then flashed beta4... mismatch lameness
anyone figure this out yet?
puppyfarts said:
Thank you Bekit!
First time posting here in ages. Is there a trick to getting the audio working? No audio here, except for a freak accident. Not sure how or why it started working out of the blue, rebooted now it's gone again.
happy turkey day!
Click to expand...
Click to collapse
Try pluging in headphones and then take them out.
Had the same exact problem.
(Oops... missed the fact that it was already answered!)
Thank you SO much! This is finally a usable ROM for this hardware-rich unit.
I have two questions:
1. Can anyone compile/provide a tun.ko file for this kernel? I would like to use VPN Connections on this device.
2. Is anyone else experiencing odd slowdowns after the device wakes up? When I first boot the device works smoothly. After the device is off and then turned back on, I sometimes experience an unbelievably laggy performance...
Thanks in advace!

external sd card not mounted miui

hi folks.
here's the thing. i just flashed miui 2.1.13 .32 kernel. and when i go to file explorer, i can only see my internal sd card. no matter what program i use... same. AND when i pull out extrenal sd card, phone says that there is NO sd card inserted. but when i put it back in, everything is back to same.
help? thank you
try to push the card slightly to one side or the other. That happened to me too and it was the card that wasn't making contact with the phone.
I got the solution with X5-Setting. Here ist a option for internal or external Card
schuessm said:
I got the solution with X5-Setting. Here ist a option for internal or external Card
Click to expand...
Click to collapse
awesome that helped thank you
I'm running .35 kernel, and have noticed that the last few releases of MIUI wont mount the external SD card after a shutdown & startup. It says the SD card is corrupted & needs to be formatted. I even exchanged the SD card for a new one and I still kept getting the problem. I found that rebooting the phone fixes the problem - the SD is now mounted. So it seems to only be a problem after doing a full shutdown - not a restart.
Managed to kill one of my sdcards in the latest miui, it got dced al the time and now i cant write, delete or format it. Have tried it on my laptop without luck. So be careful
Sent from my u8800 using XDA App
revhead27 said:
I'm running .35 kernel, and have noticed that the last few releases of MIUI wont mount the external SD card after a shutdown & startup. It says the SD card is corrupted & needs to be formatted. I even exchanged the SD card for a new one and I still kept getting the problem. I found that rebooting the phone fixes the problem - the SD is now mounted. So it seems to only be a problem after doing a full shutdown - not a restart.
Click to expand...
Click to collapse
Hi,
I have the same problem! If I power on the smartphone from a full shutdown my sdcard (the external one, 16 GB Sandisk) is not mounted, then if I restart the X5 Pro, Android mount correctly my external sdcard.
For this reason I wanted to change sdcard (before I had a Sandisk 4GB) with a new Sandisk 16GB sdcard. The problem is still here
How can I fix this problem?
I flashed a lot of different roms, based on B512, B540, custom gingerbread 2.3.4, Gingerbread by Genokolar, porting U8860 Huawei Honor for X5Pro, CyanogenMod 7.1 but I have always the same problem.
Please developers, find a solution because it is not a nice bug.
Regards,
kalo86
Experiencing the same problem on my U8800, MIUI 2.1.20, 2.6.35 kernel. After shutdown, the sdcard will not mount. Have to reboot to get it to work again.
Hi, I have the same problem and for this reason I opened a new thread discussing this bug.
Have a look here and vote the poll please
http://forum.xda-developers.com/showthread.php?t=1483519
Thank you,
regards,
kalo86
addajjal said:
Managed to kill one of my sdcards in the latest miui, it got dced al the time and now i cant write, delete or format it. Have tried it on my laptop without luck. So be careful
Click to expand...
Click to collapse
Did you try that on Windows tools or with Unix tools?

[Q] Dead SD card reader???

Hi All!
I am a great fan of this forum, Android and my GT540.
I first rooted my phone when is had 2.1, then shifted to the LeWa custom roms and then after the recent update to Miroslav_mm's Project IceScreamSwift I "bit" the bullet and installed this ROM.
Miroslav is an absolute genius, this ICS 4.0.4 ROM is so smooth. I used a 256 MB swap file on my class 4 micro sd and overclocked to 825 Mhz and this thing flys :laugh: I can't believe this GT540 can keep up with the industry's best. The only down side is the 3" screen Thanks Miro!!! Great work.
Anyway, back to my topic. Sadly my SD card reader is not working. I have read on the net that this is a common problem. I wonder whether the swap file had anything to do with it or was it the latest ROM I installed? I'm just wonder whether anybody else had the same problem and is the situation recoverable?
I am going to try and test the card on by PC using and adapter to see if the card is actually gone but I firmly believe it is the reader on the phone since it is not registering or giving any errors. When I tried to mount using the recovery menu it stated no such file or directory.
I read one guy stating that his reader started to work again after some time pasted for no apparent reason. I hope mine does the same
I look forward to your comments. Thanks!
ArchieBall. said:
Hi All!
I am a great fan of this forum, Android and my GT540.
I first rooted my phone when is had 2.1, then shifted to the LeWa custom roms and then after the recent update to Miroslav_mm's Project IceScreamSwift I "bit" the bullet and installed this ROM.
Miroslav is an absolute genius, this ICS 4.0.4 ROM is so smooth. I used a 256 MB swap file on my class 4 micro sd and overclocked to 825 Mhz and this thing flys :laugh: I can't believe this GT540 can keep up with the industry's best. The only down side is the 3" screen Thanks Miro!!! Great work.
Anyway, back to my topic. Sadly my SD card reader is not working. I have read on the net that this is a common problem. I wonder whether the swap file had anything to do with it or was it the latest ROM I installed? I'm just wonder whether anybody else had the same problem and is the situation recoverable?
I am going to try and test the card on by PC using and adapter to see if the card is actually gone but I firmly believe it is the reader on the phone since it is not registering or giving any errors. When I tried to mount using the recovery menu it stated no such file or directory.
I read one guy stating that his reader started to work again after some time pasted for no apparent reason. I hope mine does the same
I look forward to your comments. Thanks!
Click to expand...
Click to collapse
I had kind of a same issue, i was using Miros 4.0 ICS ROM, but went back to SDSL 2.1, i had partitioned my sd card before to have native swap of 256 mb, when i tried to flash SDSL 2.1 by Recovery, it would flash it and all, but it wouldnt install it correctly, every time i tried to reboot the ROM, i got stock on Silver SDSL logo, then i would go back to recovery to try and flash it again, and recovery wouldnt read my sd, i would say E:/ is bad, so i thought i might have been my sd card reader, after flashing by fastboot, there was no problem with my sd card, i was able to use it normally, then i tried to flash it again by recovery but same problem, recovery wouldnt read my sd card, i tried using another SD card and it worked on recovery, so i think something happen to my other SD card when i went back from Miros ICS to SDSL 2.1, the card works correctly but i cant flash any rom using recovery with that SD card.
Hope this helps!
Thanks for sharing your experience!
I will give it a try and let the community know if its :good: for me too.
Bad news people. The above didn't work for me. I tried several different ROMs (including flashing the standard ROM) but no luck.
The SD card reader seems to be "dead". The funny thing was that when the SD card disappeared after a few days use of Miros latest ICS ROM (June.2012) it was still working very smoothly despite the lack of the 256MB swap file and SD card. Ofcourse many of the installed apps disppeared too. Now that my sd card doesn't work I can't go back to the ICS ROM since it is only available in "recovery" form. Does anyone know if a "fastboot" form exists?
Now that I have lost the SD card feature I will not be able to use the phone anywhere near its full potential. Very sad indeed. Time for a new phone
Unless anybody else has a solution for the above......the moral of the story is be very careful with ROMs and SD card usage as pointed out by our esteemed developers.
Just for reference only, my last setup when the SD reader was working was (2 GB SD) partitioned as follows:
partition 1: data 1.5 GB
partition 2: ext4 0.25GB for Link2SD
partition 3: swap 0.25GB
Hm you already tried to clean the SD ston on your phone ? maybe it just bacame dirty with the time.
Thanks for the comment andreas! but could you please explain the meaning of "SD ston"?
If you mean the pins in the reader, they appear to be clean.
ArchieBall. said:
Thanks for the comment andreas! but could you please explain the meaning of "SD ston"?
If you mean the pins in the reader, they appear to be clean.
Click to expand...
Click to collapse
oops slot of course yeah okay
Just and update for those interested.
I finally got my hands on an external card reader and discovered my 2 gb card is actually dead. I remember taking a about 30 photos that day when it had the newly installed Miro's ICS and noticed it locked several times. I don't know if that had anything to do with it. Anyway, my PC did not recognize the card had been inserted so I couldn't reformat/revive it.
I tried to insert a new 4 gb card into my phone today again (previous attempts failed) but before doing so I carefully bent the connectors in the card reader slightly outward, inserted the card, jammed a piece of paper under the clip (so it would press down and make good contact) and believe it or not it read the card I have since installed "AOKP 4.0.4 ASIS b40" and loven' it.

[Q] Huawei U8800 Can't install Aurora from 2.3GB (B528)

Hi guys, I have the Huawei U8800 and it has the Official Gingerbread (2.3.5) B528 ROM and I read that I need to have 2.3.5 to upgrade to Aurora ROM, I did root the device and installed Clockwork Mod 5.5.0.4 which is compatible with that rom. I did wipe dalvik cache, wiped user data and all that. But when I flash the rom, it gets stuck on the Huawei Boot Screen and when I turned it off and on again it installed Android 2.3.5 on its own. On the screen it said upgrade firmware step 1 out of 2, do not turn off device. Any help would be appriecated as I have searched high and low for a solution, so I did try to find someone with a similar problem but I still can't solve it.
I'm sorry, but I think you are not following the steps properly. Make sure you go through all steps thoroughly.
I DON'T KNOW IF YOU NEED CUSTOM PARTITION BUT I RECOMMEND YOU CUSTOM PARTITION YOUR PHONE SO YOU CAN INSTALL BIGGER ROMS!!! (here)
Go to my Xperia Style GB ROM (in my signature) and follow the steps there install a ROM, but use Aurora instead of my ROM.
I think the 2.3 GB ROM installs again before you still have the 'dload' folder on your sd card. The phone detects it and starts installing it again.
Wow thanks for such a quick reply, I will try to follow your steps. Thanks a lot!
rqmok said:
I'm sorry, but I think you are not following the steps properly. Make sure you go through all steps thoroughly.
I DON'T KNOW IF YOU NEED CUSTOM PARTITION BUT I RECOMMEND YOU CUSTOM PARTITION YOUR PHONE SO YOU CAN INSTALL BIGGER ROMS!!! (here)
Go to my Xperia Style GB ROM (in my signature) and follow the steps there install a ROM, but use Aurora instead of my ROM.
I think the 2.3 GB ROM installs again before you still have the 'dload' folder on your sd card. The phone detects it and starts installing it again.
Click to expand...
Click to collapse
Hey, I followed your steps but still stuck on the bootscreen. I followed your steps exactly as they are, I don't know what im doing wrong :/
rqmok said:
I'm sorry, but I think you are not following the steps properly. Make sure you go through all steps thoroughly.
I DON'T KNOW IF YOU NEED CUSTOM PARTITION BUT I RECOMMEND YOU CUSTOM PARTITION YOUR PHONE SO YOU CAN INSTALL BIGGER ROMS!!! (here)
Go to my Xperia Style GB ROM (in my signature) and follow the steps there install a ROM, but use Aurora instead of my ROM.
I think the 2.3 GB ROM installs again before you still have the 'dload' folder on your sd card. The phone detects it and starts installing it again.
Click to expand...
Click to collapse
Elora ROM
UPDATE: I managed to installed the Elora ROM which is based on Aurora ROM and is working just fine! Thanks. Also I tried your ROM the Sony Ericsson Themed GB and it worked also . But somehow when I used your partition guide I messed up my phones internal memory (2GB) and I cannot access it from my computer.
se7entijz said:
UPDATE: I managed to installed the Elora ROM which is based on Aurora ROM and is working just fine! Thanks. Also I tried your ROM the Sony Ericsson Themed GB and it worked also . But somehow when I used your partition guide I messed up my phones internal memory (2GB) and I cannot access it from my computer.
Click to expand...
Click to collapse
That doesn't mean it is messed up.
The custom partition takes memory from your internal sdcard and dedicates it to your phone's internal memory. So, your internet sdcard's memory goes from 2GB to 1.46GB, and your phone's internal memory shoots to 1.2GB. This way, you can install bigger ROMs on your phone and install more apps on your phone.
I don't know about accessing the internal sdcard from your computer because I never even tried doing it.
Ok I managed to find a program on the PC that can read the internal sd card and it worked great! The weird thing is, I installed an Updated version of the same ROM (Elora 1.7.28) and it was much more unstable than the previous version, to be frank Im trying to understand if the developer is still updating the ROM or not since it is dated from 2012.
For example, downloading apps from the market were extremely slow and when I connected the phone to the PC, the PC didn't even detect I connected my phone and apart from that, usually in android it tells you to connect your device for usb storage, Android didn't even give me that.
So I restored to a backup I made of the previous version of the ROM (Elora v1.1.10 something like that) and connected to the PC works fine, android tells me for usb storage, and downloading apps from the market is extremely fast.
Although the phone is working quite well (Elora V1.1), some games like Real Racing 3, Frontline Commando and Frontline Commando D-Day didn't work. Apart from that its working quite well. Sorry for the long text.
rqmok said:
That doesn't mean it is messed up.
The custom partition takes memory from your internal sdcard and dedicates it to your phone's internal memory. So, your internet sdcard's memory goes from 2GB to 1.46GB, and your phone's internal memory shoots to 1.2GB. This way, you can install bigger ROMs on your phone and install more apps on your phone.
I don't know about accessing the internal sdcard from your computer because I never even tried doing it.
Click to expand...
Click to collapse
se7entijz said:
Ok I managed to find a program on the PC that can read the internal sd card and it worked great! The weird thing is, I installed an Updated version of the same ROM (Elora 1.7.28) and it was much more unstable than the previous version, to be frank Im trying to understand if the developer is still updating the ROM or not since it is dated from 2012.
For example, downloading apps from the market were extremely slow and when I connected the phone to the PC, the PC didn't even detect I connected my phone and apart from that, usually in android it tells you to connect your device for usb storage, Android didn't even give me that.
So I restored to a backup I made of the previous version of the ROM (Elora v1.1.10 something like that) and connected to the PC works fine, android tells me for usb storage, and downloading apps from the market is extremely fast.
Although the phone is working quite well (Elora V1.1), some games like Real Racing 3, Frontline Commando and Frontline Commando D-Day didn't work. Apart from that its working quite well. Sorry for the long text.
Click to expand...
Click to collapse
I don't know about all those errors because I never tried Elora. But, the developer is obviously not working on it anymore. (Don't know where the developer is )
I decided to jump ship and go back to 2.3.5 using your Xperia Style ROM, it's much much much more smooth.
rqmok said:
I don't know about all those errors because I never tried Elora. But, the developer is obviously not working on it anymore. (Don't know where the developer is )
Click to expand...
Click to collapse
se7entijz said:
Hi guys, I have the Huawei U8800 and it has the Official Gingerbread (2.3.5) B528 ROM and I read that I need to have 2.3.5 to upgrade to Aurora ROM, I did root the device and installed Clockwork Mod 5.5.0.4 which is compatible with that rom. I did wipe dalvik cache, wiped user data and all that. But when I flash the rom, it gets stuck on the Huawei Boot Screen and when I turned it off and on again it installed Android 2.3.5 on its own. On the screen it said upgrade firmware step 1 out of 2, do not turn off device. Any help would be appriecated as I have searched high and low for a solution, so I did try to find someone with a similar problem but I still can't solve it.
Click to expand...
Click to collapse
remove dload folder on your internal and external sd card before flashing new rom
Yeah, in fact that did cross my mind. Yesterday I managed to repartition my card now I have ~2GB to install applications (Internal SD Card) thx guys. But I do have a problem Real Racing 3 tells me insufficient space although I do have enough space and it is installed on the internal SD Card and not the SD Card.
Unicorn9x said:
remove dload folder on your internal and external sd card before flashing new rom
Click to expand...
Click to collapse

S7 Memory card says corrupt after root

Hi
Everytime I root this verizon S7 G930U after a couple mins the 16gb card says it is corrupt it tries to format it but doesnt work when I pull it out put it in computer it is fine
Thank you for your time I think it happened after I ran v15 fix debloat
Edit unroot back to stock problem fixed
Do you have a different card to try?
JimmyJammm said:
Do you have a different card to try?
Click to expand...
Click to collapse
Yes plus it did it to first card I had which was from previous phone. I got a new samsung card was working fine till I re rooted dunno if it happened before or after I ran the debloater. If I re loaded it will be good again
It tries to format but still comes up corrupt pc says its fine
stevosdiesel said:
Hi
Everytime I root this verizon S7 G930U after a couple mins the 16gb card says it is corrupt it tries to format it but doesnt work when I pull it out put it in computer it is fine
Thank you for your time I think it happened after I ran v15 fix debloat
Edit unroot back to stock problem fixed
Click to expand...
Click to collapse
I am observing a similar problem. This week I decided to move up from my marshmallow-powered Verizon Galaxy Nexus (i515) to a brand new Verzion Galaxy S7 (G930V) that came with PH1 firmware. Shortly after rooting the stock ROM I noticed that the phone labeled my external sdcard (PNY Elite 200GB UHS-I) as "corrupted" in the settings. I wrote this off to my experimentation with adoptable storage. Reformatting portable storage in settings did not fix the issue; returning to stock did. I then started playing with the couple versions of stang5litre's ROM in the development thread. The same thing kept on happening: at some point the portable storage in settings became labeled "corrupted." Again, I didn't think much of it because I was jumping back and forth between stang5litre's versions and stock to compare features and figured I was doing the corrupting.
As it turns out, the sdcard really isn't corrupted.
Scanning the sdcard on my Windows PC with CHKSK reveals no errors.
Scanning the unmounted sdcard in Android via adb (fsck.exfat /dev/block/mmcblk0) produced no errors.
I can mount /dev/block/mmcblk0p1 to /mnt/media_rw and access the sdcard data.
If the sdcard "corruption" is happening with rooting, I wonder if the solution is in a SuperSU setting.
msbrown74 said:
I am observing a similar problem. This week I decided to move up from my marshmallow-powered Verizon Galaxy Nexus (i515) to a brand new Verzion Galaxy S7 (G930V) that came with PH1 firmware. Shortly after rooting the stock ROM I noticed that the phone labeled my external sdcard (PNY Elite 200GB UHS-I) as "corrupted" in the settings. I wrote this off to my experimentation with adoptable storage. Reformatting portable storage in settings did not fix the issue; returning to stock did. I then started playing with the couple versions of stang5litre's ROM in the development thread. The same thing kept on happening: at some point the portable storage in settings became labeled "corrupted." Again, I didn't think much of it because I was jumping back and forth between stang5litre's versions and stock to compare features and figured I was doing the corrupting.
As it turns out, the sdcard really isn't corrupted.
Scanning the sdcard on my Windows PC with CHKSK reveals no errors.
Scanning the unmounted sdcard in Android via adb (fsck.exfat /dev/block/mmcblk0) produced no errors.
I can mount /dev/block/mmcblk0p1 to /mnt/media_rw and access the sdcard data.
If the sdcard "corruption" is happening with rooting, I wonder if the solution is in a SuperSU setting.
Click to expand...
Click to collapse
Same exact thing here installed stang all was good I believe until I installed xposed I pulled the card for now last time I had not installed xposed & it happened real quick after root. First time I rooted installed xposed & it happened right away. Second time right after root no xposed. Third time had it rooted 3 days all good installed xposed couple reboots later did it again wtf lol. Im a boat heavy diesel mechanic working 16-18 hrs a day so with the time consumption of all this I get a little cross eyed at times lol thanks
msbrown74 said:
If the sdcard "corruption" is happening with rooting, I wonder if the solution is in a SuperSU setting.
Click to expand...
Click to collapse
I played around with various SuperSU options to no avail.
What is the mount point of the external sdcard supposed to be?
msbrown74 said:
I played around with various SuperSU options to no avail.
What is the mount point of the external sdcard supposed to be?
Click to expand...
Click to collapse
I think /whatever u named or labeled card not %100 though
I took things all the way back to stock and have been going in slow steps, letting things sit for a bit between steps to see the moment when the portable sdcard gets "corrupted". I also made sure to diligently follow instructions.
Stock Verizon S7 (G930V, PE1) - SD card good
Rooted following psouza4's pinned guide - SD card good
FlashFire'd S7_or_S7Edge_Fixes_V15.zip - SD card good
FlashFire'd xposed-v85.1-sdk23-arm64-custom - SD Card good
ADB installed Xposedinstaller_3.0_alpha4.apk - SD Card good
SDcard is apparently /dev/block/vold/public:179,1 which mounts to /mnt/media_rw/5075-2B3F as exfat. /mnt/media_rw/5075-2B3F is mounted to /storage /5075-2B3F as sdcardfs.
I'm guessing the "5075-2B3F" is my card label.
Going to let things sit for a few days before I try out stang5litre's V2 ROM again.
msbrown74 said:
I took things all the way back to stock and have been going in slow steps, letting things sit for a bit between steps to see the moment when the portable sdcard gets "corrupted". I also made sure to diligently follow instructions.
Stock Verizon S7 (G930V, PE1) - SD card good
Rooted following psouza4's pinned guide - SD card good
FlashFire'd S7_or_S7Edge_Fixes_V15.zip - SD card good
FlashFire'd xposed-v85.1-sdk23-arm64-custom - SD Card good
ADB installed Xposedinstaller_3.0_alpha4.apk - SD Card good
SDcard is apparently /dev/block/vold/public:179,1 which mounts to /mnt/media_rw/5075-2B3F as exfat. /mnt/media_rw/5075-2B3F is mounted to /storage /5075-2B3F as sdcardfs.
I'm guessing the "5075-2B3F" is my card label.
Going to let things sit for a few days before I try out stang5litre's V2 ROM again.
Click to expand...
Click to collapse
I installed G930U firmware half the battle is over right there most the bloatware is gone. Rooted & cleaned up a little more no xposed yet gotta get some rest. I'll tell u though when I factory re setted off stang v2 I got stuck on activation screen still said stang but corrupted tried everything to no avail no odin cause usb debug is now deactivated. Then I tried power vol up & down keys & home up comes maint boot where one option is to turn on usb debug. Restart to download odin recognises its all good from there
stevosdiesel said:
I installed G930U firmware half the battle is over right there most the bloatware is gone. Rooted & cleaned up a little more no xposed yet gotta get some rest. I'll tell u though when I factory re setted off stang v2 I got stuck on activation screen still said stang but corrupted tried everything to no avail no odin cause usb debug is now deactivated. Then I tried power vol up & down keys & home up comes maint boot where one option is to turn on usb debug. Restart to download odin recognises its all good from there
Click to expand...
Click to collapse
I'm sitting on four days rooted no problems. Used G 930U used fix & not fix & debloat as I used originaly, debloated myself using SD maid pro which is pretty handy no xposed yet gotta get a little more rest before that case it goes bad lo do want xposed mainly for extra stuff for greenify. I Just want to say thanks to everyone here for all the information gathered here. You usually won't here much from me here as I usually try to work through my problems just reading, don't like to bother people. Thanks so much again
I have the same issue, tried 6 different cards which all work on other cells and my pc. I am back to factory now and cards still do not work on my s7
daweeze02 said:
I have the same issue, tried 6 different cards which all work on other cells and my pc. I am back to factory now and cards still do not work on my s7
Click to expand...
Click to collapse
As of now I have everything working including xposed w/ greenify. its been almost a week all is stable. Dont know the exact cause maybe overzealous de bloat. Don't use package disable as this is for non root anyway, I think I used it on first 2 foul ups uninstalled it after root maybe it was too late. Also I just used the fix & not the debloat/fix although I have no Idea if that had any effect the first two times. I've been using SD maid pro to debloat & maintain once u get it figured out its real nice just be careful as default settings are safe but there are settings that will allow you to take yourself down I know from experience lol. Once this symptom happens I dont think there is an easy fix gotta re load . I also think leaning to the conservative side of debloating might help. Right now mine is as close to perfect as I could hope for after four failed attempts. Thanks to u all

Categories

Resources