Database Users

official jellybean 4.1.1 for the galaxy s3

hi guys just thought id let you all know that samsung has officially released jellybean 4.1.1 for the galaxy s3 in poland !!!
those of you that are patiently waiting for this update wait now more.
How to Update Galaxy S3 to Official XXDLIB Android 4.1 Firmware
[Important] If you flash this firmware over a custom ROM or a Galaxy S3 from another country than Poland, you might need to wipe the data on the phone to make the firmware boot up properly <<< (i did not wipe my data and it flashed perfectly
To be sure you do not lose any data, backup your Apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you. The SD card contents are always safe, so there is no need to back up those. Only backup apps and personal data.
NOTE: Don’t forget to at least note down your network’s APN settings, which are required to make mobile data work. Go into Settings » More » Mobile Networks, click on the APN that is in use, then note down the setting for each field. While APN settings should be automatically restored from network, you can enter them manually if needed to make mobile data work. You can also find your APN details → here.
Download and install the software Kies on your computer, which will install the necessary drivers for the phone.
Download Kies
You can also download the drivers directly — download from here: 32 bit (x86) Windows | 64-bit (x64) Windows
Download the firmware.
Download XXDLIB | Alternate Link | Filename: GT-I9300_XEO_1_20120922093900_w8pdod73hi.zip
Extract the GT-I9300_XEO_1_20120922093900_w8pdod73hi.zip file on the computer to obtain a file named I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5 (ignore the file named SS_DL.dll).
Download the Odin PC software. If you are new to this, Odin is what is used to flash stuff – firmware, kernels, etc. – on Samsung phones. We’ll use Odin to flash the firmware file obtained in step 4.
Download Odin3 v3.04 | Filename: Odin3_v3.04.zip
Extract the contents of the Odin3_v3.04.zip file to a folder on your computer.
Now, turn off your Galaxy S3 and wait for it to shut down completely.
Then, put the phone into download mode. To do so, press and hold these keys together: Volume Down + Home + Power till the screen turns on. Then press Volume Up to enter download mode.
Open Odin by double-clicking on the Odin3 v3.04.exe file obtained in step 6 after extracting Odin3_v3.04.zip.
Important! Connect your phone to PC now. You should get the message “Added !!” under Odin’s message box in the bottom left.
If you don’t get this message, make sure you installed drivers correctly (using Kies or directly) as given in step 2. If it still doesn’t work, try changing to another USB port on the computer and also use the USB ports on the back if you have a desktop PC.
Click on the PDA button in Odin, then browse to and select the I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5 file obtained in step 4 above.
Important! Do not make any other changes in Odin !!!. Leave all other options as they are. Make sure Re-Partition check box is not selected.
Now, click the Start button to start flashing the firmware on your phone. When the flashing is complete and is successful, you’ll get a PASS message (with green background) in the left-most box at the very top of the Odin, and the phone will automatically reboot. When you see the Samsung logo, you can safely unplug the cable.
IF you have any questions or you get stuck let me know

Sigh...
Sent from my GT-I9300 using xda premium

Omg really!!!!! Wow thanks!!! What's your PayPal I want to send a donation for this amazing find...
Sent from my GT-I9300 using xda premium

Jeez wrong forum old news wrong information .
Over excited 11 poster i guess.
Reported .
RULES
Only the following topics are allowed in the DEVELOPMENT area:
[DEV] - Development for any projects or Apps.
[ROM] - Custom ROMs.
[KERNEL] - Custom Kernels.
[MOD] - Hack & Modifications for the phone. (See below for more details)
[FIX] - Fixes for known issues & bugs.
[R&D] - Research & Development for Devs only, when gathering data for a new projects.
Note: If you are unsure where your new topic should go, then please post it in General.
jje

Moved to general and closed
1) repost
2) development section is not the right place for this sort of thing.

Success: Bypassing *samsung account* lock after factory reset

Hi all, before I forget about this and move on, I just thought I'd share my experience, as most "fixes" for the Factory Reset Protection that I could find online related to google account-based lockout, rather than samsung account-based lockout. The lockout in question says something like "This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm it belongs to you."
Apologies for the vagueness of the final step (5) below - I wasn't setting out to document what I did, so wasn't taking notes. I am in a rush now but when I have time I'll try to be more specific. Perhaps someone else may jump in with their detailed experience in the meanwhile!
Background: My workplace passed on to me a used Galaxy E7 (specifically SM-700H). Not knowing about the infuriating "Factory Reset Protection" protection, I simply wiped it via the stock bootloader the moment I got it. Then I discovered it was now locked - and that the previous user/employee had walked without sharing the samsung account and password used. All purchase info etc lost in the mists of office disorganization so no chance of an unlock via Samsung, I assumed .
Anyway, so I found the installed 5.1.1 rom (specifically, LMY47X.E700HXXU1BPA1) was resistant to tricks I read elsewhere designed to give access to the phones settings, so I downgraded to an older kitkat rom, then found I could access settings from that, as this hole presumably hadn't been patched. The following worked for me:
1. Download ODIN (I used ver 3.11)
2. Download a stock kitkat rom to use to downgrade to. I used E700HXXU1AOE4 which is from Nepal I think, but the region doesn't seem to matter. (Most free firmware download pages are deliberately crippled, I found they are super slow and always timed out before completing; but this free page has fast downloads: http://www.theandroidsoul.com/galaxy-e7-stock-firmware/#jump-model-no-sm-e700h )
3. Flash that newly downloaded firmware using ODIN (you can use the instructions here: "How to Install/Update Official Firmware on Galaxy E7 SM-E700H Manually through Odin:" http://www.androidofficer.com/2016/01/e700hxxu1bpa1-android-511-xxu1bpa1.html )
4. Boot up, connect to the internet via wifi. I signed into my google account at some point, but not sure if that was necessary. That step comes before the Samsung Account lockout screen presents itself.
5. (SORRY this is a little vague, will come back to it later, but trust me, this worked for me!) Click about through the several available pages and settings which appear before the Samsung Account lock page until you find any piece of disclaimer/info text, I was looking for some which included a URL, but it turned out I think that wasn't even required. Highlight some text, touch it again, and look for a search/globe/internet icon. Amazingly, that will launch the phone's search function via google now/its internal browser.
6. At that point, you're essentially outside of the "lockdown" intro screens. What i did was put the word "settings" into the google now search box, then at the bottom of the results page, slid the category slider from the default "web" results source, past "apps" and "images" etc across to "phone", which delivered a link to the phone's actual settings.
7. At that point, you can drill down to "Security" then deactivate the "Reactivation lock" setting, enable developer mode, unsigned apps, etc - whatever you feel needs doing - then restart the phone in the normal manner. The setup screen is back after restart, but without the lockout. Voila, a working phone.
Notes: So no need to download sideload any external apks. Also a gotcha - I subsequently created a new random Samsung Account to sign into, because i was afraid the unknown samsung account lockout curse would return - then i noticed that by signing in to that, it had once again ticked the "Reactivation lock" setting - watch out for that!

[ROM] Note 7 Grace Ux For J7 (2016)

Before we begin, lets start this Formally
Disclaimer!
IM NOT RESPONSIBLE IF YOU BRICK YOUR GORGEOUS SMARTPHONE OR DECIDE TO BE CARELESS OR CREATE A CYCLONE... you know the drill.
SAMSUNG GALAXY Note 7 Rom Port to J7 (2016)
Provided to this thread is the Galaxy Note Rom full port with "Partitial" Grace Ux
BUT BEFORE WE BEGIN THE WHOLE CREDIT GOES TO AMIT ANAND FOR THE ROM ~~~~~
Rom features....
-
- VoLTE is supported most important (INDIANS)
- Rooted with supersu
- Busybox
- zipaligned
- deodexed
- Grace Ux
- build.prop Tweaks
- The Sound Volume is 40% increased
NOTE: This Rom should work on J710FN (tested) but also work on other models,not tested
Procedure :-
Before we start make sure you have official TWRP installed
1] make sure you take Efs Backup in your Ext Sd card
2] then go to wipe/formate data type "yes" and press ok or enter button on the keyboard
3] then go back to wipe/advance wipe then wipe data,system,dalvik cache,cache,internal Storage
4] now go to install select the storge as ext sd card and flash the rom
5] reboot the phone finish the setupwizard (remember dont login into google before you complete all the steps)
Then go to settings > Lock screen and security > Other Security settings > (disable send security report) > Security Policy updates (Disable the auto update)
6] then go to twrp and flash ( OverRide System Permissions.zip ) ,( xposed.zip) ,( csc repaired.zip)
7] then reboot the device
NOTE : The icons in the Theme of Amit Anand are bit pixeled if u dont like the them u can switch to the default theme where the icons are better its a pure note 7 port !!!:silly:
I PREFER USING GOOD LOCK WITH IT.....THE LATEST APK LINK IS IN DOWNLOAD SECTION ~~
ENJOY !!:laugh:
SCREENSHOTS ARE IN ATTACHMENTS
DOWNLOAD:-
ROM ~ Mod edit link removed

Where is the bugs section.
Mentions some bugs pls
I see in SS some bloatware like fb and google photos.. are they included?
- what is overRide system permission?
- csc repair can be included in the ROM ?

Copyrights Provoked
i did not give any permissions or rights to share this rom or my entire work of xposed or override system permission you done a serious mistake on posting my work (the rom what i had given you was for testing not to share my work) and i told you 100 times not to share the rom before giving it and after giving it also i told you clearly not to post it. you dont have any rights on my work as for this i dont want any credits i just want this page to shutdown immediately i complained to the xda moderators of copyrights of my work

Thread Closed as OP does not have permission to share
Regards
Sawdoctor

[GUIDE] unlock APN settings on stock firmware

if you have a problematic firmware that won't allow you to edit your APN settings in the dialer hidden menu, this may be what you need.
first, the warnings:
1. THIS IS ONLY FOR SPRINT SAMSUNG PHONES RUNNING TOUCHWIZ ROMS!!! never attempt on any other carrier or manufacturer's device or alternate roms! it should most likely work on other Samsung Sprint devices with stock/touchwiz roms.
2. DEPENDING ON DEVICE, YOU ARE MOST LIKELY TO BE FORCED TO FACTORY RESET YOUR DEVICE IN THE PROCESS, which likely includes LOSS OF ALL DATA ON INTERNAL SD!! take all necessary precautions.
3. ROOT REQUIRED
4. you will STILL NEED your MSL number!!!
5. have a FULL backup in TWRP ready in case anything goes wrong. INCLUDE your EFS in the backup!!! again, INCLUDE YOUR EFS. make sure it's stored on EXTERNAL sd card. again, EXTERNAL SD CARD!!! or copy it to your PC if you don't have an external card.
here's the short but sweet guide.
1. download "Samsung Phone Info" from Google Play
2. swipe over to the CSC section.
here you should see:
Firmware's CSC Code
Active CSC Code
Available CSC Code
3. if Firmware's AND Active both say XAS, you should already be able to edit your APNs using your MSL number.
if Firmware and Active codes do not match, you have a dirty rom and I am unable to help you correct it, you'd best try a different stock based rom or 3rd party that allows it by default.
if Available CSC Codes does NOT include "XAS" then whoever modified the customized stock touchwiz rom you're using removed it and you'd best try a different stock based rom or 3rd party that allows it by default.
4. using any CSC editor, change "SPR" in ALL places it appears as only the 3 letters "SPR" to XAS
5. confirm changes and reboot. you will now most likely lose ALL personal data on your phone and should now be able to edit your APN using your MSL inside the dialer's hidden menu.

Sterist said:
if you have a problematic firmware that won't allow you to edit your APN settings in the dialer hidden menu, this may be what you need.
first, the warnings:
1. THIS IS ONLY FOR SPRINT SAMSUNG PHONES RUNNING TOUCHWIZ ROMS!!! never attempt on any other carrier or manufacturer's device or alternate roms! it should most likely work on other Samsung Sprint devices with stock/touchwiz roms.
2. DEPENDING ON DEVICE, YOU ARE MOST LIKELY TO BE FORCED TO FACTORY RESET YOUR DEVICE IN THE PROCESS, which likely includes LOSS OF ALL DATA ON INTERNAL SD!! take all necessary precautions.
3. ROOT REQUIRED
4. you will STILL NEED your MSL number!!!
5. have a FULL backup in TWRP ready in case anything goes wrong. INCLUDE your EFS in the backup!!! again, INCLUDE YOUR EFS. make sure it's stored on EXTERNAL sd card. again, EXTERNAL SD CARD!!! or copy it to your PC if you don't have an external card.
here's the short but sweet guide.
1. download "Samsung Phone Info" from Google Play
2. swipe over to the CSC section.
here you should see:
Firmware's CSC Code
Active CSC Code
Available CSC Code
3. if Firmware's AND Active both say XAS, you should already be able to edit your APNs using your MSL number.
if Firmware and Active codes do not match, you have a dirty rom and I am unable to help you correct it, you'd best try a different stock based rom or 3rd party that allows it by default.
if Available CSC Codes does NOT include "XAS" then whoever modified the customized stock touchwiz rom you're using removed it and you'd best try a different stock based rom or 3rd party that allows it by default.
4. using any CSC editor, change "SPR" in ALL places it appears as only the 3 letters "SPR" to XAS
5. confirm changes and reboot. you will now most likely lose ALL personal data on your phone and should now be able to edit your APN using your MSL inside the dialer's hidden menu.
Click to expand...
Click to collapse
Have you found a way to retrieve your MSL without calling sprint? I've tried all the tool apps in the play store and using a logcat within the ##3282# menu with no luck. Getprop ril.MSL yields nothing, not even a not found error.
I've tried calling sprint for my MSL but refuse to release it.. I'm not exactly on their "nice" list - they've even called to tell me I'm "using too much of my [UNLIMITED] data" many times so I don't expect much from them anymore..
Any help or direction would be greatly appreciated

try the Sprint chat -- through the website, NOT Facebook, and have a good reason ready as to why you need the MSL, other than for bypassing their security lol

Holy **** after searching high and low I have FINALLy found a way to get back editing my APNS for hotspot on my rooted Sprint Note 5! AND I keep Android Pay! Thanks so much!!
This works perfectly! Only thing is turn on hotspot option disappeared from settings. I can turn it on and off from the top bar if I swipe down. OR I can download a hotspot shortcut app and access it from that app.
Also I noticed my icons for LTE now say 4G and the bars are different too - more old school.
I noticed I changed EVERY SPR to XAS - do ALL of them NEED to be changed to enable APN editing? Can I switch back the ones that give me back hotspot option in settings and stock LTE & bars icons?
Sterist said:
if you have a problematic firmware that won't allow you to edit your APN settings in the dialer hidden menu, this may be what you need.
first, the warnings:
1. THIS IS ONLY FOR SPRINT SAMSUNG PHONES RUNNING TOUCHWIZ ROMS!!! never attempt on any other carrier or manufacturer's device or alternate roms! it should most likely work on other Samsung Sprint devices with stock/touchwiz roms.
2. DEPENDING ON DEVICE, YOU ARE MOST LIKELY TO BE FORCED TO FACTORY RESET YOUR DEVICE IN THE PROCESS, which likely includes LOSS OF ALL DATA ON INTERNAL SD!! take all necessary precautions.
3. ROOT REQUIRED
4. you will STILL NEED your MSL number!!!
5. have a FULL backup in TWRP ready in case anything goes wrong. INCLUDE your EFS in the backup!!! again, INCLUDE YOUR EFS. make sure it's stored on EXTERNAL sd card. again, EXTERNAL SD CARD!!! or copy it to your PC if you don't have an external card.
here's the short but sweet guide.
1. download "Samsung Phone Info" from Google Play
2. swipe over to the CSC section.
here you should see:
Firmware's CSC Code
Active CSC Code
Available CSC Code
3. if Firmware's AND Active both say XAS, you should already be able to edit your APNs using your MSL number.
if Firmware and Active codes do not match, you have a dirty rom and I am unable to help you correct it, you'd best try a different stock based rom or 3rd party that allows it by default.
if Available CSC Codes does NOT include "XAS" then whoever modified the customized stock touchwiz rom you're using removed it and you'd best try a different stock based rom or 3rd party that allows it by default.
4. using any CSC editor, change "SPR" in ALL places it appears as only the 3 letters "SPR" to XAS
5. confirm changes and reboot. you will now most likely lose ALL personal data on your phone and should now be able to edit your APN using your MSL inside the dialer's hidden menu.
Click to expand...
Click to collapse

elcidroyale said:
Holy **** after searching high and low I have FINALLy found a way to get back editing my APNS for hotspot on my rooted Sprint Note 5! AND I keep Android Pay! Thanks so much!!
This works perfectly! Only thing is turn on hotspot option disappeared from settings. I can turn it on and off from the top bar if I swipe down. OR I can download a hotspot shortcut app and access it from that app.
Also I noticed my icons for LTE now say 4G and the bars are different too - more old school.
I noticed I changed EVERY SPR to XAS - do ALL of them NEED to be changed to enable APN editing? Can I switch back the ones that give me back hotspot option in settings and stock LTE & bars icons?
Click to expand...
Click to collapse
this **might** be fixed by renaming (or deleting, if you're brave) the features.xml file, if I remember correctly, stored in system/csc/ or system/etc/ not sure honestly
features.xml.backup should do just fine.
if the rom doesn't boot afterwards or if the dragons catch all your apps on fire, go back to recovery and use TWRP's file manager to change it back
also, any xposed app (like wanam's) or other feature.xml adjusting apps (like GalaxyTools or Samsung Phone Info) can cause the problem to happen again.
the alternative / temporary / dirty-fix would be to create a shortcut to hotspot on your home screen:
1. download Activity Launcher from Google Play
2. launch and change recent activities to all activities
3. wait approximately 72 years for it to load
4. scroll to Settings and tap it
5. scroll to Hotspot and long-press it
6. tap create shortcut
7. never uninstall Activity Launcher -- instead just make it a hidden app (it's very small anyways)

I can just longpress hotspot toggle in slide down drawer from top no probz. Which CSC settings modifies the ability to edit APN? I want to put the rest back to SPR.
Sent from my SM-N920P using Tapatalk

I used the msl code and everything appears the way you say it should... but the phone STILL says invalid sim!
What internal file must be deleted, the thing is unlocked on sprints end it just wont let go !

Phyzic said:
Have you found a way to retrieve your MSL without calling sprint? I've tried all the tool apps in the play store and using a logcat within the ##3282# menu with no luck. Getprop ril.MSL yields nothing, not even a not found error.
I've tried calling sprint for my MSL but refuse to release it.. I'm not exactly on their "nice" list - they've even called to tell me I'm "using too much of my [UNLIMITED] data" many times so I don't expect much from them anymore..
Any help or direction would be greatly appreciated
Click to expand...
Click to collapse
see this thread.. https://forum.xda-developers.com/sprint-galaxy-s5/general/guide-how-to-msl-code-t3628728 ....theres the rooted way...and i also posted the non rooted way....

Hello,
I rooted Sprint Note 5 from Nougat to Magisk and went ahead to replace SPR into XAS in all files under system/CSC folder. APN Type is still coming greyed out. Any help will be appreciated.
-Sunny

[YT3-X90L] Lock state - locked - Recovery image needed

Hello XDA-Community,
I've got a Yoga Tab 3 Pro YT3-X90L from a customer.
He was telling me, that he wanted to unlock his device with the pattern, mismatched for several times and now its locked and requires the owners google account. Or something like that. He never had the owners google account. He told me that his seller has activated his device for him. And he has no clue who it was.
Now here is my part.
I've researched and obviously it's a FRP. The owners google account information are stored in the FRP-Partition. And this partition won't get deleted with a simple factory resett.
What i've tried so far:
1.) https://www.youtube.com/watch?v=nCzrnnh2K1w I was able to follow this tutorial to minute 9:08. But the option "Email and password" is not there anymore. I guess they patched it with 6.0.1.
2.) I tried to flash a stock rom or twrp with LenovoDownloader(QcomDLoader). The stock rom file is: Lenovo_Yoga_Tablet_3_YT3-X90L_ENG_S200028_1609230146. even its a german device this file was the only one i could find. But the LenovoDownloader won't recognize my device. The windows stays white, no entries. I guess i installed the correct driver for this device and Windows recognizes them as removable device if i plug it in via usb.
3.) I've tried to use adb and fastboot boot oem unlock. But this commands aren't working in locked state.
4.) With a trick i could open the Settings and was full of hope to active the developer options to set usb debbuging to active. But this developer options aren't available either with this "user".
5.) There is an apk for showing the "Email and password" interface. I could install it, but it force closes right after starting it.
6.) I've tried several tools to bypass this FRP: WinDroid Toolkit, D-G Unlocker, Realterm, but NOTHING.
What could i do further? I'm out of ideas right now.
I've read about a factory_update.img but i cant find anything, except the stock rom file, for this device.
Or downgrading the device, so i could use the "Email and password" but. But i can't even flash the stock rom.
Specs for the device:
Lenovo Yoga Tab 3 Pro YT3-X90L
Lenovo/YT3_l0_row_lte
6.0.1/MMB29M/LenovoYT3-X90L_S200307_170614
i appreciate any help i can get
greets
redplate

I've wrote it down. Hope this helps.
Situation:
"Confirm account: The device has been reset. To continue, sign in with a Google Account that was previously synced on this device. "
Explanation:
The device has been blocked by repeated input of the wrong password, pattern, etc. and can only be unlocked with the Google account of the owner.
A factory reset or hard reset does not help here, as the account information is saved in its own FRP partition and will not be deleted when the factory state is restored.
Solution:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
7. You can now not only browse the Internet through this search, but also search for and open installed programs.
8. We are looking for Chrome, open the internet browser, go to www.google.com and search for DPC test.
Link: https://www.apkmirror.com/apk/sampl...-release/test-dpc-4-0-6-android-apk-download/
9. After downloading this application, go back to the Google search application.
10. Here we enter "Download" to search for the download application.
11. In Downloads we can now find and install the downloaded app.
12. To allow the installation of this .apk, you must allow the installation of "unknown sources" in the settings.
13. Either you go here on the installation itself on "Settings", or you search for "Settings" on the Google search app.
14. After completing the installation of the DPC-Test program, start it with "Open".
15. The app itself is will register as a device owner and now allows us to set up a new Google Account as owner.
16. If this is set up, it will also be included in the FRP partition.
17. In the event of a new factory reset, the device is reset, the DPC-Test program is removed and the device can be freshly set up in the factory settings.
after the takeover of the owner, the reason for blocking the device was not present anymore and the old owner was overwritten. This will be overwritten in the FRP partition aswell with the new account and the old one no longer queried.

You, mister, are my savior! Thank you very much.

Solve works for Lenovo Yoga 3 tablet
Just a big giant thank you! My dad passed away leaving me a Lenovo Yoga 3 tablet, unable to gain access due to information stored in the FRP partition. :highfive:

Hi
I followed your instructions for first 5 points
redplate said:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
Click to expand...
Click to collapse
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance

marOOn1971 said:
Hi
I followed your instructions for first 5 points
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
Click to expand...
Click to collapse
Hi. Actually I'm not into this anymore. Could be possible they removed it since it might was reported.
If I have any idea I'll let you know it