Related
Hi,
I am trying to use the Terminal Emulator. How can I display the virtual keyboard?
press and hold the menu key.
it should pop up after a few seconds.
Also, terminal emulator does not support numbers. I suggest you purchase Better Terminal Pro from the market or set up adb.
Thanks a lot
There is also a free terminal emulator in marketplace called 'android terminal emulator' that also supports numbers.
BoomBoomPOW said:
Also, terminal emulator does not support numbers.
Click to expand...
Click to collapse
mine does.
it came with enomther's theofficial rom.
looktall said:
press and hold the menu key.
it should pop up after a few seconds.
Click to expand...
Click to collapse
I have same problem,,, I'm using better terminal emulator pro, I tap the screen and virtual keyboard didn't show up, it's only show character ] and > .
can anybody help?
AssDroid said:
I have same problem,,, I'm using better terminal emulator pro, I tap the screen and virtual keyboard didn't show up, it's only show character ] and > .
can anybody help?
Click to expand...
Click to collapse
you need to use the org ime "android keyboard".
With every other android phone i had i could force the phone to use 3G only by going to *#*#4636#*# and selecting "WCDMA Only".
I can do the same on the SGS but it does not do anything. it has no effect on the phone.
Anyone has any idea how to do this on the SGS?
Yes..I am looking for the same information..Without this feature..i am screwed.the phone keep going to 2G as long as the signal strength is stronger than 3G..this priority scheme logic suck big time for data centric phone which data speed is more important..
DownlOad anycut, run it,NEW SHORTCUT - ACTIVITY - PHONE INFO
A short cut will now be on your homescreen with all the required options.
*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.
clubtech said:
*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.
Click to expand...
Click to collapse
You don't need to type all that *#*#.........#*#* on your I9000, just hold the menu button down(which is the button in the middle of the bottom of the phone) and you will see an icon called service mode and this is the mode after you type all that out.
kevin307 said:
You don't need to type all that *#*#.........#*#* on your I9000, just hold the menu button down(which is the button in the middle of the bottom of the phone) and you will see an icon called service mode and this is the mode after you type all that out.
Click to expand...
Click to collapse
That's only if you've typed all that stuff already in the current session.
The Network app (by Philipp Mangelow) is a bit easier to handle though.
need to say sorry first... i've just found out this as well.
my bad.
first, I am korean. so I am terrible in English.
I have tried various methods to solve wifi freeze on screen turn off.
but any method did not succeed.
but I found that the problem does not occur when streak connect with power cable.
so I have tried to produce similar effects when streak does not connect with power cable.
I use tasker and secure settings for this. (rooting is required.)
and I finally solved the problem.
follow this step.
1. you have to install tasker and secure settings apps.
2. run secure settings and click "Helper is not installed" to install helper.
3. run tasker and click + button on the bottom to create new profile.
4. choose first context > State > Power > Power(Source : any, Invert : check)
5. click New Task > name : any text or blank > click + button to create action.
6. choose Plugin > Secure Settings > Edit > choose Wake Device
7. select Wake Type : CPU Awake Only, select Duration : Manual On
8. click menu button and save.
9. close create task window.
10. long press the first context to create second context.
11. click Add > State > Net > Wifi connected.
12. long press the task to create exit task.
13. click Add Exit Task, and follw the same from 5~9 but select Duration : Manual Off.
now, your streak is solved the wifi problem.
enjoy the streak.
How does this affect your battery life, since it sounds like it keeps the device from going to sleep.
Sent from my Dell Streak using xda premium
I don't have the wifi problem, but your english is great!
Nice first post!!!
kraz
The battery is a little bit down quickly.
However, is difficult to feel.
krazman325 said:
I don't have the wifi problem, but your english is great!
Nice first post!!!
kraz
Click to expand...
Click to collapse
thanks krazman325.
but i am not comfotable with english. ^^
Hello all
here is some info that I collected from multiple other places to help with the low volume problem in my Samsung Focus:
Increase Speaker Volume
1- Go to the dialer of your phone and access diagnostic mode by dialing ##634# or start the Diagnosis app by clicking it from your app menu.
2- Input *#0002*28345# to get to the Audio menu.
3- See the last option named “Device Gain (max/min)”... Hit the “Get” option next to it.
4- Now from among the 3 fields: in the second one enter 16000 and in the third field enter 0.
6- Hit “Set”.
7- Tap “Start” button at the bottom of the app.
8- Exit Diagnosis by clicking the windows home button then restart your phone.
Increase Headphone Volume
1- First and foremost make sure that your headphones are attached to your phone, as the fix won’t work otherwise.
2- Go to the dialer of your phone and access diagnostic mode by dialing ##634# or start the Diagnosis app by clicking it from your app menu.
3- Input *#0002*28345# in the diagnosis screen.
4- Navigate to “Device Gain (max/min)” and hit the Get button next to it.
5- In the 3 fields, enter these values respectively 5, 1100 and –1100
6- Hit "Set".
7- on the next line below change the AUDIENCE.CFG to "on".
7- Tap on the "Start" button at the bottom of the app.
8- Exit Diagnosis by clicking the windows home button then restart your phone.
NOTE:
Speaker volume may become so loud and it may crackle at really high volumes, so I use the hardware volume buttons to stay slightly below the maximum volume
You can try using the Diagnosis app to restore the default values below, but it may not help & only a hard-reset will apply these default original volumes:
Default Volume Settings (Speaker)
Device Gain (max/min): 7 / 1200 / -500
Default Volume Settings (Headphones)
Device Gain (max/min): 5 / 400 / -1100
If you do not have the Diagnosis app (or can not enter the Diagnosis mode), you can sideload the attached .xap
Hope this helps
There is a very similar thread a while ago, and I think most of this info is already on the Samsung Focus wiki.
EnderPsp said:
There is a very similar thread a while ago, and I think most of this info is already on the Samsung Focus wiki.
Click to expand...
Click to collapse
like i mentioned: collected from many places..so its complete info
here i added the back speaker tweak too
and added a missing step in headphone tweak that fix the settings not sticking
also alerted users about possibility of "too high" volume & how to fix + attached the diagnosis app
so, someone can put all this on wiki...& delete this thread if you want
its just when i was using the wiki info alone it was not really helping & had to search additional sites
ahmedfikry said:
like i mentioned: collected from many places..so its complete info
here i added the back speaker tweak too
and added a missing step in headphone tweak that fix the settings not sticking
also alerted users about possibility of "too high" volume & how to fix + attached the diagnosis app
so, someone can put all this on wiki...& delete this thread if you want
its just when i was using the wiki info alone it was not really helping & had to search additional sites
Click to expand...
Click to collapse
I didn't say it's bad stuff, it is useful. You should be able to edit and put it on the wiki, I think.
EnderPsp said:
I didn't say it's bad stuff, it is useful. You should be able to edit and put it on the wiki, I think.
Click to expand...
Click to collapse
Done..added to wiki
Samsung Omnia I8350 - Unable to access Audio control utility
ahmedfikry said:
Done..added to wiki
Click to expand...
Click to collapse
I recently purchased Samsung Omnia I8350. During initialization software got upgraded to 7.5
I wanted to increase the sound volume for headset and speaker using Audio controller utility as mentioned above but the menu doesn't come up. I am able to access Diagnosis application but unable to open Audio control utility using *#0002*28345# or *#0002*28346#. Nothing happens when I type this.
Can you provide me the solution?
amyash said:
I recently purchased Samsung Omnia I8350. During initialization software got upgraded to 7.5
I wanted to increase the sound volume for headset and speaker using Audio controller utility as mentioned above but the menu doesn't come up. I am able to access Diagnosis application but unable to open Audio control utility using *#0002*28345# or *#0002*28346#. Nothing happens when I type this.
Can you provide me the solution?
Click to expand...
Click to collapse
What Diagnosis version do you have? if it's not v0628 then delete it and re-install by typing ##634#
EnderPsp said:
What Diagnosis version do you have? if it's not v0628 then delete it and re-install by typing ##634#
Click to expand...
Click to collapse
Version 1109. How do I reinstall the v0628?
amyash said:
Version 1109. How do I reinstall the v0628?
Click to expand...
Click to collapse
Sadly, I believe you have the "latest" Diagnosis delivered through "Samsung Update" (past KK2), which stops interop unlock.
Can you please run Diagnosis, and run *#1234# and check/post your PDA (1st entry)?
The "Samsung update" info is in this post. You will have to restore (in Zune) in order to use the old Diagnosis and update manually.
So I've noticed that the Verizon model is missing a couple of options, anyone find any others?
Ability to change Font styles, it's missing
Battery saver mode is missing
It seems like they've messed with the Quick Settings bar
The first two on your list are not missing. I changed my fonts already, and there is a battery saver mode.
Fonts: settings> personalize> change theme> menu button on top left, scroll down to Fonts and pick the one you want, then apply it (you can change icons, sounds, wallpapers, etc in here too)
Battery Saver is called Extreme Saver and is in the Quick Settings bar.
Customizing the Quick Settings is not available, as HTC has disabled our access to the System UI Tuner.
Thanks man, I swear I did look for those, but this just goes to show that I'm not very smart. LOL
Is there a way to use a font that I purchased? I can't seem to find how to select it.
mahercs said:
The first two on your list are not missing. I changed my fonts already, and there is a battery saver mode.
Fonts: settings> personalize> change theme> menu button on top left, scroll down to Fonts and pick the one you want, then apply it (you can change icons, sounds, wallpapers, etc in here too)
Battery Saver is called Extreme Saver and is in the Quick Settings bar.
Customizing the Quick Settings is not available, as HTC has disabled our access to the System UI Tuner.
Click to expand...
Click to collapse
Thanks for the info, I looked at the Extreme power mode and that's not the same as the normal Battery Saver. It doesn't appear like you can add fonts that you purchased.
Yeah, I don't use the battery saver mode, so I don't know the difference between them. If you got the font from the HTC theme store, I would think you could apply it the same way as free ones. If you bought it from the Play store, I don't know how to apply that.
I figured out how to add purchased fonts, Settings/personalize/edit current theme/scroll down & select "font" , click the v arrow, next to fonts in the top left. Select "others", & if you've already purchased fonts then they should show up.
Same "Power Saver" issue here
Dragbike Racer said:
Thanks for the info, I looked at the Extreme power mode and that's not the same as the normal Battery Saver. It doesn't appear like you can add fonts that you purchased.
Click to expand...
Click to collapse
I am having the same issue on my Verizon HTC 10. There is an "Extreme Power Saver" mode, but no regular "Power Saver" mode - Why is this not on Verizon's HTC 10? The "Extreme Power Saver" is not what I ever want to use as it makes the phone pretty much useless. Why would a feature like "Power Saver" mode be removed?
There is no "PowerSaver" mode on stock Verizon handsets. The carrier claims that it interferes with the 911 requirements. Rooted Verizon handsets can reactivate the option through mods (I believe it's a SQLlite edit of a database; that's how it was on the M9). I had PowerSaver always running on my M9 once it was rooted.
For the powersaver mode, try this from a computer with working ADB
Code:
adb shell "settings list secure | grep power"
If it returns something that looks like this
Code:
hide_ui_user_powersaver=1
Then try
Code:
adb shell "settings put secure hide_ui_user_powersaver 0"
This does not require root if done from a computer. It will require root if done from a terminal on the device. This is what works on an M9 running Marshmallow. It may or may not work on the 10. You can also try
Code:
adb shell "settings list secure"
To get a list of all the settings.
l7777 said:
For the powersaver mode, try this from a computer with working ADB
Code:
adb shell "settings list secure | grep power"
If it returns something that looks like this
Code:
hide_ui_user_powersaver=1
Then try
Code:
adb shell "settings put secure hide_ui_user_powersaver 0"
This does not require root if done from a computer. It will require root if done from a terminal on the device. This is what works on an M9 running Marshmallow. It may or may not work on the 10. You can also try
Code:
adb shell "settings list secure"
To get a list of all the settings.
Click to expand...
Click to collapse
I'll look into this when I get home, thanks!!
l7777 said:
For the powersaver mode, try this from a computer with working ADB
Code:
adb shell "settings list secure | grep power"
If it returns something that looks like this
Code:
hide_ui_user_powersaver=1
Then try
Code:
adb shell "settings put secure hide_ui_user_powersaver 0"
This does not require root if done from a computer. It will require root if done from a terminal on the device. This is what works on an M9 running Marshmallow. It may or may not work on the 10. You can also try
Code:
adb shell "settings list secure"
To get a list of all the settings.
Click to expand...
Click to collapse
I can confirm this works. Just did it on my VZW 10 and good ol' regular Power Saver mode is now present under Settings > Power.
thedrizzle said:
I can confirm this works. Just did it on my VZW 10 and good ol' regular Power Saver mode is now present under Settings > Power.
Click to expand...
Click to collapse
I can also confirm that this works. Performed the instructions above and then rebooted my phone and I now have both Power Saver and Extreme Power Saving Mode!
Thank you!
l7777 said:
For the powersaver mode, try this from a computer with working ADB
Code:
adb shell "settings list secure | grep power"
If it returns something that looks like this
Code:
hide_ui_user_powersaver=1
Then try
Code:
adb shell "settings put secure hide_ui_user_powersaver 0"
This does not require root if done from a computer. It will require root if done from a terminal on the device. This is what works on an M9 running Marshmallow. It may or may not work on the 10. You can also try
Code:
adb shell "settings list secure"
To get a list of all the settings.
Click to expand...
Click to collapse
So I just tried this and "Power Saver" mode is now present and I can turn it on and off, but when I try to go into it to change the settings I get a fault that says "Power has stopped unexpectedly". Could there be another setting that needs changed? I'll be looking through the list to see if there is, but thought I'd ask also.
I went through the list and the setting is showing "hide_ui_user_powersaver=0" , but it won't let me change the when the Power Saver starts.
Son of a gun, works here, too. Thanks!
Can we not use an sqlite editor to get power saver back anymore?
Sent from my HTC6545LVW using Tapatalk
Evocm7 said:
Can we not use an sqlite editor to get power saver back anymore?
Click to expand...
Click to collapse
Don't think we have been able to since the m9, as I recall, it wouldn't open settings storage. But they are easy edits to default XML.
aer0zer0 said:
Don't think we have been able to since the m9, as I recall, it wouldn't open settings storage. But they are easy edits to default XML.
Click to expand...
Click to collapse
I'll look into that. Been ages since I've done any of that stuff. Thanks!
Sent from my HTC6545LVW using Tapatalk
Evocm7 said:
Can we not use an sqlite editor to get power saver back anymore?
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
So can you change the settings? Such as when it takes effect.
Thanks
Whoops, wrong person I was trying to quote