Boot loader error when installing Custom rom - Defy Q&A, Help & Troubleshooting

Hi Guys,
I own a defy +,
Here are some details
Android Version : 2.3.6
Kernel Version : 2.6.32.9-gbdd614e
Problem :
When i try i install any custom roms, i am getting boot loader err. But i was successful in installing CM7 but i am unable unable to install other custom roms.
Actually the roms gets installed but when i try to boot for the first time i always get bootloader error.

Did u Flash Kernel?
make fixed SBF From Ur Stock SBF.(moto andriod depacker-Delet CG31 And CG39)
and flash Fixed SBF With RsdLite.

Yes, it looks like sbf mismatch. See this guide for defy+. You can also try to flash a nandroid backup like this one

Thanks for your help guys, but i understand very little.
I have a nandroid backup, whenever i get bootloader error,i usually flash a Stock SBF then i will restore my phone using the nandroid backup.
Can you guys guide me how to install CM9 on my defy plus.
I flashed CM9 rom and i have also flashed CM9 kernel for gb but i am still getting bootloader error. Where i have went wrong
What is mean by SBF mismatch??

flash stock SBF.
Root
flash CM9 For DEFY+ .
DONT FLASH ANY KERNEL.

Just follow this instructions carefully. Common mistake is that you forget to wipe cache and data. So, wipe cache and data, and reboot. First boot takes longer (about 10 minutes). Good luck.

Thanks guys, i successfully installed CM9.
But , can one suggest me ROM for my defy plus, which gives good performance and also stable. ??

Related

[Q] Installing CM7 or 9 - bootloader issues

Hi,
I am trying to put CM on my Defy+... and am having issues actually installing them thru 2ndInit.
It's 'stock' rom is Gingerbread 2.3.6 and rooted using SuperOneClick.
If I install the 'stable' version of 2ndInit (0.6), in the recovery when trying to flash the rom (and indeed when trying to clear cache), it returns errors relating to /tmp/
When trying to install the ROM it says: E: can't make /tmp/update_binary
and the install fails.
So, then I try the latest version of 2ndInit (v1.something), and in recovery, it doesn't error like this anymore - it seems to install CM sucessfully, with no error reports.
However then on reboot, it shows the M logo very briefly and then goes to Bootloader screen with the error:
Bootloader
09.10
Err:A5,70,00,0023
From here I cannot access custom recovery and stock recovery doesn't help, so I have to use RSD Lite with phone connected on this 'bootloader' screen and flash a stock SPF to start again. (note, I have only found one stock SPF which will actually work this way, which again is 2.3.6, Defy+ with Blur)
I have tried this with CM7.1 Jordan, CM7.1 Defy and also CM9 Defy+.
During the CM9 installation, I installed the CM9 kernel (2.3.3).
None make any difference, always the same issue.
The bootloader error makes me think CM (7 or 9) need a different bootloader version to that one the phone from stock... but I know very little (nothing) about kernels/bootloaders...
And I have no idea why on 2ndint v0.6 the /tmp/update_binary issue happens -- i've seen a fair few people have similar problems with no (afaik) solution (other than a suggestion to try 2ndint latest version which I did and resulted in bootloader error...)
Anything else worth trying would be most appreciated!
Is there an option to (somehow) obtain a Nandroid backup of someone's working CM on a defy+ and install that from 2ndInit recovery? Would that work?
Thanks
Rob
I have the exact same problem you have. Been banging my head against this thing for 3 days without a solution...
You have to install latest 2nd init from here: http://forum.xda-developers.com/showthread.php?t=1032212.
Follow instructions (like reboot twice...). Then flash a Defy+ rom without kernel. The CM7.2 DEFY+ nightly's don't contain the kernel so you won't have a problem. You can find a link in the first post of CM7 threat.
To get everything working, you might want to check the "100% battery and ..." threat in the Dev section.
For CM9, I thing you just need to install the latest nightly on gb kernel, don't know this one. If you search a bit, you'll find everything.
Yeah,I have the same question that drived me to die~!
rjbathgate said:
Hi,
I am trying to put CM on my Defy+... and am having issues actually installing them thru 2ndInit.
It's 'stock' rom is Gingerbread 2.3.6 and rooted using SuperOneClick.
If I install the 'stable' version of 2ndInit (0.6), in the recovery when trying to flash the rom (and indeed when trying to clear cache), it returns errors relating to /tmp/
When trying to install the ROM it says: E: can't make /tmp/update_binary
and the install fails.
So, then I try the latest version of 2ndInit (v1.something), and in recovery, it doesn't error like this anymore - it seems to install CM sucessfully, with no error reports.
However then on reboot, it shows the M logo very briefly and then goes to Bootloader screen with the error:
Bootloader
09.10
Err:A5,70,00,0023
From here I cannot access custom recovery and stock recovery doesn't help, so I have to use RSD Lite with phone connected on this 'bootloader' screen and flash a stock SPF to start again. (note, I have only found one stock SPF which will actually work this way, which again is 2.3.6, Defy+ with Blur)
I have tried this with CM7.1 Jordan, CM7.1 Defy and also CM9 Defy+.
During the CM9 installation, I installed the CM9 kernel (2.3.3).
None make any difference, always the same issue.
The bootloader error makes me think CM (7 or 9) need a different bootloader version to that one the phone from stock... but I know very little (nothing) about kernels/bootloaders...
And I have no idea why on 2ndint v0.6 the /tmp/update_binary issue happens -- i've seen a fair few people have similar problems with no (afaik) solution (other than a suggestion to try 2ndint latest version which I did and resulted in bootloader error...)
Anything else worth trying would be most appreciated!
Is there an option to (somehow) obtain a Nandroid backup of someone's working CM on a defy+ and install that from 2ndInit recovery? Would that work?
Thanks
Rob
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1382284
u will have to flash stock sbf file using rsdlite.it worked for me twice
check this link for sbf file of ur build
http://forum.xda-developers.com/showthread.php?t=966537
then download version 2.0 of 2nd init and select install 1.0.7.this should work
Stuck in bootloop with every os in install
rjbathgate said:
Hi,
I am trying to put CM on my Defy+... and am having issues actually installing them thru 2ndInit.
It's 'stock' rom is Gingerbread 2.3.6 and rooted using SuperOneClick.
If I install the 'stable' version of 2ndInit (0.6), in the recovery when trying to flash the rom (and indeed when trying to clear cache), it returns errors relating to /tmp/
When trying to install the ROM it says: E: can't make /tmp/update_binary
and the install fails.
So, then I try the latest version of 2ndInit (v1.something), and in recovery, it doesn't error like this anymore - it seems to install CM sucessfully, with no error reports.
However then on reboot, it shows the M logo very briefly and then goes to Bootloader screen with the error:
Bootloader
09.10
Err:A5,70,00,0023
From here I cannot access custom recovery and stock recovery doesn't help, so I have to use RSD Lite with phone connected on this 'bootloader' screen and flash a stock SPF to start again. (note, I have only found one stock SPF which will actually work this way, which again is 2.3.6, Defy+ with Blur)
I have tried this with CM7.1 Jordan, CM7.1 Defy and also CM9 Defy+.
During the CM9 installation, I installed the CM9 kernel (2.3.3).
None make any difference, always the same issue.
The bootloader error makes me think CM (7 or 9) need a different bootloader version to that one the phone from stock... but I know very little (nothing) about kernels/bootloaders...
And I have no idea why on 2ndint v0.6 the /tmp/update_binary issue happens -- i've seen a fair few people have similar problems with no (afaik) solution (other than a suggestion to try 2ndint latest version which I did and resulted in bootloader error...)
Anything else worth trying would be most appreciated!
Is there an option to (somehow) obtain a Nandroid backup of someone's working CM on a defy+ and install that from 2ndInit recovery? Would that work?
Thanks
Rob
Click to expand...
Click to collapse
I have the same problem as you .. but in "MOTOROLA DEFY" now to break this bootloop .. i flash this particular SBF > JORDN_U3_97.21.51.rar to work again .. n following the procedure, i tried to upgrade it with os {CM7.1 or CM 9 120416, 120613 / CM10 120904, 201220912, 20924, 20130307} i ended up in Bootloop .. the recovery software i installed is 2ndinit 2.0 and stable version 0.6 .. it works without error. The procedure i use is in recovery mode: first wipe data/ factory reset > wipe cache > wipe delvik cache .. then install the zip file .. but when i restart .. i stuck in the M" Motorola" GoMgle" logo please help me to provide .. stable sbf file and OS GB rom to flash on my defy ?

[Q] Everything i trying to flash failed.

Hi.
I have a defy plus .2.3.6 rooted with 2ndinit recovery.
every ROM I've tried to flash makes the phone stuck in bootloader menu, so i had to flash SBF again.
am i do something wrong? I've flashed a lot of roms on defy mb525, and everything worked fine.
thanks and sorry for my terrible english.
Sow now you are stuck in bootloop or you can not flash a custom rom?
I just flash SBF and go back to stock rom.
try wiping data in stock recovery .
(if you access it)
No access to recovery. boot right to the bootloader.
Reply!
Firstly is your defy rooted? If yes, install 2ndint and go to recovery by switching off your phone and press volume+ and power on button.
The problem you are facing is because you are not clearing cache before flashing a custom rom. Happened to me once so i know! Follow this procedure to the line and you should be fine!
http://forum.xda-developers.com/showthread.php?t=1663613
Hmmmmm
What bootloader you have? I think... v7
Teoretically you can use any 2.3.6 ROM
Yup, V7.
The only rom I was able to install it is CM9.
I'd tried this:http://forum.xda-developers.com/showthread.php?t=1667536 with the same results.

too much confusion

hi
i have a green lens defy.
i have already little experience on flashing cyanogen mod 7 and mod 9 and mod 10.
previously i have rooted stock, installed 2ndint and flashed cm7 over the stock like this..
bootmenu>recovery>custom recovery> factory reset>install zip>wipe cache>wipe dalvik cache>reboot.
i did not take the "backup all"(what u call it as NANDROID backup, isn't it?) of stock rom....ooops.
i did the same procedure to install cm9 and cm10..but this time i took backup of cm7 during cm9 installation and cm9 during cm10 intallation.
i did this all in custom recovery only.
In the bootmenu there were other options called stock recovery and stable recovery along with custom recovery.
and within custom recovery there was motorola recovery in advanced option.. But non of them brought the stock rom back on my device.
always shows exclamation in triangle and a androbot.
So i have finally tried the RSDlite and flashed my stock sbf.
AND NOW i am again on my way to install cm10 for defy. and this time with no mistakes....Please help me to do this.
0.why are the options stock recovery and motorola recovery not working....?what are they actually..when to enter/click that recoveries??
1.How do i take backup of stock so that i can go back at anytime?
2.is backing up stock rom also done through custom recovery and backup all? if that so then why are stock recovery and stable recovery and motorola recovery options present there?
3.did i install correctly first time?
Thanks for all your answers,
prax31 said:
hi
i have a green lens defy.
i have already little experience on flashing cyanogen mod 7 and mod 9 and mod 10.
previously i have rooted stock, installed 2ndint and flashed cm7 over the stock like this..
bootmenu>recovery>custom recovery> factory reset>install zip>wipe cache>wipe dalvik cache>reboot.
i did not take the "backup all"(what u call it as NANDROID backup, isn't it?) of stock rom....ooops.
i did the same procedure to install cm9 and cm10..but this time i took backup of cm7 during cm9 installation and cm9 during cm10 intallation.
i did this all in custom recovery only.
In the bootmenu there were other options called stock recovery and stable recovery along with custom recovery.
and within custom recovery there was motorola recovery in advanced option.. But non of them brought the stock rom back on my device.
always shows exclamation in triangle and a androbot.
So i have finally tried the RSDlite and flashed my stock sbf.
AND NOW i am again on my way to install cm10 for defy. and this time with no mistakes....Please help me to do this.
0.why are the options stock recovery and motorola recovery not working....?what are they actually..when to enter/click that recoveries??
1.How do i take backup of stock so that i can go back at anytime?
2.is backing up stock rom also done through custom recovery and backup all? if that so then why are stock recovery and stable recovery and motorola recovery options present there?
3.did i install correctly first time?
Thanks for all your answers,
Click to expand...
Click to collapse
Yes, you are very confused! :silly: You know, when you install a custom rom it totally replaces your stock rom. The stock recovery is not there to recover your stock rom/restore it (where would it restore it from?? I'll have to disappoint you, but your phone is not magic!). The stock recovery can only wipe user data and install updates by Motorola onto an already existing system! You will never be able to restore your system to its original state if you don't have a backup or some idea what retail version you were on. But you'll definitely find a similar sbf over at droid developers or Walter's sbf thread.
When you see the exclamation mark with the cute green guy, you have to press vol+ and vol- together to reveal the stock recovery.
Motorola recovery = stock recovery = the recovery made by Motorola. You can acces it buy pressing vol- while powering up, through bootmenu>recovery>stock/motorola recovery or bootmenu>recovery>custom/stable recovery>advanced>motorola recovery

[Q] Help: Defy+, GB SBF, 2ndinit, bootloop after CM7 install.

Hi,
I installed this SBF using RSDLite: DEFYPLUS_U3_4.5.1-134_DFP-231_ND_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P011_A013_Service1FF.sbf.gz, (GB Nordic SBF).
Then installed Framaroot 1.4.1, rooted the phone using Gimli exploit, said root successful.
Then installed 2ndInit 2.4, said install successful.
Rebooted two times, went to custom recovery, everything seemed ok. Wiped data/cache/system using AromaWiper.
Then installed the latest fixed CM7 (cm-7-20130710-UNOFFICIAL-jordan_plus-signed.zip).
Upon reboot, the phone is stuck in bootloop. I'm still able to enter the custom recovery, so I guess 2ndinit worked, but installing the aforementioned CM7 results in bootloop.
I tried scanning through the All-in-One guide here, but couldn't really pinpoint what exactly is my problem. Could someone help, what would be the steps to take to get my phone running CM7? I'm able to flash SBF and at least seemingly flash zips via custom recovery, but I suspect there is something wrong in there since the flashed zips don't seem to work.
EDIT: If anyone can help? Is it that 2ndinit was installed badly? Reinstall from SBF, re-root, pay more attention to 2ndinit install?
In the All-in-One guide I find some problems with 2ndInit and talk about GoAPK SystemRecovery? Would that help?

[Q] Restore CWM backup on CM11

Hello guys.
I want to downgrade my defy+ from CM11 to stock android.
Before update the recovery and install CM11 i made a backup with CWM and now i want to restore this backup.
How can i do this? Can i install CWM using the kitkat on my phone?
Sorry for the dumb question, but I'm afraid of doing something wrong.
lucashs said:
Hello guys.
I want to downgrade my defy+ from CM11 to stock android.
Before update the recovery and install CM11 i made a backup with CWM and now i want to restore this backup.
How can i do this? Can i install CWM using the kitkat on my phone?
Sorry for the dumb question, but I'm afraid of doing something wrong.
Click to expand...
Click to collapse
I have discovered that I need it too because my phone is loked and, to enter my carrier unlock code, i need to restore my backup made with CWM.
Looking for the same.
Yesterday i have installed 2ndInit to get back CWM recovery and restore my original stock ROM image.
Android can not complete the full boot, showing the intro of my carrier during a hour while loading Android.
Reinstalled TWRP and recovered my CM11 backup.
I will try again and, if not suceded, i will flash my carrier SBF to unlock my phone.
I will inform any news about CWM restore stock ROM.
TicoDePano said:
Yesterday i have installed 2ndInit to get back CWM recovery and restore my original stock ROM image.
Android can not complete the full boot, showing the intro of my carrier during a hour while loading Android.
Reinstalled TWRP and recovered my CM11 backup.
I will try again and, if not suceded, i will flash my carrier SBF to unlock my phone.
I will inform any news about CWM restore stock ROM.
Click to expand...
Click to collapse
I think this happens because the roms use different file systems
Try the Aroma Wiper to change the file system:
http://forum.xda-developers.com/showthread.php?t=2202674
I'll try this, but now i'm without time, then i report if it work.
I got my phone working.
http://forum.xda-developers.com/motorola-defy/help/tim-brasil-signal-cm11-t2824983#post54683596
About revert to stock ROM, only doing a factory reset to format my data partition fix the boot (I did not try AROMA or safewipe.zip).
I do not tried to restore data from my stock dump after got my phone working because it was not my objective, but i think that it is possible and simple after get it working.
Thanks.

Categories

Resources