Database Users

Storage card flashing problem.. "No image file!"

Hello everybody,
2 days ago i flashed the dutty r5 NOR by accident, should have been NLD.
I cannot understand NOR whatsoever so i tried to re-flash my phone with the NLD version, but when i go into bootloader mode it cant find the image file. Im sitting at 90% battery charge.
What i do:
1) USB connection between phone and pc.
2) Copy + Paste the TOPAIMG.NHB in my storage card.
3) Disconnect USB between phone and pc.
4) Power off the phone (by holding the power button and press yes)
5) Press and hold volume down button and the power button
6) I see a rainbowscreen with the specs i persume from my phone
7) for 0,5 sec, i see the following:
Loading...
No image file!
8) Rainbowscreen again, and on the bottem 'serial' in the white color.
What did i do wrong? It should work..
Its very annoying to have a phone in a language you dont understand
Thanks in advance
J-r0en
Edit:
Currently i cant flash through my pc with active synch connection because my laptop is back to the factory for repair.
Cant find the Cd that came with the phone to install windows mobile device center, which is for vista+ , and this pc is xp professional. :\

2) Copy + Paste the TOPAIMG.NBH in my storage card.
Further try formatting your SD-card with FAT32. That in combination with renaming your file to the right extension, should work.

Thanks for the response.
I made a typo in the openingspost.
The image file on the storagecard is TOPAIMG.NBH.
I flashed the current ROM via the storagecard so it should
be fat32. I'll try to reformat the storagecard and see what happens.
*thumbs up*

It didnt work, any other ideas ?
my original rom was in another language, maybe that aint allowed? to flash a new rom in a different language.

True, unless you have HSPL this won't work.

Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work

J-r0en said:
Yes i am aware of that. I already have HSPL installed on my phone, as i've done phone flashing on via my storage card before.
I re-installed HSPL, just to try , but it still doesnt work
Click to expand...
Click to collapse
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...

BumAround said:
TOPAIMG.NBH
No typo? All capitals? Sorry, just making sure...
Click to expand...
Click to collapse
Nope, no typo's, "TOPAIMG.NBH" just like that =p

Have you tried TOPAIMG.nbh (lower case .nbh)?

I had the same issue flashing the original 6.5 OEM flash and Dutty's.
I have a 16GB card. I think that may be the issue. Perhaps 8GB or less will be recognised.
Anyway. All I did was use the wrapper method.
I booted to HardSPL and then connected it to the PC, ran the wrapper file included with the firmware and went through the modified firmware wizard on the PC and all sorted
- Geoff

In case anyone else comes across this thread while having this problem...
I had the same problem with my Rhodium. The problem disappeared when I switched from formatting that particular SD card with FAT to FAT32.
So, try FAT32 and see if that helps!

Finally!!!! took me forever to fix this. So my problem was the same, after flashing a custom ROM thru RUU, I got stuck in the splashing screen and kept getting "No image file" in HardSPL. So my solution was "SWITCH my FAT32 8GB microSD with a FAT32 4GB microSD". That's all! hope this will help someone else too.
Happy New Year!!!

Well i didnt fix it, still didnt flashed the rom that i wanted (in dutch) but i went back to WWE, that díd work.. eventually

Can i flash radio rom from SD card?

I have managed to get HSPL on to my HD2 without issue (by borrowing a mates laptop), sadly i didnt have internet access at the time and didnt download the customruu loader i needed for my radio rom update.
The question i am left with is can i update the radio rom (only as i dont want to loose my data ala hard reset) from just the sd card?
Thanks

Hi,
you need HardSPL or Goldcard to flash LEOIMG.nhb (renamed from RUU_signed.nbh) from SD Card.
with friendly greet
starbase64

Ive got Hardspl on the phone so im guessing a LEOIMG.nhb renamed RUU_signed radio rom would only flash the radio section?
I am fairly happy with the process, but i am just trying to confirm that ONLY the radio section would be flashed in this case and the rest of my phone setup would be safe!?

it still needs to be leoimg.nbh to work from sd card, no other file name will be recognized apart from that it should work fine from sd card

Copy LEOIMG.nhb to root of SD card. Turn phone off, hold sound lower button and turn phone on...

Just so im clear, is it case sensitive?
And i thought it was;
LEOIMG.NHB
is that the right extension or is it .nbh?

nbh and not case sensitive.

No, it doesnt case sensitive... LEOIMG.nhb or leoimg.nbh... It is indifferently

Strange i have renamed the RUU_signed file for the radio rom, reset and yet the HSPL installer doesnt come up. Im going to try another download, and if that doesnt work il format up a spare sd card and try it with nothing else on.
Re-downloaded the rom and it seems fine this time.
Here it goes, new radio rom!
Thanks for the help!

"the hspl installer"? what's that? do you mean the boot loader? you must activate that yourself.
phone off
hold volume down
tap power and release (keep holding vol)

Thanks all sorted, here comes 2.07.50.27!

This is to samsamuel
You have this in your "signature": PM me for hd2 goldcard
I need a goldcard very badly, can you help me?
Regards
Peter

i did everything on here and when the tricolor screen comes up nothing happens...what could it be?...changed the name of the nbh file and put it on root of card...reboot with vol down and tri color screens comes up and nothing happens....tried it with both radio roms and stock winmobile rom.....wut do you guys think?

trinfinate said:
.wut do you guys think?
Click to expand...
Click to collapse
i think you have an 8gb or bigger sd card?

Yes I have a class 6 16gb card..does it have 2 be less than that 2 work ?
Sent from my DL DesireZ v4.1 using XDA App

well, there are exceptions, but in general 16gb and 8gb mostly dont work,(mostly, flamers, no need to fill the thread with 'mine works,, so does mine,,, mine too,,how about yours?, , ', hehe) some 4gb work, 2gb or less great.

i just bout a sandisk 2gb card to flash with,....i put radio rom in the card....renamed it to leoimg.nbh.....reboot phone with vol down pressd....tricolor comes up..but still..nothing happens?....am i missing something here?

So it still doesn't work with a 2gb card....any other ideas?....thank u guys..
Sent from my DL DesireZ v4.1 using XDA App

2gb sandisk cards usually ship formatted to FAT you have to reformat it to FAT32 else bootloader wont see it. Full format, not quick format.

Format it to fat32....and hspl detected it perfectlie...now I'm running radio Rom 2.15.50.14.....alreadie noticed fewer dropped data.....thank u guys and thank u Samsamuel..
Sent from my DL DesireZ v4.1 using XDA App

Cannot flash from sd card but can flash from USB

Hi i have flashed my HD2 from a sd card for more than 30 times but now I am unable to flash using my sd card.
I get into the boot loader mode with leoimg.nbh on sd card, but in the bootloader mode white colored loading screen appears for some fractions of a second and returns to tri color screen.
I was using Ozrom on the device last when i discovered this problem.
spl - 1.42.hspl
cotullahspl
Please help...
Sorry for my bad english.
Also I had already done alot of searching but could not find anything...
Update :
Now i cant flash from usb also. First I was able to flash from usb but now I cannot.
-Tried using a new sd card and formatted with fat32 file system. Problem still exists...
-Checked the file name and extensions its not "leoimg.nbh.nbh".
-Tried flashing just leoimg.nbh on card
-tried flashing with 5 different roms from different cooks
-tried renaming the file to capitals LEOIMG.nbh
-updated the hspl to hspl2 2.08
Problem is not solved.

There may be a problem with the sd card. Are you still using the same card you have used before? If so, try formatting the card (FAT32) or try a different sd card if you have one.
You can of course continue using usb, sd card flashing is only really needed in order to remove hspl.

Maybe is your card corrupted, try to format it in FAT32...

Tried using a new sd card and formatted with fat32 file system. Problem still exists...

Mate, you only need to flash from sd card when you cant flash from usb. I dont know why you are getting this error but dont worry too much. Did you name the file correctly (leoimg)? It's easy to make a mistake here. Some people rename the file to leoimg.nbh - you dont need to add the .nbh. It's already an nbh file - so you would end up with leoimg.nbh.nbh
Lastly dont flash a 2.10 rom via sd card or you will end up stuck with an spl that you cant change

i know about the file extensions and file names...i am flashing since 3 years from memory card....i am not a newbie..tell solutions other than the problems occured to noobs...like rename error..format memory card stuff...i want some solution other than that..
thanx alot for your support its really appreciated...looking forward for your help..hope now this time you can divert me in the right direction
also i have work of travelling so i have to flash my phone sometimes on the go
Regards

ankush1492 said:
also i have work of travelling so i have to flash my phone sometimes on the go
Click to expand...
Click to collapse
sorry but thats lol... shouldnt u be using phone on bussiness trip instead of messing with it?

i did not said that i have business trips..i travel a lot..so getting bored i start messing with it...LOL

can anyone help me in this???

Same problem
Guys, indicating same problem - SD reformated, still same situation. Tried also re-flash shipped ROM etc., but nothing helped. Doesn't work also on original SD (2 gigs).

does your "loading" screen in your bootloader comes and goes very fast???

ankush1492 said:
does your "loading" screen in your bootloader comes and goes very fast???
Click to expand...
Click to collapse
Try capital letters LEOIMG.nbh etc etc

try install 2.08.hspl, that also happened to me. fixed when i install 2.08.hspl from HSPL2.

tried capital letters LEOIMG.nbh also installed 2.08 hspl2. problem is not solved....

I have this problem as well.... I have hslp2 2.08 I TRY'de IT WITH 3 DIFF SD CARDS 4GB 8GB 16GB fat 32 AND NOTHING!!!!!!! ANYONE knows how to fix this????!?? I have NEVER been able to flash from sd I have a tmo usa hd2 maybe using task29 could fix it but it doesNT!!!
aby help PLEASE

Please xda. This problem may arise and annoy many users. so please help so that we can find some solution..

problem still exists can anyone help?

I always used to flash my diamond from internal storage when i had it. Got my HD2 and carried on flashing from SD for my first 2 or 3 ROMs and then it stopped working having the same thing as you. As if it tries to read the .nbh then goes back to the bootloader. I havent let it worry me as im nearly always next to a pc when im flashing a new ROM (have to be now), but I would be interested to find the answer as well.

but no one is really interested to reply here peovide a solution.....infact they are advising to flash from a pc...but i want to flash from a sd card

Just keep using USB, less lilkely to go wrong anyway

[Q] Problem installing cLK1.5 with broken usb

Hey,
My USB ir broken a long time ago and I was already lost the hope of changing my rom when I saw cLK 1,5. But unfortunately I am not able to be succesfull installing it.
I did everything right(atleast I think I did it right)
1)Formatted SD Card
2) Moved LEOIMG to the root of sd card
3) Turn on the hlsp
And then when I get to hlsp nothing really happens, just tri-collored HSLP screen(or I don't know what to do or press).
Could anyone help me, what I have missed?

Do you have HSPL 2.08 installed? Is your SD formated to one (Fat32) partition? And are you sure it is leoimg.nbg, and nod leoimg.zip?

Wolf741 said:
Hey,
My USB ir broken a long time ago and I was already lost the hope of changing my rom when I saw cLK 1,5. But unfortunately I am not able to be succesfull installing it.
I did everything right(atleast I think I did it right)
1)Formatted SD Card
2) Moved LEOIMG to the root of sd card
3) Turn on the hlsp
And then when I get to hlsp nothing really happens, just tri-collored HSLP screen(or I don't know what to do or press).
Could anyone help me, what I have missed?
Click to expand...
Click to collapse
After many unsuccessfull try like you, I bought today a 2GB new sdcard, format it fat32, put the file in it and it worked !
It is already mentioned in other threads that large sdcard would not allow the installation of clk1.5 .

abrise said:
After many unsuccessfull try like you, I bought today a 2GB new sdcard, format it fat32, put the file in it and it worked !
It is already mentioned in other threads that large sdcard would not allow the installation of clk1.5 .
Click to expand...
Click to collapse
It works with my 4gb SDHC and 16gb SDHC both class 4
Sent from my HTC HD2 using Tapatalk

[Q] Unable to reflash to stock ROM

Hi guys,
So recently my screen stopped working and I need to get it fixed. I want to revert the phone back to its stock ROM but I can't seem to do that. I downloaded the stock rom and followed this guide: http://www.youtube.com/watch?v=Wc89Gh0QpIY&feature=player_embedded
But, when I get into bootloader, in the white section of the screen it says Serial and it just stays unresponsive, it doesn't boot up like in the video. Any ideas on what's going on?

Did you rename the .nbh file to LEOIM.nbh? Also did you put thenfilenon the root(not in a folder) of your SD card? If you have done both of these then make a back up of you SD card and then reformat you SD card with a full format and not a quick format. Also the SD card method does not work well with larger SD cards so you may have to try a 2gig or 4gig SD card. Last you can use HSPL 4 to revert back to stock SPL just choose the SPL version from the drop down box when you run the installer, here is a hint the SPL's with four zeros at the end are stock SPL's.

Thanks for the reply
So, I tried reformating my 16 gb SD and still have the same problem. I then tried to do it with a 4 GB SD, same thing. So I tried it with HSPL but I can't sync the phone to my PC since it's in storage mode and with the touchscreen broken I can't adjust it to sync. I'm not taking the phone to a verified dealer so they probably won't care that it's flashed. The problem, from what I understand is that the digitizer is broken, so it shouldn't matter that the phone is flashed, right?
Thanks

You can connect it to the PC for flashing without Windows Mobile through the bootloader (3-colour screen). Just turn that on and connect it; Serial should change into USB and you are ready to flash.
About SD card method: Make sure the nbh file is named LEOIMG.nbh. The letters MUST be uppercase, else it might not work.

Spaqin said:
You can connect it to the PC for flashing without Windows Mobile through the bootloader (3-colour screen). Just turn that on and connect it; Serial should change into USB and you are ready to flash.
About SD card method: Make sure the nbh file is named LEOIMG.nbh. The letters MUST be uppercase, else it might not work.
Click to expand...
Click to collapse
Thanks a lot, that worked.