Database Users

[Q] Ext3 on SD card.

Okay, I use MDJ's CM7 2.4 build and I saw that to increase my internal memory for more apps I need to install Ext3/4 on my SD card. I think I did that successfully because it seemse that the apps don't use up much internal memory anymore and my SD card shows that it has 7 gigs of free space (I have a 8 gig card) so I presume the other 1gig is ext3. The problem is I cannot explore this partition. I searched but found nothing that could help me. Also if I decide to delete this partition what do I do? I tried formatting my card but it still shows 7 gigs. Thanks for all who decide to help me .

[Q] Creating bootable SD card size issue

Hi all,
It seems that I'm having a bit trouble with writing the image to my SD card. I'm using a 16GB currently with Honeycomb on it, but after the image finished writing, my card size is reduced to 105MB free out of 150MBish. I tried to get the CM7 boot to work on a 2GB card, after the "generic" img finished writing on the card, it gets the same free 105MB, and I can't copy the CM7 files onto the card because those files are 115MB total.
I tried partitioning the card but it's still the same, and the computer isn't able to see the second partition that's not the main one. Is anyone having this issue and/or know how I can fix it? Much appreciated.
Cheers,

kzn said:
Hi all,
It seems that I'm having a bit trouble with writing the image to my SD card. I'm using a 16GB currently with Honeycomb on it, but after the image finished writing, my card size is reduced to 105MB free out of 150MBish. I tried to get the CM7 boot to work on a 2GB card, after the "generic" img finished writing on the card, it gets the same free 105MB, and I can't copy the CM7 files onto the card because those files are 115MB total.
I tried partitioning the card but it's still the same, and the computer isn't able to see the second partition that's not the main one. Is anyone having this issue and/or know how I can fix it? Much appreciated.
Cheers,
Click to expand...
Click to collapse
Very much a known issue... to work around this:
1. Write the image to SD
2. Resize boot partition (only one on it so far) to anything up to 2 GB.. I recommend keeping it less than 2 GB for compatability
3. Put your ROM on the boot partition
4. Put SD in nook and boot it up

Hey thanks!
So for some reason I was able to follow this post and root my Nook http://www.informationweek.com/byte/howto/231002060
I used the 2GB card again and this time after writing the image to it I still have 1.75ishGB left and the file didn't take up the whole card like it did previously. Was able to boot up CWM and flash CM7.
But I'm running into another problem, which is my 16GB card, no matter how I format it, the Nook would not recognize that it's mounted. And when it does show up in the system, it only sees about 1.5GB, and the card is completely empty. I'm really stuck here, is this another known problem?

But I'm running into another problem, which is my 16GB card, no matter how I format it, the Nook would not recognize that it's mounted. And when it does show up in the system, it only sees about 1.5GB, and the card is completely empty. I'm really stuck here, is this another known problem?
Click to expand...
Click to collapse
What are you using to format it? What format, FAT32? What was on it before? What shows up when in a reader on your PC?

I used EASEUS and also just window to format the card. It's in FAT32 and my PC sees it as a removable storage device just fine, all 14.5GB of it.

LOL
Honestly, the OP does drive me nut
I want to help but I can't follow what he said.
16GB SD, 2GB SD, what?
If you, OP, still need help, then pls clearly indicate what your problem is and what you intend to accomplish.

kzn said:
I used EASEUS and also just window to format the card. It's in FAT32 and my PC sees it as a removable storage device just fine, all 14.5GB of it.
Click to expand...
Click to collapse
EASEUS does help a lot (ext4) but I would then suggest never using Windows to format a uSD. This works much better IMO to get a good format.

partitioned sd card? maybe?

I was going to upgrade my rom to the new flexreaper rom and i figured i would partiton my sd card... but when i did it seemed to happen a little bit quickly.. so i checked my sd card and all my data was still there (therefore it did not wipe it) which makes me think it was not partitioned.
Also when i hit partition sd card - i picked 1024 for ext size (i have a 16 gb sd) and 0 swap - then partitioning sd card and done appeared almost at the same time which puzzled me...
can anyone tell me if it is actually partitioned or not or is it even worth it to partition a sd card on a tablet?
Thanks.

[Q] Use the SD card for storage "Android SD"

Hi,
I wonder if someone can help me, I've got WP7.5 install as a NAND installation, with Android 4.0.4 as a SD installation. Both work brilliantly, although I do have some slight problems.
Android won't detect an SD card installed, so I can't use some apps, that require an SD card to be present.
Does anyone know if there is a fix for this, surely I'm not the only person in this position.
Cheers

I'm guessing it's because your SD has been formatted specially by WP, and Android can't read this. Your FAT32 partition is probably too small for anything to be stored in it.

The Fat32 partition is 1.6Gb.
Is it worth making that bigger, or creating another FAT32 partition?
Cheers

Hmm, I'd guess that you wouldn't have any more than 200-300MB free on your SD as read by SD Android then. I don't know how much an SD Android build takes up but the data.img is at least 1GB of that. As for increasing the partiton/creating a new one, I don't actually think that's possible without losing your data is it?

Hi,
Thanks for your help.
I'm not too fussed about losing anything...
Here is what I have just tried without any success.
I have a 8Gb card partitioned like this.
1.*Gb
Primary, FAT32, (Android SD install)
2Gb
Primary, FAT32, (My hope would be that Android would see this as the SD card)
4Gb Other (WP 7 partition)
No luck unfortunately, any ideas?
Cheers

Are you sure you're using an 'unlockable' WP7.x ROM? If so, try formatting the storage card to normal and flash a Android build, see if it utilises the memory card like normal, if it does, then I would say that you're doing something wrong when setting it up.
Just double check each step of a tutorial (example: this one) twice and hopefully you'll only have to flash one more time.

Why do you have 2 fat 32 partitions ?...just use one fat 32 partition..in regular sd android....data image is used as internal memory and fat 32 part as sd card
I believe your second partition is not being recognised...make only one fat 32 partition you don't need two
Sent from my HTC HD2 using Tapatalk 2

Micro SD card wont be mounted by Samsung Tab a6

So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.

I'd try a different sdcard.

Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.

zenful said:
Okay, so I hope I can help, I have the SM-T280, I do not use Tinker ROM, instead I debloated my stock ROM and use an SPA kernel by @_mone. If you're trying to extend storage to your tablet, you'll need to use a PC to partition the SD card two PRIMARY partitions. I used on Windows MiniTool Partition Wizard (free), and I used a FAT32 partition and an ext2 partition. With the stock ROM/kernel I had problems using ext4 or extFAT which didn't make sense to me but it is what it is, and I used the app Apps2SD to handle all the work.
The main thing, you need to make sure your SD card has TWO (2) PRIMARY partitions.
Good luck.
Click to expand...
Click to collapse
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?

Panslothda said:
What about the Sizes? As in one partition 60 GB the other one also 60 GB ? Or the fat32 partition 1 GB and the ext2 the rest?
Click to expand...
Click to collapse
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.

ashyx said:
FAT32 is not for large capacity storage. Use exFat. There isn't much point in having such a large ext2 partition. It's incompatible with media transfer protocols unless you use a Linux system.
This device fully supports exFAT. I use a 64gb sdcard no issues.
Click to expand...
Click to collapse
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?

Panslothda said:
Well my current one is exfat formatted. works perfectly fine on PC only thing is its 128 GB.... I mean is that maybe the issue? that its to large?
Click to expand...
Click to collapse
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.

ashyx said:
I wouldn't think so, I'm sure it supports 128gb cards.
Just partition it into to halves. First partition exfat. Leave the other unformatted and see what happens.
Click to expand...
Click to collapse
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?

Panslothda said:
partitioned into a 40 GB exFAT partition and left rest unpartitioned. Didn't change anything. if I pop it in the tablet I get a short preparing sd card notification then immediately an SD card safe to remove notification...
I'm really confused by this. The tablet is new so I doubt that it's broken but I don't know. Do you know if there's a way to check any kind of logs on Android like dmesg on Linux as an example to see what happens with the sd card?
Click to expand...
Click to collapse
It's best just try out another card to rule out the card.

ashyx said:
It's best just try out another card to rule out the card.
Click to expand...
Click to collapse
Welp gotta buy one first then :/

Panslothda said:
Welp gotta buy one first then :/
Click to expand...
Click to collapse
Nobody can lend one for a few minutes? Or try the card in someone else device?

Panslothda said:
So I have a Samsung Tab a6 7 T280 wifi and I've inserted a MicroSD card (128GB). I've done this with the stock os first and I just got the message card can be removed safely. and it wouldn't let me mount it.
Now I've installed the Tinker V5.1 Stock Rom over it and it still happens. (wanted a faster os on it).
I can reformat the card with twrp to be ext4 or exFAT and it doesn't change a single thing. if I insert the sd card I get a quick preparing card and then instantly the message card can be safely removed. clicking on mount sd card in storage from settings doesn't do anything except prompt same message.
Click to expand...
Click to collapse
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.

lewmur said:
According to Samsung, the T280 will support a 256gb SD card BUT I know from experience that SD cards over 32gb can be VERY touchy. If you use a PC to remove all of the partition and then let the tablet try to do its own formatting and it still doesn't work, I'd say you have an incompatible SD card. That doesn't mean the card is bad but that it just won't work in the T280.
As an example, a Samsung EVO+ card (which can be found on eBay for $30) will probably work while a "no name" card from China, probably won't.
Click to expand...
Click to collapse
I always use Samsung EVO cards and they always work perfectly. Price per GB they are very reasonable too.

Scandisk ultra i find ok no matter what size
Sent from my SM-T585 using XDA-Developers Legacy app