Hi, I am really confused
the status / notification bar is not available after update - and if I press notifications, then nothing happens.
Has sombody an idea how to solve it ?
I used the "GRI40_rooted_deodexed_busybox_apps2sd.zip" file.. it went fine..
Thanks
Did you do a full wipe? Required if coming from a different ROM
no, I came from the CyanogenMod 6, so I need to do a complete wipe ? Is there a new ROM with CyanogenMod or its to late and I need to wipe it ? An how ? Thanks !
Boot into recovery and do a full wipe.
Even if you're going up to CM7 RC1 or nightlies you need to do a full wipe.
thanks, it was working well
3rd thread, about 4th rom flashed
constant issues with builds. have gone from stock to:
cm 6.1.3 -apps crashing, random crash notices i.e "phone book has crashed force close" - "the process com.android.phone has stopped unexpectedly"
cm 7 - random reboots, opening browser caused power cycle, wifi issues, lag (thread posted, no solutions at the forefront)
currently on tripnraver pre release. now another issue. no signal what so ever.
original baseband on this xperia x10a is .55. it is suggested to use with bands 52 or 49.
loading either of these basebands. which ive done. doesn't seem to fix the no signal problem. the description states should be backwards compatible even if appropriate bb is not installed on device. yet no luck.
attempting to flash either baseband fails to resolve this problem. currently trying to flash back to stock and try another full reinstall and baseband flash in flashtool.
any ideas would be a great help. having to flash x number of times between roms is getting quite time consuming
thanks everyone.
if you want to stay on the miui rom, you can flash the baseband patch located here and stay on whatever baseband works best for you (I'm on .55 and find it fantastic), then when you load the rom, go to dev tools>bad behaviour>crash the system server.
http://forum.xda-developers.com/showthread.php?t=1011608
Otherwise, I would recommend wolfbreaks cm 6.1.3, as it is the most stable. You must have done something wrong during installation as I never had an issue with his roms.
The only issue I have ever had with any rom is MiUi and thats because I used the wrong baseband. You must be doing something wrong for you to be having problems
if you want, try this flash, it's trips miui pre-final with the baseband patch implemented.
http://www.multiupload.com/KCKE9K2WKN
worked with my .54 baseband
thanks so much for the links to the baseband patches. i remember coming across a thread that posted it but unfortunately forgot to book mark. so im definitely going to go ahead and try with the patch installed. hopefully all works well
each rom ive flashed has been done properly according to instructions. cache wiped, dalvik, and full reset as per menu options in xrecovery.
one way or another i experienced lag for the most part, and as mentioned some random crashes. never had reset on wolfs rom just error messages at times. trips rom worked excellent, smooth and quick. hopefully with the patch implemented everything will work flawlessly
thanks you guys
*Updated
Flashed over rom with baseband patch. signal working. everything running smooth.
except for when using camera zoom. zoom default displays 0x. as soon as the option is selected it spawns an immediate force close
any patches? or similar outcome for anyone else?
i will outline my steps below so everyones up to speed on how i performed this flash.
- flashed back stock in SEUS
- root with one click (success)
- installed busy box (market)
- installed xrecovery apk
- booted into xrec
1. full factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
5. install custom zip from sd card
6. selected trips rom with bb patch implemented
5. reboot
Camera zoom doesn't work in most ROMs yet and the lag you were experiencing was likely just the FW "settling" it can take a little bit and a couple reboots sometimes for the phone to calibrate itself properly.
Sent from my X10i using XDA Premium App
thanks cmoney. maybe ill try my luck with cm7. give it a few reboots and hope for the best. great rom. im really loving trips iphonesque style
clean smooth and quick. everythings working great. hoping the zoom may get fixed soon enough. only other inquiry i have with regards to this rom is the apps2sd.
this feature is essential to myself personally. and it is not working as ive noticed on this rom. ive read a thread with regards to a fix for the last release. i checked the settings for an enable option in case the feature requires being manually set as active but nothing listed. within sd settings state reads as unavailable. if anyone has an answer as to whether this fix will function with the current pre release. ill be going ahead with completeling the flash and reporting what i find back on this thread.
thanks again everyone
Try Wolfbreaks rom. It's very very stable for me. It has cam and everything upto date.
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
thesoundofsilence said:
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
Click to expand...
Click to collapse
works for me on trips newest....
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
thesoundofsilence said:
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
Click to expand...
Click to collapse
I dunno man, it works fine for me, but I copied data from my 0.3.2 xrecovery image, so that might be why. try flashing that apps2sd fix for 0.3.2, should work fine
damn it. i just found that thread. found the links to the fixes. so far ive tried miui32_a2sd_fix.zip. and flashed that over with xrec prior to reboot. which did nothing.
there are two more links so im going to try those two flashes as well and hope that one of them will do the trick. if its working when utilizing .32 patches then ideally the bloody thing would have to work here. thanks for the input though dtox. much appreciated
I don't know what else to suggest man
From the feedback I see in the miui thread, everyone else is reporting it working!
Did you factory wipe, wipe cache partition, and wipe dalvik cache before install? then flash the miui 1.0.zip, and flash immediately the baseband patch then reboot into the rom.
Remember not all apps allow apps2sd so use something like android system info, go into the applications tab click on one, click manage and then see if the option "move to sd" is highlighted. Like I said check a few though, not all apps can be moved
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
thesoundofsilence said:
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
Click to expand...
Click to collapse
Try it again but without the fix...
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
thesoundofsilence said:
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
Click to expand...
Click to collapse
No idea man, like I said it is fine for everyone else so I'm so no big development will arise that will make it function with your phone....
maybe it has something to do with 10a. i dont know. but the point is it shouldn't even be doing this regardless. hypothetically if its froyo and it has apps2sd built in. it should work. its not the way ive flashed. the phone supports it. so my only conclusion the rom must not be as compatible as stated. and from reading different posts about the prev builds sometimes the patches worked at other times they didnt. and also the fact that the rom is claimed to work without the need for a bbpatch. yet without the patch instaled phone caught no single. i guess certain unexplainable glitches can be bound to happen at times but any how ill give it one last go.
if nothing comes out of that then im giving up on that build because it seems relatively hopeless.
lol I'm using an x10a...
Still man you're the only person reporting this. Don't you find that strange? What baseband are you using anyhow?
It's currently 7am on monday morning, and I have college. I haven't slept at all because my [red lens] defy has been giving me problems.
I've been trying to re-flash CM7 to get a clean install of it, with no frills/apps that I've installed over time.
I've done a factory reset through CWM, and re-flashed CM7.1 from here:
http://download.cyanogenmod.com/?type=stable&device=umts_jordan
I've tried finding GApps for this, but to no avail. None of them install properly (CWM says they have, but actually hasn't - It's nowhere on my app drawer/home/manage apps).
I've tried adding an account to sync but when it asks what google products I want to install (such as YouTube, Maps, StreetView), it crashes mentioning "process com.teamdouche.pacman"
That's problem 1
Problem 2 is my Home and Search button no longer work! I've tried everything I could google for, but nothing has helped.
[Edit: they do vibrate, but nothing happens]
Any help on these matters would be much appreciated, as this is really annoying :/ Thanks.
Also I've just realised the apps in Manage Applications are all my old apps, even though I've actually formatted my SD card in CWM since, each has a SD card icon, and is taking up 0.00B space,but I'm just wondering how they even show there..
Did you try flashing the CM7 kernel ?
Or did you mount /system ?
Herpderp Defy.
Here's my About Phone info:
Android Version - 2.3.7
Baseband Version - EPU93_U_00.59.01
Kernel Version - 2.6.32.9-gb08c3c8 [email protected] #1
Mod version - CyanogenMod-7.2.0-RC1-Defy-KANG (CM7 White Rabbit)
http://forum.xda-developers.com/showthread.php?t=1510063 <- WhiteRabbit
Do you have a link to the CM7 Kernel? :S
System is mounted
I've managed to get Market installed, but it only opens once, and when I try to download something it Force Closes, and then after that it force closes when I open it.
Flash stock rom for noow ....
Sent from my MB525 using XDA App
dude, restore stock room, and try flashing an official cm7, what i think is that the room that you flashed is corrupted or something like that
1º: Reflash a stock room
2º: Get a official stable CM7 room ( http://download.cyanogenmod.com/?type=stable&device=umts_jordan )
3º: Don't forget to wipe all data, cache and dalvik cache.
4º: See if that works and thank me for this
EDIT:
Here is a link to Gapps, just in case (http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip )
good luck with your defy
Hi friends, as you all know, the cm10.1 rc2 has just been released. I installed mine through the ROM manager premium app. After downloading the rom, there are options for me to choose such as wipe data and backup, i checked both and hit the install button. After the android recovery screen started up everything went smoothly. Once my N7 booted up, a message showed up saying that Setup wizard stopped. I then return its state to stock unlocked and then root again. After installing rom manager and installing again, i had the same problem. So far anyone has the same problem as me? Thanks for taking the time to look at this thread and answers will be appreciated.
you dont have gapps insstalled: download and install from here: http://goo.im/gapps
Pls help me out guys, im just a newbie. So i flashed the latest nightly CM12.1 and when it booted up, system UI has stopped appeared and i cant get rid of it. I think i didn't re-enable android debugging before flashing it. Is there any way i can enable android debugging before i flash the rom and gapps again? Pls help me out guys. I think i broke my phone.
You don't need to enable debugging, its just that latest cm12.1 build is broken, I just reflashed myself because of that systemui crash, you need to reflash too. You can use version with date 2015-04-16, and then update from the phone using cm integrated updater to version 2015-05-11, because version 2015-05-13 is broken.
Same thing happened to me this morning after I flashed the Nightly of 2015-05-13. I downloaded the Nightly with CyanDelta to reduce the download size and flashed in thorough recovery. After my device booted, I noticed my wallpaper changed and I kept getting "Unfortunately, SystemUI has stopped" error. But it kept showing up every 1-2 seconds making the device unusable. So I just flashed the Nightly of 2015-05-12 which was working and the error stopped showing. Thanks to CyanDelta that keeps a copy of the old Nightly after installing a new one.
I hope that you still have the "stable" Nightly on your device to roll back to the previous Nightly. If you have access to a computer, you might be able to download it directly from CM's website, transfer it thorough USB and flash it with Recovery. That would be the only solution I can come up with beside restoring a NANdroid Backup. But I'm no pro in Android stuff, maybe someone can come up with another solution.
ExcaliburUser said:
Pls help me out guys, im just a newbie. So i flashed the latest nightly CM12.1 and when it booted up, system UI has stopped appeared and i cant get rid of it. I think i didn't re-enable android debugging before flashing it. Is there any way i can enable android debugging before i flash the rom and gapps again? Pls help me out guys. I think i broke my phone.
Click to expand...
Click to collapse
Thanks for the info bro. :good: