Hi all,
I updated my Vodafone Rom to latest HTC HERMES_HTC_WWE 1.35.255.2 & Ext Rom. I am now running on SPL-1.09.
If i wanted to re-run the same ROM i would of thought that it would be OK as all is the same. I did all the unlocking before doing the upgrade when it was on original Vadafone Rom....
Reason is that i want to wipe and restart from scratch.
Thanks for any words of wisdom.
should be safe to reapply the same rom upgrade... but for what you say, you should better do a hard reset, no need to reflash again.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Thanks alot that has worked a treat.
Also is this a known issue or not - I actually had a full backup from the previous day and decided to restore that - but once it completed i was unable to get a phone signal god knows why - is this common?
using sbp backup
cheers
madnutter said:
If i wanted to re-run the same ROM i would of thought that it would be OK as all is the same. I did all the unlocking before doing the upgrade when it was on original Vadafone Rom....
QUOTE]
Quoting myself - how silly!
Managed top figure out how to use the Mtty.exe utility today and have discovered that the HTC_Hermes_SIM_Unlock_v2a.zip did not actually set my CID to SuperCID as intended but left it as Vodap001 - I guess the reason for INVALID VENDOR ID.
I have notice that the original ROM that came with the Phone has been uploaded - HER_VODA_1201616_1030600_UK_SHIP.exe which is BL1.04
I am to understand that i can apply this if necessary to Downgrade ROM and BL from current 1.09 -> 1.04???
Click to expand...
Click to collapse
madnutter said:
I am to understand that i can apply this if necessary to Downgrade ROM and BL from current 1.09 -> 1.04???
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
pof said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
Click to expand...
Click to collapse
But on this post where you mention of the Shipped ROM, you state
"Notes on this ROM:
This is the current shipping ROM for v1605 Vodafone UK devices, it has bootloader 1.04 and CID VODAP001, so it can be used to downgrade these devices to priced bootloader 1.04 "
But reading the post over the last week i was under the impression that the Bootloader would not be done - 'until i read the recent post mentioned above'.
Thanks anyway
Sorry my fault: only 1.06 can be downgraded by flashing a rom mathcing the CID containing 1.04 bootloader, 1.09 doesn't allow itself to downgrade. I edited the post you mention and added the "1.06" part now
Hello everyone. I have just updated my radio rom to 1.34.
After reading from a few thread i found out that the radio rom 1.35 is more stable and have better reception.
How do i upgrade. Please help.
What about ... exactly like the update to 1.34 but using the file for 1.35?
I tried but it's not working.
I thought it has to do with some boot loader thingy. but i am not sure.
PLease help.
and the radio rom is remove so where can i download the radio rom 1.35
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
There is a download for 1.35.00.11, download it and follow the instructions.
You need to read this page in the link below, then follow the instructions and use the download given , then run the radio upgrade.
http://forum.xda-developers.com/showthread.php?t=293665
davidwee1987 said:
I thought it has to do with some boot loader thingy. but i am not sure.
PLease help.
and the radio rom is remove so where can i download the radio rom 1.35
Click to expand...
Click to collapse
Hi! I have DHD from asia with rom 1.32.707.5. I would like to flash it with the WWE version 1.32.405.6. I managed to root and S-Off, but what to do next?
I tried startin the RUU from the pc, it ended with an error code 131.
Can somebody help?
Thanks
Try method B from this guide.
http://forum.xda-developers.com/showthread.php?t=841890
Seems to be a much more reliable method than using the ruu program.
Sent from my performance enhanced Desire HD.
Thank you so much!! Success!!! Fantastic! Thank you, thank you)
Hi guys, this is my first post, I'll be quick.
3 months ago i got from my brother, a really nice and shiny HTC WIZARD G3 (from T-Mobile)
my bro has flashed the phone before, with a WM5 custom ROM from Tau-Rho and i have flashed the 6.5 ROM MEGAWIZARD on it, and some time later the 6.5.0 from MSD (Estrange thing: Although, i have flashed the WM Rom, the first Screen that the phone presents when we turned it on is the same than in the old WM5 rom)
Everything was working great, except for one little thing, the reception of signal on the phone was too poor, with any of the 3 roms. then i decide to test another RADIO ROM on the Wiza.
I have downloaded few RADIO_ONLY roms but i can only use the 1.x.x.x Versions. with V2.x.x.x Roms the phone just froze my wiza in boot
I have tested this radio roms:
2.17----------DON'T WORK
2.19----------DON'T WORK
2.21----------DON'T WORK
2.24----------DON'T WORK
2.25----------DON'T WORK
2.37----------DON'T WORK
2.40----------DON'T WORK
2.47----------DON'T WORK
2_47_11_radio----------DON'T WORK
2.61----------DON'T WORK
2.69----------DON'T WORK
2.71----------DON'T WORK
9100_radio_only_1.13.10----------WORK
Cingular_1.09.10_Radinly----------WORK
Cingular_2.25.11_Radinly----------DON'T WORK
faria 02.69.11----------DON'T WORK
Prodigy_2.47.11----------DON'T WORK
Qtek RadioRom 02.07.10 NLD (rip from 2180706 NLD RUU Prodigy)----------UNTESTED
Radio 2.07.10----------DON'T WORK
Radio Rom 3.02.11----------DON'T WORK
Summiter_2.17----------DON'T WORK
T-Mobile-NL_2.19.11----------DON'T WORK
T-Mobile-UK_2.19.11----------DON'T WORK
T-Mobile-US_2.24.10----------DON'T WORK
Xda-Minis_2.21.4----------DON'T WORK
I Take some screens but XDA don't let me show them..
When my cell phone boot with a working Radio Rom show this on boot:
IPL: 1.01
SPL: 1.01
GSM: 1.13.10.0
OS: 6.5.0.0
When it boot with a NOT WORKING Radio Rom Show this on boot screen:
IPL: 1.01
SPL: 1.01
OS: 6.5.0.0
and it just restart the phone after that and restart and restart and restart.
i can go back to a working radio rom, flashing it trough the BOOOTLOADER, but i need to install a newer Radio rom. My Bro told me than i should to get back to the T-Mobile WM5 Original rom to instal a newer RadioRom, i have not attempted that method yet.
Any idea to make my Wiza to boot with a newer Radio rom?
PD: Whats the difference between a .NBF and a .NBA radio rom? i have installed .nbf radio roms only.
Thank you all for your support!
i have same 1 cay you give me the link for radio 1.13.10 plz or post the url where u found those radio roms thanx in advance
sunnykhan000 said:
i have same 1 cay you give me the link for radio 1.13.10 plz or post the url where u found those radio roms thanx in advance
Click to expand...
Click to collapse
probably you can download it from here radio 1.13.10
sunnykhan000 said:
i have same 1 cay you give me the link for radio 1.13.10 plz or post the url where u found those radio roms thanx in advance
Click to expand...
Click to collapse
Hey! Do you still need the radio from? I can upload it if you need it..
Sent from my MB860 using XDA
Hi Guys,
I have this issue with my Touch P3450...while entering password for unlocking the phone...it automatically backspaces evey digit i enter to unlock the phone...due to which i am unable to use it...any body facing the same issue and any soutions for the same...have tried removing all the hardware keys to check if any thing wrong with hardware...but the same issue...have been using the phone frm last 2 yrs without any issues.... Any solutions...
Thanks in advance...
Sent from my HTC Desire S using xda premium
Very strange, try mobiler to input from desktop... But maybe it won't connect in locked mode.
Sounds like your digitizer may be damaged to me. Try my mobiler as suggested above. But I think he it right, it may not work when locked.
Sent from my Desire HD using Tapatalk
i need help on HTC-3450
i have download onyx 6.0 very and try to install it. every time it just goes to 2% and then stop n says image maybe corrupted. check your update rom utility.
even from this forum i have downloaded cid patch, and hardspl still when i go to update same error comes,
so if plz can some one guide me step by step what i should really do to update this rom on my htc p-3450 n i have brought this from uae so i dnt think its sim lock or something but plz do guide me as soon thx in advance
If you tried to flash rom before you unlocked the cid, then you are in trouble. Does your device boot normally? If yes use this tool http://forum.xda-developers.com/showthread.php?t=418892 to let us know more about it.
CID is unlocked and am using a custom rom...will sure check the link and give it a try....thanks for the info....
Sent from my HTC Desire S using xda premium
Great to hear
Could you please explain how you solved your problem so others can enjoy too ?
P's: the link was intended for madicoot
thx for the help
ok like you gave the link i followed that link, with that i got my device info, after that now what i have to do, like you said i have to unlock my cid , in that no file is include like cid unlock or something, or do i have to run that onyx 6.0 directly
Post your device info here so we can get an idea
my device info
HTC Touch device information - by dsixda
Touch version : Elf
Device ID : ELF010000
CID : HTC__J15
IPL : 1.17.0002
SPL : 1.17.0000
ROM Version : 1.17.415.3
ExtROM Version : 1.17.415.103
Operator Version: None
AKU Version : 0.2.3
Page Pool (MB) : 8
RAM Size (MB) : 64
ROM Size (MB) : 128
Model No. : ELF0300
Part Number : 99HDM058-00
SIM Unlock Code : 35219311
MCC+MNC :
ok this is my device info, now what ahead i have to do, so i can install
onyx_6_release14 but still when i run custom ruu, it goes to 2 % n says image corrupt n installation stops. plz help thx in advance
I asked you to post info so we can tell you what to do next... And obviously you're Cid locked, trying to install rom can brick your device! Can you boot normally? if not your only option is to find your original stock rom .
hi tito
yeah my phone is HTC P-3450
n other info which i got from that device info file i posted in the earlier post, yes my phone is still booting in normal mode, it just that when i try to install the onyx it gives me error of image corrupt n then it reboot n start in normal window. thx for guiding me
Ok, go to this thread and follow instructions for cid unlock and Rom flashing: http://forum.xda-developers.com/showthread.php?t=1402104&page=2 especially from post 12.
thx for the help
hi bro thanks for helping me
just one question is that i download this ELF_USPL_1.17.0000 ver as u give me the link. there are few others ver also, so which u prefer i used this one first n then in future i can upgrade others.
and one another question is that before running this patch of uspl does i have to put onyx 6.0 in the same folder of this uspl or first i have to install this verson only n it has its customer rom
then i can update to onyx 6.0
thx in advance
plz guide me for this. as i dnt want to mess my mobile before i get ur proper guide lines thx once again.
I think you should read at least 10 pages so you feel comfortable with uspl procedure, last time I did it was 2 years ago... After you get 2.28 or 3.10 you can flash hspl and only then flash onyx.
hi bro
hi tito bro thanks for your guide lines i really appreciate for ur all the help you have given me, yeaterday first i install the uspl 1.17.0000 n then it went to update rom utility itself n then i could see it was showing version spl 1.17.0001 something n ipl 1.17.0002. then i see it reboot n went like the windows i had same one. then i flash the onyx n it took n install it completely. but i still want to know that can i still update to like 2.28 spl buz i have read ur comment n then i went to few pages of those n i see that most are saying to use 2.26 n then update to 2.28 spl n 2.26 ipl to get better speed and to have fast application run, so now can i do that spl 2.28 n ipl 2.26 update ?
and after i do that update does i have to flash onyx 6.0 again ?
thanks for your time
You are running too fast mate, you have to get higher SPL then upgrade to corresponding Hspl and only then install Onyx. Read the FAQ in Onyx thread!
Ps: you can directly upgrade to 2.28 SPL
hi
hi bro
well as u said i upgrade the spl to 2.28 but i dnt know still ipl is showing 1.17.0002 only, does that i have to install in another way, buz last time when i install spl 1.17.000 after update i see the ipl was showing 1.17.0002 but now when i update it to 2.28 spl. still ipl is showing the older ver only n not showing 2.27, or does its like i have to copy that .nbh file to that rom utility n replace with the one inside have n then update it?
n another problem is that b4 doing spl first time i forgot to take the backup of my original rom, so now i am afraid that if i do anything wrong maybe phone will stop completely working.
When using ruu make sure there's only one nbh, and as for backup, well it's too late to worry, think positive
thx
Hi bro
thx for your guide lines, ok now today i have updated ipl and now the version is showing
IPL : 2.27.0002
SPL : 2.28.0000
so now what next time i should do.
ok but one thing i want to tell u is that the windows my mobile boot is onyx only,
as i dint had back i dint took risk of formating n start to install all from first, so i am just doing updating as u guiding, so now as the ipl & spl is update, what step i have to do, pls let me know. so i will go n read n then take ur more guide lines to move ahead
thx alot in advance to helping me