I am in GingerDX and i havent done any changes with kernel
When i try to flash the below mentioned kernel via flashtool it shows unable to flash -
X8_08a-GDX_Alfs&Djnilse.ftf
1.i am in flashmode
2.installed all drives (flshtool detects my mobile)
PLS HELPP
did you unlock the BL?
and why did you make 2 threads with the same question?
Related
hi everybody, unfortunately my meizu m2 note is probably dead, and i dont know why i was try to install cm, i unlocked the bootloader successfully, and the i proceed to install the twrp. and here come the problem. i was using flash tool, i select recovery, but then an error (if i remember well it was this "brom error s_dl_get_dram_setting_fail") and then nothing else worked, phone doesnt boot up, but i think pc still recognize it, because it make a sound when i connect it. What can i do to revive it? pls help :crying::crying:
you failed to unlock bootloader
you should visit this thread you will find how to unbrick it UNBRICK A PAPERWEIGHT
HERE
same problem. any solution? my computer can detect the phone but the sp flash tools cannot.
hey guys , today my phone (lenovo vibe p1ma40 ) got bricked , but the charging indicator light (the red one) still works when it is connected to the charger or pc , also the pc recognize the device as mediaTek usb port . All i did was , just tried to flash twrp3.1.1 img through the twrp custom recovery itself ,
after that the device didnt boot,
is it possible to resolve the problem ?
plz help guys :cyclops: :cyclops:
c0D3cr4k3r said:
hey guys , today my phone (lenovo vibe p1ma40 ) got bricked , but the charging indicator light (the red one) still works when it is connected to the charger or pc , also the pc recognize the device as mediaTek usb port . All i did was , just tried to flash twrp3.1.1 img through the twrp custom recovery itself ,
after that the device didnt boot,
is it possible to resolve the problem ?
plz help guys :cyclops: :cyclops:
Click to expand...
Click to collapse
Just re-flash your phone's stock ROM using SP Flash Tool and flash the latest TWRP using ADB.
Guide to install stock ROM: http://www.gsmhelpful.com/2017/06/how-to-flash-lenovo-vibe-p1ma40-with-sp-flash-tool.html
Download and install ADB: http://www.teamandroid.com/2017/04/25/download-minimal-adb-fastboot/
And thas all, just flash your TWRP image using ADB
im having same issue but pc isnt detecting the device anymore. only charging led is showing
I have hard bricked my Lenovo p1ma40 ,only charging indicator is on and pc is not able to detect the usb device ,how to solve this issue .
c0D3cr4k3r said:
hey guys , today my phone (lenovo vibe p1ma40 ) got bricked , but the charging indicator light (the red one) still works when it is connected to the charger or pc , also the pc recognize the device as mediaTek usb port . All i did was , just tried to flash twrp3.1.1 img through the twrp custom recovery itself ,
after that the device didnt boot,
is it possible to resolve the problem ?
plz help guys :cyclops: :cyclops:
Click to expand...
Click to collapse
It happens because you may have flashed a corrupted twrp or other kernel twrp..
Just Flash stock rom with Sp flash tool..It'll be back..
(or) flash recovery.img & boot.img from the given link..
https://drive.google.com/open?id=1RbdBJFL0Czk5I6MgZW2-Yi827otYetml
Follow my video tutorial: https://youtu.be/-nzWrcZPRdU
If you don't have pc then,,
press volume up & power button then clear eMMc or factory reset.
remember it'll be in chinese language..
If it won't reboot then you have flash stock rom...
Hey a friend of mine has a redmi pro .. why trying to open the phone but after sucess flash on sp flash tool the phone get into bootloop on the mi logo and keeps restarts itself .. we tried to flash twrp but seems that the BL is locked and we cant flash it, might an idea would be flash a custom rom through TWRP recovery but didnt help since we cant flash twrp .. any idea how to fix it ? I followed this video bellow but nothing changed .. Tried also on Sp flash tool Download only, Firmware Upgrade etc .. all the same problem ..
https://www.youtube.com/watch?v=-CuMZzdEQg8&t=202s
Hi i have a Jiayu S3 which for the second time breaks up firstly from my official rom crashed unknown why and my brother managed to relive it installing twrp recovery and xtreme rom. Now againb crashed and enter in a bootloop while surfing on the net. I have to mention that i have [email protected] up my devive some time ago and cannot connencted via usb (pc or usb stick) things that used to do very often. Know i manage to get ito recovery install miui 9 rom(from need rom) but reboot continiously....get back to xtreme (from need rom again) and reboot continously...tried miui 7 rom boot loop again. So i stuck to boot loop!!! i can not use SP flash tools because my PC refuses to intall the correct MTK, MEDIATEK MT66XX or any VCOM ,usb etc drivers (( . It only sees my device as a composite device. I can't use fastboot as long as i don't know how to do it and how i can connect my device to pc . Please help is there any way i can get out of bootloop via sd card from recovery mode?? I am exhausted reading and searching and watching tutorials....Thanks in advance.
PS i manage only 2 times to enter in a chinese mode(black screen) but i don't know how to proceed in that and what does this mode do.
Still no one to help??
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
giolandis said:
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
Click to expand...
Click to collapse
Hi,
can you flash a ROM using SP-Flash Tools? With SPF you don't need the mobile to be switched on. Of course drivers for MTK must be installed properly before doing this. Maybe clearing cache and Dalvik could help as well.
Dear members, this is my first post and the problem is very complicted, so please bear with the long post
Device details:
LeEco Le1s (x500)
MTK6795 chipset
3 GB + 32 GB (Everybody knows )
Background:
I downgraded my ROM from 19s to 14s with SP Flash tool and the phone booted normally. I went through the initial setup, unlocked Developer mode and USB debugging. Then I opened the adb toolkit on Win 7 x86 machine to unlock bootloader and install twrp custom recovery at single go (instead of letting phone rebot after bootloader unlock and then proceeding with recovery flashing).
Now phone went to soft brick, to overcome which I needed to flash userdata with sp flash tool (I have done this in past also following a tutorial, the same files were used this time). But flashing process resulted in BROM error and I was not successful.
So, I re-flashed the original 14s rom via SP flash tool to get the things back to working, but phone didn't boot properly and bootloop situation was still there. I again reflashed the same ROM and this timephone entered red light of death mode, and didn't boot up after flashing original rom.
Now, I again googled this problem and found that we need to format flash with bootloader. Here the problem complicated further.
As soon as I formatted the flash and the bootloader, laptop stopped detecting the phone via usb cable. Now I can't flash any rom using SP flash tool as the phone is not detectable.
I have reinstalled my windows 7 32 bit operating system and reinstalled all the drivers for MTK smartphone. I have another Le1s phone running on 19s version of EUI marshmallow with stock recovery and locked bootloader which is detecting fine without problems.
Please guide me how can I resolve the problem.
Also guide if the other phone can anyhow help in this matter in terms of software backup for SP flash tool (I couldn't find a way of backing stock rom using SP flash tools.
Problem summary:
1) Flash with bootloader formatted
2) Phone is not detectable on Windows 7 32 bit OS and latest SP flash tools
3) Red LED turns on when phone connected to charger or laptop via usb cable,nothing on LCD display
4) Can't reach bootloader or recovery either
Help will be really appreciated. You all know the value of data stored on smartphones.
Thanks in advance!!
can explain how you were able to solve it?
facing a similar issue would ne helpful.
thanks.