Hi,
I was running the latest CM9 build on my defy. Today i wanted to install the stock firmware using rsdlite. I tied both 4.9 and 5.6 versions. Something has gone wrong but i don't know what.
I can enter the bootloader and the phone boots but hangs at the boot animation. I tried several sbf's but this is the only one which goes into bootmode.
Are there any other things i can try? Is there any way i can read out the cg or anything?
Hope anybody can help me out
Related
hi guys i need ur help
i flashed full 2.3.4 spf on my defy
i didnt like it so i downgraded it using this guide
http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143
i have followed the steps one by one and every thing worked just fine
now im on froyo that camed with the guide
but every time i try to flash spf using rsd lite it says finished 100% then pass
and my phone dosent but up
no screen no power and i cant accsess to recovery mode or boot mood
but when i log in the boot mood the rsd lite see it but my phone screens still off
any ways i have flashed to eclair that came with the guide and my phone is working again
i have tried to flash another spf the same a black screen with no power
now im back with that fixed eclair that came with the guide
any one can help me and tell me why i keep getting black screen when ever i flash
any one can help me please ?
thanks in advance
I think that is because you flashed a level 5 sbf so you can flash a full sbf with level greater or equal than 5
Motorola Defy CM7 RC 1.5 OC 1GHz
Easy thing first, wipe. Check motto drivers and check if you are installing correct sbf. when it says pass, don't unplug phone. Wait for it to restart itself then wipe again
Got a Headache? It's all in your Head.
You flashed full 2.3.4 sbf which contains CG31.smg and CG39.smg ver=5
from now on you are stuck with limited options of downgrade. There is no possible way to flash a sbf which contains CG ver less than 5 now. "downgrade" to you now means you will have to restore nandroid and then flash fixed sbf which has had CG31 and CG39 replaced with those two Code Groups from one which is of ver=5. I'm not sure, but "maybe" you can flash any sbf you like and then flash fixed sbf from that sbf with these two code groups replaced with one containg CG=5
There's a Eclair (2.1) Chinese SBF with CG level 5. Use that, root, install 2ndinit, flash a fixed SBF.
Don't use the camera flash though!
Good idea!
But the fact remains that he is always stuck with CG31 and CG39 at level 5. Regardless of how he downgrades this will never change. As far as warranty purposes it will never be possible unless his region officially releases a system containing these two CG's at level 5. It is nice though to be able to "downgrade" and still install custom roms and stock froyo roms and the like but ALL of these will still need a fixed sbf containing level 5 CG31
Follow the steps from this tutorial and you will succeed.
so, I bricked my defy
I was on cm7 7.2 kang, then I flashed the white rabbit and that was ok
after that I accidentaly flashed the miui rom pikachu without a wipe
and was stuck at boot logo...
so I downloaded the 2.2.2 Service Flash Central Europe because nordic was unavailable
now, all I got is the white led on the defy, can't even boot into bootloader
what to do?
what sbf should I use??
please help
Many others with the same problem:
http://forum.xda-developers.com/showthread.php?t=1505109
Can you remember what previous sbf's you flashed?
Normally RDS will detect your phone when you plug it in.
Try to remember witch sbf's you have flashed and flash one with the same bl number.
You can try to download the sbf again and install it from a different pc. If you think you never flashed a gingerbread rom.
For a good link to the CEE sbf:
http://sbf.droid-developers.org/umt...RDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf.gz
read before you flash
i thought it is near impossible to brick defy as its boot loader is locked ... reading saves a lot of time.
vsvj said:
i thought it is near impossible to brick defy as its boot loader is locked ... reading saves a lot of time.
Click to expand...
Click to collapse
You CAN brick it . If you get a power-out on the exact wrong time f.i.
Or you use a USB-cable with a knick in it...
Best thing is not to flash a rom with a bl version higher than your official released as then you can always claim warranty (If your not over the warranty data of course)
Hi, I'm looking for a sbf file for my Defy (not +, red lens) with a CG version 5 or higher.
It's because I bricked my Defy so I flashed this sbf : JORDN_U3_97.21.51
It's US T-Mobile version so I can't phone in France with Orange. Someone told me it's a CG version 5.
If you have a solution to phone with this version in France, I'm taking it too
Thank you
So your phone is working but you have no signal or what?
ehhm, what do you want to do ???
is your phone booting and ready to go on the home screen? then you don't have to flash any sbf ...
if you can not call due to wrong baseband, there is a tool calles "Defy Baseband Switcher", that changes the Baseband to e.g. france orang version ...
hoped to help you ... and if so, please click "thanks"-button
The ~ same thing
I accidentaly installed the CM9 kernel when i should have installed the CM7 one with ICS. Then i made a nandroid restore of my previous CM7. Than... phone dead. Starting but no CWM no ROM booting.
As i have had CM7 with GB kernel i flashed ( not knowing) an old SBF than didn't booted. I tried the US T-Mobile 2.5.1. It boots, i can root it, install CWM.
But than when i try to install a CM7 nightly ( installed ok) it dies again. Starts but No CWM no Rom booting.
What to do? I don't know what SBF to flash or what method to install?
DJ_Synergy said:
ehhm, what do you want to do ???
is your phone booting and ready to go on the home screen? then you don't have to flash any sbf ...
if you can not call due to wrong baseband, there is a tool calles "Defy Baseband Switcher", that changes the Baseband to e.g. france orang version ...
hoped to help you ... and if so, please click "thanks"-button
Click to expand...
Click to collapse
I tried Defy Baseband Switcher but it doesn't work. Thank you anyway.
SBF
You can download all the SBF's from the Wiki Page( Defy General Thread). But you are in my case. I have a thread opened in the Q&A. That SBF you installed is dreadful. So after 2 nights of searching until 4 am i got smth to work. For the record i didn't install a GB SBF. I wanted a Froyo one. The one that worked for me is this one > http://forum.xda-developers.com/show...1&highlight=cg
Follow the first guide. Go to Recovery Wipe data/cache, reboot with volume up pressed. Enter programming. Flash SBF. It starts in Chinese. Don't worry. On the first screen you see press the button/box (with Chinese writing) in the middle of the screen> select English> then Next> then press Later (as you don't need the MotoBlur crap). Than Root it with Superoneclick, install CWM and flash whatever ROM you like.
Warning: Do not turn the flash on the camera. With the Kernel on this SBF you will burn it. Install another Froyo Kernel with your ROM. Don't know how> ask.
Thank you but your link is dead...
Link update:
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=cg
The one you installed is BL5. You can try the froyo above. Or someone PM'ed a couple o minutes ago with this option for the Eclair SBF:Root, install the cwm. Then wipe data, install kernel don't reboot and install cm7. I tried it and it did not work but maybe it works for you. Also if you don't know how to root the Eclair sbf you must do the following> Flash 2.21 , Run the archive(USB debugging On), let it finish/close by itself, flash the 2.51. Sorry, i can't attach files.. will try later
Hey guys, I've got a Defy plus (MB526) which had CGM 9 on it.
One day i woke up to find it boot looping, for no reason at all...
Now, i've tried flashing it with countless different roms. first just bricking it up, so the screen stopped lighting up at all...
Then i found out it had a CG version 7 so i can't use anything lower.
now i've tried flashing like 5-6 different roms i found that shoul suit, but the best result i got is going back to boot looping, so the screen lights up, but is stuck on the Motorola logo...
The phone was bought refurbished, so idk what was its' original operator. I've tried pretty much every one tho...
I'm using RSDlite 5.6 to flash it.
Any thoughts?
try the custom sbf for Defy, there are one with CM10 inside.
Jelly powered.Defy
Hello guys,
I got one Droid Pro EU version from my friend, he tried to flash phone with this SBF file: VRZ_XT610_4.6.8_user_signed_1FF.sbf because he had some boot loop problem. He is a little bit crazy and dont know to much about flashing phones and "IT" at all. I dont know why he even tried to flash... But after flash his phone cant boot, there is this error in Bootloader (v. 03.0C):
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Reqd
Before flash he had in the phone 2.3.3 CM7. Boot to recovery is not possible.
Any idea what version of SBF should I try to flash for fix it? Or is it even fixable?
And what about the "VRZ" in the name of SBF. Isnt it shortcut for "Verizon"?
Thanks in advance
UPDATE 04/02/2012 21:22: I successfully bring the phone up by flashing this sbf VIILA_U4_4.5.2_51-28_R01_SIGNED_STABLE45LAVENUSGBPERAR_P012_A027_M003_HWp3_Service1FF.sbf
(I found on web some another cases, bricked Droid Pro, and this SBF helps them).
Phone is running, so tomorrow will be continuing. (Checking of GSM, root and flash of CM7). I hope other problems will not occur.