Database Users

[Q] HTC Wildfire bricked? need help /will give reward

hello i just wanted to see if i still could get help with my useless device
Ok so yesterday ive rooted the phone and today i tried to install cyanogen mod 7 rom
i used rom utility which i ve downlaoded from android marketplace
now sometimes my phone boots and gets to the logo loop
ive heard that clearing cache and settings would work but i cant access these menus as my hboot is not reacting to my key presses , i tried to reflash the phone but nothing came with success.
I used android sdk and RUU but nothing with success .
maybe anyone would teamview me or give me step by step tutorial how to get this phone alive again would be appreciated
You will be rewarded

You rooted the Phone with a App from the Market?
You need if your HBoot is lower then 1.* the unrEVOked Tool.
If its 1.* there is no way to flash it.
Okay, maybe it worked with yout root app from the market, dunno, but i dont think so.
So you cant access while pressing volume down (keep holding) and switching on the phone the bootmanager? oO thats no good.
The Logo will stay up to "15minutes (<-?)" after flashing a new Rom. In this time its possible, that you Phone restarts automaticly. its normal. Switch it on an wait up to an half hour. If it keep staying in the boot sequence while showing the logo you got a problem .
I think there isnt a more unsave way than a "Flash by teamviewer". You have also pay attention to the phone while flashing. on TV you cant keep an eye on it.
But how can you reflash your phone without getting access to the bootmanager/ HBoot? I think you habe to access the clockwork to flash cm7 *thinking*.

If u nowhow to use adb try n get a adb logcat if possible
Sent from my HTC Wildfire using XDA App

Hi borris and daddyspud thanks for your reply ,i cant move around in hboot ,my hboot version i 0.80.0003
Ive rooted it using unrevoked with clockwork mod on it.
now even when i get it to boot it just loops in cyanogen animation,should i leave it for 15 minutes to do its thing?
also im new to this so i dont know anything about sdk and adb,all i did is saw the tutorials using it ,so i thought i would use it just to give it a go

HBoot 0.8 is rootable, so its okay.
If there is still an animation while you see the CM Logo everything is fine.
If it freeze for some minutes is there a problem. The Animation shows you "i am working / installing".
Yes, let him do his thing for some Minutes.
I think everting should be okay and after some minutes it will work like normal.
It reboots sometimes it self, but this is also okay.
I dont know... does the new CM7 also install a new HBoot? So its possible why you cant move around in it.
Do you wait about 10 seconds before you try to move around in it? Because in the first seconds it looks like it freezed an then it start a test or something. this takes about 10seconds then you can use it.

Its not bricked if its turning on.
Can you get into recovery? If you can try flashing the 4.1 kernel.
If that doesnt help, go into recovery and do a full wipe. Clear cache and dalvik, and under partitions menu format everything except SD card. Then flash CM7, then the 4.1 kernel
Remember first boot will take 10-15 minutes. Be patient. If youve done everything right you shouldnt have any problems

Hi and thanks for cooperation ,i left my phone on cyanogen animation for an hour and nothing is happening just animation loop constantly.
I've just tried hboot and it searches for the PC 49 DIAG and says not found after that it freezes and i cant use any menu navigation buttons . in hbot and fastboot.
I dont even know what to do next
Much help appreciated guys

oO
thats weird.
the PC49DIAG is a part of the rom it self. So i think you have to try to re-flash it. Did you try it with or without a goldcard?
before you flash your phone whipe ALL datas on it!!!
If i start in bootloader mode i get also all the "missing" errors but i can still use the vol up/down buttons to navigate around.
That should help.
I think you did something wrong while flashing.
the root failed?
you got an error while flashing?
goldcard?
Try to flash a RUU from shipped roms. DONT flash a Froyo rom, you will get the HBoot 1.* if you do this.
Recoverymode doesnt work in the hboot?
If you try recoverymode you will get a blackscreen with an triangle.
most say "press the power button" to enter the recovery mode. if this doesnt work press the "volum up button (hold it) then the power button" this should enter recovery mode.
**EDIT**
http://shipped-roms.com/index.php?category=android&model=Buzz use a www-rom its without a branding. and use a RUU rom.. and pls dont use a froyo rom. after flashing this your root is gone i think but your phone will be alive again.
dont try the cm7 this time. use a stock rom.

is it alive again?
i talked today to someone who hat exactly the same problem like you.
it was simple to fix the problem... he (you also?) didnt
whipe the phone before he flashed the cm7. thats why it wont stop looping
in the cm7 animation.
after whiping and reflashing everything was fine.
... did you whipe it b4 flashing?

[Q] Defy M motorola locked boot and recovery will not open!

good night friends!
I'm here asking for this help not for lack of looking for the solution, sorry my bad english, I'm from Brazil and I
defy caught in a bootloader, I tried almost everything I found here in the forum, but most of the problems is
reset solved by making the recovery, but in my defy the recovery does not open, the flash works only power + vol up, already
I spent several roms to no avail, could someone help me run my recovery? grateful heart
list of roms flashead
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FFJORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbfz
JORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbf
JRDNEM_U3_2.34.1_DEBLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA02B.0R_USAJORDANRTCEE_P029_A019_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTHKTW_P021_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_3.4.2_164-003_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFFR03A.0R_PDS03C_USAJRDNFRYOVFFR_P028_A014_M004_HWp3_Service1FF.sbf
Motorola_Defy_Nu___Android_2.2_FroYo
shadow_defy_2.3.3_85_Orange

If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(

mmec2 said:
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
Click to expand...
Click to collapse
I really can not, no way to go to the screen with the robot android! he goes right on the logo motorola M!
can it be hardware problem?

1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.

farsight73 said:
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
Click to expand...
Click to collapse
I'm using motorola rsd 4.9 with updated drivers, what happens is install the rom normal after reboot gets stuck in the Motorola M logo, the software update site does not recognize my phone, do all these roms that I would be no my phone?
im tried this roms now
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF
3.4.3_11-Stock.UKTmobile_BLUR
but no results!

don't worry about it, dude.
maybe you can try the way followed:
1.power off your defy;
2.remove the battery from the phone;
3.plug the usb cable into the phone without battery;
4.open RSD and chose one of the roms your listed, but 3.4.2-177-005 NORDIC prefered,
5.take the battery into your phone, now your can see the "connected" on RSD;
6.click the "start" button to flash;
7.wait the phone reboot completely, usually it'll reboot.
if not reboot, remove and on your battery, power on your phone, then press the "volume - and power" botton together, you can enter the robot screen, press volume up and down botton together, usually you can enter the recovery, then chose wipe 3 and 4, totally you can save your defy~~

Be sure to have enough battery while flashing..

Get the phone into bootloader (hold volume down when switch on) and flash an SBF like one from the list you've attached using RSD lite. Surely you have used RSD Lite before?

It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.

jdearauj said:
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
Click to expand...
Click to collapse
This same friend, I have the same problem, is this a hardware problem? I move the roms but not normal
Vol I login recovery - + Power key

http://forum.xda-developers.com/showthread.php?t=966537
Try flashing nordic, if fails arabic, if fails, 2.3.3, if fails probably corrupt nand broken hardware.
Before and after every flash always try to access recovery (volume down) and WIPE. reboot and wait crossing fingers, if it fails to boot flash next sbf, try to go recovery + wipe; reboot, cross more fingers; if fails to boot try next sbf and repeat.
The reason for this is that you can flash a lower version but it wont boot, so you have to flash a higher and higher version until you get one that works.

I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!

zyxwvut said:
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
Click to expand...
Click to collapse
OMG Exactly!!!! i have same problem and nobody seems to be able to tell me what to do, they keep saying same thing about trying various SBF's and Vol down + power method. No matter what SBF file I successfully flash with, i cannot get into boot recovery mode.

I have heard before from desperate users that they were able to revive their phone by flashing a full 2.3.4 sbf. This however comes with downsides of not being able to downgrade to froyo by flashing ANY froyo sbf's. There is a way to downgrade back to froyo but its a dirty method. Even after downgrade you can't just flash a sbf, you will always need to restore nandroid and flash fixed sbf

[Q] atrix restarting help

hi everybody I am new here and using atrix 4g and I need help I was update my att atrix 2.3.4 official gingerbread and today my phone is always restarting not opening . red motorola logo passing and att logo came then restart itself always doing this not giving any error . I can enter the fastboot menu and try to make android revovery but not working what is the problem do you know ? the phone heating

spaydix said:
hi everybody I am new here and using atrix 4g and I need help I was update my att atrix 2.3.4 official gingerbread and today my phone is always restarting not opening . red motorola logo passing and att logo came then restart itself always doing this not giving any error . I can enter the fastboot menu and try to make android revovery but not working what is the problem do you know ? the phone heating
Click to expand...
Click to collapse
my advice:
try wiping data/cache first... if it doesn't help -> pull battery off... wait 2 minutes... put it back, power on in RSD mode (volume up + power)... flash official AT&T 2.3.4 SBF (if you don't care about unlocking or modding).... wipe data/cache...

Marcio_Bianco said:
my advice:
try wiping data/cache first... if it doesn't help -> pull battery off... wait 2 minutes... put it back, power on in RSD mode (volume up + power)... flash official AT&T 2.3.4 SBF (if you don't care about unlocking or modding).... wipe data/cache...
Click to expand...
Click to collapse
thanks you so much wipe data is work the phone is working now

[Q] [q] heelp mee pleaase !!

heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..

Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.

ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!

but i didnt came anymore to the homescreen , or lock screen

Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App

The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk

Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App

THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?

Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk

THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((

You are very welcome
sent using tapatalk

[Q] Defy Plus No Recovery

Hi,
I have had my motorola Defy Plus running cyanogen for a year or so. Various versions, 2nd init.
Recently I decided to upgrade to Cyanogen version http://forum.xda-developers.com/showthread.php?t=2515036
Got it installed and running ok but there were some glitches (maybe) so I started from scratch to be sure.
The method I used to completely re-initialise the phone is as follows.
repartitioned SD, wiped and flashed
DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
booted into stock android. installed framaroot - rooted.
installed 2nd init
installed twrp
updated recovery
wipe/reset
install cyanogen
The first time I did this it worked (but with some gapps glitches so to trouble shoot I thought I would start again.
Now this is the problem.
the second time when I tried to flash the stock rom RSD lite hung with "please manually reboot the phone"
After this it is impossible to get into stock recovery from the android triangle screen. When pressing both volume buttons the only thing that happens is the screen brightness toggles between light and dim.
I can get the phone to connect to RSD lite and I can flash ROMS - I have tried a few but I cannot get recovery, Always after flashing RSD says please manually reboot phone. The automatic reboot does nothing but get to the motorola or triangle screen, or a black screen sometimes.
Just to clarify - I have googled and tried many solutions, the main problem is that there is no stock recovery from the triangle screen so no solution that relies on this is working,
Any help appreciated. Thanks.

Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?

pgreed said:
Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?
Click to expand...
Click to collapse
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.

deMangler said:
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.
Click to expand...
Click to collapse
I think what would solve my problem would be a way of installing the above rom (which I believe includes the bootloader). I need to solve the problem of the flashing not progressing beyond the reboot stage.
I am using RSD Lite version 6.1.4
Any help appreciated. Thanks.

Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.

pgreed said:
Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.
Click to expand...
Click to collapse
There is no functioning recovery, so it is impossible to do a wipe. It is possible to flash a stock ROM (which should restore the recovery) using RSD lite but the process does not get past the reboot stage.

download again the sbf or flash another sbf.

pgreed said:
download again the sbf or flash another sbf.
Click to expand...
Click to collapse
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.

deMangler said:
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.
Click to expand...
Click to collapse
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.

pgreed said:
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.
Click to expand...
Click to collapse
Thanks - I will let you know if it works.

deMangler said:
Thanks - I will let you know if it works.
Click to expand...
Click to collapse
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.

same here - but your report helped!
I had the same problem and did what you did... boot with vol+down and power and got to the triangle. then press UP+DOWN fast after another. what follows is the recovery!
propov said:
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.
Click to expand...
Click to collapse